Tailored thin film nanocomposite membrane incorporated with Noria for simultaneously overcoming the permeability-selectivity trade-off and the membrane fouling in nanofiltration process

Fabrication of eco-friendly nanocellulose-chitosan-calcium phosphate ternary nanocomposite for wastewater remediation

Nanocomposites have emerged as promising materials for pollutant removal due to their unique properties. However, conventional synthesis methods often involve toxic solvents or expensive materials. In this study, we present a novel ternary nanocomposite synthesized via a simple, cost-effective vacuum filtration method. The composite consists of calcium phosphate (CaP), biowaste-derived nanocellulose (diameter <50 nm) (NC), and chitosan (CH). The nanocomposite exhibited exceptional pollutant removal capabilities due to the hybrid approach of combining adsorption and size exclusion that widens and accelerates pollutant removal. When tested with synthetic wastewater containing 10 ppm of Ni ions and 10 ppm of Congo red (CR) dye, it achieved impressive removal rates of 98.7% for Ni ions and 100% for CR dye. Moreover, the nanocomposite effectively removed heavy metals such as Cd, Ag, Al, Fe, Hg, Mo, Li, and Se at 100%, and Ba, Be, P, and Zn at 80%, 92%, 87%, and 97%, respectively, from real-world municipal wastewater. Importantly, this green nanocomposite membrane was synthesized without the use of harmful chemicals or complex modifications and operated at a high flux rate of 146 L/m2.h.MPa. Its outstanding performance highlights its potential for sustainable pollutant removal applications.

Micelles regulated thin film nanocomposite membrane with enhanced nanofiltration performance

The desalination performance of thin film nanocomposite (TFN) membranes is significantly influenced by the nature of nanofillers and the structure of the polyamide (PA) layer. Herein, a micelles regulated interfacial polymerization (MRIP) strategy is reported for the preparation of TFN membranes with enhanced nanofiltration (NF) performance. Specially, stable and ultrafine micelles, synthesized from the poly(ethylene oxide)-b-poly(4-vinyl pyridine)-b-polystyrene (PEO-PVP-PS) triblock copolymers, were utilized as regulators in the aqueous phase during the interfacial polymerization (IP) process. TFN membranes were fabricated with varying concentrations of micelles to improve their properties and performances. The structure of the PA layer was further regulated by modulating the content of trimesoyl chloride (TMC), which significantly enhances the performance of the TFN membrane with micelles. Attributable to the homogeneously dispersed micelles and the modified PA layer, the optimized membrane denoted as TFN-2-0.3 exhibits an improved separation performance of 20.7 L m-2h-1 bar-1 and 99.3 % Na2SO4 rejection, demonstrating nearly twice the permeance and 2.7 % higher rejection than that of the original control membrane, respectively. The mechanism of this MRIP strategy was investigated through the diffusion experiments of piperazine (PIP) and interfacial tension tests. The incorporated micelles effectively lower the interfacial tension, promote the diffusion of PIP and accelerate the IP reaction, resulting in a denser and thinner PA layer. Collectively, these findings demonstrate that TFN membranes with micelles exhibit increased roughness, enhanced hydrophilicity, superior rejection to divalent salts, and better acid-base resistance, highlighting their potential applications in the design of TFN membranes.

Simple bio-inspired coating of ureteral stent for protein and bacterial fouling and calcium encrustation control

Encrustation, caused by deposition of calcium and magnesium salts present in urine, is a common problem of indwelling urinary devices, such as ureteral stent. Encrustation was also found to be related to urinary tract infections; thus, it is necessary to prepare ureteral stents with antibacterial and antifouling surfaces to mitigate the occurrence of encrustation. In this study, commercial ureteral stent was coated with polydopamine (PDA), formed from self-polymerization of dopamine. The PDA coating was optimized in terms of dopamine concentration, pH, and coating time using response surface methodology. The chosen response parameters for optimization were calcium oxalate (CaC₂ O₄ ) encrustation and protein adsorption. Optimized PDA coating conditions were determined to be the following: pH 9.0, 2 mg/mL DA, and 3 days coating. The optimized PDA-coated ureteral stent exhibited outstanding resistance against CaC₂ O₄ encrustation, protein fouling, and bacterial adhesion due to its hydrophilic and functional coating layer. In comparison with the pristine ureteral stent, PDA coating was able to suppress approximately 97% and 87% of CaC₂ O₄ and protein adsorption, respectively. The PDA-coated ureteral stent was compared against those of commercially available ureteral stents and found to have superior encrustation and protein fouling mitigation performance. Finally, PDA coating was found to be highly stable for a storage period of 90 days, whether stored in wet or dry conditions.

An Overview of the Modification Strategies in Developing Antifouling Nanofiltration Membranes

Freshwater deficiency has become a significant issue affecting many nations' social and economic development because of the fast-growing demand for water resources. Nanofiltration (NF) is one of the promising technologies for water reclamation application, particularly in desalination, water, and wastewater treatment fields. Nevertheless, membrane fouling remains a significant concern since it can reduce the NF membrane performance and increase operating expenses. Consequently, numerous studies have focused on improving the NF membrane's resistance to fouling. This review highlights the recent progress in NF modification strategies using three types of antifouling modifiers, i.e., nanoparticles, polymers, and composite polymer/nanoparticles. The correlation between antifouling performance and membrane properties such as hydrophilicity, surface chemistry, surface charge, and morphology are discussed. The challenges and perspectives regarding antifouling modifiers and modification strategies conclude this review.

Nanofiltration Membranes with Crumpled Polyamide Films: A Critical Review on Mechanisms, Performances, and Environmental Applications

Nanofiltration (NF) membranes have been widely applied in many important environmental applications, including water softening, surface/groundwater purification, wastewater treatment, and water reuse. In recent years, a new class of piperazine (PIP)-based NF membranes featuring a crumpled polyamide layer has received considerable attention because of their great potential for achieving dramatic improvements in membrane separation performance. Since the report of novel crumpled Turing structures that exhibited an order of magnitude enhancement in water permeance ( Science 2018, 360 (6388), 518-521), the number of published research papers on this emerging topic has grown exponentially to approximately 200. In this critical review, we provide a systematic framework to classify the crumpled NF morphologies. The fundamental mechanisms and fabrication methods involved in the formation of these crumpled morphologies are summarized. We then discuss the transport of water and solutes in crumpled NF membranes and how these transport phenomena could simultaneously improve membrane water permeance, selectivity, and antifouling performance. The environmental applications of these emerging NF membranes are highlighted, and future research opportunities/needs are identified. The fundamental insights in this review provide critical guidance on the further development of high-performance NF membranes tailored for a wide range of environmental applications.

Preparation of Ni@UiO-66 incorporated polyethersulfone (PES) membrane by magnetic field assisted strategy to improve permeability and photocatalytic self-cleaning ability

Metal-organic frameworks (MOFs) have been considered as promising nanofillers to fabricate mixed matrix membranes for water treatment. However, manipulating distribution of MOFs nanoparticles in the membrane matrix remains a great challenge. In this study, UiO-66 was firstly coated by magnetic Ni via an in-situ reduction reaction, and then incorporated into polyethersulfone (PES) membrane matrix to prepare PES-Ni@UiO-66 membrane. The magnetic Ni allowed to manipulate the distribution of magnetic Ni@UiO-66 in the phase-inversion process by an external magnetic field. The hydrophilic Ni@UiO-66 can be pulled onto membrane surface by the magnetic force, endowing the prepared membrane with rather higher hydrophilicity. The prepared membrane exhibited superior water permeability with a pure water flux of 611.5 ± 19.8 L·m^-2·h^-1 and improved antifouling performance. Moreover, benifiting from photocatalytic activity of the exposed Ni@UiO-66 on membrane surface, the obtained PES-Ni@UiO-66 membrane demonstrated excellent photocatalytic self-cleaning ability with a flux recovery rate (FRR) higher than 95% under UV irradiation. Analyzing by extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory indicated that the improved antifouling performance could be attributed to less attractive or even repulsive interaction between the prepared membrane and pollutants. This work provided valuable guidance for structural regulation and development of high-performance MOFs-based membranes for water treatment.

In Situ Chemical Modification with Zwitterionic Copolymers of Nanofiltration Membranes: Cure for the Trade-Off between Filtration and Antifouling Performance

Breaking the trade-off between filtration performance and antifouling property is critical to enabling a thin-film nanocomposite (TFC) nanofiltration (NF) membrane for a wide range of feed streams. We proposed a novel design route for TFC NF membranes by grafting well-defined zwitterionic copolymers of [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and 2-aminoethyl methacrylate hydrochloride (AEMA) on the polyamide surfaces via an in situ surface chemical modification process. The successful grafting of a zwitterionic copolymer imparted the modified NF membranes with better surface hydrophilicity, a larger actual surface area (i.e., nodular structures), and a thinner polyamide layer. As a result, the water permeability of the modified membrane (i.e., TFC-10) was triple that of the pristine TFC membrane while maintaining high Na₂SO₄ rejection. We further demonstrated that the TFC-10 membrane possessed exceptional antifouling properties in both static adsorption tests and three cycles of dynamic protein and humic acid fouling tests. To recap, this work provides valuable insights and strategies for the fabrication of TFC NF membranes with simultaneously enhanced filtration performance and antifouling property.