Preconcentration and speciation of thallium by ferrofluid based dispersive solid phase extraction and flame atomic absorption spectrometry

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Thallium (Tl) is a potential toxicity element that poses significant ecological and environmental risks. Recently, a substantial amount of Tl has been released into the environment through natural and human activities, which attracts increasing attention. The determination of this hazardous and trace element is crucial for controlling its pollution. This article summarizes the advancement and progress in optimizing Tl detection techniques, including atomic absorption spectroscopy (AAS), voltammetry, inductively coupled plasma (ICP)-based methods, spectrophotometry, and X-ray-based methods. Additionally, it introduces sampling and pretreatment methods such as diffusive gradients in thin films (DGT), liquid-liquid extraction, solid phase extraction, and cloud point extraction. Among these techniques, ICP-mass spectrometry (MS) is the preferred choice for Tl detection due to its high precision in determining Tl as well as its species and isotopic composition. Meanwhile, some new materials and agents are employed in detection. The application of novel work electrode materials and chromogenic agents is discussed. Emphasis is placed on reducing solvent consumption and utilizing pretreatment techniques such as ultrasound-assisted processes and functionalized magnetic particles. Most detection is performed in aqueous matrices, while X-ray-based methods applied to solid phases are summarized which provide non-destructive analysis. This work improves the understanding of Tl determination technology while serving as a valuable resource for researchers seeking appropriate analytical techniques.

Geochemical distribution and speciation of Tl and other trace metals in upper Beijiang River in South China: Approach of in-situ DGT monitoring

Mining activities frequently result in severe contamination of river water. This study aimed to better understand the spatial distribution characteristics of Tl and other metals (e.g., Al, Cd, Co, Mn, Ni, Zn, Pb, V, As, Mo, and Sb), and to assess their risks to human health. Surface water samples were collected from the upper Beijiang River (South China) via grab sampling and the diffusive gradients in thin-films (DGT) technique. The concentrations of Tl measured by grab sampling and δ-MnO₂-DGT ranged from 0.045 μg L^-1 to 0.231 μg L^-1 and from 0.056 μg L^-1 to 0.131 μg L^-1, respectively. Most of the metals monitored were below the threshold levels allowed by the drinking water standard in China, except for As, Sb, and Mn at specific sampling sites. The concentrations of other metals measured by grab sampling were higher than those measured using the DGT technique because of the differences in speciation during these measurements. The hazard quotient (5.43 × 10^-4-8.0 × 10^-1 for grab sampling and 2.23 × 10^-4-2.8 × 10^-1 for DGT technique) for the monitored trace metals demonstrated minimal health risk to human beings. The pollution status of these toxic metals in the study area was generally acceptable. As was found to be potentially the most harmful metal in the studied area, with hazard quotients at some sampling sites calculated by grab sampling of >1. It has previously been suggested that As is the most important non-carcinogenic contaminant. The combination of grab sampling and the DGT technique provides a comprehensive understanding of trace metals, especially Tl, in terms of potential bioavailability and ecological assessment.

Dispersive micro-solid phase extraction with a magnetic nanocomposite followed by electrothermal atomic absorption measurement for the speciation of thallium

A magnetic dispersive micro-solid phase extraction procedure for the determination of the thallium content in waters is presented. The incorporation in the sample (10 mL) of a small amount of graphene-Fe₃O₄ composite (3.6 mg) in the presence of 10^-4 mol L^-1 Aliquat 336 at pH 2 results in the complete retention of both thallium(I) and thallium(III). After separation with a magnet, the micro-solid phase recovered is treated with 0.05 mL of a 0.1 mol L^-1 sodium ethylenediaminetetracetate solution at pH 9, and the supernatant obtained after application of the magnet is introduced in the electrothermal atomizer of an atomic absorption spectrometer to obtain the signal corresponding to the total thallium content. For speciation, the trivalent form in a second sample aliquot is separated by means of a liquid-liquid extraction stage with chloroform and methyl trioctyl ammonium in the presence of bromide, and the signal corresponding to the monovalent form is obtained, the concentration of thallium(III) being obtained by difference. The enrichment factor is 185, which permits a detection limit as low as 0.01 μg L^-1 of the analyte to be achieved. The relative standard deviation for five measurements at the 0.1 μg L^-1 thallium level is below 5%. The reliability of the procedure is verified by analysing five certified reference samples for which speciation data are also given.

The Use of Ferrofluids in Analytical Sample Preparation: A Review

Ferrofluids (FFs) constitute a type of tunable magnetic material, formed by magnetic nanoparticles suspended in a liquid carrier. The astonishing magnetic properties of these materials and their liquid nature have led to their extended use in different applications, including fields such as magnetochemistry, optics, and biomedicine, among others. Recently, FFs have been incorporated as extractant materials in magnetic-driven analytical sample preparation procedures, thus, permitting the development of different applications. FF-based extraction takes advantage of both the magnetic susceptibility of the nanoparticles and the properties of the liquid carrier, which are responsible for a wide variety of interactions with analytes and ultimately are a key factor in achieving better extraction performance. This review article classifies existing FFs in terms of the solvent used as a carrier (organic solvents, water, ionic liquids, deep eutectic solvents, and supramolecular solvents) while overviewing the most relevant analytical applications in the last decade.

Development of ultrasound-assisted dispersive solid-phase microextraction based on mesoporous carbon coated with silica@iron oxide nanocomposite for preconcentration of Te and Tl in natural water systems

The main objective of this study was to develop an ultrasound-assisted dispersive solid-phase microextraction (UADSPME) method for separation and preconcentration of tellurium (Te) and thallium (Tl) in environmental samples prior to inductively coupled plasma-optical emission spectrometry determination. The MPC@SiO2@Fe3O4 nanocomposite was used as a nanoadsorbent in the UADSPME method. The nanocomposite was prepared using a coprecipitation and sol–gel method, and it was characterized using scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy and X-ray powder diffraction techniques. The Box–Behnken design and response surface methodology were used for the optimization of experimental parameters (such as pH, extraction time and mass of adsorbent) affecting the preconcentration procedure. Under optimized conditions, the limits of detection were 0.05 and 0.02 µg L−1 and the limits of quantification were 0.17 and 0.07 µg L−1 for Te and Tl, respectively. The precision expressed as the relative standard deviation (%RSD) was 2.5% and 2.8% for Te and Tl, respectively. Finally, the developed method was applied for the analysis of Tl and Te in real samples.

A modified method of separating Tl(I) and Tl(III) in aqueous samples using solid phase extraction

In spite of the development of new measurement techniques in recent years, the rapid and accurate speciation of thallium in environmental aqueous samples remains a challenge. In this context, a novel method of solid phase extraction (SPE), involving the anion exchange resin AG1-X8, is proposed to separate Tl(I) and Tl(III). In the presence of diethylene triamine pentacetate acid (DTPA), Tl(III) and Tl(I) can be separated by selective adsorption of Tl(III)-DTPA onto the resin, Tl(III) is then eluted by a solution of HCl with SO₂. The validity of this method was confirmed by assays of standard solutions of Tl(I) and Tl(III). The proposed method is shown to have an outstanding performance even in solutions with a high ratio of Tl(I)/Tl(III), and can be applied to aqueous samples with a high concentration of other electrolytes, which could interfere with the measurement. Portable equipment and reagents make it possible to use the proposed method routinely in the field.

Cu- and S- @SnO2 nanoparticles loaded on activated carbon for efficient ultrasound assisted dispersive µSPE-spectrophotometric detection of quercetin in Nasturtium officinale extract and fruit juice samples: CCD-RSM design

A simple, rapid, and efficient method of dispersive micro solid phase extraction (D-μ-SPE) combined with UV-Vis spectrophotometry via ultrasound-assisted (UA) was applied for the determination and preconcentration of quercetin in extract of watercress (Nasturtium officinale), fruit juice and water samples. The sorbent in this method was synthesized by doping copper and sulfide into the tetragonal structure of SnO₂-nanoparticles (Cu- and S- @SnO₂-NPs) and subsequently loading it on activated carbon (AC). The D-μ-SPE parameters with direct effect on the extraction efficiency of the targeted analyte, such as sample pH, volume of eluent, sorbent mass and ultrasound time were optimized using central composite design method. Under optimized conditions, the calibration graph for quercetin was linear in the range of 20-4000 ng mL^-1; the limit of detection and quantitation were 4.35 and 14.97 ng mL^-1, respectively and the enrichment factor was 95.24. Application of this method to analyze spiked extract, fruit juice and water samples resulted in acceptable recovery values ranging from 90.3% to 97.28% with intra-day and inter-day relative standard deviation values lower than 6.0% in all cases. Among the equilibrium isotherms tested, Langmuir was found to be the best fitted model with maximum sorption capacity of 39.37 mg g^-1, suggesting a homogeneous mode of sorption for quercetin.