Green synthesis of silver, gold and silver/gold bimetallic nanoparticles using the Gloriosa superba leaf extract and their antibacterial and antibiofilm activities

A novel controlled release system Au-CuONP/P(MMAcoMAA)/chitosan nanocomposites: Synthesis, characterization, antimicrobial activity and in silico molecular docking

The aim of the study is to synthesize antibacterial nanocomposites containing green synthesized bimetal nanoparticles, which offers a low-cost and environmentally friendly application opportunity in order to employ in drug delivery. In the study, cotoneaster (Cotoneaster horizontalis) fruits, laurel (Laurus nobilis) and sage (Salvia officinalis) leaves grown in the natural flora of Turkey were used for the synthesis of Au-CuO nanoparticles. Chitosan/nanochitosan and P(MMAcoMAA) containing nanocomposite material was synthesized with the obtained bimetallic nanoparticles. Characterization of the prepared nanocomposite was performed by FT-IR, XRD, SEM, UV-Vis and DLS. Antibacterial activities against E. coli and S. aureus and antifungal activities against A. niger were investigated. The usability of the developed nanocomposite in controlled release systems was tested in the BSA model. The binding affinities of Au-CuO nanoparticles to E. coli β-lactamase, S. aureus TMK and A. niger Fdc1 enzymes were also determined and possible antibacterial and antifungal mechanisms were simulated by molecular docking analysis. Au-CuO NPs showed absorbance peaks between 273-276 and 542-552 nm corresponding to CuO and Au, respectively in UV-Vis analysis evaluating the presence of bimetallic NPs. The peaks observed between 567 and 602 cm-1 in all samples in FT-IR analysis proves the presence of metal-oxides. In SEM images, it was seen that Au-CuO NPs are between 10 and 90 nm and nanocomposites were homogeneously distributed porous matrix structures. 2θ values in XRD patterns of Au-CuO NPs were 38.2°, 44.5°, 64.7° and 77.7° and corresponded to Au and CuO phases, and peaks from both phases represented successful nanoparticle and nanocomposite formation containing bimetal structure. All synthesized materials showed strong antimicrobial activity, close to commercial antibiotics. Inhibition zone of nanocomposite was measured as 25 mm against E. coli, 26 mm against S. aureus and 28 mm against A. niger. MIC and MBC values of nanoparticles and nanocomposites were higher against Gram (-) bacteria. Controlled drug release was studied on the BSA model for 7 days and while the release of the chitosan-containing nanocomposite was 91 % at the end of the period, the nanochitosan sample released 88 %. The binding energies of the synthesized Au-CuO NPs to β-lactamase, TMK and Fdc1 obtained in the molecular docking analysis, were -1.68, -1.60 and -2.16 kcal/mol, respectively. The results showed that a nanomaterial with controlled release capability, antibacterial and antifungal properties that can contain proteins was produced.

Synthesis of novel MgO-ZnO nanocomposite using Pluchea indica leaf extract and study of their biological activities

The biosynthesis of bimetallic nanoparticles using plant extracts has garnered significant attention due to their eco-friendly and cost-effective nature. This study aimed to biosynthesize magnesium oxide-zinc oxide nanocomposite (MgO-ZnO nanocomposite) using Pluchea indica leaf extract for the first time, with a focus on characterizing its physicochemical properties and evaluating its biological activities. The biosynthesized MgO-ZnO nanocomposite was fully characterized, revealing an absorbance peak at 300 nm using UV-vis spectroscopy. Transmission electron microscopy (TEM) confirmed particle stability within the size range of 5-35 nm. Cytotoxicity analysis on the Wi 38 normal cell line demonstrated an IC50 value of 179.13 µg/mL, indicating good biosafety. The nanocomposite exhibited potent anticancer activity, with IC50 values of 73.61 µg/mL and 31.25 µg/mL against Hep-G2 and MCF-7 cancer cell lines, respectively. Antibacterial assays revealed activity against Klebsiella pneumoniae, Escherichia coli, Bacillus cereus, Staphylococcus aureus, and Candida albicans, with minimum inhibitory concentrations (MICs) ranging from 31.25 to 250 µg/mL. Furthermore, the nanocomposite displayed antioxidant activity with an IC50 value of 175 µg/mL, as determined by the DPPH assay. In conclusion, the successful synthesis of the MgO-ZnO nanocomposite using P. indica leaf extract demonstrates its potential as a safe and effective agent for concentration-dependent antioxidants, antibacterial, and anticancer applications. This study highlights the versatility of plant-mediated biosynthesis in developing functional nanomaterials for biomedical use.

Eco-Friendly Synthesis, Characterization, and Biomedical Applications of Biosynthesized Bimetallic Silver-Gold Nanoparticles by Culture Supernatant of Aspergillus niger

Green synthesis of bimetallic nanoparticles of noble metals is highly desirable in nanomedicine because of their potential use as anticoagulant, thrombolytic and anticancer agents. In this study, it was discovered that the filamentous fungus Aspergillus niger proved effective in producing bimetallic Ag-Au nanoparticles. A. niger culture supernatant was able to produce Ag-AuNPs by reducing the solution of chloroauric acid/silver nitrate (1.0:1.0 mM) within 2 min at 100 °C and pH 8. Experimental Ag-AuNP detection was performed by visually observing the color change to reddish brown. The produced nanoparticles displayed maximal absorbance at 530 nm in UV-vis spectroscopy. According to transmission electron microscopy, most of the nanoparticles were spherical, with a mean diameter of 8-10 nm. The biosynthesis of Ag-AuNPs by A. niger was confirmed by Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive X-ray analytical techniques. Its zeta potential was discovered to be -34.01 mV. The biosynthesized Ag-AuNPs exhibited effective thrombolytic and antiplatelet aggregation actions by totally preventing and dissolving the blood clot which was verified by microscopic examination, amelioration of blood coagulation assays, and carrageenan-induced tail thrombosis model. The findings verified the effectiveness of biosynthesized Ag-AuNPs as a powerful antitumor agent against HepG2 and A549 cell lines with IC50 values of 15.57 and 27.07 μg/mL, respectively. Crystal violet assay validated the cytopathic effects of Ag-AuNPs on A549 and HepG2 cell lines. Therefore, the produced Ag-AuNPs from A. niger are a promising candidate in the management of thrombosis.

Bimetallic nanoparticles with sulfated galactan eliminate Vibrio parahaemolyticus in shrimp Penaeus vannamei

Bimetallic (Au/Ag) nanoparticles (BNPs) have shown enhanced antibacterial activity compared to their monometallic counterparts. Sulfated galactans (SG) are a naturally occurring polymer commonly found in red seaweed Gracilaria fisheri. They are biocompatible and biodegradable and environmentally friendly. In this study, we utilized SG in combination with BNPs to develop composite materials that potentially enhance antibacterial activity against shrimp pathogens Vibrio parahaemolyticus and Vibrio harveyi, compared to BNPs or SG alone. BNPs were coated with sulfated galactan (SGBNPs) and characterized using UV-vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, zeta potential, and transmission electron microscopy (TEM). UV-vis spectroscopy analysis revealed that the surface plasmon peaks of BNPs and SGBNPs appeared at 530 nm and 532 nm, respectively. Zeta potential measurements showed that SGBNPs had a negative charge of -32.4 mV, while the BNPs solution had a positive charge of 38.7 mV. TEM images demonstrated the spherical morphology of both BNPs and SGBNPs with narrow size distributions (3-10 nm). Analysis of the FTIR spectra indicated that SG maintained its backbone structure in SGBNPs, but some functional groups were altered. Notably, SGBNPs showed superior antimicrobial and antibiofilm activities against V. parahaemolyticus and V. harveyi compared to SG and BNPs. Furthermore, treatment with SGBNPs significantly down-regulated the expression of virulence-related genes (toxR, cpsQ, and mfpA) for V. parahaemolyticus 3HP compared to the respective control, bacteria treated with BNPs or SG. Diets supplemented with SGBNPs, BNPs, or SG showed no detrimental impact on the growth of shrimp Penaeus vannamei. Shrimp fed with SGBNPs-supplemented feed showed significantly higher survival rates than those fed with BNPs-supplemented feed when infected with 3HP after being on the supplemented feed for seven days and a subsequent number of fifteen days. These findings collectively demonstrate the benefit of using SG capped Au-Ag BNPs as an antibacterial agent for the prevention and control of Vibrio sp. Infection in shrimp while reducing the risk of environmental contamination.

In Vivo and in Vitro activity of colistin-conjugated bimetallic silver-copper oxide nanoparticles against Pandrug-resistant Pseudomonas aeruginosa

BACKGROUND

Addressing microbial resistance urgently calls for alternative treatment options. This study investigates the impact of a bimetallic formulation containing colistin, silver, and copper oxide on a pandrug-resistant, highly virulent Pseudomonas aeruginosa (P. aeruginosa) isolate from a cancer patient at the National Cancer Institute, Cairo University, Egypt.

METHODS

Silver nanoparticles (Ag NPs), copper oxide nanoparticles (CuO NPs), and bimetallic silver-copper oxide nanoparticles (Ag-CuO NPs) were synthesized using gamma rays, combined with colistin (Col), and characterized by various analytical methods. The antimicrobial activity of Col-Ag NPs, Col-CuO NPs, and bimetallic Col-Ag-CuO NPs against P. aeruginosa was evaluated using the agar well diffusion method, and their minimum inhibitory concentration (MIC) was determined using broth microdilution. Virulence factors such as pyocyanin production, swarming motility, and biofilm formation were assessed before and after treatment with bimetallic Col-Ag-CuO NPs. The in vivo efficacy was evaluated using the Galleria mellonella model, and antibacterial mechanism were examined through membrane leakage assay.

RESULTS

The optimal synthesis of Ag NPs occurred at a gamma ray dose of 15.0 kGy, with the highest optical density (OD) of 2.4 at 375 nm. Similarly, CuO NPs had an optimal dose of 15.0 kGy, with an OD of 1.5 at 330 nm. Bimetallic Ag-CuO NPs were most potent at 15.0 kGy, yielding an OD of 1.9 at 425 nm. The MIC of colistin was significantly reduced when combined with nanoparticles: 8 µg/mL for colistin alone, 0.046 µg/mL for Col-Ag NPs, and 0.0117 µg/mL for Col-Ag-CuO NPs. Bimetallic Col-Ag-CuO NPs reduced the MIC four-fold compared to Col-Ag NPs. Increasing the sub-inhibitory concentration of bimetallic nanoparticles from 0.29 × 10-2 to 0.58 × 10-2 µg/mL reduced P. aeruginosa swarming by 32-64% and twitching motility by 34-97%. At these concentrations, pyocyanin production decreased by 39-58%, and biofilm formation was inhibited by 33-48%. The nanoparticles were non-toxic to Galleria mellonella, showing 100% survival by day 3, similar to the saline-treated group.

CONCLUSIONS

The synthesis of bimetallic Ag-CuO NPs conjugated with colistin presents a promising alternative treatment for combating the challenging P. aeruginosa pathogen in hospital settings. Further research is needed to explore and elucidate the mechanisms underlying the inhibitory effects of colistin-bimetallic Ag-CuO NPs on microbial persistence and dissemination.

Metal-based nanoparticles: an alternative treatment for biofilm infection in hard-to-heal wounds

Metal-based nanoparticles (MNPs) are promoted as effective compounds in the treatment of bacterial infections and as possible alternatives to antibiotics. These MNPs are known to affect a broad spectrum of microorganisms using a multitude of strategies, including the induction of reactive oxygen species and interaction with the inner structures of the bacterial cells. The aim of this review was to summarise the latest studies about the effect of metal-based nanoparticles on pathogenic bacterial biofilm formed in wounds, using the examples of Gram-positive bacterium Staphylococcus aureus and Gram-negative bacterium Pseudomonas aeruginosa, as well as provide an overview of possible clinical applications.

Induction of tomato plant biochemical immune responses by the synthesized zinc oxide nanoparticles against wilt-induced Fusarium oxysporum

The current study used zinc oxide nanoparticles (ZnO-NPs) to protect the tomato plant against Fusarium wilt. Gamma rays were used to synthesize ZnO-NPs, and the designed ZnO-NPs were characterized using high-resolution transmission electron microscopy (HRTEM), scanning electron microscope (SEM), dynamic light scattering (DLS), energy-dispersive X-ray spectroscopy (EDX), and ultraviolet-visible (UV-Vis.) spectroscopy. We found that the 20 kGy dose is the most effective for ZnO-NPs synthesis, with the highest O.D. = 1.65 (diluted 3 times) at 400 nm. The scale of ZnO-NPs ranged from 10.45 to 75.25 nm with an average diameter of 40.20 nm. The results showed that the designed ZnO-NPs showed promising activity as a potent inducer of plant physiological immunity against Fusarium wilt disease. Likewise, ZnO-NPs significantly reduced the wilt disease symptoms incidence by 28.57% and high protection by 67.99% against F. oxysporum. Additionally, infected tomato plants treated with ZnO-NPs show improved shoot length (44.71%), root length (40.0%), number of leaves (60.0 %), chlorophyll a (36.93%), chlorophyll b (16.46%), and carotenoids (21.87%) versus infected plants. Notably, in the treatment of tomato seedlings, the beneficial effects of ZnO-NPs extended to increase not only in osmolyte contents but also total phenol contents in comparison with control plants. In conclusion, the designed ZnO-NPs can control Fusarium wilt disease and improve and develop biochemical compounds responsible for defense against fusarial infection.

Unveiling biological activities of biosynthesized starch/silver-selenium nanocomposite using Cladosporium cladosporioides CBS 174.62

BACKGROUND AND OBJECTIVES

Microbial cells capability to tolerate the effect of various antimicrobial classes represent a major worldwide health concern. The flexible and multi-components nanocomposites have enhanced physicochemical characters with several improved properties. Thus, different biological activities of biosynthesized starch/silver-selenium nanocomposite (St/Ag-Se NC) were assessed.

METHODOLOGY

The St/Ag-Se NC was biosynthesized using Cladosporium cladosporioides CBS 174.62 (C. cladosporioides) strain. The shape and average particle size were investigated using scanning electron microscope (SEM) and high-resolution transmission electron microscope (HR-TEM), respectively. On the other hand, the St/Ag-Se NC effect on two cancer cell lines and red blood cells (RBCs) was evaluated and its hydrogen peroxide (H2O2) scavenging effect was assessed. Moreover, its effects on various microbial species in both planktonic and biofilm growth forms were examined.

RESULTS

The St/Ag-Se NC was successfully biosynthesized with oval and spherical shape and a mean particle diameter of 67.87 nm as confirmed by the HR-TEM analysis. St/Ag-Se NC showed promising anticancer activity toward human colorectal carcinoma (HCT-116) and human breast cancer (MCF-7) cell lines where IC50 were 21.37 and 19.98 µg/ml, respectively. Similarly, little effect on RBCs was observed with low nanocomposite concentration. As well, the highest nanocomposite H2O2 scavenging activity (42.84%) was recorded at a concentration of 2 mg/ml. Additionally, Staphylococcus epidermidis (S. epidermidis) ATCC 12,228 and Candida albicans (C. albicans) ATCC 10,231 were the highly affected bacterial and fungal strains with minimum inhibitory concentrations (MICs) of 18.75 and 50 µg/ml, respectively. Moreover, the noticeable effect of St/Ag-Se NC on microbial biofilm was concentration dependent. A high biofilm suppression percentage, 87.5% and 68.05%, were recorded with S. epidermidis and Staphylococcus aureus (S. aureus) when exposed to 1 mg/ml and 0.5 mg/ml, respectively.

CONCLUSION

The biosynthesized St/Ag-Se NC showed excellent antioxidant activity, haemocompatibility, and anti-proliferative effect at low concentrations. Also, it exhibited promising antimicrobial and antibiofilm activities.

Complementary imaging of nanoclusters interacting with mitochondria via stimulated emission depletion and scanning transmission electron microscopy

The emerging stress caused by nanomaterials in the environment is of great concern because they can have toxic effects on organisms. However, thorough study of the interactions between cells and diverse nanoparticles (NPs) using a unified approach is challenging. Here, we present a novel approach combining stimulated emission depletion (STED) microscopy and scanning transmission electron microscopy (STEM) for quantitative assessment, real-time tracking, and in situ imaging of the intracellular behavior of gold-silver nanoclusters (AuAgNCs), based on their fluorescence and electron properties. The results revealed an aggregated state of AuAgNCs within the mitochondria and an increase in sulfur content in AuAgNCs, presumably owing to their reaction with thiol-containing molecules inside the mitochondria. Moreover, AuAgNCs (100 μg/mL) induced a 75% decline in mitochondrial membrane potential and a 12-fold increase of mitochondrial reactive oxygen species in comparison to control. This mitochondrial damage may be triggered by the reaction of AuAgNCs with thiol, which provides direct imaging evidence for uncovering the action mechanism of AuAgNCs on the mitochondria. The proposed dual-imaging strategy using STED and STEM is a potential tool to offer valuable insights into cytotoxicity between subcellular structures and diverse NPs, and can serve as a key strategy for nanomaterial biosafety assessment.

Gum Arabic assisted the biomass synthesis of bimetallic silver copper oxide nanoparticles using gamma-rays for improving bacterial and viral wound healing: Promising antimicrobial activity against foot and mouth disease

In this work, gamma irradiation was used to create bimetallic silver‑copper oxide nanoparticles (Ag-CuO NPs) in an ecologically acceptable way using gum Arabic (GA) polymer as a capping and reducing agent. Bimetallic Ag-CuO NPs were investigated through UV-Vis. spectroscopy, HR-TEM, SEM, DLS, and XRD examinations. The potency of antimicrobial and antibiofilm activities against a few bacterial isolates and Candida sp. had been investigated. Clinical investigations of 30 cows and 20 buffaloes from different sites in Egypt's Sharkia governorate found ulcerative lesions on the mouth and interdigital region. The cytotoxic assay of the generated NPs on BHK-21 was examined. The bimetallic Ag-CuO NPs had an average diameter of 25.58 nm, and the HR-TEM results showed that they were spherical. According to our results, Ag-CuO NPs exhibited the highest antibacterial efficacy against S. aureus (26.5 mm ZOI), K. pneumoniae (26.0 mm ZOI), and C. albicans (28.5 mm ZOI). The growth of biofilms was also successfully inhibited through the application of Ag-CuO NPs by 88.12 % against S. aureus, 87.08 % against C. albicans, and 74.0 % against B. subtilis. The ulcers on the mouth and foot of diseased animals healed in 4-5 days and 1 week, respectively, following topical application of bimetallic Ag-CuO NPs. The results examined the potential protective effects of a dosage of 3.57 μg/mL on cells before viral infection (cell control). According to our research, bimetallic Ag-CuO NPs limit the development of the virus that causes foot-and-mouth disease (FMD). The reduction of a specific FMD virus's cytopathic impact (CPE) on cell development represented the inhibitory effect when compared to identical circumstances without pretreatment with bimetallic Ag-CuO NPs. Their remarkable antibacterial properties at low concentration and continued-phase stability suggest that they may find widespread use in a variety of pharmacological and biological applications, especially in the wound-healing process.

Harnessing the potential of bimetallic nanoparticles: Exploring a novel approach to address antimicrobial resistance

The growing global importance of antimicrobial resistance (AMR) in public health has prompted the creation of innovative approaches to combating the issue. In this study, the promising potential of bimetallic nanoparticles (BMNPs) was investigated as a novel weapon against AMR. This research begins by elaborating on the gravity of the AMR problem, outlining its scope in terms of the effects on healthcare systems, and stressing the urgent need for novel solutions. Because of their unusual features and wide range of potential uses, bimetallic nanoparticles (BMNPs), which are tiny particles consisting of two different metal elements, have attracted a lot of interest in numerous fields. This review article provides a comprehensive analysis of the composition, structural characteristics, and several synthesis processes employed in the production of BMNPs. Additionally, it delves into the unique properties and synergistic effects that set BMNPs apart from other materials. This review also focuses on the various antimicrobial activities shown by bimetallic nanoparticles, such as the rupturing of microbial cell membranes, the production of reactive oxygen species (ROS), and the regulation of biofilm formation. An extensive review of in vitro studies confirms the remarkable antibacterial activity of BMNPs against a variety of pathogens and sheds light on the dose-response relationship. The efficacy and safety of BMNPs in practical applications are assessed in this study. It also delves into the synergistic effects of BMNPs with traditional antimicrobial drugs and their ability to overcome multidrug resistance, providing mechanistic insight into these phenomena. Wound healing, infection prevention, and antimicrobial coatings on medical equipment are only some of the clinical applications of BMNPs that are examined, along with the difficulties and possible rewards of clinical translation. This review covers nanoparticle-based antibacterial regulation and emerging uses. The essay concludes with prospects for hybrid systems, site-specific targeting, and nanoparticle-mediated gene and drug delivery. In summary, bimetallic nanoparticles have surfaced as a potential solution, offering the public a more promising and healthier future.

Bimetallic nanoparticle production using Cannabis sativa and Vitis vinifera waste extracts

The utilization of waste materials for the synthesis of nanoparticles has gained significant attention due to its potential for waste valorization and contribution to circular economy. In this study, bimetallic nanoparticles were produced using extracts derived from Cannabis sativa and Vitis vinifera waste, focusing on their green synthesis and antimicrobial activity against Gram-negative bacteria, specifically several strains of Pseudomonas aeruginosa. The Vitis vinifera canes and post-extraction waste from Cannabis sativa were processed using an ethanol extraction method. The extract was then mixed with silver nitrate and tetrachloroauric acid solution at different reagent ratios to optimize the synthesis process. The resulting bimetallic nanoparticles (AgAuNPs) were characterized using UV-vis spectrophotometry, transmission electron microscopy, atomic absorption spectrometry, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The antimicrobial activity of the biosynthesized AgAuNPs was evaluated against various strains of Pseudomonas aeruginosa. The minimal inhibitory concentration (MIC) was determined using a microcultivation device, and the minimal bactericidal concentration (MBC) was determined through subsequent solid medium cultivation. Additionally, the minimal biofilm inhibitory concentration (MBIC) was assessed using a polystyrene microtiter plate as biofilm carrier and measured through an assay determining the metabolic activity of biofilm cells. The results demonstrated successful synthesis of bimetallic nanoparticles using the extracts from Cannabis sativa and Vitis vinifera waste. The AgAuNPs exhibited significant antimicrobial activity against the tested Pseudomonas aeruginosa strains, inhibiting their growth and biofilm formation. These findings highlight the potential of waste valorization and circular economy in nanoparticle production and their application as effective antimicrobial agents. This study contributes to the growing field of sustainable nanotechnology and provides insights into the utilization of plant waste extracts for the synthesis of bimetallic nanoparticles with antimicrobial properties. The findings support the development of eco-friendly and cost-effective approaches for nanoparticle production while addressing the challenges of waste management and combating microbial infections.

Pyto-Architechture of Ag, Au and Ag-Au bi-metallic nanoparticles using waste orange peel extract for enable carcinogenic Congo red dye degradation

Ecologically inspired to develop silver, gold and silver/gold bimetallic nanoparticles from discarded orange peel extract. The plant-derived compounds included in discarded orange peel extract have been accountable for the development of Ag, Au and Ag-Au bimetallic nanoparticles, that might be used in the biosynthetic process. The qualitative assessment of developed silver, gold and silver/gold bimetallic nanoparticles has been performed by UV-visible, XRD pattern, FT IR analysis, TEM/HRTEM, EDX and BET isotherm analysis. In this investigation, the photocatalytic effect of developed silver, gold and silver/gold bimetallic nanoparticles on Congo red dye breakdown efficiency was achieved at 96%, 94%, and 99.2%, respectively. Due to prolonged electron-hole recombination process was investigated using UV irradiation and reused for up to 5 consecutive runs without significant loss of photocatalytic activity. Moreover, silver, gold, and silver/gold bimetallic nanoparticles manufactured in an environmentally benign manner could potentially contribute to the ecological cleanup.

Revolutionizing Nanotechnology with Filago desertorum Extracts: Biogenic Synthesis of Silver Nanoparticles Exhibiting Potent Antioxidant and Antibacterial Activities

In this study, we described the environmentally friendly biosynthesis of silver nanoparticles (AgNPs) utilizing ethanolic extract of Filago desertorum (F. desertorum) as a capping and reducing agent. We also looked at the antioxidant and antibacterial capacities of AgNPs. In order to determine the size, shape, and crystallinity of the created AgNPs, the current project was designed to produce AgNPs utilizing the crude extract of the F. desertorum. The effectiveness of the project was evaluated by UV-visible spectrophotometry, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. AgNPs are monodispersed and spherical and have 50 nm average particle diameters, as determined using Image J software calculations and SEM observation. Four significant peaks from an XRD study, located at 38.46, 44.63, 64.81, and 77.74 nm, were used to calculate the average crystalline size of AgNPs which was reported to be 15 nm. In the crude extract of F. desertorum, it is possible to see the functional group peaks of a number of substances that are essential for bioreduction and the stability of the AgNPs. Antibacterial and antioxidant properties of AgNPs in vitro (DPPH, ABTS, H2O2, phosphomolybdenum, and ferric reducing power) were examined using conventional methods. The AgNPs showed maximum DPPH (72.51% with IC50 = 144.61 μg/mL), ABTS (75.24% with IC50 = 131.21 μg/mL), hydrogen peroxide (73.33% with IC50 = 115.05 μg/mL), phosphomolybdenum activity (73.43% with IC50 = 75.25 μg/mL), and observing reducing power (0.25) at a concentration of 250 g/mL. Inhibition by the AgNPs against the bacterial strain Staphylococcus aureus was greatest (12 mm). According to the current findings, AgNPs produced by F. desertorum have the highest potential for free radical scavenging and antibacterial activity, which can result in antioxidant and antibiotic agents.

Revisiting the Green Synthesis of Nanoparticles: Uncovering Influences of Plant Extracts as Reducing Agents for Enhanced Synthesis Efficiency and Its Biomedical Applications

Background

Conventional nanoparticle synthesis methods involve harsh conditions, high costs, and environmental pollution. In this context, researchers are actively searching for sustainable, eco-friendly alternatives to conventional chemical synthesis methods. This has led to the development of green synthesis procedures among which the exploration of the plant-mediated synthesis of nanoparticles experienced a great development. Especially, because plant extracts can work as reducing and stabilizing agents. This opens up new possibilities for cost-effective, environmentally-friendly nanoparticle synthesis with enhanced size uniformity and stability. Moreover, bio-inspired nanoparticles derived from plants exhibit intriguing pharmacological properties, making them highly promising for use in medical applications due to their biocompatibility and nano-dimension.

Objective

This study investigates the role of specific phytochemicals, such as phenolic compounds, terpenoids, and proteins, in plant-mediated nanoparticle synthesis together with their influence on particle size, stability, and properties. Additionally, we highlight the potential applications of these bio-derived nanoparticles, particularly with regard to drug delivery, disease management, agriculture, bioremediation, and application in other industries.

Methodology

Extensive research on scientific databases identified green synthesis methods, specifically plant-mediated synthesis, with a focus on understanding the contributions of phytochemicals like phenolic compounds, terpenoids, and proteins. The database search covered the field's development over the past 15 years.

Results

Insights gained from this exploration highlight plant-mediated green synthesis for cost-effective nanoparticle production with significant pharmacological properties. Utilizing renewable biological resources and controlling nanoparticle characteristics through biomolecule interactions offer promising avenues for future research and applications.

Conclusion

This review delves into the scientific intricacies of plant-mediated synthesis of nanoparticles, highlighting the advantages of this approach over the traditional chemical synthesis methods. The study showcases the immense potential of green synthesis for medical and other applications, aiming to inspire further research in this exciting area and promote a more sustainable future.

Gamma rays-assisted bacterial synthesis of bimetallic silver-selenium nanoparticles: powerful antimicrobial, antibiofilm, antioxidant, and photocatalytic activities

BACKGROUND

Bimetallic nanoparticles (BNPs) has drawn a lot of attention especially during the last couple of decades. A bimetallic nanoparticle stands for a combination of two different metals that exhibit several new and improved physicochemical properties. Therefore, the green synthesis and design of bimetallic nanoparticles is a field worth exploring.

METHODS

In this study, we present a green synthesis of silver nanoparticles (Ag NPs), selenium (Se) NPs, and bimetallic Ag-Se NPs using Gamma irradiation and utilizing a bacterial filtrate of Bacillus paramycoides. Different Techniques such as UV-Vis., XRD, DLS, SEM, EDX, and HR-TEM, were employed for identifying the synthesized NPs. The antimicrobial and antibiofilm activities of both the Ag/Se monometallic and bimetallic Ag-Se NPs were evaluated against some standard microbial strains including, Aspergillus brasiliensis ATCC16404, Candida albicans ATCC10231, Alternaria alternate EUM108, Fusarium oxysporum EUM37, Escherichia coli ATCC11229, Bacillus cereus ATCC15442, Klebsiella pneumoniae ATCC13883, Bacillus subtilis ATCC15442, and Pseudomonas aeruginosa ATCC6538 as a model tested pathogenic microbes. The individual free radical scavenging potentials of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs were determined using the DPPH radical scavenging assay. The degradation of methylene blue (MB) dye in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was used to assess their photocatalytic behavior.

RESULTS

According to the UV-Vis. spectrophotometer, the dose of 20.0 kGy that results in Ag NPs with the highest O.D. = 3.19 at 390 nm is the most effective dose. In a similar vein, the optimal dose for the synthesis of Se NPs was 15.0 kGy dose with O.D. = 1.74 at 460 nm. With a high O.D. of 2.79 at 395 nm, the most potent dose for the formation of bimetallic Ag-Se NPs is 15.0 kGy. The recorded MIC-values for Ag-Se NPs were 62.5 µg mL- 1, and the data clearly demonstrated that C. albicans was the organism that was most susceptible to the three types of NPs. The MIC value was 125 µg mL- 1 for both Ag NPs and Se NPs. In antibiofilm assay, 5 µg mL- 1 Ag-Se NPs inhibited C. albicans with a percentage of 90.88%, E. coli with a percentage of 90.70%, and S. aureus with a percentage of 90.62%. The synthesized NPs can be arranged as follows in decreasing order of antioxidant capacity as an antioxidant result: Ag-Se NPs > Se NPs > Ag NPs. The MB dye degradation in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was confirmed by the decrease in the measured absorbance (at 664 nm) after 20 min of exposure to sunlight.

CONCLUSION

Our study provides insight towards the synthesis of bimetallic NPs through green methodologies, to develop synergistic combinatorial antimicrobials with possible applications in the treatment of infectious diseases caused by clinically and industrial relevant drug-resistant strains.

Exploring the Antimicrobial, Anticancer, and Apoptosis Inducing Ability of Biofabricated Silver Nanoparticles Using Lagerstroemia speciosa Flower Buds against the Human Osteosarcoma (MG-63) Cell Line via Flow Cytometry

Biosynthesized nano-composites, such as silver nanoparticles (AgNPs), can be engineered to function as smart nano-biomedicine platforms for the detection and management of diverse ailments, such as infectious diseases and cancer. This study determined the eco-friendly fabrication of silver nanoparticles using Lagerstroemia speciosa (L.) Pers. flower buds and their efficacy against antimicrobial and anticancer activities. The UV-Visible spectrum was found at 413 nm showing a typical resonance spectrum for L. speciosa flower bud extract-assisted silver nanoparticles (Ls-AgNPs). Fourier transform infrared analysis revealed the presence of amines, halides, and halogen compounds, which were involved in the reduction and capping agent of AgNP formation. X-ray diffraction analysis revealed the face-centered cubic crystals of NPs. Energy dispersive X-ray verified the weight of 39.80% of silver (Ag), TEM analysis revealed the particles were spherical with a 10.27 to 62.5 nm range, and dynamic light scattering recorded the average particle size around 58.5 nm. Zeta potential showed a significant value at -39.4 mV, and finally, thermo-gravimetric analysis reported higher thermal stability of Ls-AgNPs. Further, the obtained Ls-AgNPs displayed good antimicrobial activity against clinical pathogens. In addition, a dose-dependent decrease in the anticancer activity by MTT assay on the osteosarcoma (MG-63) cell line showed a decrease in the cell viability with increasing in the concentration of Ls-AgNPs with an IC₅₀ value of 37.57 µg/mL. Subsequently, an apoptotic/necrosis study was conducted with the help of Annexin-V/PI assay, and the results indicated a significant rise in early and late apoptosis cell populations. Therefore, green synthesized Ls-AgNPs were found to have potent antimicrobial and anticancer properties making them fascinating choices for future bio-medical implementations.

Metal-Based Nanoparticles in Food Packaging and Coating Technologies: A Review

Food security has continued to be a topic of interest in our world due to the increasing demand for food. Many technologies have been adopted to enhance food supply and narrow the demand gap. Thus, the attempt to use nanotechnology to improve food security and increase supply has emerged due to the severe shortcomings of conventional technologies, which have made them insufficient to cater to the continuous demand for food products. Hence, nanoparticles have been identified to play a major role in areas involving food production, protection, and shelf-life extensions. Specifically, metal-based nanoparticles have been singled out to play an important role in manufacturing materials with outstanding properties, which can help increase the shelf-life of different food materials. The physicochemical and biological properties of metal-based nanoparticles, such as the large surface area and antimicrobial properties, have made them suitable and adequately useful, not just as a regular packaging material but as a functional material upon incorporation into biopolymer matrices. These, amongst many other reasons, have led to their wide synthesis and applications, even though their methods of preparation and risk evaluation remain a topic of concern. This review, therefore, briefly explores the available synthetic methods, physicochemical properties, roles, and biological properties of metal-based nanoparticles for food packaging. Furthermore, the associated limitations, alongside quality and safety considerations, of these materials were summarily explored. Although this area of research continues to garner attention, this review showed that metal-based nanoparticles possess great potential to be a leading material for food packaging if the problem of migration and toxicity can be effectively modulated.

Novel silver-morphine-functionalized polypropylene (AgPP-mrp) nanocomposite for the degradation of dye removal by multivariate optimization approach

As a novel adsorbent, an opioid silver-morphine-functionalized polypropylene was synthesized through a one-pot reaction at room temperature and successfully used for the simple one-pot photocatalytic degradation catalyst of methyl orange removal from wastewater. UV spectral analysis reveals a special reference to the excitation of surface plasmon resonance as the main characteristic of the polymer-Ag nanocomposite in toluene solution peak at 420 nm in AgPP-mrp catalyst. The 1H NMR spectrum showed no sign of Ag NP peaks revealing small size distribution in the channels of morphine-functionalized polypropylene polymer. The morphology of silver nanoparticle-doped polymer through scanning electron microscopy (SEM-EDX) reveals PP-mrp with continuous matrix and Ag NPs (0.87 wt%). Furthermore, photocatalytic degradation of methyl orange was investigated on AgPP-mrp catalyst spectrophotometrically under solar irradiation in waste effluent, demonstrating high degradation efficiency. According to experimental findings, silver nanoparticles (AgPP-mrp) achieved high degradation capacities of 139 mg/g equivalent to 97.4% of photodegradation in a little period of time (35 min), as associated with previously stated materials and follow pseudo-second-order kinetic degradation tail of a high regression coefficient (R2 = 0.992). The suggested techniques offer a linear reaction for MO over the pH range of 1.5 to 5 and a degradation temperature of 25 to 60 °C. Central composite design and response surface methodology statistics recommend pH of the reaction medium and time as important variables for methyl orange degradation on AgPP-mrp photocatalytic. AgPP-mrp on the photocatalytic phenomenon based on heterojunction catalytic design producing electron holes (e-), as well as superoxides for the successful degradation of methyl orange.

Synthesis and Characterization of ZnO Nanoparticles Derived from Biomass (Sisymbrium Irio) and Assessment of Potential Anticancer Activity

Cancer treatment development is hampered by chemotherapy side effects, drug resistance, and tumor metastasis, giving cancer patients a gloomy prognosis. Nanoparticles (NPs) have developed as a promising medicinal delivery technique in the last 10 years. The zinc oxide (ZnO) NPs can precisely and captivatingly promote the apoptosis of cancer cells in cancer treatment. There is also an urgent need to discover novel anti-cancer therapies, and current research suggests that ZnO NPs hold significant promise. ZnO NPs have been tested for phytochemical screening and in vitro chemical efficiency. The green synthesis method was employed for the preparation of ZnO NPs from Sisymbrium irio (L.) (Khakshi). An alcoholic and aqueous extract of S. irio was prepared using the Soxhlet method. Various chemical compounds were revealed in the methanolic extract through qualitative analysis. The results of quantitative analysis showed that the total phenolic content has the highest amount (42.7861 mgGAE/g), while the resultant amounts of (5.72175 mgAAE/g) and (15.20725 mgAAE/g) were obtained in total flavonoid content and antioxidant property, respectively. ZnO NPs were prepared using a 1:1 ratio. The synthesized ZnO NPs were identified to have a hexagonal wurtzite crystal arrangement. The nanomaterial was characterized by scanning electron microscopy, transmission electron microscopy, and UV-visible spectroscopy. The ZnO-NPs' morphology exhibited an absorbance at 350-380 nm. Furthermore, different fractions were prepared and assessed for anticancer activity. As a result of this anticancer activity, all fractions exhibited cytotoxic activity against both BHK and HepG2 human cancer cell lines. The methanol fraction showed the highest activity of 90% (IC50 = 0.4769 mg/mL), followed by the hexane fraction that showed 86.72%, ethyl acetate showed 85%, and chloroform fraction showed 84% against BHK and HepG2 cell lines. These findings suggested that synthesized ZnO-NPs have anticancer potential.

Biosynthesis of Gold and Silver Nanoparticles Using Phytochemical Compounds

Gold and silver nanoparticles are nanoparticles that have been widely used in various fields and have shown good benefits. The method of nanoparticle biosynthesis utilizing plant extracts, also known as green synthesis, has become a promising method considering the advantages it has compared to other synthesis methods. This review aims to give an overview of the phytochemical compounds in plants used in the synthesis of gold and silver nanoparticles, the nanoparticle properties produced using plant extracts based on the concentration and structure of phytochemical compounds, and their applications. Phytochemical compounds play an important role as reducing agents and stabilizers in the stages of the synthesis of nanoparticles. Polyphenol compounds, reducing sugars, and proteins are the main phytochemical compounds that are responsible for the synthesis of gold and silver nanoparticles. The concentration of phytochemical compounds affects the physical properties, stability, and activity of nanoparticles. This is important to know to be able to overcome limitations in controlling the physical properties of the nanoparticles produced. Based on structure, the phytochemical compounds that have ortho-substituted hydroxyl result in a smaller size and well-defined shape, which can lead to greater activity and stability. Furthermore, the optimal condition of the biosynthesis process is required to gain a successful reaction that includes setting the metal ion concentration, temperature, reaction time, and pH.

Recent advances of Au@Ag core-shell SERS-based biosensors

The methodological advancements in surface-enhanced Raman scattering (SERS) technique with nanoscale materials based on noble metals, Au, Ag, and their bimetallic alloy Au-Ag, has enabled the highly efficient sensing of chemical and biological molecules at very low concentration values. By employing the innovative various type of Au, Ag nanoparticles and especially, high efficiency Au@Ag alloy nanomaterials as substrate in SERS based biosensors have revolutionized the detection of biological components including; proteins, antigens antibodies complex, circulating tumor cells, DNA, and RNA (miRNA), etc. This review is about SERS-based Au/Ag bimetallic biosensors and their Raman enhanced activity by focusing on different factors related to them. The emphasis of this research is to describe the recent developments in this field and conceptual advancements behind them. Furthermore, in this article we apex the understanding of impact by variation in basic features like effects of size, shape varying lengths, thickness of core-shell and their influence of large-scale magnitude and morphology. Moreover, the detailed information about recent biological applications based on these core-shell noble metals, importantly detection of receptor binding domain (RBD) protein of COVID-19 is provided.

Bio-Fabrication of Trimetallic Nanoparticles and Their Applications

Nanoparticles are materials whose size is less than 100 nm. Because of their distinctive physical and chemical characteristics, nanoparticles have drawn considerable interest in a variety of fields. Biosynthesis of nanoparticles is a green and environmentally friendly technology, which requires fewer chemical reagents, precursors, and catalysts. There are various types of nanomaterials, out of which trimetallic nanoparticles are receiving considerable interest in recent years. Trimetallic nanoparticles possess unique catalytic, biomedical, antimicrobial, active food packaging, and sensing applications as compared to monometallic or bimetallic nanoparticles. Trimetallic nanoparticles are currently synthesized by various methods such as chemical reduction, microwave-assisted, thermal, precipitation, and so on. However, most of these chemical and physical methods are expensive and toxic to the environment. Biological synthesis is one of the promising methods, which includes the use of bacteria, plants, fungi, algae, waste biomass, etc., as reducing agents. Secondary metabolites present in the biological agents act as capping and reducing agents. Green trimetallic nanoparticles can be used for different applications such as anticancer, antibacterial, antifungal, catalytic activity, etc. This review provides an overview of the synthesis of trimetallic nanoparticles using biological agents, and their applications in different areas such as anticancer, antimicrobial activity, drug delivery, catalytic activity, etc. Finally, current challenges, future prospects, and conclusions are highlighted.

Antibiofilm and cytotoxic potential of extracellular biosynthesized gold nanoparticles using actinobacteria Amycolatopsis sp. KMN

This study intends to biosynthesize gold nanoparticles (AuNPs) using Amycolatopsis sp. KMN and to investigate its potential antibiofilm, cytotoxic and antioxidant activities. The physicochemical characterization of biosynthesize AuNPs was identified by UV-Visible, energy-dispersive X-ray, and Fourier transform infrared spectroscopy, as well as high-resolution transmission electron microscopy, X-ray diffraction, zeta potential, and dynamic light scattering methods. Crystal violet assay and scanning electron microscopy showed that the AuNPs with a particle size of 44.4 nm have a strong antibiofilm activity (at 750 µg/ml concentration) against bacteria strains viz Staphylococcus aureus ATCC 29213, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853. The result also demonstrated strong cytotoxic activity against two cell lines, MCF-7 and HT-29. The MTT test result displayed that over a period of 48 hr, the IC₅₀ of AuNPs was 600 and 300 µg/ml for MCF-7 and HT-29 cell lines, respectively. The IC₅₀ of AuNPs against DPPH was 46.87 µg/ml. This is the first report that examines Amycolatopsis sp. strain KMN-mediated synthesis of AuNPs is rapid and in situ with antibiofilm and cytotoxicity activities. Moreover, it has the potential for an effective antibiofilm and cytotoxic activity that could be used in future therapeutic applications.

Comparative Study of Antimicrobial Activity of Silver, Gold, and Silver/Gold Bimetallic Nanoparticles Synthesized by Green Approach

Nanotechnology is one of the most recent technologies. It is uncertain whether the production of small-size nanoparticles (NPs) can be achieved through a simple, straightforward, and medicinally active phytochemical route. The present study aimed to develop an easy and justifiable method for the synthesis of Ag, Au, and their Ag/Au bimetallic NPs (BNPs) by using Hippeastrum hybridum (HH) extract, and then to investigate the effects of Ag, Au, and their Ag/Au BNPs as antimicrobial and phytotoxic agents. Ag, Au, and their Ag/Au BNPs were characterized by UV-visible spectroscopy, FT-IR spectroscopy, XRD, EDX, and SEM analysis. XRD analysis conferring to the face of face-centered cubic crystal structure with an average size of 13.3, 10.72, and 8.34 nm of Ag, Au, and Ag/Au BNPs, respectively. SEM showed that Ag, Au, and Ag/Au BNPs had spherical morphologies, with calculated nano measurements of 40, 30, and 20 nm, respectively. The EDX analysis confirmed the composition of elemental Ag signal of the HH-AgNPs with 22.75%, Au signal of the HH-AuNPs with 48.08%, Ag signal with 12%, and Au signal with 38.26% of the Ag/Au BNPs. The Ag/Au BNPs showed an excellent antimicrobial efficacy against Gram-positive Staphylococcus aureus, Actinomycetes meriye, Bacillus cereus, Streptococcus pyogenes, Methicillin-resistant Staphylococcus aureus, Micrococcus luteus, Streptococcus pneumonia, and Gram-negative Klebsiella pneumonia, Escherichia coli, and Serratia marcescens bacterial strains, as well as against three fungal strains (Aspergillus niger, Aspergillus fumigatus, and Aspergillus flavus) compared to HH extract, HH-AgNPs, and HH-AuNPs. However, further investigations are recommended to be able to minimize potential risks of application.

Cefotaxime incorporated bimetallic silver-selenium nanoparticles: promising antimicrobial synergism, antibiofilm activity, and bacterial membrane leakage reaction mechanism

In this research, we reported for the first time the simple incorporation of antibiotic cefotaxime (CFM) with the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs by gamma rays, as a promising cost-effective, and eco-friendly method. The synthesized nanocomposites were characterized by UV-Vis. spectroscopy, XRD, EDX, HR-TEM, SEM/mapping, and EDX studies. The antimicrobial synergistic potential was investigated after CFM drug incorporation. Antibiofilm activity, growth curve assay, and effect of UV illumination were examined against some pathogenic microbes. The antibacterial reaction mechanism was evaluated by protein leakage assay and SEM imaging. HRTEM imaging confirmed the spherical shape and an average diameter of 10.95, 20.54, and 12.69 nm for Ag NPs, Se NPs, and Ag-Se NPs, respectively. Ag NPs-CFM, Se NPs-CFM, and Ag-Se NPs-CFM possessed antimicrobial activity against Staphylococcus aureus (40, 42, and 43 mm ZOI, respectively), Escherichia coli (33, 35, and 34 mm ZOI, respectively) and Candida albicans (25, 22, and 23 mm ZOI, respectively). CFM-incorporated Ag-Se NPs were able to inhibit biofilm formation of S. aureus (96.09%), E. coli (98.32%), and C. albicans (95.93%). Based on the promising results, the synthesized nanocomposites showed superior antimicrobial potential at low concentrations and continued-phase durability; they may find use in pharmaceutical, and biomedical applications.

Green synthesis of biocompatible core-shell (Au-Ag) and hybrid (Au-ZnO and Ag-ZnO) bimetallic nanoparticles and evaluation of their potential antibacterial, antidiabetic, antiglycation and anticancer activities

The fabrication of bimetallic nanoparticles (BNPs) using plant extracts is applauded since it is an environmentally and biologically safe method. In this research, Manilkara zapota leaf extract was utilized to bioreduce metal ions for the production of therapeutically important core-shell Au-Ag and hybrid (Au-ZnO and Ag-ZnO) BNPs. The phytochemical profiling of the leaf extract in terms of total phenolic and flavonoid content is attributed to its high free radical scavenging activity. FTIR data also supported the involvement of these phytochemicals (polyphenols, flavonoids, aromatic compounds and alkynes) in the synthesis of BNPs. Whereas, TEM and XRD showed the formation of small sized (16.57 nm) spherical shaped core-shell Au-Ag BNPs and ZnO nano-needles with spherical AuNPs (48.32 nm) and ZnO nano-rods with spherical AgNP (19.64 nm) hybrid BNPs. The biological activities of BNPs reinforced the fact that they show enhanced therapeutic efficacy as compared to their monometallic components. All BNPs showed comparable antibacterial activities as compared to standard tetracycline discs. While small sized Au-Ag BNPs were most effective in killing human hepato-cellular carcinoma cells (HepG2) in terms of lowest cell viability, highest intracellular ROS/RNS production, loss of mitochondrial membrane potential, induction of caspase-3 gene expression and enhanced caspase-3/7 activity. BNPs also effectively inhibited advanced glycation end products and carbohydrate digesting enzymes which can be used as a nano-medicine for aging and diabetes. The most important finding was the permissible biocompatibility of these BNPs towards brine shrimp larvae and human RBCs, which suggests their environmental and biological safety. This research study gives us insight into the promise of using a green route to synthesize commercially important BNPs with enhanced therapeutic efficacy as compared to conventional treatment options.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Bacterial driver-passenger model in biofilms: a new mechanism in the development of colorectal cancer

Colorectal cancer (CRC) is a heterogeneous disease of the intestinal epithelium and ranks the third largest diagnosed malignancy in the world. Many studies have shown that the high risk of CRC is believed to be related to the formation of biofilms. To prove causation, it will be significant to decipher which specific bacteria in biofilms initiate and maintain CRC and fully describe their underlying mechanisms. Here we introduce a bacterial driver-passenger model. This model added a novel and compelling angle to the role of microorganisms, putting more emphasis on the transformation of bacterial composition in biofilms which play different roles in the development of CRC. In this model, bacterial drivers can initiate the formation of CRC through genotoxicity, while bacterial passengers maintain the CRC process through metabolites. On the basis of these pathogens, we further turned our attention to strategies that can inhibit and eradicate these pathogenic biofilms, with the aim of finding new ways to hinder colorectal carcinogenesis.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

Plausible Mechanistic Insights in Biofilm Eradication Potential against Candida spp. Using In Situ-Synthesized Tyrosol-Functionalized Chitosan Gold Nanoparticles as a Versatile Antifouling Coating on Implant Surfaces

In the present study, tyrosol-functionalized chitosan gold nanoparticles (Chi-TY-AuNPs) were prepared as an alternative treatment strategy to combat fungal infections. Various biophysical techniques were used to characterize the synthesized Chi-TY-AuNPs. The antifungal and antibiofilm activities of Chi-TY-AuNPs were evaluated against Candida albicans and C. glabrata, and efforts have been made to elucidate the possible mechanism of action. Chi-TY-AuNPs showed a high fungicidal effect against both sessile and planktonic cells of Candida spp. Additionally, Chi-TY-AuNPs completely eradicated (100%) the mature biofilms of both the Candida spp. FESEM analysis highlighted the morphological alterations in Chi-TY-AuNP-treated Candida biofilm cells. The effect of Chi-TY-AuNPs on the ECM components showed significant reduction in protein content in the C. glabrata biofilm and substantial decrease in extracellular DNA content of both the Candida spp. ROS generation analysis using DCFDA-PI staining showed high ROS levels in both the Candida spp., whereas pronounced ROS production was observed in the Chi-TY-AuNP-treated C. glabrata biofilm. Biochemical analysis revealed decreased ergosterol content in Chi-TY-AuNP-treated C. glabrata cells, while inconsequential changes were observed in C. albican s. Furthermore, the transcriptional expression of selected genes (ergosterol biosynthesis, efflux, sterol importer, and glucan biogenesis) was reduced in C. glabrata in response to Chi-TY-AuNPs except ERG11 and CDR1. Conclusively, the result showed the biofilm inhibition and biofilm eradication efficacy of Chi-TY-AuNPs in both the Candida spp. Findings of the present study manifest Chi-TY-AuNPs as a potential therapeutic solution to Candida biofilm-related chronic infections and overcome biofilm antifungal resistance.

Inactivation of fungal spores from clinical environment by silver bio-nanoparticles; optimization, artificial neural network model and mechanism

The present study aimed to assess the efficiency of silver bio-nanoparticles (Ag-NPs) in inactivating of the Aspergillus fumigatus, A. parasiticus and A. flavus var. columnaris and A. aculeatus spores. The AgNPs were synthesized in secondary metabolic products of Penicillium pedernalens 604 EAN. The inactivation process was optimized by response surface methodology (RSM) as a function of Ag NPs volume (1-10 μL/mL); time (10-120 min); pH (5-8); initial fungal concentrations (log₁₀) (3-6). The artificial neural network (ANN) model was used to understand the behavior of spores for the factors affecting inactivation process. The best conditions to achieved SAL 10^-6 of the fungal spores were recorded with 3.46 μl/mL of AgNPs, after 120 min at pH 5 and with 6 log of initial fungal spore concentrations, at which 5.99 vs. 6.09 (SAL 10^-6) log reduction was recorded in actual and predicted results respectively with coefficient of 87.00%. The ANN revealed that the timehas major contribution in the inactivation process compare to Ag NPs volume. The fungal spores were totally inactivated (SAL 10^-6, 6 log reduction with 99.9999%) after 110 min of the inactivation process, 10 min more was required to insure the irreversible inactivation of the fungal spores. The absence of protease and cellulase enzymes production confirm the total inactivation of the fungal spores. FESEM analysis revealed that the AgNPs which penetrated the fungal spores leading to damage and deform the fungal spore morphology. The AFM analysis confirmed the total spore surface damage. The bands in the range of the Raman spectroscopy from 1300 to 1600 cm^-1 in the inactivated spores indicate the presence of CH_3, CH₂ and the deformation of lipids released outside the spore cytoplasm. These finding indicate that the AgNPs has high potential as a green alternative inactivation process for the airborne fungal spores.

Composition-Dependent Cytotoxic and Antibacterial Activity of Biopolymer-Capped Ag/Au Bimetallic Nanoparticles against Melanoma and Multidrug-Resistant Pathogens

Nanostructured silver (Ag) and gold (Au) are widely known to be potent biocidal and cytotoxic agents as well as biocompatible nanomaterials. It has been recently reported that combining both metals in a specific chemical composition causes a significant enhancement in their antibacterial activity against antibiotic-resistant bacterial strains, as well as in their anticancer effects, while preserving cytocompatibility properties. In this work, Ag/Au bimetallic nanoparticles over a complete atomic chemical composition range were prepared at 10 at% through a green, highly reproducible, and simple approach using starch as a unique reducing and capping agent. The noble metal nanosystems were thoroughly characterized by different analytical techniques, including UV-visible and FT-IR spectroscopies, XRD, TEM/EDS, XPS and ICP-MS. Moreover, absorption spectra simulations for representative colloidal Ag/Au-NP samples were conducted using FDTD modelling. The antibacterial properties of the bimetallic nanoparticles were determined against multidrug-resistant Escherichia coli and methicillin-resistant Staphylococcus aureus, showing a clear dose-dependent inhibition even at the lowest concentration tested (5 µg/mL). Cytocompatibility assays showed a medium range of toxicity at low and intermediate concentrations (5 and 10 µg/mL), while triggering an anticancer behavior, even at the lowest concentration tested, in a process involving reactive oxygen species production per the nanoparticle Au:Ag ratio. In this manner, this study provides promising evidence that the presently fabricated Ag/Au-NPs should be further studied for a wide range of antibacterial and anticancer applications.

Plant-Based Synthesis of Gold Nanoparticles and Theranostic Applications: A Review

Bionanotechnology is a branch of science that has revolutionized modern science and technology. Nanomaterials, especially noble metals, have attracted researchers due to their size and application in different branches of sciences that benefit humanity. Metal nanoparticles can be synthesized using green methods, which are good for the environment, economically viable, and facilitate synthesis. Due to their size and form, gold nanoparticles have become significant. Plant materials are of particular interest in the synthesis and manufacture of theranostic gold nanoparticles (NPs), which have been generated using various materials. On the other hand, chemically produced nanoparticles have several drawbacks in terms of cost, toxicity, and effectiveness. A plant-mediated integration of metallic nanoparticles has been developed in the field of nanotechnology to overcome the drawbacks of traditional synthesis, such as physical and synthetic strategies. Nanomaterials′ tunable features make them sophisticated tools in the biomedical platform, especially for developing new diagnostics and therapeutics for malignancy, neurodegenerative, and other chronic disorders. Therefore, this review outlines the theranostic approach, the different plant materials utilized in theranostic applications, and future directions based on current breakthroughs in these fields.

Rowan Berries: A Potential Source for Green Synthesis of Extremely Monodisperse Gold and Silver Nanoparticles and Their Antimicrobial Property

Rowanberries (Sorbus aucuparia) are omnipresent in Europe. The medicinal importance of rowanberries is widely known and corresponds to the active ingredients present in the fruits, mainly polyphenols, carotenoids, and organic acids. In the current study, we explored rowanberries for the reduction of gold and silver salts into nanoparticles. Rowanberries-mediated gold nanoparticles (RB-AuNPs) formed within 5 s at room temperature, and silver nanoparticles (RB-AgNPs) formed in 20 min at 90 °C. The produced nanoparticles were thoroughly characterized by UV-Vis spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), dynamic light scattering (DLS), single-particle inductively coupled plasma–mass spectrometry (sp-ICP-MS), thermogravimetric analysis (TGA), Fourier transform-infrared spectroscopy (FT-IR) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF). The characterization confirmed that the nanoparticles are highly monodisperse, spherical, stable over long periods, and exhibit a high negative zeta potential values. The produced RB-AuNPs and RB-AgNPs were 90–100 nm and 20–30 nm in size with a thick biological corona layer surrounding them, providing extreme stability but lowering the antimicrobial activity. The antimicrobials study of RB-AgNPs revealed that the nanoparticles have antimicrobial potential with an MBC value of 100 µg/mL against P. aeruginosa and 200 µg/mL against E. coli.

A Review on Plant-Mediated Synthesis of Bimetallic Nanoparticles, Characterisation and Their Biological Applications

The study of bimetallic nanoparticles (BNPs) has constantly been expanding, especially in the last decade. The biosynthesis of BNPs mediated by natural extracts is simple, low-cost, and safe for the environment. Plant extracts contain phenolic compounds that act as reducing agents (flavonoids, terpenoids, tannins, and alkaloids) and stabilising ligands moieties (carbonyl, carboxyl, and amine groups), useful in the green synthesis of nanoparticles (NPs), and are free of toxic by-products. Noble bimetallic NPs (containing silver, gold, platinum, and palladium) have potential for biomedical applications due to their safety, stability in the biological environment, and low toxicity. They substantially impact human health (applications in medicine and pharmacy) due to the proven biological effects (catalytic, antioxidant, antibacterial, antidiabetic, antitumor, hepatoprotective, and regenerative activity). To the best of our knowledge, there are no review papers in the literature on the synthesis and characterisation of plant-mediated BNPs and their pharmacological potential. Thus, an effort has been made to provide a clear perspective on the synthesis of BNPs and the antioxidant, antibacterial, anticancer, antidiabetic, and size/shape-dependent applications of BNPs. Furthermore, we discussed the factors that influence BNPs biosyntheses such as pH, temperature, time, metal ion concentration, and plant extract.

Antibacterial and antibiofilm efficacy of Ag NPs, Ni NPs and Al2O3 NPs singly and in combination against multidrug-resistant Klebsiella pneumoniae isolates

BACKGROUND

Although traditional antibiotic therapy provided an effective approach to combat pathogenic bacteria, the long-term and widespread use of antibiotic results in the evolution of multidrug-resistant bacteria. Recent progress in nanotechnology offers an alternative opportunity to discover and develop novel antibacterial agents.

METHODS

A total of 51 K. pneumoniae strains were collected from several specimens of hospitalized patients and identified by two parallel methods (biochemical tests and Vitek-2 system). The antibiotic sensitivity of isolates was evaluated by disk diffusion antibiogram and Vitek-2 system. The biofilms formation ability of antibiotic-resistant strains was examined by microtiter plate and tube methods based on crystal violet staining. The molecular technique was used to determine key genes responsible for biofilms formation of clinical isolates. The antibacterial and antibiofilm activities of Ag NPs, Ni NPs, Al₂O₃ NPs singly (NPs) and in combination (cNPs) were investigated against selected strains using standard methods. Moreover, the cytotoxicity of NPs was evaluated on mouse neural crest-derived (Neuro-2A) cell line.

RESULTS

The results of bacterial studies revealed that more than 80 % of the isolates were resistant to commonly used antibiotics and about 95 % of them were able to form biofilms. Moreover, the presence of fimA and mrkA genes were determined in all biofilm-producing strains. The results of antibacterial and antibiofilm activities of NPs and cNPs demonstrated the lower MIC and MBEC values for Al₂O₃ NPs singly as well as for Ag/Ni cNPs and Ag/Al₂O₃ cNPs in combination, respectively. Overall, the inhibitory effects of cNPs were superior to NPs against all strains. Furthermore, the results of the checkerboard assays showed that Ag NPs act synergistically with two other NPs against multidrug-resistant Klebsiella pneumoniae (MDR-K. pneumoniae) isolates. The in vitro cytotoxicity assay revealed no significant toxicity of NPs against Neuro-2A cells.

CONCLUSION

In the present study, the combination of Ag NPs, Ni NPs, and Al₂O₃ NPs were used against MDR-K. pneumoniae strains and antibacterial and antibiofilm activities were observed for Ag/Ni cNPs and Ag/Al₂O₃ cNPs.

Prospective Application of Nanoparticles Green Synthesized Using Medicinal Plant Extracts as Novel Nanomedicines

The use of medicinal plants in green synthesis of metal nanoparticles is increasing day by day. A simple search for the keywords "green synthesis" and "nanoparticles" yields more than 33,000 articles in Scopus. As of August 10, 2021, more than 4000 articles have been published in 2021 alone. Besides demonstrating the ease and environmental-friendly route of synthesizing nanomaterials, many studies report the superior pharmacological properties of green synthesized nanoparticles compared to those synthesized by other methods. This is probably due to the fact that bioactive molecules are entrapped on the surface of these nanoparticles. On the other hand, recent studies have confirmed the nano-dimension and biocompatibility of metal ash (Bhasma) preparations, which are commonly macerated with biological products and administered for the treatment of various diseases in Indian medicine since ancient times. This perspective article argues for the prospective medical application of green nanoparticles in the light of Bhasma.

High Stability Au NPs: From Design to Application in Nanomedicine

In recent years, Au-based nanomaterials are widely used in nanomedicine and biosensors due to their excellent physical and chemical properties. However, these applications require Au NPs to have excellent stability in different environments, such as extreme pH, high temperature, high concentration ions, and various biomatrix. To meet the requirement of multiple applications, many synthetic substances and natural products are used to prepare highly stable Au NPs. Because of this, we aim at offering an update comprehensive summary of preparation high stability Au NPs. In addition, we discuss its application in nanomedicine. The contents of this review are based on a balanced combination of our studies and selected research studies done by worldwide academic groups. First, we address some critical methods for preparing highly stable Au NPs using polymers, including heterocyclic substances, polyethylene glycols, amines, and thiol, then pay attention to natural product progress Au NPs. Then, we sum up the stability of various Au NPs in different stored times, ions solution, pH, temperature, and biomatrix. Finally, the application of Au NPs in nanomedicine, such as drug delivery, bioimaging, photothermal therapy (PTT), clinical diagnosis, nanozyme, and radiotherapy (RT), was addressed concentratedly.

Nanoceutical Fabric Prevents COVID-19 Spread through Expelled Respiratory Droplets: A Combined Computational, Spectroscopic, and Antimicrobial Study

Centers for Disease Control and Prevention (CDC) warns the use of one-way valves or vents in face masks for potential threat of spreading COVID-19 through expelled respiratory droplets. Here, we have developed a nanoceutical cotton fabric duly sensitized with non-toxic zinc oxide nanomaterial for potential use as a membrane filter in the one-way valve for the ease of breathing without the threat of COVID-19 spreading. A detailed computational study revealed that zinc oxide nanoflowers (ZnO NFs) with almost two-dimensional petals trap SARS-CoV-2 spike proteins, responsible to attach to ACE-2 receptors in human lung epithelial cells. The study also confirmed significant denaturation of the spike proteins on the ZnO surface, revealing removal of the virus upon efficient trapping. Following the computational study, we have synthesized ZnO NF on a cotton matrix using a hydrothermal-assisted strategy. Electron-microscopic, steady-state, and picosecond-resolved spectroscopic studies confirm attachment of ZnO NF to the cotton (i.e., cellulose) matrix at the atomic level to develop the nanoceutical fabric. A detailed antimicrobial assay using Pseudomonas aeruginosa bacteria (model SARS-CoV-2 mimic) reveals excellent antimicrobial efficiency of the developed nanoceutical fabric. To our understanding, the nanoceutical fabric used in the one-way valve of a face mask would be the choice to assure breathing comfort along with source control of COVID-19 infection. The developed nanosensitized cloth can also be used as an antibacterial/anti CoV-2 washable dress material in general.

Nanoceutical Fabric Prevents COVID-19 Spread through Expelled Respiratory Droplets: A Combined Computational, Spectroscopic, and Antimicrobial Study

Centers for Disease Control and Prevention (CDC) warns the use of one-way valves or vents in face masks for potential threat of spreading COVID-19 through expelled respiratory droplets. Here, we have developed a nanoceutical cotton fabric duly sensitized with non-toxic zinc oxide nanomaterial for potential use as a membrane filter in the one-way valve for the ease of breathing without the threat of COVID-19 spreading. A detailed computational study revealed that zinc oxide nanoflowers (ZnO NFs) with almost two-dimensional petals trap SARS-CoV-2 spike proteins, responsible to attach to ACE-2 receptors in human lung epithelial cells. The study also confirmed significant denaturation of the spike proteins on the ZnO surface, revealing removal of the virus upon efficient trapping. Following the computational study, we have synthesized ZnO NF on a cotton matrix using a hydrothermal-assisted strategy. Electron-microscopic, steady-state, and picosecond-resolved spectroscopic studies confirm attachment of ZnO NF to the cotton (i.e., cellulose) matrix at the atomic level to develop the nanoceutical fabric. A detailed antimicrobial assay using Pseudomonas aeruginosa bacteria (model SARS-CoV-2 mimic) reveals excellent antimicrobial efficiency of the developed nanoceutical fabric. To our understanding, the nanoceutical fabric used in the one-way valve of a face mask would be the choice to assure breathing comfort along with source control of COVID-19 infection. The developed nanosensitized cloth can also be used as an antibacterial/anti CoV-2 washable dress material in general.

Antimicrobial biodegradable film based on corn starch/Satureja khuzestanicaessential oil/Ag-TiO2nanocomposites

Biosynthesis of nanoparticles (NPs) using plant extract is an eco-friendly method, in which natural materials are used and is a simple, non-toxic, and environmentally friendly green synthesis. In this study, corn starch (CS) film containingSatureja khuzestanicaessential oil (SEO) and Ag-TiO₂nanocomposites (size: nearly 30-60 nm) were prepared and its antimicrobial, morphological, physical, and mechanical characteristics were investigated. Ag-TiO₂nanocomposites with different molar percentages were synthesized byS. khuzestanicaextract and based on the best antibacterial results against Gram-negative bacteria (Escherichia coliATCC 25922 andSalmonella typhimuriumATCC 14028) and Gram-positive bacteria (Staphylococcus aureusATCC 25923), were chosen to prepare the films. Four types of biodegradable films were provided: simple CS film, the film incorporated with SEO (essence film), the film incorporated with Ag-TiO₂nanocomposites (nanofilm), and nano/essence film. The scanning electron microscopy (SEM) was employed for investigating the morphology of the films. The combined energy-dispersive x-ray spectroscopy with SEM was applied to analyze the near-surface elements. Physical characteristics of the films containing water vapor permeability (%) and their moisture content, mechanical tests, and antibacterial properties were examined. Antimicrobial evaluation of the films revealed a 3-4 log and 6-7 log (CFU ml^-1) reduction inS. aureusandE. colispecies respectively, compared to the control group. The bio-polymer film incorporated with extracted essential oil ofS. khuzestanicaand Ag-TiO₂nanocomposites are effective to package foods and can delay chemical, physical, and microbial spoilage.