Molecularly imprinted monolithic column based on functionalized β-cyclodextrin and multi-walled carbon nanotubes for selective recognition of benzimidazole residues in citrus samples

Advances on multiclass pesticide residue determination in citrus fruits and citrus-derived products - A critical review

The application of agrochemicals in citrus fruits is widely used to improve the quality of crops, increase production yields, and prolong post-harvest life. However, these substances are potentially toxic for humans and the ecosystem due to their widespread use, high stability, and bioaccumulation. Conventional techniques for determining pesticide residues in citrus fruits are chromatographic methods coupled with different detectors. However, in recent years, the need for analytical strategies that are less polluting for the environment has encouraged the appearance of new alternatives, such as sensors and biosensors, which allow selective and sensitive detection of pesticide residues in real time. A comprehensive overview of the analytical platforms used to determine pesticide residues in citrus fruits and citrus-derived products is presented herein. The review focuses on the evolution of these methods since 2015, their limitations, and possible future perspectives for improving pesticide residue determination and reducing environmental contamination.

Preparation of rutin imprinted monolith (RIM) by using porogen containing ion liquid [BMIM]PF6 and its molecular recognition

A [BMIM]PF6 ion liquid (IL)-assisted synthesis of a rutin imprinted monolith (RIM) was carried out in an in-situ polymerization method. Bi-functional monomers and a ternary porogen containing IL was used for the RIM preparation and a L9(33) orthogonal factor design performed. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR) and N2 adsorption method was for structural characterization of the RIMs. The monolith was directly used as stationary phase in liquid chromatography to test the retention selectivity, adsorption capacity and extraction application. The optimized porogen consists of 900 μL DMF, 144 μL ACN and 216 μL IL. The monolith RIM-13 obtained under the optimized conditions possessed improved adsorption performance, with a dynamic adsorption capacity of 6.695 mg/g, an imprinting efficiency of 4.841 and a selectivity α value of 4.821. Additionally, this monolith had also higher specific surface area, pore volume and permeability than that obtained without IL and the homogeneity of the imprint sites could be improved by using IL. When the RIM-13 was applied to the separation and purification of rutin from tartary buckwheat, a rutin product with a purity higher than 92 % can be obtained by one cycle. This molecular imprint solid-phase extraction (MI-SPE) is of potency to be applied to preparative-scale separation of other natural products.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

Construction of an allophane-based molecularly imprinted polymer for the efficient removal of antibiotic from aqueous solution

The widespread presence of ciprofloxacin (CIP) antibiotic in the water and soil poses substantial potential risks to the environment, threatening both human and animal health. In this study, we used nanoclay mineral allophane (Allo), β-cyclodextrin (β-CD) as a bifunctional monomer, and sodium alginate as a cross-linking agent, to prepare 3D porous Allo-β-CD molecularly imprinted polymers (MIPs) for the efficient removal of CIP from aqueous solution. The prepared Allo-β-CD MIP was characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and zeta potential measurements. The effects of initial concentration, time, pH level, and ion concentration on CIP removal dynamics were systematically studied. The adsorption kinetics and equilibrium data of CIP were well-fitted by the pseudo-second-order kinetic model and Langmuir isotherm models, respectively. The Allo-β-CD MIP can efficiently remove CIP from an aqueous solution, with a maximal adsorption capacity of 635 mg/g. It also has impressive recyclability, and enhanced selectivity, and is widely adaptable to various environmental conditions. The adsorption mechanisms of the as-prepared adsorbent include H bonds, hydrophobic interactions, surface complexation, and n-π EDA interactions. Given the experimental evidence, as-prepared adsorbent is therefore a promising candidate for the effective removal of CIP from the aquatic environment.

A sensitive fluorescent assay based on gold-nanoclusters coated on molecularly imprinted covalent organic frameworks and its application in malachite green detection

Malachite green (MG), as a parasiticide, is widely used in aquaculture to increase the production of the fishery industry. It poses a great danger to both the food system and the human body. In this study, a one-pot reverse microemulsion polymerization was employed to combine the gold nanoclusters (AuNCs) with molecularly imprinted polymers (MIPs) and covalent organic frameworks (COFs) to synthesize an efficient fluorescent hybrid probe (AuNCs@COFs@MIPs) for selective detection of MG. The specific recognition of AuNCs@COFs@MIPs towards MG triggers the fluorescence quenching of AuNCs. The fluorescent response was linearly related to the concentration over the range of 10-150 nmol/L with a limit of detection of 2.78 nmol/L. In addition, the proposed probe was further applied to fish and water samples. A favorable recovery ranged from 97.34 to 101.51 % toward trace amounts of MG indicating its promising application for detecting residue of veterinary drugs.

Review of Characteristics and Analytical Methods for Determination of Thiabendazole

Thiabendazole (TBZ) is a fungicide and anthelmintic drug commonly found in food products. Due to its toxicity and potential carcinogenicity, its determination in various samples is important for public health. Different analytical methods can be used to determine the presence and concentration of TBZ in samples. Liquid chromatography (LC) and its subtypes, high-performance liquid chromatography (HPLC) and ultra-high-performance liquid chromatography (UHPLC), are the most commonly used methods for TBZ determination representing 19%, 18%, and 18% of the described methods, respectively. Surface-enhanced Raman spectroscopy (SERS) and fluorimetry are two more methods widely used for TBZ determination, representing 13% and 12% of the described methods, respectively. In this review, a number of methods for TBZ determination are described, but due to their limitations, there is a high potential for the further improvement and development of each method in order to obtain a simple, precise, and accurate method that can be used for routine analysis.

A simple co-precipitation sorbent-based preconcentration method for the analysis of fungicides in water and juice samples by high-performance liquid chromatography coupled with photodiode array detection

A magnesium hydroxide co-precipitation sorbent-based method in the presence of an anionic surfactant (e.g., sodium dodecylbenzenesulfonate) and high-performance liquid chromatography were used to preconcentrate and analyze fungicides in water and apple juice samples. The preconcentration procedure can be accomplished in a single step based on the co-precipitation of target fungicides and magnesium chloride in the presence of surfactant in a sodium hydroxide solution (pH 11) and a white precipitate gel was simply obtained after centrifugation. The property of precipitate phase was subsequently characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffractometry. Under the optimum conditions, the developed method exhibited good sensitivity, with an enrichment factor of 11–18 and limits of detection of approximately 1–5 μg/L for water samples and 7–10 μg/L for apple juices. High reproducibility was achieved with a relative standard deviation of less than 11%, and a good recovery range of 72% to 120% was also obtained. The proposed method was shown to be a simple preconcentration procedure for concentrating fungicides in the samples investigated.

[Determination of four fungicides in water by magnetic solid phase extraction-ultrahigh performance liquid chromatography-tandem mass spectrometry using covalent organic framework material]

Fungicides can lead to soil and plant diseases after long-term enrichment in the environment; they can also penetrate deeper into the soil and groundwater by rainwater or irrigation, threatening the water environment and human health. Therefore, it is crucial to develop a simple, rapid, efficient, and sensitive analytical method for the detection of fungicides in the water environment. Sample pretreatment is important for the extraction and enrichment of pollutants from environmental water. Magnetic solid phase extraction (MSPE) is a new sample pretreatment method, which uses magnetic materials as adsorbents dispersed in solution, and rapid separation can be achieved by the aid of external magnets. Because of its advantages of short analytical time, less organic solvent consumption, and easy separation of adsorbents, MSPE has attracted much attention. The key to MSPE is the preparation of highly selective magnetic adsorbents. Covalent organic frameworks have the advantages of large surface area, good chemical and thermal stability, tunable porous structure, low density, and easy functionalization, all of which are ideal for adsorbing fungicides. The concentration of fungicides in environmental water is low. Ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) has high sensitivity and high selectivity, which is suitable for the analysis of fungicides. In this work, a magnetic covalent organic framework Fe₃O₄@TpBD was prepared by an in situ method, as the MSPE sorbent material to enrich of benzimidazole fungicides (thiabendazole, carbendazim, fuberidazole) and organic sulfur fungicide (isoprothiolane) in environmental water. An extraction method based on π-π conjugation, hydrogen bonding, and electrostatic interaction between Fe₃O₄@TpBD and the fungicides, in combination with UHPLC-MS/MS, was developed for the determination of four trace fungicides in water. Transmission electron microscopy (TEM), X-ray diffractometry (XRD), and Fourier transform-infrared spectroscopy (FT-IR) were performed to confirm the successful synthesis of Fe₃O₄@TpBD and to characterize this material. A series of experiments were carried out to decide the optimal extraction conditions, i. e., the magnetic ratio and dosage of Fe₃O₄@TpBD, pH of the water sample, adsorption time, type and volume of the eluent, elution time, and salinity. Gradient elution was carried out with methanol-water as the mobile phase. The target analytes were separated on an ACQUITY UPLC BEH C18 column (100 mm×2.1 mm, 1.7 μm), and multiple reaction monitoring (MRM) was conducted in the positive electrospray ionization mode. The ion source temperature and ion source voltage were set to 500 ℃ and 5 kV, respectively. The analytical method was established under the optimized extraction conditions. The four fungicides showed good linearity in the range of 3-1200 ng/L, with linear correlation coefficients greater than 0.998. The limits of detection (LODs) and limits of quantification (LOQs) of this developed method were 0.06-0.28 ng/L and 0.20-0.92 ng/L, respectively. Recovery tests were performed at three spiked levels of 15, 150, and 600 ng/L, with relative standard deviations of 2.8% to 10.0% (intra-day) and 4.4% to 15.7% (inter-day). The accuracy of the established analytical method was investigated by using it to test real water samples, and satisfactory recoveries for the four analytes were achieved within 77.1% to 119.1%. Trace amounts of carbendazim were detected in the reservoir water at 27.5 ng/L. The method has good sensitivity, accuracy, and precision, and the operation process is convenient.

Functionalized monolithic columns: Recent advancements and their applications for high-efficiency separation and enrichment in food and medicine

The chromatographic column is the core of a high-performance liquid chromatography (HPLC) system, and must have excellent separation efficiency and selectivity. Therefore, functional modification materials for monolithic columns have been rapidly developed. This study is a systematic review of the recently reported functionalized monolithic columns. In particular, the study reviews the types of functional monomers under different modification conditions, as well as the separation and detection techniques combined with chromatography, and their development prospects. In addition, the applications of functionalized monolithic columns in food analysis, biomedicine, and the analysis of active ingredient of Chinese herbal medicines in recent years are also discussed. Also reviewed are the functionalized monolithic columns for qualitative and quantitative analysis. It provided a reference for further development and application of organic polymer monolithic columns.

A New, MWCNT-Based, Solid-State Thiabendazole-Selective Sensor

Direct potentiometric measurements using solid-state sensors have a great potential for thiabendazole (TBZ) determination, considering simplicity, accuracy, and low cost. Modifying the sensing material of the sensor with multi-walled carbon nanotubes (MWCNTs) leads to improved analytical properties of the sensor. In this study, a new potentiometric solid-state sensor for TBZ determination, based on MWCNTs modified with a sulfate group, and TBZ ion as sensing material was developed. The sensor exhibited a Nernstian response for TBZ (60.4 mV/decade of activity) in a working range between 8.6 × 10⁻⁷ and 1.0 × 10⁻³ M. The detection limit for TBZ was 6.2 × 10⁻⁷ M. The response time of the sensor for TBZ was 8 s, and its signal drift was only 1.7 mV/h. The new sensor is applicable for direct potentiometric determination of TBZ in complex real samples, such as fruit peel. The accuracy of TBZ determination is confirmed using the standard addition method.

Matrix solid-phase dispersion based on cucurbit[7]uril-assisted dispersive liquid-liquid microextraction coupled with high performance liquid chromatography for the determination of benzimidazole fungicides from vegetables

A new method involving matrix solid-phase dispersion (MSPD) and dispersive liquid-liquid microextraction (DLLME) was optimized with the aid of stoichiometry and applied to the extraction, purification, and determination of benzimidazole residues in vegetables. Carbendazim, thiabendazole, and thiophanate-methyl were selectively extracted from vegetables using cucurbit[7]uril as the MSPD extractant and transferred to an aqueous solution, then further enriched using DLLME with acetonitrile and chloroform as dispersive and extraction solvents, respectively. The optimal extraction conditions of MSPD and DLLME were selected by two-level full-factorial design and central-composite design (CCD). The developed method (MSPD-DLLME-HPLC-UV) showed good linearity in the range of 0.025-5 μg/g, with R² > 0.9984. Intra- and interday precisions were 5.3-10.9% and 10.6-12.4%, respectively, and the limit of detection was between 0.004 and 0.007 μg/g of fresh weight. This method was applied to the analysis of four different types of vegetables, and the recoveries ranged from 65.4% to 124.0%. The method was environmentally friendly, easy to operate, and sensitive.

Simplified miniaturized analytical set-up based on molecularly imprinted polymer directly coupled to UV detection for the determination of benzoylecgonine in urine

A simple, selective, and sensitive method involving a miniaturized solid phase extraction step based on a monolithic molecularly imprinted polymer (MIP) directly coupled on-line to UV detection was developed for the determination of benzoylecgonine (BZE) in complex biological samples. Monolithic MIPs were prepared into 100 μm internal diameter fused-silica capillaries either by thermal or photopolymerization. While leading to similar selectivities with respect to BZE, photopolymerization has made it possible to produce monoliths of different lengths that can be adapted to the targeted miniaturized application. The homogeneous morphology of these monolithic MIPs was evaluated by scanning electron microscopy prior to measuring their permeability. Their selectivity was evaluated leading to imprinting factors of 2.7 ± 0.1 for BZE and 4.0 ± 0.6 for cocaine (selected as template for the MIP synthesis) with polymers resulting from three independent syntheses, showing both the high selectivity of the MIPs and the reproducibility of their synthesis. After selecting the appropriate capillary length and the set-up configuration and optimizing the extraction protocol to promote selectivity, the extraction of BZE present in human urine samples spiked at 150, 250, and 500 ng mL^-1 was successfully carried out on the monolithic MIP and coupled directly on-line with UV detection. The very clean-baseline of the resulting chromatograms revealing only the peak of interest for BZE illustrated the high selectivity brought by the monolithic MIP. Limits of detection and quantification of 56.4 ng mL^-1 and 188.0 ng mL^-1 were achieved in urine samples, respectively. It is therefore possible to achieve analytical threshold in accordance with the legislation on BZE detection in urine without the need for an additional chromatographic separation.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Green Aspects in Molecularly Imprinted Polymers by Biomass Waste Utilization

Molecular Imprinting Polymer (MIP) technology is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. In the last decades, MIP technology has gained much attention from the scientific world as summarized in several reviews with this topic. Furthermore, green synthesis in chemistry is nowadays one of the essential aspects to be taken into consideration in the development of novel products. In accordance with this feature, the MIP community more recently devoted considerable research and development efforts on eco-friendly processes. Among other materials, biomass waste, which is a big environmental problem because most of it is discarded, can represent a potential sustainable alternative source in green synthesis, which can be addressed to the production of high-value carbon-based materials with different applications. This review aims to focus and explore in detail the recent progress in the use of biomass waste for imprinted polymers preparation. Specifically, different types of biomass waste in MIP preparation will be exploited: chitosan, cellulose, activated carbon, carbon dots, cyclodextrins, and waste extracts, describing the approaches used in the synthesis of MIPs combined with biomass waste derivatives.

Magnetic Fe3O4@SiO2@β-cyclodextrin for solid phase extraction of methyl parathion and fenthion in lettuce samples

In this study, magnetic Fe3O4@SiO2@β-cyclodextrin copolymerized microparticles were synthesized and applied for the extraction of methyl parathion and fenthion in lettuce samples followed by HPLC-UV detection. The magnetic β-cyclodextrin copolymerized microparticles were prepared by dispersion polymerization with acryloyl β-cyclodextrin as the functional monomer and ethylene glycol dimethyacrylate as the crosslinker. The composite magnetic microparticles were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, magnetic measurement, and thermogravimetric analysis, and used as the adsorbent of magnetic solid-phase extraction (MSPE) for methyl parathion and fenthion. The extraction conditions including sample pH and ionic strength, desorption solvent type and volume, and adsorption and desorption times were optimized. Under the optimal extraction conditions, an MSPE-HPLC-UV method was developed for the detection of methyl parathion and fenthion in lettuce. Wide linear ranges of 1.0-200 μg kg-1 (R2 = 0.9998) for methyl parathion and 1.5-200 μg kg-1 (R2 = 0.9978) for fenthion were obtained and the limits of detection were 0.3 μg kg-1 for methyl parathion and 0.5 μg kg-1 for fenthion in lettuce, respectively. The proposed method was applied for the determination of methyl parathion and fenthion in lettuce with satisfactory recoveries between 89.2-101.2%, and relative standard deviations were less than 9.1%. Thus, the MSPE-HPLC-UV method has high accuracy and sensitivity for the analysis of methyl parathion and fenthion in lettuce samples.

History of cyclodextrin-based polymers in food and pharmacy: a review

Cyclodextrins are glucose macrocycles whose inclusional capabilities towards non-polar solutes can be modulated with the help of other macrostructures. The incorporation of cyclodextrin moieties into larger structures produces five types of new materials: crosslinked networks, functionalized chains, amphiphilic cyclodextrins, polyrotaxanes and nanocomposites. This review presents crosslinking and grafting to prepare covalently-attached cyclodextrins, and applications in the food and pharmaceutical sectors, from an historical point of view. In food science, applications include debittering of juices, retention of aromas and release of preservatives from packaging. In biomedical science, cyclodextrin polymers are applied classically to drug release, and more recently to gene delivery and regenerative medicine. The remarkable points are: 1) epichlorohydrin and diisocyanates have been extensively used as crosslinkers since the 1960s, but during the last two decades more complex cyclodextrin polymeric structures have been designed. 2) The evolution of cyclodextrin polymers matches that of macromolecular materials with regard to complexity, functionality and capabilities. 3) The use of cyclodextrin polymers as sorbents in the food sector came first, but smart packaging is now an active challenge. Cyclodextrins have also been recently used to design treatments against the coronavirus disease 2019 (COVID-19).

Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

Molecular imprinting polymers (MIPs), generally considered as artificial mimics that are comparable to natural receptor, are polymers with tailor-made specific recognition sites complementary to the template molecules in shape and size. As a class of supramolecular compounds, cyclodextrins (CDs) are flourishing in the field of molecular imprinting with their unique structural properties. This review presents recent advances in application of MIPs based on CDs during the past five years. The discussion is grouped according to the different role of CDs in MIPs, that is, functional monomer, carrier modifier, etc. Main focus is the application of CD-based MIP on sample preparation, detection, and sensing. Additionally, drug delivery with CD-based MIP is also briefly discussed. Finally, challenges and future prospects of application of CDs in MIP are elaborated.

Pretreatment and determination methods for benzimidazoles: An update since 2005

Benzimidazoles, commonly used as pesticides and veterinary drugs, have posed a threat to human health and the environment due to unreasonable use and lack of valid regulation. Therefore, an up-to-date and comprehensive summary of the pretreatment and analytical approaches in different substrates is urgently needed. The present review consequently updates and covers various newly developed pretreatment methods (e.g., cationic micellar precipitation, magnetic-solid phase extraction, hollow fiber liquid phase microextraction, disperse liquid-liquid microextraction-solidified floating organic drop, stir cake sorptive extraction, solid phase microextraction method, QuEChERS, and molecular imprinted polymer-based methods) since 2005. The review also elaborates and discusses different determination methods (e.g., newly developed HPLC and related methods, improved spectrofluorimetry methods, capillary electrophoresis, and the electrochemical sensor). Furthermore, some critical points and prospects are highlighted, to describe the trends in this area.

Chemical binding of horseradish peroxidase enzyme with poly beta-cyclodextrin and its application as molecularly imprinted polymer for the monitoring of H2 O2 in human plasma samples

In this study, a selective and sensitive molecular imprinting-based electrochemical sensors, for horseradish peroxidase (HRP) entrapment was fabricated using electro polymerization of ß-Cyclodextrin (ß-CD) on the surface of glassy carbon electrode. Poly beta-cyclodextrin P(ß-CD) provide efficient surface area for self-immobilization of HRP as well as improve imprinting efficiency. The proposed imprinted biosensor successfully utilized for detection of HRP with excellent analytical results which linear range is 0.1 mg/mL to 10 ng/mL with LOD of 2.23 ng/mL. Furthermore, electrocatalytical activity of the prepared biosensor toward the reduction of hydrogen peroxide was investigated in the ranges of 1 to 15 μM with a detection limit of 0.4 μM by using chronoamperometry technique. The developed biosensor was used for the detection of hydrogen peroxide in unprocessed human plasma sample.

Simultaneous enrichment and analysis of benzimidazole by in-tube SPME-MS based on poly (3-Acrylamidophenylboronic acid-co-divinylbenzene-co-N,N'-methylenebisacrylamide) monolithic column

In this work, a sensitive, rapid, and matrix effect-free method for online simultaneous detection of benzimidazoles in animal products by in-tube solid-phase microextraction coupled with mass spectrometry (in-tube SPME-MS) was investigated. Herein, according to the chemical structures properites of the analyte benzimidazoles, poly (3-Acrylamidophenylboronic acid-co-divinylbenzene-co-N,N'-Methylenebisacryladmide) [poly (AAPBA-co-DVB-co-MBAA)] microextraction column was prepared, and severs as the extraction and enrichment medium (in-tube SPME) via hydrophobic, B-N coordination, π-π, and hydrogen bonding interactions with the benzimidazoles. The monolithic column was optimized and characterized, showing satisfactory permeability and extraction capacity in range of 514-1000 μg mL^-1 for the benzimidazoles. The important parameters of the in-tube SPME-MS system experimental condition were systematically optimized to achieve the maximal extraction efficiency. Under the optimized condition, the MS intensity of benzimidazoles measured by in-tube SPME-MS is more significant, cleaner, and has a better signal-to-noise ratio than the mass intensity measured by direct MS method. Good linearity was obtained with correlation coefficients between 0.9915 and 0.9990, and the detection limits (S/N = 3) of the benzimidazoles were between 0.55 and 0.91 ng g^-1. Recoveries in the range of 72.5%-92.4% were obtained for the benzimidazoles in pork and chicken in three spiked concentration levels, with satisfactory relative standard deviations (n = 4) that lower than 7.5%. The developed in-tube SPME-MS method based on the poly (AAPBA-co-DVB-co-MBAA) column was successfully used to sensitively determine trace benzimidazoles in animal products without interference peaks, indicating that it is promising for the analysis of benzimidazoles in practical samples that requiring minimal sample pre-treatment and no chromatographic separation.

Functionalization of carbon nanotubes by combination of controlled radical polymerization and "grafting to" method

This paper reviews the recent advances in non-covalent and covalent tethering of small molecules and polymer chains onto carbon nanotube (CNT) and its derivatives. The functionalized CNT has recently attracted great attention because of an increasing number of its potential applications. In non-covalent functionalization of CNT, the sp²-hybridized network plays a crucial role. The non-covalent grafting of small molecules and polymers can mainly be carried out through hydrogen bonding and π-stacking interactions. In covalent functionalization of CNT, condensation, cycloaddition, and addition reactions play a key role. Polymer modification has been reported by using three main methods of "grafting from", "grafting through", and also "grafting to". The "grafting from" and "grafting through" rely on propagation of polymer chains in the presence of CNT modified with initiator and double bond moieties, respectively. In "grafting to" method, which is the main aim of this review, the pre-fabricated polymer chains are mainly grafted onto the surface using coupling reactions. The coupling reactions are used for grafting pre-fabricated polymer chains and also small molecules onto CNT. Recent studies on grafting polymer chains onto CNT via "grafting to" method have focused on the pre-fabricated polymer chains by conventional and controlled radical polymerization (CRP) methods. CRP includes reversible activation, atom transfer, degenerative (exchange) chain transfer, and reversible chain transfer mechanisms, and could result in polymer-grafted CNT with narrow polydispersity index of the grafted polymer chains. Based on the mentioned mechanisms, nitroxide-mediated polymerization, atom transfer radical polymerization, and reversible addition-fragmentation chain transfer are known as the three commonly used CRP methods. Such polymer-modified CNT has lots of applications in batteries, biomedical fields, sensors, filtration, solar cells, etc.