Dissimilar effects of the hydrophilic carbon dots on the amyloid aggregation of two model proteins and the mechanism discussion

Many proteins could aggregate into amyloid fibrils under certain conditions. However, the aggregation process and morphology of the fibrils may be significantly different because of the distinct protein structure. In this article, the hydrophilic carbon dots (Lys-CA-CDs) were prepared using lysine (Lys) and citric acid (CA) as reactant under the assistance of a microwave. The dissimilar modulation effect of Lys-CA-CDs on the aggregation process of distinct structure protein was further investigated, where bovine serum albumin (BSA) and hen egg white lysozyme (HEWL) were chosen as model proteins. All results showed that Lys-CA-CDs displayed the contrary influence on the aggregation process of BSA and HEWL. Lys-CA-CDs could induce BSA to aggregate into more wormlike fibrils and inhibit the aggregation of HEWL into hair-like fibrils. The influence on the aggregation process of BSA may be assigned to the increased concentration of BSA around the Lys-CA-CDs caused by their interaction. However, inserting of Lys-CA-CDs into the inner structure of HEWL led to the change of protein secondary structure. The change of secondary structure further made it difficult for HEWL to aggregate into fibrils and Lys-CA-CDs showed the inhibition effect on HEWL aggregation.

Remote Manipulation of TRPV1 Signaling by Near-Infrared Light-Triggered Nitric Oxide Nanogenerators for Specific Cancer Therapy

Specific activation of transient receptor potential vanilloid member 1 (TRPV1) channels provides a new avenue for cancer treatment by inducing excessive Ca2+ influx. However, controllable manipulation of TRPV1 signaling for clinical application has remained elusive due to the challenge in finding a mild and effective method of exerting external stimulus without adverse side effects in living systems. Herein, a TRPV1-targeting near-infrared (NIR) triggered nitric oxide (NO)-releasing nanoplatform (HCuS@PDA-TRPV1/BNN6) based on polydopamine (PDA) coated hollow copper sulfide nanoparticles (HCuS NPs) is developed for specific cancer therapy. Upon NIR irradiation, the NO donor BNN6 encapsulated in NIR-responsive nanovehicles can locally generate NO to activate TRPV1 channels and induce Ca2+ influx. This NIR controlled mode enables the nanoplatform to exert its therapeutic effects below the apoptotic threshold temperature (43°C), minimizing the photothermal damage to normal tissue. Integrating this special NO-mediated therapy with HCuS NPs mediated chemodynamic therapy, the designed nanoplatform exhibits a boosted anticancer activity with negligible systematic toxicity. Together, this study provides a promising strategy for site-specific cancer therapy by spatiotemporally controlled activation of surface ion channels, thus offering a solution to an unmet clinical need in cancer treatment.

A Smart Bacteria-Capture-Killing Vector for Effectively Treating Osteomyelitis Through Synergy Under Microwave Therapy

Osteomyelitis caused by deep tissue infections is difficult to cure through phototherapy due to the poor penetration depth of the light. Herein, Cu/C/Fe3O4-COOH nanorod composites (Cu/C/Fe3O4-COOH) with nanoscale tip convex structures are successfully fabricated as a microwave-responsive smart bacteria-capture-killing vector. Cu/C/Fe3O4-COOH exhibited excellent magnetic targeting and bacteria-capturing ability due to its magnetism and high selectivity affinity to the amino groups on the surface of Staphylococcus aureus (S. aureus). Under microwave irradiation, Cu/C/Fe3O4-COOH efficiently treated S. aureus-infected osteomyelitis through the synergistic effects of microwave thermal therapy, microwave dynamic therapy, and copper ion therapy. It is calculated the electric field intensity in various regions of Cu/C/Fe3O4-COOH under microwave irradiation, demonstrating that it obtained the highest electric field intensity on the surface of copper nanoparticles of Cu/C/Fe3O4-COOH due to its high-curvature tips and metallic properties. This led to copper nanoparticles attracted more charged particles compared with other areas in Cu/C/Fe3O4-COOH. These charges are easier to escape from the high curvature surface of Cu/C/Fe3O4-COOH, and captured by adsorbed oxygen, resulting in the generation of reactive oxygen species. The Cu/C/Fe3O4-COOH designed in this study is expected to provide insight into the treatment of deep tissue infections under the irradiation of microwave.

A novel n-UV convertible colour-tunable emitting oxynitride phosphor: Realization based on Ce3+ -Tb3+ energy transfer

In the present work, a novel n-UV convertible colour-tunable emitting phosphor was obtained based on the efficient Ce3+ -Tb3+ energy transfer in the Y10 Al2 Si3 O18 N4 host. By properly controlling the ratio of Ce3+ /Tb3+ , the colour hue of the obtained powder covered the blue and green regions, under excitation of 365 nm. The steady-state and dynamic-state luminescence measurement was performed to shed light on the related mechanism, which was justified by the electronic dipole-quadrupole dominating the related energy transfer process. Preliminary studies showed that Y10 Al2 Si3 O18 N4 :Ce3+ ,Tb3+ can be promising as an inorganic phosphor for white LED applications.

Synthesis and Catalytic Applications of Advanced Sn- and Zr-Zeolites Materials

The incorporation of isolated Sn (IV) and Zr (IV) ions into silica frameworks is attracting widespread attention, which exhibits remarkable catalytic performance (conversion, selectivity, and stability) in a broad range of reactions, especially in the field of biomass catalytic conversion. As a representative example, the conversion route of carbohydrates into valuable platform and commodity chemicals such as lactic acid and alkyl lactates, has already been established. The zeotype materials also possess water-tolerant ability and are capable to be served as promising heterogeneous catalysts for aqueous reactions. Therefore, dozens of Sn- and Zr-containing silica materials with various channel systems have been prepared successfully in the past decades, containing 8 membered rings (MR) small pore CHA zeolite, 10-MR medium pore zeolites (FER, MCM-56, MEL, MFI, MWW), 12-MR large pore zeolites (Beta, BEC, FAU, MOR, MSE, MTW), and 14-MR extra-large pore UTL zeolite. This review about Sn- and Zr-containing metallosilicate materials focuses on their synthesis strategy, catalytic applications for diverse reactions, and the effect of zeolite characteristics on their catalytic performances.

Electron Aggregation and Oxygen Fixation Reinforced Microwave Dynamic and Thermal Therapy for Effective Treatment of MRSA-Induced Osteomyelitis

Antibiotics are frequently used to clinically treat osteomyelitis caused by bacterial infections. However, extended antibiotic use may result in drug resistance, which can be life threatening. Here, a heterojunction comprising Fe2 O3 /Fe3 S4 magnetic composite is constructed to achieve short-term and efficient treat osteomyelitis caused by methicillin-resistant Staphylococcus aureus (MRSA). The Fe2 O3 /Fe3 S4 composite exhibits powerful microwave (MW) absorption properties, thereby effectively converting incident electromagnetic energy into thermal energy. Density functional theory calculations demonstrate that Fe2 O3 /Fe3 S4 possesses significant charge accumulation and oxygen-fixing capacity at the heterogeneous interface, which provides more active sites and oxygen sources for trapping electromagnetic hotspots. The finite element analysis indicates that Fe2 O3 /Fe3 S4 displays a larger electromagnetism field enhancement parameter than Fe2 O3 owing to a significant increase in electromagnetic hotspots. These hotspots contribute to charge differential accumulation and depletion motions at the interface, thereby augmenting the release of free electrons that subsequently combine with the oxygen adsorbed by Fe2 O3 /Fe3 S4 to generate reactive oxygen species (ROS) and heat. This research, which achieves extraordinary bacterial eradication through the synergistic effect of microwave thermal therapy (MWTT) and microwave dynamic therapy (MDT), presents a novel strategy for treating deep-tissue bacterial infections.

Instant Protection Spray for Anti-Infection and Accelerated Healing of Empyrosis

Distinct from common injuries, deep burns often require a chronic recovery cycle for healing and long-term antibiotic treatment to prevent infection. The rise of drug-resistant bacteria has caused antibiotics to no longer be perfect, and continuous drug use can easily lead to repeated infection and even death. Inspired by wild animals that chew plants to prevent wound infection, probiotic extracts with a structure similar to the tailspike of phage are obtained from Lactobacillus casei and combined with different flavones to design a series of nonantibiotic bactericides. These novel antibacterial agents are combined with a rapid gelation spray with a novel cross-angle layout to form an instant protection spray (IPS) and provide a physical and anti-infectious barrier for burns within 30 s. This IPS is able to sterilize 100.00% and 96.14% of multidrug-resistant Staphylococcus aureus (MRSA) in vitro and in vivo, respectively. In addition, it is found to effectively reduce inflammation in MRSA-infected burns in rats and to promote tissue healing.

Design of Ion Channel Confined Binary Metal Cu-Fe Selenides for All-Climate, High-Capacity Sodium Ion Batteries

Exploring special anode materials with high capacity, stable structure, and extreme temperature feasibility remains a great challenge in secondary sodium based energy systems. Here, a bimetallic Cu-Fe selenide nanosheet with refined nanostructure providing confined internal ion transport channels are reported, in which the structure improves the pseudocapacitance and reduces the charge transfer resistance for making a significant contribution to accelerating the reaction dynamics. The CuFeSe2 nanosheets have a high initial specific capacity of 480.4 mAh g-1 at 0.25 A g-1 , showing impressively excellent rate performance and ultralong cycling life over 1000 cycles with 261.1 mAh g-1 at 2.5 A g-1 . Meanwhile, it exhibits a good sodium storage performance at extreme temperatures from -20 °C to 50 °C, supporting at least 500 cycles. Besides, the CuFeSe2 ||Na3 V2 (PO4 )3 /C full cell delivers a high specific capacity of 168.5 mAh g-1 at 0.5 A g-1 and excellent feasibility for over 600 cycles long cycling. Additionally, the Na+ storage mechanisms are further revealed by ex situ X-ray diffraction (XRD) and in situ transmission electron microscopy (TEM) techniques. A feasible channelized structural design strategy is provided that inspires new instruction into the development of novel materials with high structural stability and low volume expansion rate toward the application of other secondary batteries.

Motor intent recognition of multi-feature fusion EEG signals by UMAP algorithm

The key to the analysis of electroencephalogram (EEG) signals lies in the extraction of effective features from the raw EEG signals, which can then be utilized to augment the classification accuracy of motor imagery (MI) applications in brain-computer interface (BCI). It can be argued that the utilization of features from multiple domains can be a more effective approach to feature extraction for MI pattern classification, as it can provide a more comprehensive set of information that the traditional single feature extraction method may not be able to capture. In this paper, a multi-feature fusion algorithm based on uniform manifold approximate and projection (UMAP) is proposed for motor imagery EEG signals. The brain functional network and common spatial pattern (CSP) are initially extracted as features. Subsequently, UMAP is utilized to fuse the extracted multi-domain features to generate low-dimensional features with improved discriminative capability. Finally, the k-nearest neighbor (KNN) classifier is applied in a lower dimensional space. The proposed method is evaluated using left-right hand EEG signals, and achieved the average accuracy of over 92%. The results indicate that, compared with single-domain-based feature extraction methods, multi-feature fusion EEG signal classification based on the UMAP algorithm yields superior classification and visualization performance. Feature extraction and fusion based on UMAP algorithm of left-right hand motor imagery.

Efficient Surfactant-Mediated Photovoltaic Manipulation of fL-Scale Aqueous Microdroplets for Diverse Optofluidic Applications on LiNbO3 Platform

The electrodeless biocompatible manipulation of femtoliter-scale aqueous microdroplets remains challenging. The appropriate isolation of electrostatic charges from femtoliter-scale aqueous microdroplets is crucial for electrodeless optoelectronic manipulation based on space-charge-density modulation. Here, surfactant-mediated photovoltaic manipulation is proposed, where the surfactant layers self-assembled at the water-oil and oil-Lithium niobate interfaces are employed to isolate photovoltaic charges. The reduced electrostatic attenuation, remarkable hydrophobicity, and strong electrical breakdown suppression of the surfactant layers enable the stable and swift manipulation of femtoliter-scale aqueous microdroplets using µW-level laser in oil media. By virtue of the surfactant-mediated photovoltaic manipulation, a controllable merging/touching/detaching switch of aqueous microdroplets by adjusting the laser illumination intensity and position is realized and the cascading biochemical operations and microreactions of aqueous microdroplets and microdroplet strings are demonstrated. To demonstrate its potential in photonic Micro-Electro-Mechanical-System assemblies, the end coupling of a focused-laser-beam into a ZnO microrod leveraging the refraction effect occurring at the water/oil interface is demonstrated. Moreover, because of the selective permeability of the droplet-interface-bilayer developed between the touching microdroplets, in situ adjustment of the size of the microdroplets and the fluorescent solute contained in the microdroplets are achieved, aiming at constructing multicomponent fluorescent microdroplets with tunable whispering-gallery-mode characteristics.

An Integrated Electrochemical System for Synergistic Cathodic Nitrate Reduction and Anodic Sulfite Oxidation

Electrochemical reduction of nitrate has broad application prospects. However, in traditional electrochemical reduction of nitrate, the low value of oxygen produced by the anodic oxygen evolution reaction and the high overpotential limit its application. Seeking a more valuable and faster anodic reaction to form a cathode-anode integrated system with nitrate reaction can effectively accelerate the reaction rate of the cathode and anode, and improve the utilization of electrical energy. Sulfite, as a pollutant after wet desulfurization, has faster reaction kinetics in its oxidation reaction compared to the oxygen evolution reaction. Therefore, this study proposes an integrated cathodic nitrate reduction and anodic sulfite oxidation system. The effect of operating parameters (cathode potential, initial NO₃^--N concentration, and initial SO₃^2--S concentration) on the integrated system was studied. Under the optimal operating parameters, the nitrate reduction rate in the integrated system reached 93.26% within 1 h, and the sulfite oxidation rate reached 94.64%. Compared with the nitrate reduction rate (91.26%) and sulfite oxidation rate (53.33%) in the separate system, the integrated system had a significant synergistic effect. This work provides a reference for solving nitrate and sulfite pollution, and promotes the application and development of electrochemical cathode-anode integrated technology.

Superlattice Nanofilm on a Touchscreen for Photoexcited Bacteria and Virus Killing by Tuning Electronic Defects in the Heterointerface

Currently, the global COVID-19 pandemic has significantly increased the public attention toward the spread of pathogenic viruses and bacteria on various high-frequency touch surfaces. Developing a self-disinfecting coating on a touchscreen is an urgent and meaningful task. Superlattice materials are among the most promising photocatalysts owing to their efficient charge transfer in abundant heterointerfaces. However, excess electronic defects at the heterointerfaces result in the loss of substantial amounts of photogenerated charge carrier. In this study, a ZnOFe₂ O₃ superlattice nanofilm is designed via atomic layer deposition for photocatalytic bactericidal and virucidal touchscreen. Additionally, electronic defects in the superlattice heterointerface are engineered. Photogenerated electrons and holes will be rapidly separated and transferred into ZnO and Fe₂ O₃ across the heterointerfaces owing to the formation of ZnO, FeO, and ZnFe covalent bonds at the heterointerfaces, where ZnO and Fe₂ O₃ function as electronic donors and receptors, respectively. The high generation capacity of reactive oxygen species results in a high antibacterial and antiviral efficacy (>90%) even against drug-resistant bacteria and H1N1 viruses under simulated solar or low-power LED light irradiation. Meanwhile, this superlattice nanofilm on a touchscreen shows excellent light transmission (>90%), abrasion resistance (10⁶ times the round-trip friction), and biocompatibility.

Engineering Dynamic Defect of CeIII /CeIV -Based Metal-Organic Framework through Ultrasound-Triggered Au Electron Trapper for Sonodynamic Therapy of Osteomyelitis

Defect engineering is an important way to tune the catalytic properties of metal-organic framework (MOF), yet precise control of defects is difficult to achieve. Herein, a cerium-based MOF (CeTCPP) is decorated with Au nanoparticles. Under ultrasound irradiation, Au nanoparticles can precisely turn 1/3 of the pristine Ce³⁺ nodes into Ce⁴⁺ . With the stable existence of Ce⁴⁺ , the coordination of Ce nodes changed, causing the structural irregularity in CeTCPP-Au, so that the electron-hole recombination is obviously hindered, facilitating the generation of reactive oxygen species. Therefore, under 20 min of ultrasound irradiation, the CeTCPP-Au showed superior antibacterial efficacy of over 99% against Staphylococcus aureus and Escherichia coli with good biocompatibility, which is further used for effective therapy of osteomyelitis. Overall, this work provides a dynamic defect formation strategy of MOF through the electron trapping of Au nanoparticles, which also sheds light on sonodynamic therapy in curing deep-seated lesions.

Enhancing Microwave Dynamic Effects via Surface States of Ultrasmall 2D MOF Triggered by Interface Confinement for Antibiotics-Free Therapy

Microwave (MV)-trigged dynamic therapy based on MV-responsive materials is promising for treating deep infection diseases that cannot be effectively treated by antibiotics, like life-threatening osteomyelitis. Surface states of materials affect the generation of free charges under the excitation source with energy less than the band gap, consequently influencing the MV dynamic effects. Herein, an MV responsive system with interface confined 2D metal-organic framework (2D MOF) on oxidized carbon nanotube (CNT) is prepared, in which the ultrasmall Cu-based 2D MOF possesses sufficient surface/interface defects, endowing the system a large number of surface states. Under MV irradiation, the synthesized CNT-2D MOF not only efficiently absorbs and converts the microwave into heat for microwaveocaloric therapy (MCT) via enhanced hetero-interfacial polarization, but also generates excited electrons via surface state for microwave dynamic therapy (MDT). This biocompatible CNT-2D MOF exhibits highly effective broad-spectrum antimicrobial activity against seven pathogenic bacteria, including Gram-negative and Gram-positive pathogens, under 7 min MV irradiation. And this system is proven to efficiently eradicate Staphylococcus aureus infected rabbit tibia osteomyelitis. Significantly, MV-excited MCT and MDT of CNT-CuHHTP developed in this study makes a major step forward in antibiotic-free MV therapy in deep tissue bacterial infection diseases.

Interlayer Electrons Polarization of Asymmetric Metal Nanoclusters/g-C3 N4 for Enhanced Microwave Therapy of Pneumonia

Interlayer interactions in two dimensional (2D) materials promote catalytic performance but often depend on the transport of inter rather than intralayer electrons. In this study, it is found that asymmetric metal-nanocluster-doped 2D g-C₃ N₄ greatly enhances catalytic performance by inducing microwave excitation of interlayer electron delocalization, resulting in a polarization of interlaminar charge transport for microwave disinfection and pneumonia therapy. Asymmetric Fe and Cu nanocluster doping (DCN-FeCu) enables g-C₃ N₄ to generate interlayer electrons under microwave irradiation, leading to interlayer polarization processes and electron delocalization effects, thus enhancing the interlayer migration efficiency of electrons. It also improves impurity energy levels and leads to a decrease in work function, allowing DCN-FeCu to produce microwave carriers across the photoelectric potential barrier under low-energy microwave radiation (2.45 GHz). This asymmetric doping modulation produces layer number-dependent microwave electron excitations that are verified using multi-metal doping. Therefore, structurally modulated asymmetric doping of 2D materials with interfacial spatial effects can provide efficient microwave disinfection and pneumonia therapy.

Metal-Organic Framework-Derived Homologous Sulfide Heterojunction for Robust Enzyme-Like Self-Driven Bacteria-Killing through Enhanced Electron Transfer

Infectious diseases caused by various bacteria pose a serious threat to human health, and the emergence of drug-resistant bacteria has forced humans to develop new and effective antimicrobial agents and strategies. Herein, a metal-organic framework-derived Bi₂ S₃ /FeS₂ heterojunction (BFS) is synthesized, and the materials-microorganism interface is further constructed. Through interfacial electron transfer, electrons are transferred from the bacteria to the BFS surface, disrupting the balance of the bacterial electron transport chain and inhibiting the metabolic activity of the bacteria. Moreover, BFS has enzyme-like (oxidase and peroxidase) properties and can produce a large amount of reactive oxygen species to kill additional bacteria. In vitro antibacterial results show that the antibacterial efficiency of BFS against both Staphylococcus aureus and Escherichia coli reaches more than 99.9% after 4 h of co-culture under dark conditions. Meanwhile, in vivo experiments show that BFS can effectively kill bacteria and promote wound healing. This work shows that BFS could be a novel, effective nanomaterial for the treatment of bacterial infections by constructing the materials-microorganism interface.

Design and Application of Thymol Electrochemical Sensor Based on the PtNPs-CPOFs-MWCNTs Composite

In this study, the preparation of covalent polyoxometalate organic frameworks (CPOFs) is introduced using the idea of polyoxometalate and covalent organic frameworks. Firstly, the prepared polyoxometalate was functionalized with an amine group (NH₂-POM-NH₂), and then the CPOFs were prepared by a solvothermal Schiff base reaction with NH₂-POM-NH₂ and 2,4,6-trihydroxybenzene-1,3,5-tricarbaldehyde (Tp) as monomers. After the incorporation of PtNPs and MWCNTs into the CPOFs material, the PtNPs-CPOFs-MWCNTs nanocomposites, which possess excellent catalytic activity and electrical conductivity, were formed and utilized as new electrode materials for the electrochemical thymol sensors. The obtained PtNPs-CPOFs-MWCNTs composite exhibits excellent activity toward thymol, which is attributable to its large special surface area, good conductivity and the synergistic catalysis of each component. Under optimal experimental conditions, the sensor presented a good electrochemical response to thymol. The sensor shows two good linear relationships between the current and thymol concentration in the range of 2-65 μM (R² = 0.996) and 65-810 μM (R² = 0.997), with the corresponding sensitivity of 72.7 μA mM^-1 and 30.5 μA mM^-1, respectively. Additionally, the limit of detection (LOD) was calculated to be 0.2 μM (S/N = 3). At the same time, the prepared thymol electrochemical sensor revealed superior stability and selectivity. The constructed PtNPs-CPOFs-MWCNT electrochemical sensor is the first example of thymol detection.

Rapid Ferroelectric-Photoexcited Bacteria-Killing of Bi4Ti3O12/Ti3C2T x Nanofiber Membranes

In this study, an antibacterial nanofiber membrane [polyvinylidene fluoride/Bi₄Ti₃O₁₂/Ti₃C₂T _x (PVDF/BTO/Ti₃C₂T _x )] is fabricated using an electrostatic spinning process, in which the self-assembled BTO/Ti₃C₂T _x heterojunction is incorporated into the PVDF matrix. Benefiting from the internal electric field induced by the spontaneously ferroelectric polarization of BTO, the photoexcited electrons and holes are driven to move in the opposite direction inside BTO, and the electrons are transferred to Ti₃C₂T _x across the Schottky interface. Thus, directed charge separation and transfer are realized through the cooperation of the two components. The recombination of electron-hole pairs is maximumly inhibited, which notably improves the yield of reactive oxygen species by enhancing photocatalytic activity. Furthermore, the nanofiber membrane with an optimal doping ratio exhibits outstanding visible light absorption and photothermal conversion performance. Ultimately, photothermal effect and ferroelectric polarization enhanced photocatalysis endow the nanofiber membrane with the ability to kill 99.61% ± 0.28% Staphylococcus aureus and 99.71% ± 0.16% Escherichia coli under 20 min of light irradiation. This study brings new insights into the design of intelligent antibacterial textiles through a ferroelectric polarization strategy.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s42765-022-00234-8.

Cellular messengers involved in the inhibition of the Arabidopsis primary root growth by bacterial quorum-sensing signal N-decanoyl-L-homoserine lactone

BACKGROUND

N-acyl-homoserine lactones (AHLs) are used as quorum-sensing signals by Gram-negative bacteria, but they can also affect plant growth and disease resistance. N-decanoyl-L-homoserine lactone (C10-HSL) is an AHL that has been shown to inhibit primary root growth in Arabidopsis, but the mechanisms underlying its effects on root architecture are unclear. Here, we investigated the signaling components involved in C10-HSL-mediated inhibition of primary root growth in Arabidopsis, and their interplay, using pharmacological, physiological, and genetic approaches.

RESULTS

Treatment with C10-HSL triggered a transient and immediate increase in the concentrations of cytosolic free Ca²⁺ and reactive oxygen species (ROS), increased the activity of mitogen-activated protein kinase 6 (MPK6), and induced nitric oxide (NO) production in Arabidopsis roots. Inhibitors of Ca²⁺ channels significantly alleviated the inhibitory effect of C10-HSL on primary root growth and reduced the amounts of ROS and NO generated in response to C10-HSL. Inhibition or scavenging of ROS and NO neutralized the inhibitory effect of C10-HSL on primary root growth. In terms of primary root growth, the respiratory burst oxidase homolog mutants and a NO synthase mutant were less sensitive to C10-HSL than wild type. Activation of MPKs, especially MPK6, was required for C10-HSL to inhibit primary root growth. The mpk6 mutant showed reduced sensitivity of primary root growth to C10-HSL, suggesting that MPK6 plays a key role in the inhibition of primary root growth by C10-HSL.

CONCLUSION

Our results indicate that MPK6 acts downstream of ROS and upstream of NO in the response to C10-HSL. Our data also suggest that Ca²⁺, ROS, MPK6, and NO are all involved in the response to C10-HSL, and may participate in the cascade leading to C10-HSL-inhibited primary root growth in Arabidopsis.

Research on Driving Fatigue Alleviation Using Interesting Auditory Stimulation Based on VMD-MMSE

The accurate detection and alleviation of driving fatigue are of great significance to traffic safety. In this study, we tried to apply the modified multi-scale entropy (MMSE) approach, based on variational mode decomposition (VMD), to driving fatigue detection. Firstly, the VMD was used to decompose EEG into multiple intrinsic mode functions (IMFs), then the best IMFs and scale factors were selected using the least square method (LSM). Finally, the MMSE features were extracted. Compared with the traditional sample entropy (SampEn), the VMD-MMSE method can identify the characteristics of driving fatigue more effectively. The VMD-MMSE characteristics combined with a subjective questionnaire (SQ) were used to analyze the change trends of driving fatigue under two driving modes: normal driving mode and interesting auditory stimulation mode. The results show that the interesting auditory stimulation method adopted in this paper can effectively relieve driving fatigue. In addition, the interesting auditory stimulation method, which simply involves playing interesting auditory information on the vehicle-mounted player, can effectively relieve driving fatigue. Compared with traditional driving fatigue-relieving methods, such as sleeping and drinking coffee, this interesting auditory stimulation method can relieve fatigue in real-time when the driver is driving normally.