Synchrotron radiation total reflection X-ray fluorescence (SR-TXRF) and X-ray absorption near edge structure (XANES) of fractionated air particulates collected from Jeddah, Saudi Arabia

Temporal and Spatial Variations of Potentially Toxic Elements in PM10 Collected in Jeddah City, Saudi Arabia

Air pollution causes environmental and health problems around the world. In this study, ambient particulate matter with an aerodynamic diameter equal to or less than 10 microns (PM10) has been collected at three different locations in Jeddah city, Saudi Arabia. The locations are characterized by differences in terms of traffic, residential intensity, industrial, and non-road mobile machinery activities. The monthly and annual mass concentration of the PM10 exceeds the recommended annual limit of the World Health Organization (15 µg/m3) and the European air quality standard (40 µg/m3) at the three locations. The collected PM10 samples as well as a certified reference material of atmospheric particulates (NIST 1678a) were digested in aqua regia using microwave digestion. The quantitative elemental analysis was carried out using inductively coupled plasma mass spectrometry. The variations of the elemental concentration in terms of workdays, weekends, seasons, and annual were determined at the three locations. The spatial and temporal elemental variations were found to be different between the three sites, pointing to local influences that should be further evaluated. The concentration of Cd was found to be high and may cause health problems.

Spectroscopic Assessment of Platinum Group Elements of PM10 Particles Sampled in Three Different Areas in Jeddah, Saudi Arabia

Platinum group elements (PGE) including Ru, Rh, Pt and Pd have been quantified in air particulate matter with an aerodynamic diameter equal or less than 10 microns (PM₁₀) using inductively coupled plasma mass spectrometry (ICP-MS). PM₁₀ aerosols have been collected from three sites representing various activities in Jeddah city, Saudi Arabia. These locations are residential site with heavy traffic, industrial site and heavy traffic and a light traffic site outside the city. To obtain reasonable data of the PGE concentrations, a group from 10 to 15 PM₁₀ samples were collected every month. The annual and seasonal variation of the mass concentration of the PGE were demonstrated. In all locations, Pt and Pd were relatively higher than Ru and Rh possibly because their main use is in automobile catalytic converters. Concentrations of observed PGE in PM₁₀ could be arranged in ascending order as: Rh < Ru < Pd < Pt. In case of Ru and Pt, there are clear similarities in terms of the overall mean concentrations at the sampling locations. Due to the high concentration of Ru, Rh and Pd at low traffic site, there are certainly other sources of these elements rather than vehicle catalytic converters. However, at the industrial/heavy traffic location, high concentrations of Ru were detected during February 2015. In addition, high Pt concentrations were also detected at the light traffic site during May 2015. Results indicate that Pt source in PM₁₀ is mainly the automobile catalytic converters.

Recent advances in analysis of trace elements in environmental samples by X-ray based techniques (IUPAC Technical Report)

Trace elements analysis is a fundamental challenge in environmental sciences. Scientists measure trace elements in environmental media in order to assess the quality and safety of ecosystems and to quantify the burden of anthropogenic pollution. Among the available analytical techniques, X-ray based methods are particularly powerful, as they can quantify trace elements in situ. Chemical extraction is not required, as is the case for many other analytical techniques. In the last few years, the potential for X-ray techniques to be applied in the environmental sciences has dramatically increased due to developments in laboratory instruments and synchrotron radiation facilities with improved sensitivity and spatial resolution. In this report, we summarize the principles of the X-ray based analytical techniques most frequently employed to study trace elements in environmental samples. We report on the most recent developments in laboratory and synchrotron techniques, as well as advances in instrumentation, with a special attention on X-ray sources, detectors, and optics. Lastly, we inform readers on recent applications of X-ray based analysis to different environmental matrices, such as soil, sediments, waters, wastes, living organisms, geological samples, and atmospheric particulate, and we report examples of sample preparation.