Synthesis and application of Fe3O4/SiO2/thermosensitive/PAMAM-CS nanoparticles as a novel adsorbent for removal of tamoxifen from water samples

Modeling of the Adsorption of Tigecycline from Water on CoFe2O4-Graphene Nanocomposites

A CoFe2O4(11.04%)-graphene (5.45%) nanocomposite was synthesized and characterized by spectroscopic techniques. This nanocomposite was used to eliminate tigecycline antibiotics from the water. The adsorbent showed 160.0 mg/g adsorption capacity of tigecycline antibiotic at 175 mg/L tigecycline, 0.75 g/L dose, 100 min of contact time, and a temperature of 25 °C. One-, two-, and three-parameter models were applied, i.e., Henry, Langmuir, Freundlich, D-R, Temkin, Flory-Huggins, Halsey, Jovanovich, Redlich-Peterson, and Sips models. According to statistical data, Langmuir and Sips models were the best fitted. The adsorption was spontaneous thermodynamically following pseudo-second-order kinetics. The adsorption occurred via a combination of intraparticle diffusion and external mass transfer mechanisms. The supramolecular mechanism showed the adsorption of the tigecycline antibiotic via coordination and π-π stacking bonds. The characterization results showed that the average nanoparticle size obtained was 91.45 nm. The removal efficiency of the adsorbent reduced up to the fifth cycle and later became constant at 50%. Hence, CoFe2O4-graphene nanocomposites propose a highly effective and recyclable solution for water treatment through adsorption, and hence, this method may be used to remove tigecycline antibiotics from water bodies.

Magnetic Poly(Amidoamine) Dendrimer for the Dispersive Solid Phase Extraction of Nitrophenols from Environmental Water Samples

A fast and simple dispersive solid phase extraction method is described for nitrophenols determination in water samples by using gas chromatography-nitrogen phosphorous detector. Firstly, the Poly(amidoamine) grafted Fe3O4 magnetic nanoparticles were synthesized in different generations by successive addition of butyl acrylate and ethylenediamine. After characterization, the prepared dendrimer was utilized as an adsorbent for magnetic solid phase extraction of 2-nitrophenol, 3-nitrophenol, and 4-nitrophenol to benefit large number of surface amine interaction sites. The effects of the different parameters influencing the sample preparation efficiency were investigated. The proposed method showed linearity in the ranges of 0.04-700 and 0.05-700 µg/dm3 for nitrophenols. The obtained limits of detection and quantification under optimized conditions were 0.01-0.02 and 0.04-0.05 µg/dm3, respectively. The relative standard deviations (n = 5) were less than 3.8% (at 10 µg/dm3). Moreover, the calculated enrichment factors were above 200. In addition, the relative recoveries for a spiked river water sample were satisfactory.

Superior adsorption and removal of doxorubicin from aqueous solution using activated carbon via thermally treated green adsorbent: isothermal, kinetic, and thermodynamic studies

Activated carbon from apricot seeds (ASAC) was successfully made using a low-cost, straightforward synthesis process. With the use of various instruments, including XRD, XPS, FT-IR, SEM, and TEM, the adsorbent was demonstrated. The surface area of the ASAC that was given was also shown to be 436.8 m2/g. It was discovered that the synthesized ASAC has a fantastic capacity to absorb the anti-cancer medication doxorubicin hydrochloride (DOX). Based on changes in temperature, pH, and DOX concentration, The DOX adsorption behaviour's mechanism was evaluated. The adsorption capacity of ASAC for DOX was greater at pH 6.0, according to experimental data as the adsorption capacity was discovered to be 951.13 mg/g. Adsorption equilibrium analysis revealed that, when compared to the other models, the Langmuir adsorption provided the best fit to the data that were collected. Additionally, The ASAC has validated the DOX activation energy of adsorption as a chemisorption technique. The kinetics of adsorption were shown to be fitted to pseudo-second-order kinetic model. The reaction was endothermic and spontaneous, according to thermodynamic data. Innvestigation the removal efficiency of ASAC to remove DOX from real watrer sample (tap water, effluent wastewater, and impact wastewater). It was suggested by the results that ASAC was a viable option for treating wastewater and adsorbing DOX. The synthesized ASAC has noteworthy cyclability and reusability characteristics due to its high efficiency (up to five cycles) and low cost (around 86 percent).

Synthesis of a novel functionalized biosorbent from mango stone and its application in the pharmaceutical's removal from water and a synthetic mixture

This paper explores the feasibility of functionalizing mango stones with iron oxide magnetic nanoparticles (MS-Fe3O4) by coprecipitation in batch adsorption processes. The synthesized material was characterized and applied in chloroquine (CQN) and sertraline hydrochloride (SER) removal from contaminated waters. The biosorbent was subjected to a regenerative study and treatment using a synthetic mixture of contaminants to evaluate its applicability in real effluents. The biosorbent was analyzed by transmission electron microscopy images, scanning electron microscopy, dispersive X-ray spectroscopy, Fourier transform infrared spectra, and zeta potential to characterize its chemical and morphology properties. The techniques applied showed the effectiveness of the proposed modification. In the adsorption experiments, the optimal adsorbent dosage was 0.01 g for both contaminants. The pH strongly influenced the adsorption of the drugs on MS-Fe3O4, and the best results were obtained in the pH range of 5-6. Kinetic data showed a better fit to the pseudo-second-order model, and the equilibrium time was achieved in 16 h for CQN and 4 h for SER. Isotherm studies revealed maximum adsorptive capacities of 49.42 and 64.79 mg g-1, respectively, for CQN and SER, at 318 K, demonstrating that the increase in temperature is a favorable factor, and the Sips model better describes the process. The thermodynamic parameters indicate an endothermic (ΔH° >0), spontaneous (ΔG° <0), and reversible (ΔS° >0) nature of the adsorption. This process is essentially governed by physical forces, such as hydrogen and π-π bonds. However, it is also valid to consider the presence of electrostatic forces due to the ionizing nature of CQN and SER. The MS-Fe3O4 biosorbent showed good performance when evaluated in a synthetic mixture of four contaminants, with an overall removal efficiency of approximately 86% and the regenerative capacity of three reusing cycles.

Construction of an allophane-based molecularly imprinted polymer for the efficient removal of antibiotic from aqueous solution

The widespread presence of ciprofloxacin (CIP) antibiotic in the water and soil poses substantial potential risks to the environment, threatening both human and animal health. In this study, we used nanoclay mineral allophane (Allo), β-cyclodextrin (β-CD) as a bifunctional monomer, and sodium alginate as a cross-linking agent, to prepare 3D porous Allo-β-CD molecularly imprinted polymers (MIPs) for the efficient removal of CIP from aqueous solution. The prepared Allo-β-CD MIP was characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and zeta potential measurements. The effects of initial concentration, time, pH level, and ion concentration on CIP removal dynamics were systematically studied. The adsorption kinetics and equilibrium data of CIP were well-fitted by the pseudo-second-order kinetic model and Langmuir isotherm models, respectively. The Allo-β-CD MIP can efficiently remove CIP from an aqueous solution, with a maximal adsorption capacity of 635 mg/g. It also has impressive recyclability, and enhanced selectivity, and is widely adaptable to various environmental conditions. The adsorption mechanisms of the as-prepared adsorbent include H bonds, hydrophobic interactions, surface complexation, and n-π EDA interactions. Given the experimental evidence, as-prepared adsorbent is therefore a promising candidate for the effective removal of CIP from the aquatic environment.

Fabricating modified carbon sesame straw for adsorption of acetaminophen and ibuprofen from aqueous media: isotherm and kinetic models

As acetaminophen (ACT) and ibuprofen (IBP) have serious environmental impacts, despite their widespread use in many countries, the present research examined the effectiveness of activated carbon made from straw and sesame stubble in removing ACT and IBP from water. To that end, the as-synthesized adsorbent was functionalized using zinc chloride. The maximum adsorption capacities were found to be 51.7 mg g-1 for ACT and 63.7 mg g-1 for IBP. The adsorption kinetics and isotherm results showed that the pseudo-second-order (PSO) kinetics and Langmuir isotherm fit the data obtained from this study better than the other experimental models do. Also, the adsorption reached equilibrium within 120 min, and the optimal adsorbent dose and temperature were obtained as 1.0 mg and 25 °C, respectively. The mechanisms involved in the adsorption process would include acid-base, hydrogen bonding, electrostatic forces, and π-π interaction. Reusability studies revealed that the adsorbent still preserved about 89% and 82% of the adsorption performance for ACT and IBP, respectively, after seven repeated adsorption cycles. As the findings indicated, CSS/Zn could be accepted as a hopeful adsorbent to be used in pharmaceutical treatment.

Application of Metal-Organic Frameworks for Efficient Removal of Doxorubicin Hydrochloride: Removal Process Optimization and Biological Activity

This study looked at the doxorubicin hydrochloride (DOX) anticancer drug's adsorption characteristics on a silver-based metal-organic framework (Ag-MOF). X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used for the characterization of Ag-MOF. The pore volume and surface area of Ag-MOF were determined through Brunauer-Emmett-Teller (BET) testing at 77 K to be 0.509 cm3/g and 676.059 m2/g, respectively. Adsorption at pH 6 was established to be the best for DOX compared to alkaline solution. Ag-MOF has a good capacity for eliminating DOX (1.85 mmol/g), according to adsorption experiments. From the adsorption results, we can find that Langmuir is the most fitted adsorption isotherm model and the pseudo-second order model best fitted the adsorption kinetics. The energy of activation for adsorption, which was determined to be 15.23 kJ/mol, also supported a chemisorption process. The mechanism of adsorption was evaluated, and details of all possible interactions between DOX and Ag-MOF were illustrated. On the other hand, while examining the impact of temperature, we identified the thermodynamic constraints as ΔG°, ΔH°, and ΔS° and confirmed that the reaction was an endothermic one and spontaneous. Even after numerous reuse cycles, the efficiency remained constant. The synthetic adsorbent was remarkably recyclable at a rate of more than 91.6%. By using the MTT assay, the cytotoxicity of the tested Ag-MOF and DOX@Ag-MOF against human breast cancer cells (MCF-7) was evaluated in vitro. The in vitro antimicrobial activity of Ag-MOF and DOX@Ag-MOF was also tested.

Extensive sorption of Amoxicillin by highly efficient carbon-based adsorbent from palm kernel: Artificial neural network modeling

In the present study, a new sorbent was fabricated from Palm kernel (PK) by dry thermochemical activation with NaOH and characterized by FTIR, X-ray diffraction, FE-SEM and BET, which was used for the Amoxicillin (AMX) sorption from aqueous solution. The influence of effective parameters such as pH, reaction time, adsorbent dosage, AMX concentration and ionic strength on the sorption efficacy of AMX removal were evaluated. The main functional groups on the surface of the magnetic activated carbon of Palm Kernel (MA-PK) were C-C, C-O, C[bond, double bond]O and hydroxyl groups. The specific surface of char, activated carbon Palm Kernel (AC-PK) and MA-PK were 4.3, 1648.8 and 1852.4 m2/g, respectively. The highest sorption of AMX (400 mg/L) was obtained by using 1 g/L of sorbent at solution pH of 5 after 60 min contact time, which corresponding to 98.77%. Non-linear and linear models of isotherms and kinetics models were studied. The data fitted well with Hill isotherm (R2 = 0.987) and calculated maximum sorption capacity were 719.07 and 512.27 mg/g from Hill and Langmuir, respectively. A study of kinetics shows that the adsorption of AMX follows the Elovich model with R2 = 0.9998. Based on the artificial neural network (ANN) modeling, the MA-PK dosage and contact time showed the most important parameters in the removal of AMX with relative importance of 36.5 and 25.7%, respectively. Lastly, the fabricated MA-PK was successfully used to remove the AMX from hospital wastewater.

Heterogeneous Sono-Fenton like catalytic degradation of metronidazole by Fe3O4@HZSM-5 magnetite nanocomposite

In this research, Fe₃O₄@HZSM-5 magnetic nanocomposite was synthesized via a coprecipitation method for metronidazole (MNZ) degradation from aqueous solutions under ultrasonic irradiation which showed superb sonocatalytic activity. The synthesized magnetite nanocomposite was characterized by using field-emission scanning electron microscope-energy dispersive X-ray Spectroscopy, (FESEM-EDS), Line Scan, Dot Mapping, X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET). To investigate the sonocatalytic activity of the Fe₃O₄@HZSM-5 magnetite nanocomposite, the sonocatalytic removal conditions were optimized by evaluating the influences of operating parameters like the dosage of catalyst, reaction time, pH, the concentration of H₂O₂, MNZ concentration, and pH on the MNZ removal. The MNZ maximum removal efficiency and TOC at reaction time 40 min, catalyst dose 0.4 g/L, H₂O₂ concentration 1 mM, MNZ initial concentration 25 mg/L, and pH 7 were achieved at 98% and 81%, respectively. Additionally, the MNZ removal efficiency in the real wastewater sample under optimal conditions was obtained at 83%. The achieved results showed that using Langmuir-Hinshelwood kinetic model K_L-H = 0.40 L mg^-1, K_C = 1.38 mg/L min) can describe the kinetic removal of the process. The radical scavenger tests indicated that the major reactive oxygen species were formed by hydroxyl radicals in the Sono-Fenton-like process. Evaluation of the nanocomposite reusability showed an 85% reduction in the MNZ removal efficiency after seven cycles. Based on the results, it can be concluded that Fe₃O₄@HZSM-5 were synthesized as magnetic heterogeneous nano-catalysts to effectively degrade MNZ, and the observed stability and recyclability demonstrated that Fe₃O₄@HZSM-5 was promising for the treatment of wastewater contaminated with antibiotics.

Synthesis of hyperbranched polyamine dendrimer/chitosan/silica composite for efficient adsorption of Hg(II)

The pollution of water system with Hg(II) exerts hazardous effect to ecosystem and public health. Adsorption is considered to be a promising strategy to remove Hg(II) from aqueous solution. Herein, hyperbranched polyamine dendrimer/chitosan/silica composite (SiO₂-FP) was synthesized for the adsorption of aqueous Hg(II). The adsorption performance of SiO₂-FP was comprehensively determined by considering various influencing factors. SiO₂-FP displays good adsorption performance for Hg(II) with the adsorption capacity of 0.79 mmol·g^-1, which is higher than the corresponding chitosan functionalized silica (SiO₂-CTS) by 46.30 %. The optimal solution pH for the adsorption of Hg(II) is 6. Adsorption kinetic indicates the adsorption for Hg(II) can reach equilibrium at 250 min. Adsorption kinetic process can be well fitted by pseudo-second-order (PSO). Adsorption isotherm reveals the adsorption for Hg(II) can be promoted by increasing initial Hg(II) concentration and adsorption temperature. The adsorption isotherm indicates the adsorption process can be described by Langmuir model and the adsorption is a spontaneous, endothermic and entropy-increased process. SiO₂-FP displays excellent adsorption selectivity and can 100 % adsorb Hg(II) with the coexisting of Ni(II), Zn(II), Pb(II), Mn(II), and Co(II). Adsorption mechanism demonstrates -NH-, -NH₂, CN, CONH, -OH, and CO participated in the adsorption. SiO₂-FP exhibits good regeneration property and the regeneration rate can maintain approximately 90 % after five adsorption-desorption cycles.

In vitro evaluation of copper sulfide nanoparticles decorated with folic acid/chitosan as a novel pH-sensitive nanocarrier for the efficient controlled targeted delivery of cytarabine as an anticancer drug

Nanoparticles (NPs) have gained more attention as drug delivery systems. Folic acid (FA)-chitosan (CS) conjugates, because of their biodegradability, low toxicity, and better stability, offer a pharmaceutical drug delivery tool. The aim of this work was to fabricate CuS NPs modified by CS followed by grafting FA as a nanocarrier for the delivery of cytarabine (CYT) as an anticancer drug. In this work, CuS NPs modified by CS and FA were successfully synthesized. The structural properties of the nanocarrier were characterized by using scanning electron microscopy, Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, and Brunauer-Emmett-Teller. The adsorption mechanism of CYT by adsorption isotherms, kinetics, and thermodynamics was deliberated and modeled. The in vitro CYT release behavior for the nanocarrier was 99% and 61% at pH 5.6 and 7.4, respectively. The adsorption behavior of CYT by CuS NP_s -CS-FA was well explored by pseudo-second-order kinetic and Langmuir isotherm models by the coefficient of determination (R² > 0.99). Thermodynamic results showed that the uptake of CYT by CuS NPs-CS-FA was endothermic and spontaneous. The experimental results showed that CYT/CuS NP_s -CS-FA can be proposed as an efficient nanocarrier for the targeted delivery of anticancer drugs.

Fabricating of Fe3O4@Ag-MOF nanocomposite and evaluating its adsorption activity for removal of doxorubicin

The purpose of this research was to investigate the doxorubicin (DOX) adsorption behavior on Fe3O4@Ag-Metal Organic Framework (Fe₃O₄@Ag-MOF). This adsorbent was effectively prepared using a simple synthetic process. Many instruments, including FTIR, XRD, SEM, TEM, and XPS, were used to characterized the new Fe₃O₄@Ag-MOF. Additionally, the presented Fe₃O₄@Ag-surface MOF's area was shown to be 586.06 m2/g with a size of around 43 nm. The composite that was made has magnetic properties that were quite strong (63.3 emu/g). The produced Fe₃O₄@Ag-MOF was discovered to have a fantastic ability to adsorb the anti-cancer drug DOX, with a 1.72 mmol/g (934.85 mg/g) adsorption capacity. On the basis of changes in temperature, pH, and DOX concentration, the DOX adsorption behavior mechanism was investigated. The adsorption capacity of Fe₃O₄@Ag-MOF for DOX was greater at pH 7.0, according to experimental data. The adsorption equilibrium also demonstrated that the Langmuir adsorption was regulated the best fit to the extracted data compared with the other models. Additionally, the activation energy of adsorption for DOX onto Fe₃O₄@Ag-MOF was determined, indicating the chemisorption process. The adsorption kinetics was shown in the well-known kinetic model of the pseudo-second-order. The adsorption thermodynamic measurements were documented according to according to the enthalpy (ΔH°), entropy(ΔS°), and Gibbs free energy (ΔG°) parameters demonstrated that the reaction was endothermic and spontaneous thermodynamic. The adsorption of DOX onto Fe₃O₄@Ag-MOF from real water samples (tap water, effluent wastewater, and influence wastewater) were investigated. It's interesting that the synthetic adsorbent had great recyclability 72.6 percent in the fifth cycle indicating that it was highly recyclable. After adsorption, the typical Fe₃O₄@Ag-MOF XRD peak intensities and locations were mostly unchanged throughout adsorption indicates the crystalline phase remained steady. The results indicated that Fe₃O₄@Ag-MOF were a good candidate for adsorbing the DOX and treating wastewater.

Chemical Strategies for Dendritic Magneto-plasmonic Nanostructures Applied to Surface-Enhanced Raman Spectroscopy

Chemical analyses in the field using surface-enhanced Raman scattering (SERS) protocols are expected to be part of several analytical procedures applied to water quality monitoring. To date, these endeavors have been supported by developments in SERS substrate nanofabrication, instrumentation portability, and the internet of things. Here, we report distinct chemical strategies for preparing magneto-plasmonic (Fe3 O4  : Au) colloids, which are relevant in the context of trace-level detection of water contaminants due to their inherent multifunctionality. The main objective of this research is to investigate the role of poly(amidoamine) dendrimers (PAMAMs) in the preparation of SERS substrates integrating both functionalities into single nanostructures. Three chemical routes were investigated to design magneto-plasmonic nanostructures that translate into different ways for assessing SERS detection by using distinct interfaces. Hence, a series of magneto-plasmonic colloids have been characterized and then assessed for their SERS activity by using a model pesticide (thiram) dissolved in aqueous samples.

Removal efficiency of As(III) from aqueous solutions using natural and Fe(III) modified bentonites

Contamination of water with arsenic is a major global health problem. The use of adsorbent materials for the removal of As from aqueous systems is a plausible solution to this problem. In this work, the use of commercial bentonites (purified and modified with iron (III)) for the removal of As from water was studied. The samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier Transformed Infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and nitrogen adsorption/desorption isotherms to determine their physicochemical properties. The arsenic removal capacities of adsorbent materials were studied from 1 mg/L solutions of As (III) using the colorimetric technique of molybdenum blue. High adsorption capacity (0.33 mg/g) of As (III) was obtained in aqueous systems after 1 h of treatment with unmodified bentonite. The incorporation of iron improved the removal performance in short times. The obtained results could be the starting point for the development of a low-cost filtration system that contributes to solve the problem of arsenic in water.

Synthesis of ferroferric oxide@silicon dioxide/cobalt-based zeolitic imidazole frameworks for the removal of doxorubicin hydrochloride from wastewater

Due to its low-cost, eco-friendliness and easy mode of separation biosynthesized magnetic ferroferric oxide (Fe₃O₄) can be successfully used for the removal of organic contaminants from wastewater. However, there are some challenges that to date have limited this compound's practical removal efficiency. Thus, in this study, a cobalt-based zeolitic imidazole frameworks (ZIF-67) coated biosynthesized ferroferric oxide@silicon dioxide (Fe₃O₄@SiO₂) magnetic composite (Fe₃O₄@SiO₂/ZIF-67) was prepared to address these issues and subsequently used to remove doxorubicin hydrochloride (DOX). Characterization results showed that the fabricated composite exhibited significant magnetic properties (16.1 emu·g^-1) with a size ranging between 50 and 250 nm. The amount of DOX adsorbed by the composite (90.7 mg·g^-1) was much higher than either of the component parts, which were only 35.7 and 82.5 mg·g^-1 for Fe₃O₄@SiO₂ and ZIF-67 respectively. This indicated enhanced DOX adsorption by Fe₃O₄@SiO₂/ZIF-67. The DOX adsorption best fit a pseudo-second order kinetic and Langmuir adsorption model. These studies suggested that the DOX adsorption mechanism involved a combination of electrostatic interactions, π-π stacking, hydrogen bonding and pore filling. Regeneration and application studies, exposing Fe₃O₄@SiO₂/ZIF-67 to real water samples, practically demonstrated that Fe₃O₄@SiO₂/ZIF-67 with propensity for magnetic separation and recycle is a promising nanomaterial for DOX removal.

Magnetite graphene oxide modified with β-cyclodextrin as an effective adsorbent for the removal of methotrexate and doxorubicin hydrochloride from water

The purpose of this investigation was to analyze the performance of magnetite graphene oxide modified with β-cyclodextrin (GO@Fe₃O₄@β-CD) for adsorption of methotrexate (MTX) and doxorubicin (DOX) from aqueous solutions. Characterization of GO@Fe₃O₄@β-CD was carried out using some methods. The perfect conditions for the adsorption of MTX and DOX were 7.0, 45 min, 20 mg, and 25 °C for solution pH, contact time, adsorbent dose, and temperature, respectively, with removal efficiency values of 97.8% and 98.5% for MTX and DOX, respectively. The adsorption kinetic of MTX and DOX via GO@Fe₃O₄@β-CD followed pseudo second-order (PSO) model, while the adsorption isotherm obeyed Langmuir model by monolayer adsorption with maximum adsorption capacities of 198.5 and 204.5 mg g^-1 for MTX and DOX, respectively. Therefore, it could be argued that HCl and 0.1 mol L^-1 NaOH would reflect adequate elution properties for GO@Fe₃O₄@β-CD recovery.

Direct Synthesis of Sulfur-Decorating PAMAM Dendrimer/Mesoporous Silica for Enhanced Hg(II) and Cd(II) Adsorption

Water security caused by heavy metals poses a deleterious hazard to public health and the ecological system. The construction of adsorbents by polyamidoamine (PAMAM) dendrimers for efficient removal of metal ions has attracted considerable interest. However, the general method for the fabrication of these adsorbents was achieved by the surface chemical modification of the substrates with PAMAM dendrimer, which usually causes the defects of low density and uneven distribution of the dendrimer, the blocking of pores, and reducing the adsorption performance. Hence, the development of a new method for preparation of PAMAM dendrimer-based adsorbent to realize the efficient and enhanced adsorption of metal ions is still a challenge. Herein, methylisothiocyanate decorated PAMAM dendrimer/mesoporous silica composites (G0-S-1/x, G1.0-S-1/x, G2.0-S-1/x, x = 2, 4, 6, 8, 10) were synthesized by the direct sol-gel reaction of alkoxysilyl-containing functional PAMAM dendrimer. The adsorbents display enhanced adsorption property for Hg(II) and Cd(II) as compared with the same adsorbents which were prepared by traditional chemical modification method. Take G2.0-S-1/2 as an example, the maximum adsorption capacities are 2.41 and 0.87 mmol·g^-1 for Hg(II) and Cd(II), respectively . Moreover, the adsorbents show excellent selective adsorption and regeneration property. G2.0-S-1/2 displays distinct selectivity for Hg(II) with the presence of Co(II), Pb(II), Cd(II), and Cu(II). The regeneration percentage still maintains 95.2% after five adsorption-desorption cycles. The adsorption mechanism is also certified by the experimental method and theoretical calculation.

Thermo/glutathione-sensitive release kinetics of heterogeneous magnetic micro-organogel prepared by sono-catalysis

To improve the loading and delivery for hydrophobic drugs and optimize the release efficiency in tumor microenvironment, a novel core-shell magnetic micro-organogel carrier was successfully prepared by a sono-catalysis process in the study. As-synthesized magnetic micro-organogel had an appropriate dispersibility in water owing to the hydrophilicity of protein shell and could be kept steadily with a well-defined spherical morphology owing to the three-dimensional gel structure of oil core, and it promised an accessible targeted drug delivery owing to its good magnetism-mediated motion ability. Moreover, the magnetic micro-organogel showed a high loading efficiency up to 94.22% for coumarin 6 which was dissolved into the micro-organogel as a model hydrophobic drug. More importantly, the release kinetics revealed that the magnetic micro-organogel had a thermo-sensitive and glutathione (GSH)-sensitive ability to control the drug release, and proved that its release mechanisms referred to the combination of erosion, diffusion and degradation.

Preparation of mesoporous batatas biochar via soft-template method for high efficiency removal of tetracycline

In this contribution, we apply a soft-template-assisted hydrothermal route using polyethylene-polypropylene glycol (F127) as soft-template agent and biomass batatas as carbon precursor to synthesis a novel hydrothermal mesoporous biochar (HMC-800) for adsorptive removal of tetracycline (TC) from wastewater. We use the biochar prepared without F127 and direct pyrolytic biochar for comparison. The physicochemical properties of all the studied biochar samples are measured using a suite of characterization techniques. Our results show that the HMC-800 displays the highest specific surface area (286.3 m²/g) and total pore volume (0.249 cm³/g), manifesting the introduction of F127 can result in formation of well-developed pore structures. Regarding adsorption properties, the HMC-800 outperforms other biochar samples for TC removal. Our finding shows that solution with near-neutral pH is favorable for TC removal, and the highest adsorption capacity is observed at initial solution pH value 7. In addition, our findings show that applying the pseudo-second-order kinetic and Freundlich isotherm equation closely models the recorded adsorption behavior. The maximum adsorption capacity is measured to be as much as 238.7 mg/g by Langmuir isotherm model. Pore filling, hydrogen-bonding and n-π interaction are suggested to be the prevailing adsorption mechanisms compared to the other mechanisms. Furthermore, the HMC-800 performs better in regeneration and reuse experiments, making it a promising adsorbent material for TC removal from wastewater.

Removal of lead ions by two FeMn oxide substrate adsorbents

Lead pollution has become a global concern due to its ubiquity and persistence. This study describes two FeMn oxide substrate adsorbents, namely, FeMn binary oxides (FMBO) and mesoporous FeMn binary oxide (MFMBO) covered with tannic acid film (FMBO@TA-Fe³⁺ and MFMBO@TA-Fe³⁺), for the treatment of Pb²⁺ in water. The characterization results showed that TA was successfully coated onto the surfaces of FMBO and MFMBO. The maximum capacities of Pb²⁺ on FMBO@TA-Fe³⁺ and MFMBO@TA-Fe³⁺ were 322.08 and 357.14 mg g^-1, respectively, which were twice those of FMBO and MFMBO. The adsorption of Pb²⁺ on the adsorbents was a spontaneous, endothermic process with increasing disorder through thermodynamics studies. An overall mechanism was proposed for Pb²⁺ adsorption, the improved adsorption performance of FMBO@TA-Fe³⁺ and MFMBO@TA-Fe³⁺ is ascribed to the mesoporous characteristics and the introduction of hydroxyl groups. Further investigation indicated the adsorption of Pb²⁺ could be attributed to electrostatic interactions on FMBO@TA-Fe³⁺ and MFMBO@TA-Fe³⁺, and cation exchange existed through the formation of these internal surface complexes. The Pb²⁺-loaded adsorbents could be effectively desorbed in a dilute hydrochloric acid solution, promoting recycling and reuse of the regenerated adsorbents. These results warrant the promising application of FMBO@TA-Fe³⁺ and MFMBO@TA-Fe³⁺ for the removal of Pb²⁺, and this work first proposed TA film-modified FMBO and MFMBO to improve its adsorption capacity in the application of environmental remediation.

A comprehensive study on the application of FeNi3@SiO2@ZnO magnetic nanocomposites as a novel photo-catalyst for degradation of tamoxifen in the presence of simulated sunlight

Pharmaceutical compounds at trace concentrations are found in the environment, especially in drinking water and food, posing significant negative effects on humans as well as on animals. This paper aimed to examine the diagnostic catalytic properties and efficacy of a novel synthesized photocatalyst, namely FeNi₃@SiO₂@ZnO magnetic nanocomposite, for the removal of tamoxifen (TMX) from wastewater under simulated sunlight. According to the results, it was found that TMX was completely degraded operating under optimized conditions (i.e. pH = 7, catalyst dose = 0.01 g/L, initial TMX concentration = 20 mg/L and reaction time = 60 min). The reaction kinetics of TMX degradation followed a pseudo-first order kinetics model. The final by-products from the TMX photodegradation were water, carbon dioxide, acetic acid, nitroacetic acid methyl ester, 2-methyl-2-pentenal, and 4-methyl-2-pentanol. In addition, the synthesized photocatalyst could successfully performed five consecutive photodegradation cycles. The obtained results revealed that the synthesized FeNi₃@SiO₂@ZnO magnetic nanocomposite holds a great potential to be applied as a photocatalyst for the degradation of TMX on an industrial scale.

Solvothermal synthesis and characterization of novel [Ni(ii)(Tpy)(Pydc)]·2H2O metal–organic framework as an adsorbent for the uptake of caffeine drug from aqueous solution

[Ni(ii)(Tpy)(Pydc)]·2H₂O metal–organic framework is capable of adsorbing 98.4 mg g⁻¹ of caffeine at 30 °C, pH 4 for 1 hour.