A simple method for monitoring of removal of arsenic species from drinking water applying on-site separation with solid phase extraction and detection by atomic absorption and X-ray fluorescence based techniques

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Thallium (Tl) is a potential toxicity element that poses significant ecological and environmental risks. Recently, a substantial amount of Tl has been released into the environment through natural and human activities, which attracts increasing attention. The determination of this hazardous and trace element is crucial for controlling its pollution. This article summarizes the advancement and progress in optimizing Tl detection techniques, including atomic absorption spectroscopy (AAS), voltammetry, inductively coupled plasma (ICP)-based methods, spectrophotometry, and X-ray-based methods. Additionally, it introduces sampling and pretreatment methods such as diffusive gradients in thin films (DGT), liquid-liquid extraction, solid phase extraction, and cloud point extraction. Among these techniques, ICP-mass spectrometry (MS) is the preferred choice for Tl detection due to its high precision in determining Tl as well as its species and isotopic composition. Meanwhile, some new materials and agents are employed in detection. The application of novel work electrode materials and chromogenic agents is discussed. Emphasis is placed on reducing solvent consumption and utilizing pretreatment techniques such as ultrasound-assisted processes and functionalized magnetic particles. Most detection is performed in aqueous matrices, while X-ray-based methods applied to solid phases are summarized which provide non-destructive analysis. This work improves the understanding of Tl determination technology while serving as a valuable resource for researchers seeking appropriate analytical techniques.

Polymeric Materials in Speciation Analysis Based on Solid-Phase Extraction

Speciation analysis is a relevant topic since the (eco)toxicity, bioavailability, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). The reliability of analytical results for chemical species of elements depends mostly on the maintaining of their stability during the sample pretreatment step and on the selectivity of further separation step. Solid-phase extraction (SPE) is a matter of choice as the most suitable and widely used procedure for both enrichment of chemical species of elements and their separation. The features of sorbent material are of great importance to ensure extraction efficiency from one side and selectivity from the other side of the SPE procedure. This review presents an update on the application of polymeric materials in solid-phase extraction used in nonchromatographic methods for speciation analysis.

A critical review of on-site inorganic arsenic screening methods

Approximately 94 to 220 million people worldwide are at risk of drinking well water containing arsenic > 10 µg/L, the WHO guideline value. To identify non-compliant domestic wells, assess health risks and reduce exposure, accurate and rapid on-site inorganic arsenic screening methods are desirable because all domestic wells worldwide need to be tested. Here, the principles, advantages and limitations of commonly used colorimetry, electrochemistry, and biosensing methods are critically reviewed, with the performance compared with laboratory-based benchmark methods. Most commercial kits are based on the classic Gutzeit reaction. Despite being semi-quantitative, the more recent and more expensive products display improved and acceptable accuracy and shorter testing time (∼10 min). Carried out by trained professionals, electrochemical methods are also feasible for on-site analysis, although miniaturization is desirable yet challenging. Biosensing using whole bacterial cells or bio-engineered materials such as aptamers is promising, if incorporated with function specific nanomaterials and biomaterials. Since arsenic is frequently found as arsenite in reducing groundwater and subject to oxidation during sampling, transportation and storage, on-site separation and sample preservation are feasible but the specific methods should be chosen based on sample matrix and tested before use. To eliminate arsenic exposure among hundreds of millions of mostly rural residents worldwide, we call for concerted efforts in research community and regulatory authority to develop accurate, rapid, and affordable tests for on-site screening and monitoring of arsenic in drinking water. Access to affordable testing will benefit people who are socioeconomically disadvantaged.

Determination of As species distribution and variation with time in extracted groundwater samples by on-site species separation method

It is challenging to dependably keep the native distribution of arsenic (As) species before sample analysis in the laboratory. The on-site separation method can avoid sample contamination and species change in the process of sample collection and transportation from field to laboratory. In this study, As species distribution and variation of the extracted groundwater was first analyzed by an on-site species separation method in Jianghan Plain, China. Our study illustrated that: 1) high-As groundwater generally existed under mildly reducing conditions (Eh < 200 mV), weak alkaline conditions (pH < 7.2), elevated concentrations of dissolved Fe(II) and S(-II), and high proportions of As (III); 2) As species in the groundwater changed dramatically at room temperature in 36 hours post extraction (HPE). Fe-sulfide and Fe oxides minerals, which adsorbed As (V), were the main reasons influencing the As species concentration; 3) Acidification and strong complexing agents cannot preserve As species effectively. The average proportion of As (III) in the wells, where groundwater samples from the depth of 25 m exceed 10 μg L^-1 As, can be reduced by 61% and 63% after HCl and EDTA were added, respectively. Accurate assessment of concentrations and distribution variation of As species in groundwater can guide the removal of As and the safe use of water resources, especially in drought areas relying on drinking well water.

A new method for highly efficient separation and determination of arsenic species in natural water using silica modified with polyamines

A simple and highly efficient method for the determination of highly toxic arsenic species using non-covalently aminated silica is proposed. The polyamines including poly(hexamethyleneguanidine), poly(4,9-dioxadodecane-1,12-guanidine), hexadimethrine, and poly(diallyldimethylammonium) were tested as silica modifiers. The prepared adsorbents allow effective preconcentration of anionic species of arsenic from aqueous solutions. It was found that As(V) can be quantitatively extracted from solutions at pH 4.5-7.0 by the anion exchange mechanism in less than 5 min, while neutral at this pH As(III) was not adsorbed at these conditions. A reaction with 2,3-dimercapto-1-propanesulphonic acid, which resulted in the formation of the negatively charged complex of As(III) with adsorbents was used for its quantitative extraction from solutions with a pH of 3.5-6.5. A system of two cartridges filled with poly(diallyldimethylammonium) modified silica and the on-line reaction of As(III) with 2,3-dimercapto-1-propanesulphonic acid proceeding between the cartridges was used for separate preconcentration and determination of As(V) and As(III) at pH 5. The proposed method was used for four-year monitoring of natural water pollution by arsenic in the area of residence of the indigenous peoples of Tyva Republic (Russia).

Portable and rapid arsenic speciation in synthetic and natural waters by an As(V)-selective chemisorbent, validated against anodic stripping voltammetry

Inorganic arsenic speciation, i.e. the differentiation between arsenite and arsenate, is an important step for any program aiming to address the global issue of arsenic contaminated groundwater, whether for monitoring purposes or the development of new water treatment regimes. Reliable speciation by easy-to-use, portable and cost-effective analytical techniques is still challenging for both synthetic and natural waters. Here we demonstrate the first application of an As(V)-selective chemisorbent material for simple and portable speciation of arsenic using handheld syringes, enabling high sample throughput with minimal set-up costs. We first show that ImpAs efficiently removes As(V) from a variety of synthetic groundwaters with a single treatment, whilst As(III) is not retained. We then exemplify the potential of ImpAs for simple and fast speciation by determining rate constants for the photooxidation of As(III) in the presence of a TiO₂ photocatalyst. Finally, we successfully speciate natural waters spiked with a mix of As(III) and As(V) in both Indian and UK groundwaters with less than 5 mg L^-1 dissolved iron. Experimental results using ImpAs agreed with anodic stripping voltammetry (ASV), a benchmark portable technique, with analysis conditions optimised here for the groundwaters of South Asia. This new analytical tool is simple, portable and fast, and should find applications within the overall multi-disciplinary remediation effort that is taking place to tackle this worldwide arsenic problem.

Preconcentration with Chlorella vulgaris combined with energy dispersive X-ray fluorescence spectrometry for rapid determination of Cd in water

Freshwater green algae Chlorella vulgaris was selected as an adsorbent, and a simple, rapid, economical and environmentally friendly method for the detection of heavy metal Cd in water samples based on preconcentration with C. vulgaris combined with energy dispersive X-ray fluorescence (EDXRF) spectrometry was proposed.  Chlorella vulgaris could directly and rapidly adsorb Cd²⁺ without any pretreatment, and the maximum adsorption efficiency could be obtained when the contact time was 1 min with an optimal pH of 10. The obtained Cd-enriched thin samples after preconcentration with C. vulgaris by suction filtration of reaction solution had very good uniformity, which could be directly measured by EDXRF spectrometry, and the net integral fluorescence intensity of Cd Kα characteristic peak had a very good linear relationship with the initial concentration of Cd in the range of 0.703-74.957 µg ml^-1 with a correlation coefficient of 0.9979. When the Cd thin samples with a Cd-enriched region of 15.1 mm in diameter were formed by the developed preconcentration method with suction filtration of 10 ml reaction solution, the detection limit of this method was 0.0654 µg ml^-1, which was lower than the maximum allowable discharge concentration of Cd in various industrial wastewaters. The proposed method was simple to operate, and could effectively remove the influence of matrix effect of water samples and effectively improve the sensitivity and stability of EDXRF spectrometry directly detecting heavy metals in water samples, which was successfully applied to detect Cd in real water samples with satisfactory results, and the recoveries ranged from 94.80% to 116.94%. Moreover, this method can be applied to the rapid detection and early warning of excessive Cd in discharged industrial wastewaters. This work will provide a methodological basis for the development of rapid and online monitoring technology and instrument of heavy metal pollutants in water.

The speciation of inorganic arsenic in soil and vegetables irrigated with treated municipal wastewater

An efficient method using vortex-assisted microextraction based on a deep eutectic solvent followed by graphite furnace atomic absorption spectrometry was developed for the determination of arsenic species in soil and vegetables irrigated with treated wastewater.

Total reflection X-ray fluorescence

Total reflection X-ray fluorescence (TXRF) spectrometry is a non-destructive and surface sensitive multi-element analytical method based on energy dispersive X-ray fluorescence spectrometry with detection limits in the lower picogram range. It utilizes the total reflection of the primary X-ray beam at or below the critical angle of incidence. At this angle, the fluorescence intensity is substantially enhanced for samples present as small granular residue or as thin homogenous layer deposited at the surface of a thick substrate. Generally, two types of application exist: micro- and trace-analysis as well as surface and thin-layer analysis. For micro- and trace-analysis, a small amount of the solid or liquid sample is deposited on an optically flat substrate, typically quartz or polycarbonate. The dried residue is analyzed at a fixed angle setting slightly below the critical angle. Quantification is carried out by means of internal standardization. For surface and thin-layer analysis, the surface of an optically flat substrate is scanned. Variations of the incident angle of the primary X-ray beam provide information about the type and sometimes also the amount of material present at or slightly below the surface of the substrate. Major fields of application are environmental samples, biological tissues, objects of cultural heritage, semiconductors and thin-layered materials and films.

Determination and speciation of ultratrace arsenic and chromium species using aluminium oxide supported on graphene oxide

Alumina supported on graphene oxide (Al₂O₃/GO) nanocomposite as new nanosorbent in dispersive micro-solid phase extraction (DMSPE) for As(V) and Cr(III) preconcentration is described. The crucial issue of the study is synthesis of novel nanocomposite suitable for sorption of selected species of arsenic and chromium. Al₂O₃/GO demonstrates selectivity toward arsenates in the presence of arsenites at pH 5 and chromium(III) ions in the presence of chromate anions at pH 6. The Al₂O₃/GO nanocomposite was characterized by scanning electron microscopy (SEM) transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and the Raman spectroscopy. The maximum adsorption capacity calculated based on the Langmuir adsorption model were 43.9 mg g^-1 and 53.9 mg g^-1 for As(V) and Cr(III), respectively. The nanocomposite was used as solid sorbent in preconcentration of As(V) and Cr(III)_ions from water samples and their determination using energy dispersive X-ray fluorescence spectrometry (EDXRF). The As(V) and Cr(III) ions can be quantitatively preconcentrated from 25 to 100 mL aqueous samples within 5 min using DMSPE procedure and 1 mg of Al₂O₃/GO. The nanocomposite was also used for preparation of Al₂O₃/GO membrane. Then, As(V) and Cr(III)_ions can be retained under flow condition by passing analyzed solution through Al₂O₃/GO membrane. Under the optimized conditions, As(V) and Cr(III) ions can be determined with very good recovery (92-108%), precision (RSD 2.7-4.0%) and excellent limit of detection (0.02 ng mL^-1 As and 0.11 ng mL^-1 Cr). The accuracy of the method was studied by analyzing certified reference materials (NIST 1640a) and spiked real water samples.