Chemometrics-assisted voltammetric determination of timolol maleate and brimonidine tartrate utilizing a carbon paste electrode modified with iron (III) oxide nanoparticles

Novel quantum dots-based assay for the determination of anti-hypertensive drugs minoxidil and timolol in different matrices

The present work reports a sensitive, affordable, and ecologically friendly spectrofluorimetric method for the assessment of two antihypertensive medications, namely minoxidil and timolol. Blue-emitting sulfur and nitrogen co-doped carbon quantum dots (S,N-CQDs) were generated by exposing soluble starch and thiourea to a 15-minute microwave treatment. The so- prepared nanodots displayed fluorescence at 276/430 nm with a quantum yield of 22 %. Inspection of the so-prepared nano-sensor verified their doping with nitrogen and sulfur, and their size was in the range of 4.5-9.03 nm. The proposed method was found to be rectilinear in the range of 0.20-5.0 and 2.0-30.0 µg/mL, with LOQs of 0.16 and 0.82 µg/mL for minoxidil and timolol, respectively. The developed method was employed to assess the concentrations of minoxidil and timolol in their pharmaceutical formulations, with %recoveries varying between 99.00 % and 101.94 %, and low RSD values (less than 2 %). The high sensitivity of the developed method allowed its use for timolol measurement in artificial aqueous humor, with % recoveries between 97.60 %.and 101.57 %. The study further examined how each analyte interacted with the prepared dots, leading to a quenching of their fluorescence. Additionally, an interference study was utilized to evaluate the specificity of the proposed approach through determining analyte levels in the existence of common additives, co-formulated drugs, and co-administered drugs. The analytical eco-scale, GAPI and AGREE assessment techniques were utilized to confirm the suggested method greenness.

Real-Time Measurement of Antiglaucoma Drugs in Porcine Eyes Using Boron-Doped Diamond Microelectrodes

The primary treatment for glaucoma, the most common cause of intermediate vision impairment, involves administering ocular hypotensive drugs in the form of topical eye drops. Observing real-time changes in the drugs that pass through the cornea and reach the anterior chamber of the eye is crucial for improving and developing safe, reliable, and effective medical treatments. Traditional methods for measuring temporal changes in drug concentrations in the aqueous humor employ separation analyzers such as LC-MS/MS. However, this technique requires multiple measurements on the eyes of various test subjects to track changes over time with a high temporal resolution. To address this issue, we have developed a measurement method that employs boron-doped diamond (BDD) microelectrodes to monitor real-time drug concentrations in the anterior chamber of the eye. First, we confirmed the electrochemical reactivity of 13 antiglaucoma drugs in a phosphate buffer solution with a pH of 7.4. Next, we optimized the method for continuous measurement of timolol maleate (TIM), a sympathetic beta-receptor antagonist, and generated calibration curves for each BDD microelectrode using aqueous humor collected from enucleated porcine eyes. We successfully demonstrated the continuous ex vivo monitoring of TIM concentrations in the anterior chambers of these enucleated porcine eyes. The results indicate that changes in intracameral TIM concentrations can be monitored through electrochemical measurements using BDD microelectrodes. This technique holds promise for future advancements in optimizing glaucoma treatment and drug administration strategies.

A highly sensitive and green electroanalytical method for the determination of favipiravir in pharmaceutical and biological fluids

BACKGROUND

Favipiravir is currently used for the treatment of coronavirus disease-2019 (COVID-19).

OBJECTIVE

A highly sensitive and eco-friendly electroanalytical method was developed to quantify favipiravir.

METHOD

The voltammetric method optimized a sensor composed of reduced graphene oxide / modified carbon paste electrode in the presence of an anionic surfactant, improving the favipiravir detection limit. The investigation reveals that favipiravir-oxidation is a diffusion-controlled irreversible process. The effects of various pH and scan rates on oxidation anodic peak current were investigated.

RESULTS

The developed method offers a wide linear dynamic range of 1.5-420 ng/mL alongside a higher sensitivity with a limit of detection in the nanogram range (0.44 ng/mL) and a limit of quantification in the low nanogram range (1.34 ng/mL).

CONCLUSION

The proposed method was applied for the determination of favipiravir in the dosage form, human plasma and urine samples. The developed method exhibited good selectivity in the presence of two potential electroactive biological interferants, uric acid which increases during favipiravir therapy and the recommended co-administered vitamin C. The organic solvent-free method greenness was evaluated via the Green Analytical Procedure Index, The present work offers a simple, sensitive and environment-friendly method fulfilling green chemistry concepts.

Brimonidine

Brimonidine is a highly selective 2-adrenoceptor agonist that lowers intraocular pressure (IOP) by decreasing aqueous humor production and increasing aqueous humor outflow via the uveoscleral route. Brimonidine is used to treat glaucoma and other eye conditions. Brimonidine is a topical medication that is used mainly to treat open-angle glaucoma and ocular hypertension in the eyelids. The purpose of this chapter is to provide a comprehensive discussion of Brimonidine's nomenclature, physiochemical properties, preparation methods, identification procedures, and numerous qualitative and quantitative analytical techniques, as well as its ADME profiles and pharmacological effects. In addition, the chapter contains numerous approaches for separating brimonidine from other medications in combination formulations utilizing chromatographic techniques and other spectroscopic approaches.

Green HPLC method with time programming for the determination of the co-formulated eye drops of tafluprost and timolol in their challengeable ratio

A new, simple and selective HPLC method was implemented for the simultaneous estimation of tafluprost (TFL) and timolol (TIM) in their new anti-glaucoma combination in the challengeable ratio of 3 and 1000 for TFL and TIM, respectively. Separation was achieved using a BDS Hypersil phenyl column and a mobile phase made up of acetonitrile: 0.015 M phosphate buffer (50:50 v/v, pH 3.5) delivered at 1 mL min⁻¹ and the separation was completed in less than 6 min. UV detection was time programmed at 220 nm for the first 4.5 min and later at 254 nm. Mebeverine (MEB) was used as an internal standard (I.S.). The linearity was observed in the ranges of 0.6–45 and 50–2000 µg mL⁻¹ with limits of detection (LOD) of 0.18, 16.48 µg mL⁻¹ and limits of quantification (LOQ) of 0.55, 49.94 µg mL⁻¹ for TFL and TIM, respectively. The method satisfied International Council for Harmonization (ICH) validation guidelines. The study was extended to the estimation of the studied drugs in their co-formulated eye drops as well as in their single dosage forms with acceptable percentage recoveries. Moreover, Green Analytical Procedure Index (GAPI) and analytical Eco-scale were investigated to confirm the greenness of the proposed HPLC method.

Modification of screen-printed gold electrode with 1,4-dithiothreitol: application to sensitive voltammetric determination of Sudan II

Objectives

The aim of this study is to investigate the electrochemical behavior of Sudan II (SuII) using a screen-printed gold electrode (SPGE) modified with 1,4-dithiothreitol (DTT) and to determine the amount of Sudan II by voltammetry.

Materials and Methods

A DTT-modified screen-printed gold electrode (DTT/SPGE) was fabricated and its application for differential pulse voltammetric (DPV) determination of SuII was reported. Fourier transform infrared spectroscopy (FT-IR), cyclic voltammetry and electrochemical impedance spectroscopy were used for the characterization of the modified electrode. The effects of instrumental and chemical parameters were optimized for the determination of SuII. The fabricated electrode was used for the analysis of SuII in fortified and real samples. High-performance liquid chromatography was preferred as a reference method for the evaluation of the obtained voltammetric results.

Results

The electrochemical studies and FT-IR demonstrated that the SPGE was modified with DTT. The obtained peak current at DTT/SPGE was 6.67 times higher than that recorded with SPGE. At the optimized conditions of DPV in pH = 2.5 of H2SO4, the oxidation peak current of SuII was proportional to its concentration in range: 0.001–1.500 μmol l–1 with a detection limit of 0.0002 μmol l–1 (S/N = 3). For the analysis of SuII, 101.67%–104.33% of recovery percentage was obtained.

Conclusions

A new electrode was successfully improved for the determination of SuII. This highly selective and sensitive electrode supplied the fast determination of SuII in ketchup, chili sauce and salsa dip sauce. In addition, voltammetric and chromatographic results are found to be consistent.

Single quad mass analyzer coupled UPLC method for impurity profile of Brimonidine tartrate and Timolol maleate: Application in their binary mixture ophthalmic formulation

The main objective of the study is to develop a suitable and rapid UPLC/PDA method by coupling online to Quadrupole Dalton analyzer (QDa), a mass detector for the identification and impurity profiling of Brimonidine Tartrate (BRIM)/Timolol maleate (TIMO) in the ophthalmic formulation. Chromatographic separation was achieved on ethylene bridged hybrid octadecylsilane column having 1.7μm particle size in gradient mode using high pure heptafluorobutyric acid as a buffer (A) and water, methanol, and acetonitrile (B) as mobile phase with a flow rate of 0.3mlmin^-1. Based on the spectral maxima, BRIM and its impurities were monitored at 248nm, and TIMO and its impurities were monitored at 295nm. During evaluation of stress conditions and stability data unknown degradants are observed and identified as m/z 218.01 (DP1) and m/z 390.03 (DP2) using QDa-ESI+ scanning mode technique. The performance of the method was systematically validated according to ICH Q2 (R1) guidelines and the method shown very good sensitivity (≥0.5μg.mL^-1) and linearity (r²≥0.999) with consistent recoveries and less than 5% RSD for all compounds. Hence, the proposed UPLC/PDA/QDa method is a simple, sensitive and comprehensive technique where identification and quantification can be done. It gives for complete impurity profile evaluation of BRIM/TIMO in the ophthalmic formulation during quality control in the pharmaceutical industry.