A new sensitive voltammetric determination of thymol based on MnY nanozeolite modified carbon paste electrode using response surface methodology

An electrochemical sensor based on molecularly imprinted poly(o-phenylenediamine) for the detection of thymol

A molecularly imprinted electrochemical sensor was facilely fabricated for the detection of thymol (THY). o-Phenylenediamine (oPD) was used as the functional monomer and electropolymerized on the surface of the glassy carbon electrode (GCE) by using THY as the templates. After the THY templates were removed with 50 % (v/v) ethanol, imprinted cavities complementary to the templates were formed within the poly(o-phenylenediamine) (PoPD) films. The resultant molecularly imprinted PoPD/GCE (MI-PoPD/GCE) was used for the detection of THY, and a wide linear range from 0.5 to 100 μM with a low limit of detection (LOD) of 0.084 μM were obtained under the optimal conditions. The developed MI-PoPD/GCE also displays high selectivity, reproducibility and stability for THY detection. Finally, the content of THY in the real samples was accurately determined by the as-fabricated MI-PoPD/GCE, demonstrating its high practicability and reliability.

Nickel-Cobalt Salen Organometallic Complexes Encapsulated in Mesoporous NaA Nanozeolite for Electrocatalytic Quantification of Ascorbic Acid and Paracetamol

Goal of current study was fabrication of novel voltammetric nanosensor for the synchronize quantification of ascorbic acid (AA) and paracetamol (PAR) by nickel-cobalt salen complexes encapsulated in the supercages of NaA nanozeolite modified carbon paste electrode (NiCoSalenA/CPE). For this purpose, NiCoSalenA nanocomposite was firstly prepared and characterized by various methods. Also, cyclic voltammetry (CV), choronoamperometry (CHA) and differential pulse voltammetry (DPV) were utilized to evaluate performance of the modified electrodes. The effects of pH and modifier amount were considered on the electrochemical oxidation of AA and PAR on the surface of NiCoSalenA/CPE. Results from this method indicated that pH of 3.0 in phosphate buffer solution (0.1 M) and 15 wt% of NiCoSalenA nanocomposite in the modified CPE results in the maximum current density. The oxidation signals of AA and PAR was amplified affectively at NiCoSalenA/CPE versus unmodified CPE. The limit of detection (LOD) and linear dynamic range (LDR) for the simultaneous measurement of them were founds to be 0.82 and 2.73-80.70 for AA and 0.51 µM, 1.71-32.50 and 32.50-137.60 µM for PAR, respectively. The catalytic rate constants (kcat) were attained to be 3.73 × 107 and 1.27 × 107 cm3 mol-1 s-1 for AA and PAR via CHA method, respectively. Also, the amounts of diffusion coefficient (D) were found to be 1.12 × 10-7 and 1.92 × 10-7 cm2 s-1 for AA and PAR, respectively. The average value of electron transfer rate constant between NiCoSalenA/CPE and PAR was obtained to be 0.016 s-1. The NiCoSalen-A/CPE displayed worthy stability, repeatability and extraordinary recovery for simultaneous measurements of AA and PAR. Application of offered sensor was confirmed by quantifying concentrations of AA and PAR in human serum solution as a real sample.

Design and Application of Thymol Electrochemical Sensor Based on the PtNPs-CPOFs-MWCNTs Composite

In this study, the preparation of covalent polyoxometalate organic frameworks (CPOFs) is introduced using the idea of polyoxometalate and covalent organic frameworks. Firstly, the prepared polyoxometalate was functionalized with an amine group (NH₂-POM-NH₂), and then the CPOFs were prepared by a solvothermal Schiff base reaction with NH₂-POM-NH₂ and 2,4,6-trihydroxybenzene-1,3,5-tricarbaldehyde (Tp) as monomers. After the incorporation of PtNPs and MWCNTs into the CPOFs material, the PtNPs-CPOFs-MWCNTs nanocomposites, which possess excellent catalytic activity and electrical conductivity, were formed and utilized as new electrode materials for the electrochemical thymol sensors. The obtained PtNPs-CPOFs-MWCNTs composite exhibits excellent activity toward thymol, which is attributable to its large special surface area, good conductivity and the synergistic catalysis of each component. Under optimal experimental conditions, the sensor presented a good electrochemical response to thymol. The sensor shows two good linear relationships between the current and thymol concentration in the range of 2-65 μM (R² = 0.996) and 65-810 μM (R² = 0.997), with the corresponding sensitivity of 72.7 μA mM^-1 and 30.5 μA mM^-1, respectively. Additionally, the limit of detection (LOD) was calculated to be 0.2 μM (S/N = 3). At the same time, the prepared thymol electrochemical sensor revealed superior stability and selectivity. The constructed PtNPs-CPOFs-MWCNT electrochemical sensor is the first example of thymol detection.

Electrode Based on the MWCNTs and Electropolymerized Thymolphthalein for the Voltammetric Determination of Total Isopropylmethylphenols in Spices

Isopropylmethylphenols, namely thymol and carvacrol, are natural phenolic monoterpenoids with a wide spectrum of bioactivity making them applicable in the cosmetic, pharmaceutical, and food industry. The dose-dependent antioxidant properties of isopropylmethylphenols require their quantification in real samples. Glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and electropolymerized thymolphthalein has been developed for the sensitive quantification of isopropylmethylphenols. Conditions of thymolphthalein electropolymerization (monomer concentration, number of cycles, and electrolysis parameters) providing the best response to thymol have been found. Scanning electron microscopy and electrochemical methods confirm the effectivity of the electrode developed. The linear dynamic ranges of 0.050-25 and 25-100 µM for thymol and 0.10-10 and 10-100 µM for carvacrol with detection limits of 0.037 and 0.063 µM, respectively, have been achieved in differential pulse mode in Britton-Robinson buffer pH 2.0. The selectivity of the isopropylmethylphenols response in the presence of typical interferences (inorganic ions, saccharides, ascorbic acid) and other phenolics (caffeic, chlorogenic, gallic and rosmarinic acids, and quercetin) is a significant advantage over other electrochemical methods. The electrode has been used in the analysis of oregano and thyme spices. Total isopropylmethylphenols contents have been evaluated after a single sonication-assisted extraction with methanol.

Voltammetric Determination of Isopropylmethylphenols in Herbal Spices

Thymol and carvacrol—the components of herbal spices—are known for their broad biological activity as antimicrobials and antioxidants. For this reason, it is important to develop new methods for their determination in plant material. A simple, rapid, and sensitive method for determination of total content of these analytes in herbal spices using differential pulse voltammetry (DPV) has been developed. The basis of the research is the oxidation process of isopropylmethylphenols on a platinum microelectrode in glacial acetic acid containing acetonitrile (20%, v/v) and 0.1 mol L⁻¹ sodium perchlorate as the supporting electrolyte. Linear voltammetric responses for thymol and carvacrol were obtained in a wide concentration range from 0.39–1105 and 0.47–640 µg mL⁻¹, with a low detection limit of 0.04 and 0.05 µg mL⁻¹, respectively. The analysis was performed using the multiple standard addition method. The results of the voltammetric determination are in good agreement with the data of the standard chromatographic method. To the best of our knowledge, this is the first presentation of an electrochemical procedure to determine these compounds in these environmental and electrode materials.

Enhancement of multianalyte mass spectrometry detection through response surface optimization by least squares and artificial neural network modelling

In this work, the use of design of experiments and posterior data modelling by artificial neural network (ANN) and least squares (LS) is presented as a suitable analytical tool for the performance optimization of a tandem mass spectrometric detector coupled to ultra-high performance liquid chromatography for the analysis of seventeen veterinary drugs. Firstly, a central composite design was built considering as factors the cone, capillary, extractor and radio frequency voltages of the mass spectrometer in order to obtain a proper combination to improve the sensitivity of the method. Secondly, a one factor design considering the collision voltage was built to define the adequate voltage for each daughter ion. The response surface methodology (RSM) was then applied, and the prediction capability of ANN and LS were compared. As conclusion, the ANN modelling provided better results than LS, both in terms of the ANOVA and predicted areas results. The accuracy of the model prediction was between 85 and 125%, confirming that the estimates of the model were correct, and endorsing the optimization procedure as a suitable way to gather excellent results. The suitability of the new approach and its implications on the simultaneous analysis of seventeen veterinary drugs by ultra-high liquid chromatography coupled to tandem mass spectrometry detection are discussed.