Insights into tailoring composite solid polymer electrolytes for solid-state lithium batteries

Synergistic design of 3D Na3.2Zr1.9Ca0.1Si2PO12-based composite solid electrolyte via in-situ polymerization for solid-state sodium batteries

The growing demand for sustainable and high-performance energy storage solutions has driven significant advancements in sodium-ion batteries (SIBs) as a cost-effective and eco-friendly alternative to lithium-ion batteries (LIBs). This study introduces a composite solid electrolyte (CSE) designed for solid-state sodium batteries (SSSBs), leveraging a 3D NASICON framework to address challenges associated with ionic conductivity, mechanical stability, and interfacial resistance. The CSE was synthesized through in-situ polymerization of butyl acrylate (BA) within a porous Na3.2Zr1.9Ca0.1Si2PO12 (NZCSP) framework fabricated via a tape casting method. The resulting structure achieved an ionic conductivity of 7.1 × 10-4 S cm-1 at 30 °C, electrochemical stability up to 4.88 V versus Na/Na+, and a sodium-ion transference number (tNa+) of 0.62. Na|CSE|Na symmetric cells exhibit remarkable sodium stripping/plating stability with minimal overpotential over 1000 h. Na|3D-NZCSP-CSE| Na3Mg0.5V1.95(PO4)3@C (NVMP@C) cells exhibited excellent performance, retaining 95 % of their initial capacity after 500 cycles at 1.0C and maintaining a specific discharge capacity of 94.4 mAh g-1. These findings demonstrate the potential of 3D framework-based CSEs to advance the practical application of SSSBs, offering a pathway to safer, more efficient, and cost-effective energy storage technologies.

Ion Substitution-Induced Distorted MOF Lattice with Deviated Energy and Dielectric Properties for Quasi-Solid-State Ion Conductor

Solid-state electrolytes are currently receiving increasing interest due to their high mechanical strength and chemical stability for safe battery construction. However, their poor ion conduction and unclear conduction mechanism need further improvement and exploration. This study focuses on a hybrid solid-state electrolyte containing MOF-based scaffolds, using metal salts as the conductor. In this paper, we employ an ion substitution strategy to manipulate the scaffold structure at the lattice level by replacing hydrogen with larger alkali cations. The research systematically presents how changes in the lattice affect the physical and chemical properties of MOFs and emphasizes the role of scaffold-salt interactions in the evolution of ion conduction. The results reveal that long range-ordered structural distortion can enhance permittivity at 1 Hz, from 58 ohms to more than 10 M ohms, which can boost ion pairs dissociation and improve the transference number from 4.7% to 22.6%. Defects in the lattice can help stabilize the intermediate state in the charge transfer process and lower the corresponding impedance from 2.6 MΩ to 559 Ω.

Composite Polymer Solid Electrolytes for All-Solid-State Sodium Batteries

Sodium-ion batteries (SIBs) are emerging as a promising alternative to lithium-ion batteries, primarily due to their plentiful raw materials and cost-effectiveness. However, the use of traditional organic liquid electrolytes in sodium battery applications presents significant safety risks, prompting the investigation of solid electrolytes as a more viable solution. Despite their advantages, single solid electrolytes encounter challenges, including low conductivity of sodium ions at room temperature and incompatibility with electrode materials. To overcome these limitations, the researchers develop composite polymer solid electrolytes (CPSEs), which merge the strengths of high ionic conductivity of inorganic solid electrolytes and the flexibility of polymer solid electrolytes. CPSEs are usually composed of inorganic materials dispersed in the polymer matrix. The final performance of CPSEs can be further improved by optimizing the particle size, relative content, and form of inorganic fillers. CPSEs show great advantages in improving ionic conductivity and interface compatibility, making them an important direction for future solid-state sodium battery research. Therefore, this paper summarizes recent advancements in composite solid electrolytes, discusses the impact of their preparation processes on performance, and outlines potential future developments in sodium-ion solid-state batteries.

Constructing Multi-Electron Reactions by Doping Mn2+ to Increase Capacity and Stability in K3.2V2.8Mn0.2(PO4)4/C of Phosphate Cathodes for Potassium-Ion Batteries

Vanadium-based phosphate cathode materials (e.g., K3V2(PO4)3) have attracted widespread concentration in cathode materials in potassium-ion batteries owing to their stable structure but suffer from low capacity and poor conductivity. In this work, an element doping strategy is applied to promote its electrochemical performance so that K3.2V2.8Mn0.2(PO4)4/C is prepared via a simple sol-gel method. The heterovalent Mn2+ is introduced to stimulated multiple electron reactions to improve conductivity and capacity, as well as interlayer spacing. Galvanostatic intermittent titration technique (GITT) and in situ X-ray diffraction results further confirm that Mn-doping in the original electrode can obtain superior electrode process kinetics and structural stability. The prepared K3.2V2.8Mn0.2(PO4)4/C exhibits a high-capacity retention of 80.8% after 1 500 cycles at 2 C and an impressive rate capability, with discharge capacities of 87.6 at 0.2 C and 45.4 mA h g-1 at 5 C, which is superior to the majority of reported vanadium-based phosphate cathode materials. When coupled K3.2V2.8Mn0.2(PO4)4/C cathode with commercial porous carbon (PC) anode as the full cell, a prominent energy density of 175 Wh kg-1 is achieved based on the total active mass. Overall, this study provides an effective strategy for meliorating the cycling stability and capacity of the polyanion cathodes for KIB.

DNA: Novel Crystallization Regulator for Solid Polymer Electrolytes in High-Performance Lithium-Ion Batteries

In this work, we designed a novel polyvinylidene fluoride (PVDF)@DNA solid polymer electrolyte, wherein DNA, as a plasticizer-like additive, reduced the crystallinity of the solid polymer electrolyte and improved its ionic conductivity. At the same time, due to its Lewis acid effect, DNA promotes the dissociation of lithium salts when interacting with lithium salt anions and can also fix the anions, creating more free lithium ions in the electrolyte and thus improving its ionic conductivity. However, owing to hydrogen bonding between DNA and PVDF, excess DNA occupies the lone pairs of electrons of the fluorine atoms on the PVDF molecular chains, affecting the conduction of lithium ions and the conductivity of the solid electrolyte. Hence, in this study, we investigated the effects of adding different DNA amounts to solid polymer electrolytes. The results show that 1% DNA addition resulted in the best improvement in the electrochemical performance of the electrolyte, demonstrating a high ionic conductivity of 3.74 × 10-5 S/cm (25 °C). The initial capacity reached 120 mAh/g; moreover, after 500 cycles, the all-solid-state batteries exhibited a capacity retention of approximately 71%, showing an outstanding cycling performance.

Advancements in Polyethylene Oxide (PEO)-Active Filler Composite Polymer Electrolytes for Lithium-Ion Batteries: A Comprehensive Review and Prospects

Polyethylene oxide (PEO) has become a highly sought-after polymer electrolyte for lithium-ion batteries (LIBs) due to its high ionic conductivity, strong mechanical properties, and broad electrochemical stability range. However, its usefulness is hindered by its limited ionic conductivity at typical temperatures (<60 °C). Many researchers have delved into the integration of active fillers into the PEO matrix to improve the ionic conductivity and overall efficiency of composite polymer electrolytes (CPEs) for LIBs. This review delves deeply into the latest developments and insights in CPEs for LIBs, focusing on the role of PEO-active filler composites. It explores the impact of different types and morphologies of active fillers on the electrochemical behavior of CPEs. Additionally, it explores the mechanisms that contribute to the improved ionic conductivity and Li-ion transport in PEO-based CPEs. This paper also emphasizes the present obstacles and prospects in the advancement of CPEs containing PEO-active filler composites for LIBs. It serves as a valuable reference for scientists and engineers engaged in the domain of advanced energy storage systems, offering insights for the forthcoming development and enhancement of CPEs to achieve superior performance in LIBs.

Microporous Materials in Polymer Electrolytes: The Merit of Order

Solid-state batteries (SSBs) have garnered significant attention in the critical field of sustainable energy storage due to their potential benefits in safety, energy density, and cycle life. The large-scale, cost-effective production of SSBs necessitates the development of high-performance solid-state electrolytes. However, the manufacturing of SSBs relies heavily on the advancement of suitable solid-state electrolytes. Composite polymer electrolytes (CPEs), which combine the advantages of ordered microporous materials (OMMs) and polymer electrolytes, meet the requirements for high ionic conductivity/transference number, stability with respect to electrodes, compatibility with established manufacturing processes, and cost-effectiveness, making them particularly well-suited for mass production of SSBs. This review delineates how structural ordering dictates the fundamental physicochemical properties of OMMs, including ion transport, thermal transfer, and mechanical stability. The applications of prominent OMMs are critically examined, such as metal-organic frameworks, covalent organic frameworks, and zeolites, in CPEs, highlighting how structural ordering facilitates the fulfillment of property requirements. Finally, an outlook on the field is provided, exploring how the properties of CPEs can be enhanced through the dimensional design of OMMs, and the importance of uncovering the underlying "feature-function" mechanisms of various CPE types is underscored.

The sensitive aspects of modelling polymer-ceramic composite solid-state electrolytes using molecular dynamics simulations

Solid-state composite electrolytes have arisen as one of the most promising materials classes for next-generation Li-ion battery technology. These composites mix ceramic and solid-polymer ion conductors with the aim of combining the advantages of each material. The ion-transport mechanisms within such materials, however, remain elusive. This knowledge gap can to a large part be attributed to difficulties in studying processes at the ceramic-polymer interface, which are expected to play a major role in the overall ion transport through the electrolyte. Computational efforts have the potential of providing significant insight into these processes. One of the main challenges to overcome is then to understand how a sufficiently robust model can be constructed in order to provide reliable results. To this end, a series of molecular dynamics simulations are here carried out with a variation of certain structural (surface termination and polymer length) and pair potential (van der Waals parameters and partial charges) models of the Li7La3Zr2O12 (LLZO) poly(ethylene oxide) (PEO) system, in order to test how sensitive the outcome is to each variation. The study shows that the static and dynamic properties of Li-ion are significantly affected by van der Waals parameters as well as the surface terminations, while the thickness of the interfacial region - where the structure-dynamic properties are different as compared to the bulk-like regime - is the same irrespective of the simulation setup.

Construction of a High-Performance Composite Solid Electrolyte Through In-Situ Polymerization within a Self-Supported Porous Garnet Framework

Composite solid electrolytes (CSEs) have emerged as promising candidates for safe and high-energy-density solid-state lithium metal batteries (SSLMBs). However, concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for SSLMBs. To overcome these challenges, we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li6.4La3Zr1.4Ta0.6O12 (LLZT) to produce the CSE. The synergy of the continuous conductive LLZT network, well-organized polymer, and their interface can enhance the ionic conductivity of the CSE at room temperature. Furthermore, the in-situ polymerization process can also construct the integration and compatibility of the solid electrolyte-solid electrode interface. The synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm-1, a significant lithium transference number of 0.627, and exhibited electrochemical stability up to 5.06 V vs. Li/Li+ at 30 °C. Moreover, the Li|CSE|LiNi0.8Co0.1Mn0.1O2 cell delivered a discharge capacity of 105.1 mAh g-1 after 400 cycles at 0.5 C and 30 °C, corresponding to a capacity retention of 61%. This methodology could be extended to a variety of ceramic, polymer electrolytes, or battery systems, thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy-density SSLMBs.

Technological Advances and Market Developments of Solid-State Batteries: A Review

Batteries are essential in modern society as they can power a wide range of devices, from small household appliances to large-scale energy storage systems. Safety concerns with traditional lithium-ion batteries prompted the emergence of new battery technologies, among them solid-state batteries (SSBs), offering enhanced safety, energy density, and lifespan. This paper reviews current state-of-the-art SSB electrolyte and electrode materials, as well as global SSB market trends and key industry players. Solid-state electrolytes used in SSBs include inorganic solid electrolytes, organic solid polymer electrolytes, and solid composite electrolytes. Inorganic options like lithium aluminum titanium phosphate excel in ionic conductivity and thermal stability but exhibit mechanical fragility. Organic alternatives such as polyethylene oxide and polyvinylidene fluoride offer flexibility but possess lower ionic conductivity. Solid composite electrolytes combine the advantages of inorganic and organic materials, enhancing mechanical strength and ionic conductivity. While significant advances have been made for composite electrolytes, challenges remain for synthesis intricacies and material stability. Nuanced selection of these electrolytes is crucial for advancing resilient and high-performance SSBs. Furthermore, while global SSB production capacity is currently below 2 GWh, it is projected to grow with a >118% compound annual growth rate by 2035, when the potential SSB market size will likely exceed 42 billion euros.

Gel Polymer Electrolytes: Advancing Solid-State Batteries for High-Performance Applications

Gel polymer electrolytes (GPEs) hold tremendous potential for advancing high-energy-density and safe rechargeable solid-state batteries, making them a transformative technology for advancing electric vehicles. GPEs offer high ionic conductivity and mechanical stability, enabling their use in quasi-solid-state batteries that combine solid-state interfaces with liquid-like behavior. Various GPEs based on different materials, including flame-retardant GPEs, dendrite-free polymer gel electrolytes, hybrid solid-state batteries, and 3D printable GPEs, have been developed. Significant efforts have also been directed toward improving the interface between GPEs and electrodes. The integration of gel-based electrolytes into solid-state electrochemical devices has the potential to revolutionize energy storage solutions by offering improved efficiency and reliability. These advancements find applications across diverse industries, particularly in electric vehicles and renewable energy. This review comprehensively discusses the potential of GPEs as solid-state electrolytes for diverse battery systems, such as lithium-ion batteries (LiBs), lithium metal batteries (LMBs), lithium-oxygen batteries, lithium-sulfur batteries, zinc-based batteries, sodium-ion batteries, and dual-ion batteries. This review highlights the materials being explored for GPE development, including polymers, inorganic compounds, and ionic liquids. Furthermore, it underscores the transformative impact of GPEs on solid-state batteries and their role in enhancing the performance and safety of energy storage devices.