Potentiometric multi-syringe flow injection system for determination of exchangeable potassium in soils with in-line extraction

Single flow-based system for the automatic multiparametric nutrients (NPK & Fe) assessment in soil leachates

A multiparametric sequential injection system for the determination of phosphate, nitrite, nitrate, potassium, and iron(III) in a single manifold was developed. The main goal of the proposed method was to develop an efficient tool to assess a number of essential chemical compounds in soils, providing the corresponding information on soil fertility and, additionally, information on possible groundwater contamination. The method was applied for the quantification of the aforementioned parameters in simulated leachates produced in laboratory-scale core columns. The relative standard deviations of ten replicate analyses of a standard were: 6% for phosphate; 2% for nitrite; 2% for nitrate; 5% for potassium; and 6% for iron(III). The limits of detection and quantification were: 2.15 and 7.18 μmol/L for phosphate determination; 0.22 and 0.73 μmol/L for nitrite determination; 3.42 and 8.00 μmol/L for nitrate determination; 39 μmol/L (limit of detection) for potassium determination; and 0.46 and 1.85 μmol/L for iron(III) determination. The sequential injection system was successfully applied for the quantification of multiple soil chemical components (PO43-, NO2-, NO3-, K+, and Fe3+) in soil leachates. The analysis of a sample, involving all the analytes, has a duration of 28 min.

Sequential injection method for bi-parametric determination of iron and manganese in soil leachates

The aim of this work was to develop a sequential injection (SI) method for the determination of the micronutrients iron and manganese, in soil leachates, as a tool to assess potential groundwater contamination. The described sequential injection method was based on the reaction of iron with chelator MRB12, a greener alternative chromogenic reagent, and the reaction of manganese with zincon, within a single manifold. The developed SI method enabled the determination of iron in the range 0.10-1.00 mg L^-1, and manganese in the range 0.25-2.5 mg L^-1 with a limit of detection of 0.08 mg L^-1 for iron and 0.24 mg L^-1 for manganese. The determination of both parameters was made in 6 minutes, in triplicate. The application to monitor laboratory scale soil core columns (LSSCs), as a simulation of the soil leaching process, proved its efficiency to assess potential contamination of ground waters. Iron and manganese contents were effectively analysed in two different scenarios to mimic the leaching process with rainwater and fertilizer.

Determination of potassium, sodium, and total alkalies in portland cement, fly ash, admixtures, and water of concrete by a simple flow injection flame photometric system

A simple flow injection with flame photometric detection has been developed for determination of sodium, potassium, and total alkalies in portland cement, fly ash, admixtures, and water of concrete. A liquid sample or a digest of solid sample was injected into a water carrier stream which flowed to a flame photometer. A change in emission intensity at a selected wavelength was recorded as a peak. An amplifier circuit was fabricated, which helped improve sensitivity of the flame photometer. Calibration graphs in the range of 0.05-1.0 mg L(-1) and 1.0-20.0 mg L(-1) were obtained with a detection limit of 0.02 mg L(-1), for both potassium and sodium determination. Relative standard deviations for 11 replicates of injecting of 10 mg L(-1) potassium and sodium solutions were 1.69 and 1.79%, respectively. Sample throughput of 120 h(-1) was achieved. The proposed method was successfully applied to portland cement, fly ash, admixtures, and water samples validated by the ASTM standard method and certified reference materials of portland cement.