bio-contact oxidation, highlighting the impact of outdated treatment plants

While the effectiveness of Poly-Aluminum Chloride (PAC) coagulation for pollutant removal has been documented across various wastewater scenarios, its specific application in hospital wastewater (HWW) treatment to remove conventional pollutants and hazardous genetic pollutants has not been studied. The research compared three hospital wastewater treatment plants (HWTPs) to address a knowledge gap, including the PAC coagulation-sodium hypochlorite disinfection process (PAC-HWTP), the biological contact oxidation-precipitation-sodium hypochlorite process (BCO-HWTP), and a system using outdated equipment with PAC coagulation (ODE-PAC-HWTP). Effluent compliance with national discharge standards is assessed, with BCO-HWTP meeting standards for direct or indirect discharge into natural aquatic environments. ODE-PAC-HWTP exceeds pretreatment standards for COD and BOD5 concentrations. PAC-HWTP effluent largely adheres to national pretreatment standards, enabling release into municipal sewers for further treatment. Metagenomic analysis reveals that PAC-HWTP exhibits higher removal efficiencies for antibiotic resistance genes, metal resistance genes, mobile genetic elements, and pathogens compared to BCO-HWTP and ODE-PAC-HWTP, achieving average removal rates of 45.13%, 57.54%, 80.61%, and 72.17%, respectively. These results suggests that when discharging treated HWW into municipal sewers for further processing, the use of PAC coagulation process is more feasible and cost-effective compared to BCO technologies. The analysis emphasizes the urgent need to upgrade outdated equipment HWTPs.

Role of phosphate in microalgal-bacterial symbiosis system treating wastewater containing heavy metals

Phosphorus is one of the important factors to successfully establish the microalgal-bacterial symbiosis (MABS) system. The migration and transformation of phosphorus can occur in various ways, and the effects of phosphate on the MABS system facing environmental impacts like heavy metal stress are often ignored. This study investigated the roles of phosphate on the response of the MABS system to zinc ion (Zn2+). The results showed that the pollutant removal effect in the MABS system was significantly reduced, and microbial growth and activity were inhibited with the presence of Zn2+. When phosphate and Zn2+ coexisted, the inhibition effects of pollutants removal and microbial growth rate were mitigated compared to that of only with the presence of Zn2+, with the increasing rates of 28.3% for total nitrogen removal, 48.9% for chemical oxygen demand removal, 78.3% for chlorophyll-a concentration, and 13.3% for volatile suspended solids concentration. When phosphate was subsequently supplemented in the MABS system after adding Zn2+, both pollutants removal efficiency and microbial growth and activity were not recovered. Thus, the inhibition effect of Zn2+ on the MABS system was irreversible. Further analysis showed that Zn2+ preferentially combined with phosphate could form chemical precipitate, which reduced the fixation of MABS system for Zn2+ through extracellular adsorption and intracellular uptake. Under Zn2+ stress, the succession of microbial communities occurred, and Parachlorella was more tolerant to Zn2+. This study revealed the comprehensive response mechanism of the co-effects of phosphate and Zn2+ on the MABS system, and provided some insights for the MABS system treating wastewater containing heavy metals, as well as migration and transformation of heavy metals in aquatic ecosystems.

High-performance plastic-derived metal-free catalysts for organic pollutants degradation via Fenton-like reaction

The preparation of waste plastics-derived catalysts is an effective strategy for the waste reclamation. However, plastic-derived material is unsuitable for wastewater purification due to its small specific surface area (SSA) and inadequate active sites (such as N/O sites). Herein, we synthesized graphene-like nanosheets using g-C3N4 as the self-sacrificing soft template and plastic as the carbon precursor. Consequently, this strategy greatly promoted the efficiencies of the emerging organic pollutants degradation with the SSA and N content of the plastic-derived biochar increasing up to 1043.4 m2/g and 17.53 at.%, respectively. In detail, 100 % sulfadiazine (SD) removal could be achieved in 180 s via the activation of peroxymonosulfate (PMS) and the catalytic activity is far higher than previous research. Mechanism experiments corroborated that such a striking performance was attributed to the generation of SO4•-, O2•- and 1O2. Meanwhile, kinds of plastic precursors, even medical waste (i.e., masks, gauze, operating caps and degreasing cotton) were also applicable. And the practical application of the plastic-derived catalyst was further demonstrated by treating pollutants in a continuous flow mode with in situ fabricated membrane. This work provides valuable insights into waste plastics processing and water pollutants removal.

A sustainable and eco-friendly approach for environmental and energy management using biopolymers chitosan, lignin and cellulose - A review

Biopolymers are a naturally occurring alternative to synthetic polymers that are linked by covalent bonds, which includes cellular components such as proteins, nucleotides, lipids, and polysaccharides. Based on the extensive literature review it was found that chitosan, lignin, and cellulose were predominantly used in the energy and environmental sectors. Due to their vast array of qualities, including the adsorption, flocculation, anticoagulation, and furthermore, have made them useful for treating wastewater and pollutant removal. Chitosan and lignin have been used as a proton exchange membrane in the energy storage device of fuel cells. As these biopolymers develop strong coordination connections with metal surfaces, they act as an anticorrosive agent, which inhibiting the corrosion. Besides, there are a lot of recent developments in the application of biopolymers for energy and environmental fields. The present review provides a concise summary of recent developments in membrane-based biopolymers role in energy and environmental field. In addition, this review is drawn to a conclusion with a discussion of future trends in the real application of biopolymers in a variety of different industries, as well as the financial significance of these future trends.

Enzyme-linked carbon nanotubes as biocatalytic tools to degrade and mitigate environmental pollutants

A wide array of organic compounds have been recognized as pollutants of high concern due to their controlled or uncontrolled presence in environmental matrices. The persistent prevalence of diverse organic pollutants, including pharmaceutical compounds, phenolic compounds, synthetic dyes, and other hazardous substances, necessitates robust measures for their practical and sustainable removal from water bodies. Several bioremediation and biodegradation methods have been invented and deployed, with a wide range of materials well-suited for diverse environments. Enzyme-linked carbon-based materials have been considered efficient biocatalytic platforms for the remediation of complex organic pollutants, mostly showing over 80% removal efficiency of micropollutants. The advantages of enzyme-linked carbon nanotubes (CNTs) in enzyme immobilization and improved catalytic potential may thus be advantageous for environmental research considering the current need for pollutant removal. This review outlines the perspective of current remediation approaches and highlights the advantageous features of enzyme-linked CNTs in the removal of pollutants, emphasizing their reusability and stability aspects. Furthermore, different applications of enzyme-linked CNTs in environmental research with concluding remarks and future outlooks have been highlighted. Enzyme-linked CNTs serve as a robust biocatalytic platform for the sustainability agenda with the aim of keeping the environment clean and safe from a variety of organic pollutants.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Technologies for performance intensification of floating treatment wetland - An explicit and comprehensive review

With the wide application of floating treatment wetland (FTW), the limited performance of FTWs should be improved. A comprehensive review is accordingly necessary to summarize the state-of-the-art on FTWs for performance improvement. An attempt has been made to gain information from literature about technologies to enhance the performance of FTWs. These technologies have been classified into three categories according to their mechanisms: 1) increasing the amount and activity of bacteria; 2) enhancing the growth of plant; and 3) configurable innovations. The design and application of each enhanced FTW have been discussed in detail. Thereafter, all the technologies have been compared and analyzed according to their improvement in pollutant removal and ecological effects. In summary, FTW with additional bio-carriers has a higher potential for future applications with the benefits of wide application conditions, scale-up potential, and the easy combination with other methods to further improve the removal efficiency. The stability and sustainability of these technologies should be further investigated.

Synthesis of cellulose cotton-based UiO-66 MOFs for the removal of rhodamine B and Pb(II) metal ions from contaminated wastewater

The presence of pollutants in drinking water has become a significant concern recently. Various substances, including activated carbon, membranes, biochar, etc., are used to remove these pollutants. In the present study, a new composite comprising cotton fabric and a mixture of Metal-Organic Frameworks (MOFs) was synthesized and used as an adsorbent for eliminating pollutants from wastewater. At first, the UiO-66 MOFs were prepared by a simple method of reacting Zirconium (IV) chloride (ZrCl4) and p-Phthalic acid (PTA) after successful preparation of UiO-66 then modified its surface with amino functional groups by reacting with APTES to obtain UiO-66-NH2. Moreover, the cellulose cotton fabric (CF) surface was modified with Polydopamine (PDA) and obtained CF@PDA. Further, with the help of EDC-HCl and NHS, the UiO-66-NH2 grafted on the surface of the CF@PDA and finally obtained CF@PDA/UiO-66-NH2. In addition, the adsorption study was performed toward RhB dye and Pb(II) metal ion pollutants. The maximum adsorption toward RhB dye was 68.5 mg/g, while toward Pb(II) metal ions was 65 mg/g. In addition, the kinetic study was also conducted and the result favoured the Pseudo-second order kinetic study. The adsorption isotherm was also studied and the Langmuir model was more fitted as compared with the Freundlich model. Moreover, the material has excellent regeneration and recycling ability after ten cycles. The significant adsorption ability, the novel combination of cotton and MOFs, and the recycling feature make our material CF@PDA/UiO-66-NH2 a promising potential absorbent material for wastewater treatment and even in other important areas of water research.

Microalgae-based biochar production and applications: A comprehensive review

Biochar, a solid carbonaceous substance synthesized from the thermochemical degradation of biomass, holds significant potential in addressing global challenges such as soil degradation, environmental pollution, and climate change. Its potential as a carbon sequestration agent, together with its versatile applications in soil amendments, pollutant adsorption, and biofuel production, has garnered attention. On the other hand, microalgae, with their outstanding photosynthetic efficiency, adaptability, and ability to accumulate carbohydrates and lipids, have demonstrated potential as emerging feedstock for biochar production. However, despite the significant potential of microalgal biochar, our current understanding of its various aspects, such as the influence of parameters, chemical modifications, and applications, remains limited. Therefore, this review aims to provide a comprehensive analysis of microalgae-based biochar, covering topics such as production techniques, pollutant removal, catalytic applications, soil amendments, and synthesis of carbon quantum dots to bridge the existing knowledge gap in this field.

Enhancement of carbon nanotubes on microalgal-fungal consortium formation and wastewater treatment

As a promising material with an efficient light capture capability, a low amount of carbon nanotubes can affect growth and photosynthesis by regulating microalgal cells, thereby enhancing the pollutant removal efficiency in wastewater. In this study, microalgal-fungal consortia of Chlorella vulgaris and Ganoderma lucidum were developed with different types and concentrations of carbon nanotubes. The treatment effect of microalgal-fungal consortia on simulated digestate was also studied. The results demonstrate that 1.5 mg/L of carboxylated multi-walled carbon nanotubes remarkably promoted the formation, growth and photosynthesis of consortium. The dry weight and chlorophyll a content reached 19.3 ± 0.53 mg/symbiont and 27.3 ± 0.52 μg/L, respectively. Moreover, the removal efficiency of chemical oxygen demand, total nitrogen, total phosphorus and tetracycline hydrochloride were 94.1%, 65.5%, 61.9% and 96.2%, respectively. Overall, these findings suggest a promising future for the use of carbon nanotubes in wastewater treatment by regulating microalgal-fungal consortia.

Optimizing aeration intensity to enhance self-flocculation in algal-bacterial symbiosis systems

Effectuating optimal wastewater treatment via algae-bacterial symbiosis (ABS) systems necessitates the precise selection of aeration intensity. This study pioneers an in-depth investigation into the interplay of aeration intensity on the microalgal-bacterial consortia's self-flocculation efficacy and the overall treatment performance within ABS systems. The research provides evidence for a direct association between aeration intensity and biomass proliferation, indicating enhanced pollutant removal efficiency with escalated intensities (1.0 and 1.5 L min-1), though the variance lacks statistical significance. The peak self-flocculation efficacy of the microalgal-bacterial consortium (82.39% at 30 min) was manifested at an aeration intensity of 1.0 L min-1. The meticulous analysis of biomass properties showed the complexity of self-flocculation capacity in the consortium, which involves a dynamic interplay of several pivotal factors, including floc size, zeta potential, and EPS content. In situations where these factors pose conflicting influences, the determining factor emerges as the dominant influencer. In this study, the optimal aeration intensity was identified as 1 L min-1, shedding light on the critical threshold for ABS system operation. This study not only enriches the understanding of microalgal-bacterial wastewater treatment mechanisms but also fosters innovative strategies to enhance the performance of such systems.

Hydrogel bioreactor drives Feammox and synergistically removes composite pollutants: Performance optimization, microbial communities and functional genetic differences

Mixed pollutant wastewater has been a difficult problem due to the high toxicity of water bodies and the difficulty of treatment. Rice husk biochar modified with nano-iron tetroxide (RBC-nFe3O4) by polyvinyl alcohol cross-linking internal doping was used to introduce iron-reducing bacteria Klebsiella sp. FC61 to construct a bioreactor. The results of the long-term operation of the bioreactor showed that the removal efficiency of ammonia nitrogen (NH4+-N) and chemical oxygen demand best reached 90.18 and 98.49%, respectively. In addition, in the co-presence of Ni2+, Cd2+, and ciprofloxacin, the bioreactor was still able to remove pollutants efficiently by RBC-nFe3O4 and bio-iron precipitation inside the biocarrier. During the long-term operation, Klebsiella was always the dominant species in the bioreactor. And the sequencing data for functional prediction showed that the biocarrier contained a variety of enzymes and proteins involved in Feammox-related activities to ensure the stable and efficient operation of the bioreactor.

Clarithromycin as soil and environmental pollutant: Adsorption-desorption processes and influence of pH

Antibiotics pollution is a growing environmental issue, as high amounts of these compounds are found in soil, water and sediments. This work studies the adsorption/desorption of the macrolide antibiotic clarithromycin (CLA) for 17 agricultural soils with different edaphic characteristics. The research was carried out using batch-type experiments, with an additional assessment of the specific influence of pH for 6 of the soils. The results show that CLA adsorption reaches between 26 and 95%. In addition, the fit of the experimental data to adsorption models provided values between 1.9 and 19.7 Ln μmol1-n kg-1 for the KF, Freundlich affinity coefficient, and between 2.5 and 10.5 L kg-1 for Kd, distribution constant of Linear model. Regarding the linearity index, n, it varied between 0.56 and 1.34. Desorption showed lower scores than adsorption, with an average of 20%, and with values of 3.1 and 93.0 Ln μmol1-n kg-1 for KF(des) and 4.4 and 95.0 L kg-1 for Kd(des). The edaphic characteristics with the highest influence on adsorption were the silt fraction content and the exchangeable Ca content, while in the case of desorption, they were the total nitrogen, organic carbon, and exchangeable Ca and Mg contents. Regarding the pH, within the range studied (between 3 and 10), its value did not decisively affect the adsorption/desorption process. Overall, the set of these results could be of help to program appropriate measures leading to the retention/elimination of this antibiotic when it reaches the environment as a pollutant.

Illuminating plant-microbe interaction: How photoperiod affects rhizosphere and pollutant removal in constructed wetland?

Rhizosphere is a crucial area in comprehending the interaction between plants and microorganisms in constructed wetlands (CWs). However, influence of photoperiod, a key factor that regulates photosynthesis and rhizosphere microbial activity, remains largely unknown. This study investigated the effect of photoperiod (9, 12, 15 h/day) on pollutant removal and underlying mechanisms. Results showed that 15-hour photoperiod treatment exhibited the highest removal efficiencies for COD (87.26%), TN (63.32%), and NO3--N (97.79%). This treatment enhanced photosynthetic pigmentation and root activity, which increased transport of oxygen and soluble organic carbon to rhizosphere, thus promoting microbial nitrification and denitrification. Microbial community analysis revealed a more stable co-occurrence network due to increased complexity and aggregation in the 15-hour photoperiod treatment. Phaselicystis was identified as a key connector, which was responsible for transferring necessary carbon sources, ATP, and electron donors that supported and optimized nitrogen metabolism in the CWs. Structural equation model analysis emphasized the importance of plant-microbe interactions in pollutant removal through increased substance, information, and energy exchange. These findings offer valuable insights for CWs design and operation in various latitudes and rural areas for small-scale decentralized systems.

Research progress of electrically-enhanced membrane bioreactor (EMBR) in pollutants removal and membrane fouling alleviation

Membrane bioreactor (MBR), as a biological unit for wastewater treatment, has been proven to have the advantages of simple structure and high pollutant removal rate. However, membrane fouling limits its wide application, and it is crucial to adopt effective membrane fouling control methods. As a new type of membrane fouling control technology, electrically-enhanced MBR (EMBR) has attracted more interest recently. It uses the driving force of electric field to make pollutants flocculate or move away from the membrane surface to achieve the purpose of inhibiting membrane fouling. This paper expounds the configuration of EMBR in recent years, including the location of membrane components, the way of electric field application and the selection of electrode and membrane materials, and provides the latest development information in various aspects. The enhanced effect of electric field on the removal of comprehensive and refractory pollutants is outlined in detail. And from the perspective of sludge properties (EPS, SMP, sludge particle size, zeta potential and microbial activity), the influence of electric field on sludge characteristics and the relationship between the changes of sludge properties in EMBR and membrane fouling are discussed. Moreover, the electrochemical mechanisms of electric field alleviating membrane fouling are elucidated from electrophoresis, electrostatic repulsion, electroflocculation, electroosmosis, and electrochemical oxidation, and the regeneration and stability of EMBR are assessed. The existing challenges and future research directions are also proposed. This review could provide theoretical guidance and further studies for subsequent topic, and promoting the wide engineering applications of EMBR.

Activated carbon modified titanium dioxide/bismuth trioxide adsorbent: One-pot synthesis, high removal efficiency of organic pollutants, and good recyclability

Considerable endeavors have focused on tightly combining adsorption with photocatalysis in designing composite materials for environmental pollution treatment. Recent advances in coupling titanium dioxide/bismuth trioxide (TiO₂/Bi₂O₃) with activated carbon (AC) show significantly enhanced photocatalytic performance but face critical limitations including low adsorption capacity and multi-step synthesis. In this work, we introduce a one-pot synthesis of activated carbon modified TiO₂/Bi₂O₃ composite materials (TiO₂/Bi₂O₃/AC). Thanks to the integrated adsorbent/photocatalyst system, TiO₂/Bi₂O₃/AC shows a drastically enhanced removal efficiency for sulfamethazine (>81%), far beyond the corresponding value of the reported AC/TiO₂/Bi₂O₃ adsorbent (<40%). Notably, the removal rates of other typical pollutants including tetracyclines, methyl orange, and rhodamine B are as high as >98%. Furthermore, TiO₂/Bi₂O₃/AC obtains >80% of its adsorption rate for the fifth cycle after simple photo-regeneration without any other post-treatments. Kinetic analysis and photoelectric characterization are carried out to provide insight into adsorption mechanism. Therefore, this work demonstrates a considerable potential to design and construct other multifunctional adsorbents with advanced performance.

Influence of aeration, plants, electrodes, and pollutant loads on treatment performance of constructed wetlands: A comprehensive study with septage

This study reports the performance of non-aerated and aerated unplanted, planted, microbial fuel cell planted wetlands for stabilizing septage and treating the drained wastewater. The wetland systems of this study were dosed with septage for a relatively shorter period, i.e., 20 weeks, followed by 60 days of sludge drying period. The sludge loading rates across the constructed wetlands ranged between 259 and 624 kg total solids (TS)/m² per year. Organic matter, nitrogen, and phosphorus concentration of the residual sludge ranged between 8512 and 66,374 mg/kg, 12,950 and 14,050 mg/kg, 4979 and 9129 mg/kg, respectively. The presence of plants, electrode, and aeration improved sludge dewatering and decreased the organic matter and nutrient concentration of the residual sludge. The heavy metals (Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn) concentration of the residual sludge fulfilled the guidelines for agricultural reuse in Bangladesh. Chemical oxygen demand (COD), ammoniacal nitrogen (NH₄-N), total nitrogen (TN), total phosphorus (TP), and coliform removal percentages from the drained wastewater ranged between 91 and 93 %, 88 and 98 %, 90 and 99 %, 92 and 100 %, and 75 and 90 %, respectively. NH₄-N removal from the drained wastewater depended upon aeration. The sludge treatment wetlands achieved metals removal percentages (from the drained wastewater) ranging between 90 and 99 %. Physicochemical and microbial routes in accumulated sludge, rhizosphere, and media contributed to pollutants removal. Input load and organic removal increment (from the drained wastewater) were positively correlated; nutrient removal showed a contradictory trend. The non-aerated and aerated microbial fuel cell planted wetlands produced maximum power densities ranging between 66 and 3417 mW/m³. Because of the shorter experimental duration, this study revealed preliminary but new information on the macro and micro pollutants removal pathways in septage sludge wetlands (with and without electrode) that could be utilized to design pilot or full-scale systems.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

Swine wastewater treatment using combined up-flow anaerobic sludge blanket and anaerobic membrane bioreactor: Performance and microbial community diversity

To address the existing economic and environmental issues associated with swine wastewater (SW) treatment, a process combining up-flow anaerobic sludge blanket (UASB) and anaerobic membrane bioreactor (AnMBR) was developed and continuously operated for 137 d. Bioreactor conversion and microbial community dynamics in reactors were analyzed. The UASB-AnMBR process yielded excellent pollutants removal efficiencies of 96% and 63% for chemical oxygen demand (COD) and total phosphorous (TP), respectively. More than 60% of Firmicutes (Terrisporobacter, Turicibacter, and Clostridium sensu stricto 1), which were dominated by Methanosaeta and Methanobacterium with relative abundances of 58.6% and 36.8% in the UASB and 22.5% and 40.3% in the AnMBR, respectively, converted complex compounds into organic acids for methanogenesis. This research presented an analysis of pollutants removal and microbial dynamics of UASB-AnMBR, which significantly affected the large-scale application of UASB-AnMBR process.

A novel constructed wetland based on iron carbon substrates: performance optimization and mechanisms of simultaneous removal of nitrogen and phosphorus

In recent years, the combination of iron carbon micro-electrolysis (ICME) with constructed wetlands (CWs) for removal of nitrogen and phosphorus has attracted more and more attention. However, the removal mechanisms by CWs with iron carbon (Fe-C) substrates are still unclear. In this study, the Fe-C based CW (CW-A) was established to improve the removal efficiencies of nitrogen and phosphorus by optimizing the operating conditions. And the removal mechanisms of nitrogen and phosphorus were explored. The results shown that the removal rates of COD, NH₄⁺-N, NO₃^--N, TN, and TP in CW-A could reach up to 84.4%, 94.0%, 81.1%, 86.6%, and 84.3%, respectively. Wetland plants and intermittent aeration have dominant effects on the removal of NH₄⁺-N, while the removal efficiencies of NO₃^--N, TN, and TP were mainly affected by Fe-C substrates, wetland plants, and HRT. XPS analysis revealed that Fe(0)/Fe²⁺ and their valence transformation played important roles on the pollutants removal. High-throughput sequencing results showed that Fe-C substrates and wetland plants had considerable impacts on the microbial community structures, such as richness and diversity of microorganism. The relative abundance of autotrophic denitrification bacteria (e.g., Denitatsoma, Thauera, and Sulfuritalea) increased in CW-A than CW-C. The electrons and H₂/[H] produced from Fe-C substrates were utilized by autotrophic denitrification bacteria for NO₃^--N reduction. Microbial degradation was the main removal mechanism of nitrogen in CW-A. Removal efficiency of phosphorus was enhanced resulted from the reaction of phosphate with iron ion. The application of CWs with Fe-C substrates and plants presented great potential for simultaneous removal of nitrogen and phosphorus.

Re-circulation of Fe/persulfate regulated sludge fermentation products for sewage treatment: Focus on pollutant removal efficiency, microbial community and metabolic activity

Persulfate (PS)-based technologies have been demonstrated as efficient methods for enhancing the performance of waste activated sludge (WAS) anaerobic fermentation. Except for volatile fatty acids (VFAs), however, some exogenous substances would be also released during this process, which might affect its application as a carbon source for sewage treatment. To fill this knowledge gap, the feasibility of sludge fermentation liquid regulated by Fe/persulfate (PS) (PS-FL) as a carbon source for sewage treatment was investigated in this study. Results indicated that PS-FL exhibits distinct effects on the pollutants removal compared with commercial sodium acetate. It facilitates PO₄^3--P removal but slightly inhibited COD removal & denitrification, and sludge settleability was also decreased. The mechanistic analysis demonstrated that PS-FL could stimulate the enrichment of phosphorus-accumulating bacteria (i.e. Candidatus Accumulibacter) and the enhancement of their metabolic activities (i.e. PKK), thereby enhancing the biological PO₄^3--P removal. Moreover, Fe ions in PS-FL could combine with PO₄^3--P to form a precipitate and thus further contributed to PO₄^3--P removal. Conversely, the sulfate reduction process induced by SO₄^2- in PS-FL inhibits denitrification by reducing the abundance of denitrifying bacteria (i.e. Dechloromonas) and metabolic activities (i.e. narG). Additionally, PS-FL also decreased the abundance of flocculation bacteria (i.e. Flavobacterium) and down-regulated the expression of functional genes responsible for COD removal, by which it exhibited certain negative effects on COD removal and sludge settleability. Overall, this work demonstrated that PS-FL can re-circulation as a carbon source for sewage treatment, which provides a new approach to recovering valuable carbon sources from WAS.

Vertical-scale spatial influence of radial oxygen loss on rhizosphere microbial community in constructed wetland

Complex interactions between plants and microorganisms form the basis of constructed wetlands (CWs) for pollutant removal. In the rhizosphere, radial oxygen loss (ROL) plays a key role in the activity and abundance of functional microorganisms. However, little has been done to explore how ROL would influence the niche differentiation of microbial communities at different vertical spatial scales. We demonstrate that ROL decreases with depth, promoting an oxidation-reduction rhizosphere microecosystem in CWs. The high level of ROL in the upper layer could support the oxygen supply for aerobic bacteria (Haliangium), facilitating the COD (60%) and NH₄⁺-N (50%) removal, whereas the enrichment of denitrifiers (e.g., Hydrogenophaga and Ralstonia) and methanotrophs (Methanobaterium) in the lower layer could stimulate denitrification. The function prediction results further certified that the abundance of genes catalyzing nitrifying and denitrification processes were significantly enhanced in the upper and bottom layers, respectively, which was attributed to the oxygen concentration gradient in the rhizosphere. This study contributes to further unraveling the rhizosphere effect and enables an improved understanding of the decontamination mechanisms of CWs.

Design of biomass-based composite photocatalysts for wastewater treatment: a review over the past decade and future prospects

This investigation applied a systematic review approach on publications covering primary data during 2012-2022 with a focus on photocatalytic degradation of pollutants in aqueous solution by composite materials synthesized with biomass and, at least, TiO₂ and/or ZnO semiconductors to form biomass-based composite photocatalysts (BCPs). After applying a set of eligibility criteria, 107 studies including 832 observations/entries were analyzed. The average removal efficiency and degradation kinetic rate reported for all model pollutants and BCPs were 77.5 ± 21.5% and 0.064 ± 0.174 min^-1, respectively. Principal component analysis (PCA) was applied to analyze BCPs synthesis methods, experimental conditions, and BCPs' characteristics correlated with the removal efficiency and photodegradation kinetics. The relevance of adsorption processes on the pollutants' removal efficiency was highlighted by PCA applied to all categories of pollutants (PCA_pol). The PCA applied to textile dyes (PCA_dyes) and pharmaceutical compounds (PCA_pharma) also indicate the influence of variables related to the composite synthesis (i.e., thermal treatment and time spent on BCPs synthesis) and photocatalytic experimental parameters (catalyst concentration, pollutant concentration, and irradiation time) on the degradation kinetic accomplished by BCPs. Furthermore, the multivariate analysis (PCA_pol) revealed that the specific surface area and the narrow band gap are key characteristics for BCPs to serve as a competitive photocatalyst. The effect of scavengers on pollutants' degradation and the recyclability of BCPs are also discussed, as necessary aspects for scalability trends. Further investigations are recommended to compare the performance of BCPs and commercial catalysts, as well as to assess the costs to treat real wastewater.

Sorption and continuous filtration of heavy metals and radionuclides using novel nano-Farringtonite: Mechanisms delineation using EXAFS

Simultaneous removal of a wide range of toxic heavy metal cations and potential radionuclides from water bodies and their continuous filtration with a single low-cost and eco-friendly material represents several scientific merits. Herein, for the first time, we report the simple and straightforward wet-chemical synthesis of novel nano-Farringtonite (FAR) composed of magnesium and phosphate ions. Further, the potential of known alternate nano-hydroxyapatite (HAP) and novel engineered nano-FAR including their non-stoichiometric variations was evaluated for the removal of mimicking radionuclide (Sr²⁺) and heavy metals (Cd²⁺, and Zn²⁺) from water bodies. Non-stoichiometric FAR (ns-FAR) have shown multifold higher contaminant removal capacities than HAP, i.e., Sr²⁺≈ 85 mg/g vs 49.5 mg/g, Cd²⁺≈ 560 mg/g vs 98.5 mg/g, and Zn²⁺ = 489 mg/g vs 62 mg/g in batch mode. NsFAR showed complete removal of Cd²⁺ and Zn²⁺ with <20% and 0% recovery, respectively in three consecutive sorption-recovery cycles, probing towards permanent incorporation of these ions. Spectroscopic analysis and extended x-ray absorption fine structure (EXAFS) spectroscopy fitting confirmed ion exchange and crystal incorporation as probable removal mechanisms. The high ionic potential of Mg²⁺ allows easy ion exchange with +2 charged metal toxins of varying ionic radius at both Mg1 and Mg2 sites of FAR. nsFAR showed instantaneous separation of these cations in continuous column mode with >2,00,000 L/kg of water filtration capacity (at 1 mg/L), justifying the adsorbent's candidature in water purification applications.

Anaerobic digestates grown oleaginous microalgae for pollutants removal and lipids production

Anaerobic digestates were potential mediums for cultivating oleaginous microalgae, but their various components brought uncertainties for aglal growth and lipids production. In this study, three microalgae strains were tested to grow on four typical anaerobic digestates. The results showed that anaerobic food wastewater was an optimal medium for C. pyrenoidosa and S. obliquus culture (N. oleoabundanst cannot survive), achieving the highest biomass (2.15-2.32 g L^-1) and lipids production (20.6-32.5 mg L^-1·d^-1). In contrast, three microalgae strains could grow suboptimally in anaerobic municipal (0.79-0.95 g L^-1) and toilet (0.92-1.40 g L^-1) wastewater, but showed poor performances in anaerobic swine wastewater. The growth of microalgae removed 40.9-63.4% of TOC, 83.7-96.3% of NH₄⁺-N and 70.3-89.4% of TP in the three ADs. In addition, it was unfortunately found that the lipids content and saturation degree in fatty acids significantly decreased in ADs with sufficient nutrients. It suggests that some measures should be taken to balance biomass, lipids production and quality for cultivating microalgae in anaerobic digestates.

Electrochemical oxidation of palm oil mill effluent using platinum as anode: Optimization using response surface methodology

This work investigates the electrochemical oxidation of palm oil mill effluent (POME) treatment using platinum (Pt) as anode and graphite as a cathode. The response surface methodology was used to investigate the relationships between different factors conditions (voltage, electrolysis time and chemical support) and responses of the treatment (chemical oxygen demand reduction, colour removal, and total oil removal). A quadratic mathematical model was chosen for all responses using Box-Behnken Design (BBD) with R² 0.9853 for COD reduction, R² 0.9478 for colour removal and R² 0.9185 for total oil removal. According to Derringer's function desirability, under the optimum condition (Voltage 15, electrolysis time 2 h, and 19.95 mg/L NaCl) of POME treatment, 84% of COD reduction, 98% of colour removal and 99% total oil of removal could be achieved. These results indicate that platinum as an anode material is effective for the electrochemical oxidation treatment of POME.

Nutrient and organic pollutants removal in synthetic wastewater by Pseudomonas aeruginosa and Chryseobacterium sp./biofilter systems

Nutrient and organic pollution raise serious problems for aquatic ecosystems through the accumulation of organic carbon, the reduction of light penetration, and the loss of submerged aquatic vegetation. The over-enrichment of water with nitrogen and phosphorus leads to an imbalance in nutrient ratios, creating favorable conditions for toxic algal blooms, formation of oxygen-depleted water, etc. Thus, developing new technological solutions to reduce their amount is imperative. The present study investigates the capacity of Pseudomonas aeruginosa and Chryseobacterium sp. bacterial strains to form biofilm on solid support (biofilter), both individually and in tandem, using various analytical techniques. Also, the biofilm/biofilter systems' efficiency in removing nutrients such as nitrate, nitrite, ammonium, and phosphate ions from municipal wastewaters is assessed. The results showed a reduction of nutrient pollution of up to 91%, 98%, 55%, and 71% for nitrite, nitrate, ammonium, and phosphate ions. A reduction of about 78% of COD was also observed. The results were obtained in the absence of an additional aeration process, thus having a great potential for reducing total costs of wastewater treatment and developing ecological systems for wastewater management.

Mechanism of Fe-C micro-electrolysis substrate to improve the performance of CW-MFC with different factors: Insights of microbes and metabolic function

Constructed wetland-microbial fuel cell (CW-MFC) is a novel technology for wastewater treatment with electrical generation. This work proposed a Fe-C micro-electrolysis substrate (Fe-C) with biomass modified ceramsite to enhance pollutants removal and electricity generation. The key influencing factors were revealed, and the COD, NH₄⁺-N, and TP removal efficiency was respectively increased by 10.2, 8.1 and 8.78% with 76% higher power output at optimal conditions (e.g. OLR 52.5 g/(m².d), HRT 48 h, and aeration rate 800 mL/min). Fe-C based substrates improved the microenvironments in CW-MFC, including dissolved oxygen (DO) and oxidation-reduction potential (ORP) lowering and electron transfer facilitation. These contributed to the enrichment of critical microorganisms and metabolic activities. The abundance of functional bacteria (i.e. Geobacter, Thauera and Dechloromonas) were evidently increased. Additionally, the energy metabolism and other functional genes encoding cytochrome c (ccoN), nitrite reductase (nirD) and phosphate transporter (pstA) were all stimulated.

Performance optimization and microbial community evaluation for domestic wastewater treatment in a constructed wetland-microbial fuel cell

Constructed wetland-microbial fuel cell system (CW-MFC), an attractive technology still under study, has shown to improve domestic wastewater treatment efficiency and generate bioelectricity. This work investigated the effect of multiple factors on the performance optimization for the pollutants removal and bioelectricity production compared to a traditional CW, including influent chemical oxygen demand (COD) concentration, hydraulic retention time (HRT) and external resistance. The results showed that the optimal operating conditions of COD concentration, HRT and external resistance for CW-MFC were 200 mg/L, 24 h and 1000 Ω, respectively. The average COD, NH₄⁺-N, NO₃^--N and TP removal efficiencies were 6.06%, 3.85%, 3.68% and 3.68% higher than these in CW system, respectively. Meanwhile, the maximum output voltage and power density of CW-MFC were 388 ± 12 mV and 107.54 mW/m³. In addition, the microbial community analysis indicated that the pollution removal and bioelectricity generation might benefit from the gradual enrichment of electroactive bacteria (Tolumonas) and denitrifying bacteria (Denitratisoma, Methylotenera and Sulfuritales). The findings can provide the optimum operation parameters and mechanism insight for the performance of CW-MFC systems.

A comprehensive review on current technologies for removal of endocrine disrupting chemicals from wastewaters

In the recent years, endocrine disrupting compounds (EDCs) has received increasing attention due to their significant toxic effects on human beings and wildlife by affecting their endocrine systems. As an important group of emerging pollutant, EDCs have been detected in various aquatic environments, including surface waters, groundwater, wastewater, runoff, and landfill leachates. Their removal from water resources has also been an emerging concern considering growing population as well as reducing access to fresh water resources. EDC removal from wastewaters is highly dependent on physicochemical properties of the given EDCs present in each wastewater types as well as various aquatic environments. Due to chemical, physical and physicochemical diversities in these parameters, variety of technologies consisting of physical, biological, electrochemical, and chemical processes have been developed for their removal. This review highlights that the effectiveness of EDC removal is highly dependent of selecting the appropriate technology; which decision is made upon a full wastewater chemical characterization. This review aims to provide a comprehensive perspective about all the current technologies used for EDCs removal from various aquatic matrices along with rising challenges such as the antimicrobial resistance gene transfer during EDC treatment.

Advances and prospects on the aquatic plant coupled with sediment microbial fuel cell system

Energy resource scarcity and sediment pollution perniciousness have become enormous challenges, to which research has been focused on energy recovery and recycle technologies to solve both above problems. The organic matter stored in anoxic sediments of freshwater ecosystem represents a tremendous potential energy source. The system of aquatic plant coupled with sediment microbial fuel cell (AP-SMFC) has attracted much attention as a more feasible, economical and eco-friendly way to remediate sediment and surface water and generate electricity. However, the research on AP-SMFC has only been carried out in the last decade, and relevant studies have not been well summarized. In this review, the advances and prospects on AP-SMFC were systematically introduced. Firstly, the annual publication counts and keywords co-occurrence cluster of AP-SMFC were identified and visualized by resorting to the CiteSpace software, and the result showed that the research on AP-SMFC increased significantly in the last decade on the whole and will continue to increase. The bibliometric results provided valuable references and information on potential research directions for future studies. And then, the research progress and reaction mechanism of AP-SMFC were systematically described. Thirdly, the performance of AP-SMFC, including nutrients removal, organic contaminants removal, and electricity generation, was systematically summarized. AP-SMFC can enhance the removal of pollutants and electricity generation compared with SMFC without AP, and is considered to be an ideal technology for pollutants removal and resource recovery. Finally, the current challenges and future perspectives were summarized and prospected. Therefore, the review could serve as a guide for the new entrants to the field and further development of AP-SMFC application.

Current status of hypochlorite technology on the wastewater treatment and sludge disposal: Performance, principals and prospects

As cost-effective and high-efficient oxidants, the hypochlorite chemicals have been widely utilized for bleaching and disinfection. However, its potential applications in wastewater treatment and sludge disposal were less concerned. This paper mainly summarized the state-of-the-art applications of hypochlorite technology in wastewater and sludge treatment based on the main influencing factors and potential mechanisms of hypochlorite treatment. The results indicated that the hypochlorite approaches were not only effective in pollutants removal and membrane fouling mitigation for wastewater treatment, but also contributed to sludge dewatering and resource recovery for sludge disposal. The ClO^- and large generated free active radicals (i.e., reactive chlorine species and reactive oxygen species), which possessed strong oxidative ability, were the primary contributors to the pollutants decomposition, and colloids/microbes flocs disintegration during the hypochlorite treatment process. The performance of hypochlorite treatment was highly associated with various factors (i.e., pH, temperature, hypochlorite types and dosage). In combination with the reasonable activators (i.e., Fe²⁺ and ultraviolet), auxiliary agents, and innovative processes (i.e., hydrothermal and electro-oxidation), the operational performance of hypochlorite technology could be further enhanced. Finally, the feasibility and benefits of hypochlorite application for wastewater and sludge treatment were analyzed, and the existing challenges and future research efforts that need to be made have also prospected. The review can hopefully provide a theoretical basis and technical guidance to extend the application of hypochlorite technology for wastewater treatment and sludge disposal on large scale.

New research on reduction and/or elimination of hazardous substances in the design, manufacture and application of chemical products

The Virtual Special Issue (VSI) "New research on reduction and/or elimination of hazardous substances in the design, manufacture and application of chemical products" was initially associated to the "International Conference on Green Chemistry and Sustainable Engineering, GreenChem-20" that was postponed due to the COVID-19 pandemic. Anyway, the international conference will take place in the near future. However, the VSI was maintained in this journal, received a high number of submissions, and selected manuscripts have been accepted after peer-reviewing. The published papers constitute a set of high-quality contributions, which, in the future, could be complemented with others related to additional conferences about similar topics. In this editorial piece, the Editors include brief comments on papers accepted for publication in the Special Issue, as well as additional aspects of interest related to the subject.

Mitigation of environmentally hazardous pollutants by magnetically responsive composite materials

At present, environmental contamination has become an emerging issue among researchers. These facts are due to the adverse impacts of an alarming number of recalcitrant contaminants that can affect both humans and animals. There is an urgent need to develop eco-friendly approaches to mitigate the effects of toxic pollutants from the environment. Magnetically responsive composite-based sorbents are very interesting and popular materials for pollutant abatement owing to the high specific surface area, superior adsorption capacity, and magnetic properties, which make their easy separation from sample solution/media. In this review article, we discuss various synthesis approaches, key physicochemical properties, and applications of magnetic composites for pollutant removal. Current gaps for coping with contamination are identified, and a comprehensive outlook in pollutant treatment using magnetic composites is outlined. This study unveils new horizons to researches for better understanding the properties of magnetically-composite-based sorbents and their application in environmental remediation.

A continuous flow-through system with integration of electrosorption and peroxi-coagulation for efficient removal of organics

A flow-through reactor with integration of electrosorption (ES) and peroxi-coagulation (PC) processes was designed for organics removal. Impacts of key parameters (solution pH, flow rate, initial concentration of organics, applied voltage) on the removal efficiency of Orange II were explored. Under the optimized conditions, 93% removal efficiency and 1043 mg g^-1 removal capacity of Orange II could be obtained with an energy consumption of 31.9 kWh m^-3 order^-1. Controlled experiments of ES for pollutants removal, and the detections of dissolved irons and the generated hydroxyl radicals (^•OH) were conducted, demonstrating the coupling effect and contribution ratio of ES and PC for organics removal in this flow-through system. The spatiotemporal efficiency of the integrated flow-through system was more than 10 times of conventional ES system, providing more potential for practical application of wastewater treatment. The flow-through system was also verified to be advantageous for removal of other organic pollutants including 2,4-dichlorophenoxyacetic acid, phenol and methylene blue with high removal efficiencies. This study proved that the integrated flow-through process was an efficient, comparative and applicable method for wastewater treatment.

Nutrients recycling and biomass production from Chlorella pyrenoidosa culture using anaerobic food processing wastewater in a pilot-scale tubular photobioreactor

Microalgae cultivation in anaerobic food wastewater was a feasible way for high biomass production and nutrients recycling. In this study, Chlorella pyrenoidosa culture on anaerobic food wastewater was processed outdoors using a pilot-scale tubular photobioreactor. The microalgae showed rapid growth in different seasons, achieving high biomass production of 1.83-2.10 g L^-1 and specific growth rate of 0.73-1.59 d^-1. The biological contamination and dissolved oxygen were controlled at suitable levels for algal growth in the tubular photobioreactor. Lipids content in harvested biomass was 8.1-15.3% of dried weight, and the analysis in fatty acids revealed high quality with long carbon chain length and high saturation. Additionally, algal growth achieved effective pollutants purification from wastewater, removing 42.3-53.8% of COD_Cr, 82.6-88.7% of TN and 59.7-67.6% of TP. This study gave a successful application for scaled-up microalgae culture in anaerobic food processing wastewater for biodiesel production and wastewater purification.

Innovative technology of municipal wastewater treatment for rapid sludge sedimentation and enhancing pollutants removal with nano-material

This study aims to develop a novel technology for actual municipal wastewater treatment to achieve rapid sludge sedimentation and high pollutants removal efficiency. The SBRs were modified and operated with periodic addition of 20 μL·L^-1 nanofloc®. Results revealed that NH₄⁺-N and chemical oxygen demand (COD) was efficiently removed in both laboratory- and pilot-scale SBRs, and the average removal efficiency of total nitrogen (TN) and total phosphorus (TP) was as high as 72.43 ± 2.66% and 98.63 ± 0.74%, respectively, with hydraulic retention time (HRT) of 8 h. Besides, the sludge volume index at 30 min (SVI₃₀) was only 40.06 ± 1.99 mL·g^-1, comparable with aerobic granular sludge (AGS). This novel technology could be proposed as a competitive method to upgrade, reconstruct and delay the expansion of municipal wastewater treatment plants (WWTPs) due to its rapid sludge sedimentation and efficient pollutants removal with low HRT.

Organic matter removal and nitrogen transformation by a constructed wetland-microbial fuel cell system with simultaneous bioelectricity generation

Microbial fuel cells integrated into constructed wetlands have been previously studied. Nevertheless, their application as a suitable treatment for wastewater is still in the developmental stage. In this context, the aim of this study was to evaluate organic matter removal and nitrogen transformation by a microbial fuel cell integrated into a constructed wetland (CWMFC). To accomplish this, three experimental systems were operated under batch-mode conditions over 170 days: i) one was planted with Schoenoplectus californicus (P-CWMFC); ii) another was unplanted (NP-CWMFC); and iii) the third system did not have any electrodes (CW) and was used as a control. Chemical oxygen demand (COD) removal efficiency ranged between 74-87%, 69-81% and 62-72% for the P-CWMFC, NP-CWMFC and CW systems, respectively, with organic loading rates (OLR) ranging from 4.8 to 7.9 g COD/m² d. NH₄⁺-N removal efficiency exceeded 98%, 90% and 83% for P-CWMFC, NP-CWMFC and CW, respectively. Wastewater treatment performance was improved due to anaerobic oxidation that occurred on the anodes. Organic matter removal was 18% higher in closed-circuit mode than in open-circuit mode in both integrated systems (P-CWMFC and NP-CWMFC), and these differences were significant (p < 0.05). With respect to the performance of microbial fuel cells, the maximum power density (8.6 mW/m²) was achieved at an organic loading rate of 7.9 g COD/m² d with an internal resistance and coulombic efficiency of 251 Ω and 2.4%, respectively. The results obtained in this work can provide positive impacts on CW development by enhancing anaerobic degradation without forced aeration.

Co-immobilization of laccase and ABTS onto amino-functionalized ionic liquid-modified magnetic chitosan nanoparticles for pollutants removal

This work aims to achieve the co-immobilization of laccase and 2,2-binamine-di-3-ethylbenzothiazolin-6-sulfonic acid (ABTS) to improve removal capability of the biocatalyst for pollutants while avoiding potential pollution caused by ABTS. The laccase was immobilized on magnetic chitosan nanoparticles modified with amino-functionalized ionic liquid containing ABTS (MACS-NIL) based on Cu ion chelation (MACS-NIL-Cu-lac). The carrier was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, x-ray diffraction and etc., and electron paramagnetic resonance confirmed the mediator molecule ABTS on the carrier could also play the role of electron transmission. MACS-NIL-Cu-lac presented relatively high immobilization capacity, enhanced activity (1.7-fold that of free laccase), improved pH and temperature adaptability, and increased thermal and storage stability. The removal performance assay found that MACS-NIL-Cu-lac had a good removal efficiency with 100.0 % for 2,4-dichlorophenol in water at 25 °C, even when the concentration reached 50 mg/L. Reusability study showed that after six catalytic runs, the removal efficiency of 2,4-dichlorophenol by MACS-NIL-Cu-lac could still reach 93.2 %. Additionally, MACS-NIL-Cu-lac exhibited higher catalytic efficiencies with 100.0 %, 70.5 % and 93.3 % for bisphenol A, indole, and anthracene, respectively. The high catalytic performance in pure water system obtained by the novel biocatalyst co-immobilizing laccase and electron mediator ABTS showed greater practical application value.

Iron coupling with carbon fiber to stimulate biofilms formation in aerobic biological film systems for improved decentralized wastewater treatment: Performance, mechanisms and implications

Iron coupling with carbon fiber (ICF) as carriers to stimulate the biofilms formation for decentralized wastewater treatment was proposed. The typical pollutants removal was accelerated and enhanced (increased by 13.65% for chemical oxygen demand, 19.68% for ammonia nitrogen and 32.66% for phosphate) in ICF compared with the traditional carbon fiber (CF) system. Mechanism explorations indicated that the iron coupling improved the surface properties of carbon fibers and contributed to the attachment and growth of biomass significantly. The components of biomass were changed with increasing proteins proportion in ICF, which was beneficial to the biofilms formation and stability. The microbial community was altered with the enrichment of functional microorganisms (i.e. Pseudomonas and Thauera). Moreover, the microbial metabolic functions (i.e. enzymatic activities and encoding genes) involved in pollutants removal derived from decentralized wastewater were highly expressed in ICF. This work provided an effective strategy to enhance the decentralized wastewater treatment.

A critical review on the biochar production techniques, characterization, stability and applications for circular bioeconomy

•

Recent research on remediation of toxic pollutants by biochar has been summarized.

•

The production techniques of the biochar have been narrated.

•

Biochar properties, stability and its environmental issues have been analysed.

•

Applications of biochar in soil fertility and removing pollutants have been reported.

•

The major stumbling block in biochar production is cost of production.

There is an upsurge enthusiasm for utilizing biochar produced from waste-biomass in different fields, to address the most important ecological issues. This review is focused on an overview of remediating harmful contaminants utilizing biochar. Production of biochar utilizing various systems has been discussed. Biochar has received the consideration of numerous analysts in building up their proficiency to remediate contaminants. Process parameters are fundamentally answerable for deciding the yield of biomass. Biochar derived from biomass is an exceptionally rich wellspring of carbon produced from biomass utilizing thermal combustion. Activating biochar is another particular region for the growing utilization of biochar for expelling specific contaminations. Closed-loop systems to produce biochar creates more opportunities. Decentralized biochar production techniques serve as an effective way of providing employment opportunities, managing wastes, increasing resource proficiency in circular bioeconomy. This paper also covers knowledge gaps and perspectives in the field of remediation of toxic pollutants using biochar.

Effects of plants competition on critical bacteria selection and pollutants dynamics in a long-term polyculture constructed wetland

The effects of mix planting on the functions of plants, microorganisms, and their interactions were studied in a CW planted with Phragmites australis and Typha orientalis over six years. Findings show notable competition among plant species, with excessive overgrowth of the dominant species (P. australis) over T. orientalis. The excessive outcompeting by P. australis resulted in significantly higher plant density and biomass of 20.1 times and 11.2 times, respectively than that of T. orientalis. Interspecific competition appeared to considerably intensify plants contributions to nitrogen and phosphorus removal, which increased from circa 9% in the first year up to 42% in the sixth year. High-throughput pyrosequencing and network analyses demonstrated that the dominant species stands harbor diverse bacterial communities that could enhance the wetland performance through carbon degradation, nutrient cycling, and supporting plant growth. These results provide useful insights into the interactive effects of plants and bacteria in polyculture constructed wetlands.

Deterioration of biological pollutants removal induced by linear alkylbenzene sulphonates in sequencing batch reactors: Insight of sludge characteristics, microbial community and metabolic activity

Linear alkylbenzene sulfonates (LAS) are widely detected in wastewater, and pose potential risks to environment. The influences of LAS on the typical pollutants removal in sequencing batch reactors (SBRs) were evaluated. The results indicated that the removal efficiency of COD, NH₄⁺ and PO₄^3- was respectively reduced by 10.5-27.5%, 5.4-7.3% and11.6-28.9% with the exposure of 10-50 mg/L LAS. Mechanisms investigation found that LAS disrupted the sludge structure and reduced the biomass in reactors due to the saponification effects. Also, the presence of LAS altered the microbial community of activated sludge, and reduced the abundances of functional bacterial responsible for pollutants removal (i.e.Candidatus Accumulibacter, Nitrospira, Denitratisoma and etc.). Moreover, the LAS exhibited negative impacts on the microbial activity with increased LDH release but decreased ATP concentration. The genes expressions for microbial metabolism (i.e. carbohydrate metabolisms, energy metabolism) and typical pollutants removal (i.e. electron transport, phosphonate transport) were all downregulated in LAS-exposed SBRs.

Implications of layered double hydroxides assembled biochar composite in adsorptive removal of contaminants: Current status and future perspectives

In recent years, biochar composites have received considerable attention for environmental applications. This paper reviews the current state of research on Layered Double Hydroxides (LDHs) tailored biochar composites in terms of their synthesis methods, characteristics, and their use as adsorbents for the removal of various pollutants from water, highlighting and discussing the key advancement in this area. The adsorption potential of LDHs-biochar composites for different inorganic and organic contaminants, important factors affecting composites' properties and the adsorption process, and the mechanisms involved in adsorption are discussed in this review. Though the adsorption capacities are high for the composites studied, partition coefficient which suggest the performance of composites remain low for most adsorbents. Despite the recent progress in the synthesis of LDHs-biochar composites, further research is needed to improve the performance of composites for different classes of aquatic pollutants, and to test their applicability in pilot-scale with real wastewater under real environmental conditions.

Synthesis of novel biocomposite powder for simultaneous removal of hazardous ciprofloxacin and methylene blue: Central composite design, kinetic and isotherm studies using Brouers-Sotolongo family models

Over the past decades, extensive efforts have been made to use biomass-based-materials for wastewater-treatment. The first purpose of this study was to develop and characterize regenerated-reed/reed-charcoal (RR-ChR), an enhanced biosorbent from Tunisian-reed (Phragmites-australis). The second aim was to assess and optimize the RR-ChR use for the removal of binary ciprofloxacin antibiotic (CIP) and methylene blue dye (MB), using Central Composite Design under Response Surface methodology. The third purpose was to explain the mechanisms involved in the biosorption-process. The study revealed that the highest removal-percentages (76.66 % for the CIP and 100 % for the MB) were obtained under optimum conditions: 1.55 g/L of adsorbent, 35 mg/L of CIP, 75 mg/L of MB, a pH of 10.42 and 115.28 min contact time. It showed that the CIP biosorption mechanism was described by Brouers-Sotolongo-fractal model, with regression-coefficient (R²) of 0.9994 and a Person's Chi-square (X²) of 0.01. The Hill kinetic model better described the MB biosorption (R² = 1 and X² = 1.0E-4). The isotherm studies showed that the adsorbent surface was heterogeneous and the best nonlinear-fit was obtained with the Jovanovich (R² = 0.9711), and Brouers-Sotolongo (R² = 0.9723) models, for the CIP and MB adsorption, respectively. Finally, the RR-ChR lignocellulosic-biocomposite-powder could be adopted as efficient and cost-effective adsorbent.

Brewery wastewater treatment and resource recovery through long term continuous-mode operation in pilot photosynthetic bacteria-membrane bioreactor

Photosynthetic bacteria (PSB) are considered ideal for high COD wastewater treatment and resource recovery. This work is the first continuous-mode long-term (440 days) pilot study (240 L) by using PSB-membrane (PSB-MBR) system for such purpose. Results showed that the system started-up in 27 days for brewery wastewater and then stably operated under various temperature, initial COD and pH conditions, which showed fast start-up and strong robustness. Comparing with small-batch PSB-MBR system, the capacity of pollutants treatment degradation rate in the pilot-continuous PSB-MBR system was promoted. The operation parameters for pilot-continuous PSB-MBR system were determined as follows: light-micro aerobic, 72 h hydraulic retention time, 1200 mg L^-1 inoculum size and 1.0 g L^-1 d^-1 organic loading rate, 2.5 F/M. Under these conditions, the COD and NH₄⁺ in effluent were below 80 and 15 mg L^-1, respectively. The PSB cell production reached 483.5 mg L^-1 d^-1 with protein, polysaccharides, carotenoid, bacteriochlorophyll, and coenzyme Q10 of 420.9, 177.6, 2.53, 10.75, 38.6 mg g^-1, respectively, showing great potential of resource recovery from organic wastewater. In addition, the collected biomass had no acute toxicity to crucian carps. This work provides a base for the scale-up of this novel technology.

Enhanced photocatalytic activity using GO/TiO2 catalyst for the removal of DCA solutions

This work aimed to optimize high-performance photocatalysts based on graphene oxide/titanium dioxide (GO/TiO₂) nanocomposites for the effective degradation of aqueous pollutants. The catalytic activity was tested against the degradation of dichloroacetic acid (DCA), a by-product of disinfection processes that is present in many industrial wastewaters and effluents. GO/TiO₂ photocatalysts were prepared using three different methods, hydrothermal, solvothermal, and mechanical, and varying the GO/TiO₂ ratio in the range of 1 to 10%. Several techniques were applied to characterize the catalysts, and better coupling of GO and TiO₂ was observed in the thermally synthesized composites. Although the results obtained for DCA degradation showed a coupled influence of the composite preparation method and its composition, promising results were obtained with the photocatalysts compared to the limited activity of conventional TiO₂. In the best case, corresponding to the composite synthesized via hydrothermal method with 5% of GO/TiO₂ weight ratio, an enhancement of 2.5 times of the photocatalytic degradation yield of DCA was obtained compared to bare TiO₂, thus opening more efficient ways to promote the application of photocatalytic remediation technologies.

Effective swine wastewater treatment by combining microbial fuel cells with flocculation

Microbial fuel cells (MFCs) provide a cost-effective method for treating swine wastewater treatment and simultaneously producing electricity, yet they need to be combined with other wastewater treatment processes to improve the effluent water quality. In this paper, we constructed single-chamber air-cathode MFCs with a compact configuration for nitrogen and COD removal and high electricity production and combined them with a low-cost flocculation process to discharge higher quality wastewater. We show that MFCs could remove ammonia at a rate of 269.2 ± 0.5 g m^-3 d^-1 (99.1± 0.1% ammonia removal efficiency) with a maximum power density of 37.5 W m^-3 and 21.6% of coulombic efficiency at a 40:60 ratio of raw swine wastewater to denitrification effluent of swine wastewater. Up to 82.5 ± 0.5% COD could be removed with MFCs, from 2735 ± 15 mg L^-1 to 480 ± 15 mg L^-1, and flocculation further reduced levels to 90 ± 1 mg L^-1 for a 96.6 ± 0.2% overall COD removal efficiency of the combination technology. Cost analysis of the combined MFC and flocculation process showed a net economic benefit of $ 0.026 m^-3. In summary, this novel combination wastewater treatment method provides an effective way to treat swine wastewater to low pollutant levels in the effluent at low cost (a net gain).

Effects of single and combined copper/perfluorooctane sulfonate on sequencing batch reactor process and microbial community in activated sludge

Long-term exposure experiments with single and combined pollutants of copper (Cu)/perfluorooctane sulfonate (PFOS) were conducted to explore the influence on activated sludge in SBRs. Compared with the control, the removal of organics, nitrogen and phosphorus in the presence of PFOS exhibited no apparent difference, but reduced in different degrees when Cu and Cu/PFOS existed. PFOS exposure deteriorated the settling performance of activated sludge with SVI value and amount of extracellular polymeric substance (EPS) increasing, but posed little impacts on microbial activity (dehydrogenase, protease) and antioxidant activity (SOD, CAT). Under Cu and Cu/PFOS loading, dehydrogenase and protease activity were observed to decrease as well as SOD and CAT activity. The sequencing results revealed that bacterial richness and community diversity reduced under Cu and Cu/PFOS exposure. Overall, adverse effect of combined pollution was lower than that of single Cu in long-time due to antagonistic effect existed between Cu and PFOS.

GD in synthetic municipal wastewater

Sulfate is a primary sulfur source and can be available in wastewaters. Nevertheless, effect of sulfate ions on growth and pollutants removal of microalgae seems to be less investigated. At the present study, self-flocculating microalga Chlorococcum sp. GD was grown in synthetic municipal wastewater with different sulfate concentrations. Results indicated that Chlorococcum sp. GD grew better in synthetic municipal wastewater with 18, 45, 77, 136 and 271mg/L SO₄^2- than in wastewater without SO₄^2-. Chlorococcum sp. GD had also excellent removal efficiencies of nitrogen and phosphorus and effectively flocculated in sulfate wastewater. Sulfate deprivation weakened the growth, pollutants removal and self-flocculation of Chlorococcum sp. GD in wastewater. Antioxidative enzymes activity significantly increased and photosynthetic activity significantly decreased when Chlorococcum sp. GD was cultivated in sulfate-free wastewater. Sulfate deprivation probably reduced cell activity of growth, pollutants removal and flocculation via inducing the over-accumulation of reactive oxygen species (ROS).