Optimization and modeling of a green dual detected RP-HPLC method by UV and fluorescence detectors using two level full factorial design for simultaneous determination of sofosbuvir and ledipasvir: Application to average content and uniformity of dosage unit testing

Trio-Colored Appraisal of Microwave-Assisted Synthesis of Carbon Quantum Dots as a Fluorescence Turn Off Nanoprobe for Analyzing Ledipasvir in Tablets and Rat Feces: Study of Silymarin Impact on Excretion Recovery

The current work offers a rigorous way for the microwave-assisted synthesis of N and S doped carbon quantum dots (QDs). The latter are deemed highly sensitive and selective fluorescence sensors that were widely investigated in pharmaceutical analysis. Quenching of luminescence of the prepared QDs in lab fabricated sensor at λ emission = 418 nm after excitation at 370 nm was implemented to quantify the anti-HCV drug Ledipasvir (LDP). LDP showed a linear response within the dynamic range of 1-40 μM. The calculated LDP detection and quantification limits were 313.06 and 948.67 nM, respectively. Besides the analysis of LDP in bulk and commercial dosage form, the scope of application extended to evaluate the effect of the nutraceutical silymarin (liver support) on the excretion of LDP in rat feces. The compliance with the green and white analytical chemistry fundamentals is comprehensively investigated and compared with selected versatile reported procedures. Numerous prevalent metrics, namely, analytical eco-scale, AGREE, RGB12, RGB fast, BAGI, and complex GAPI, were employed. Our developed fluorometric procedure demonstrated great sensitivity, selectivity, and functionality that outperformed other sophisticated platforms. Thus, the utility of the depicted procedure in pharmaceutical analysis and studying pharmacokinetics aspects is profoundly proven.

Sofosbuvir: A comprehensive profile

Sofosbuvir, a nucleotide analogue, is an antiviral medication that belongs to the class of direct-acting antivirals (DAAs). It is primarily used in the treatment of chronic hepatitis C virus (HCV) infections. Sofosbuvir works by inhibiting the replication of HCV, disrupting its ability to produce RNA and effectively reducing the viral load in the body. This chapter offers a comprehensive examination of sofosbuvir, including its nomenclature, physiochemical attributes, synthesis, and thermal analysis. Furthermore, it presents various analytical methods employed for both spectrophotometric and chromatographic assessments of sofosbuvir in different matrices.

Current green capillary electrophoresis and liquid chromatography methods for analysis of pharmaceutical and biomedical samples (2019-2023) - A review

Separation analytical methods, including liquid chromatography (LC) and capillary electrophoresis (CE), in combination with an appropriate detection technique, are dominant and powerful approaches preferred in the analysis of pharmaceutical and biomedical samples. Recent trends in analytical methods are focused on activities that push them to the field of greenness and sustainability. New approaches based on the implementation of greener solvents, non-hazardous chemicals, and reagents have grown exponentially. Similarly, recent trends are pushed in to the strategies based on miniaturization, reduction of wastes, avoiding derivatization procedures, or reduction of energy consumption. However, the real greenness of the analytical method can be evaluated only according to an objective and sufficient metric offering complex results taking into account all twelve rules of green analytical chemistry (SIGNIFICANCE mnemonic system). This review provides an extensive overview of papers published in the area of development of green LC and CE methods in the field of pharmaceutical and biomedical analysis over the last 5 years (2019-2023). The main focus is situated on the metrics used for greenness evaluation of the methods applied for the determination of bioactive agents. It critically evaluates and compares the demands of the real applicability of the methods in quality control and clinical environment with the requirements of the green analytical chemistry (GAC). Greenness and practicality of the summarized methods are re-evaluated or newly evaluated with the use of the dominant metrics tools, i.e., Analytical GREEnness (AGREE), Green Analytical Procedure Index (GAPI), Blue Applicability Grade Index (BAGI), and Sample Preparation Metric of Sustainability (SPMS). Moreover, general conclusions and future perspectives of the greening procedures and greenness evaluation metrics systems are presented. This paper should provide comprehensive information to analytical chemists, biochemists, and it can also represent a valuable source of information for clinicians, biomedical or quality control laboratories interested in development of analytical methods based on greenness, practicality, and sustainability.

UPLC-PDA factorial design assisted method for simultaneous determination of oseltamivir, dexamethasone, and remdesivir in human plasma

A green and simple UPLC method was developed and optimized, adopting a factorial design for simultaneous determination of oseltamivir phosphate and remdesivir with dexamethasone as a co-administered drug in human plasma and using daclatasvir dihydrochloride as an internal standard within 5 min. The separation was established on UPLC column BEH C18 1.7 μm (2.1 × 100.0 mm) connected to UPLC pre-column BEH 1.7 μm (2.1 × 5.0 mm) at 50 °C with an injection volume of 10 μL. The photodiode array detector (PDA) was set at three wavelengths of 220, 315, and 245 nm for oseltamivir phosphate, the internal standard, and both dexamethasone and remdesivir, respectively. The mobile phase consisted of methanol and ammonium acetate solution (40 mM) adjusted to pH 4 in a ratio of 61.5:38.5 (v/v) with a flow rate of 0.25 mL min-1. The calibration curves were linear over 500.0-5000.0 ng mL-1 for oseltamivir phosphate, over 10.0-500.0 ng mL-1 and 500.0-5000.0 ng mL-1 for dexamethasone, and over 20.0-500 ng mL-1 and 500.0-5000.0 ng mL-1 for remdesivir. The Gibbs free energy and Van't Hoff plots were used to investigate the effect of column oven temperatures on retention times. Fluoride-EDTA anticoagulant showed inhibition activity on the esterase enzyme in plasma. The proposed method was validated according to the M10 ICH, FDA, and EMA's bioanalytical guidelines. According to Eco-score, GAPI, and AGREE criteria, the proposed method was considered acceptable green.

A Quality by Design (QbD) driven gradient high performance liquid chromatography method development for the simultaneous estimation of dasatinib and nilotinib in lipid nanocarriers

Tyrosine kinase inhibitors (TKIs) are effective as a targeted treatment for chronic myeloid leukemia (CML), which can selectively suppress BCR-ABL1 kinase activity. CML therapy with TKIs combination has been supported by in-vitro, in-vivo, and patient-based data where the nilotinib-dasatinib co-administration has exerted superior anticancer efficacy with greater cellular uptake, less resistance to chemotherapy, and no additive adverse events encountered. Therefore, it is essential to develop a suitable analytical method for the simultaneous estimation of these drugs in the developed novel lipid nanocarriers like liposomes. Design of Experiment (DoE) has been implemented as a tool of QbD to systematically investigate the relation between the HPLC method attributes and analytical responses, i.e., chromatographic detection, quantification, and peak properties for dasatinib and nilotinib. An Ishikawa diagram is constructed to delineate possible influencing variables to the analytical performances. Afterward, 4 factors 2 level full factorial design (FFD) was employed to model and identify the main effects and interaction effects between the factors selected after the initial risk assessment. The suggested design space for optimized chromatographic conditions by QbD analysis is linear within the selected range of drug concentrations, accurate and precise, sensitive, and robust according to the ICH guidelines. The optimal method is comprised of a 1 mL/min flow rate of mobile phase (ACN and 20 mM KH2PO4 of pH 7.00) in gradient mode at 25 °C column temperature for 20 μL sample injection volume and detection wavelength fixed at 297 nm. Most importantly, this novel HPLC method is simple and selective enough to evaluate dasatinib and nilotinib content in the lipid nanocarriers.

Green analytical quality by design RP-HPLC technique with fluorimetric detection for simultaneous assay of cinnarizine and dompridone

A green and sensitive factorial design-assisted reversed-phase high-performance liquid chromatography (RP-HPLC) approach with fluorimetric detection has been developed for simultaneous determination of cinnarizine and domperidone in pure materials, commercial single and combined tablets. Both drugs are co-formulated in one dosage form and are commonly used for the effective treatment of motion sickness in the ratio of 4 : 3 for cinnarizine and domperidone, respectively. To achieve the developed method's best performance and reliability, a 23 full factorial design was applied during the optimization of chromatographic conditions. Subsequently, isocratic elution on a C18 column with a mobile phase mixture of methanol and 0.02 M potassium dihydrogen phosphate buffer (85 : 15 v/v, pH 3.0) was performed to achieve the best separation. Moreover, the flow rate of 0.8 ml min-1 was applied during the analysis with fluorescence detection at λex 283 nm/λem 324 nm. The elution process was time effective; it consumed less than 6 min for a complete run as retention time for cinnarizine and domperidone, was 4.5 and 3.5, respectively. Good linearity of the proposed method was achieved within the concentration ranges of 0.2-4.5 and 0.4-5.0 µg ml-1 for domperidone and cinnarizine, respectively. The suggested approach was carefully validated according to the International Council for Harmonization (ICH) guidelines. Moreover, green analytical procedure index (GAPI), national environmental methods index (NEMI), analytical greenness (AGREE) and analytical eco-scale methods were applied to assess and confirm method greenness.

Host-guest interaction of tryptophane with acid-functionalized calix[4]pyrrole: a fluorescence-based study

Functionalized calix[4]pyrroles are at forefront of host-guest aided molecular sensors. They offer unique platform for flexible functionalization to develop receptors suitable for different applications. In this context, calix[4]pyrrole derivative (TACP) was functionalized with an acidic group to investigate its binding behavior with different amino acids. The acid functionalization facilitated host-guest interactions through hydrogen bonding and increase the solubility of ligand in 90% aqueous media. The results indicated that TACP exhibited significant fluorescence enhancement in the presence of tryptophan while no considerable changes were observed with other amino acids. The other complexation properties such as LOD and LOQ were determined to be 25 µM and 22 µM respectively with 1:1 stoichiometry. In addition, the proposed binding phenomena were further confirmed through computational docking studies and NMR complexation study. Overall, this work highlights the potential of acid functionalization in developing molecular sensors for amino acid detection using calix[4]pyrrole derivatives.Communicated by Ramaswamy H. Sarma.

Development of UPLC method for simultaneous assay of some COVID-19 drugs utilizing novel instrumental standard addition and factorial design

A green, rapid, and simple RP-UPLC method was developed and optimized by full factorial design for the simultaneous separation of oseltamivir phosphate, daclatasivir dihydrochloride, and remdesivir, with dexamethasone as a co-administered drug. The separation was established on a UPLC column BEH C₁₈ 1.7 µm (2.1 × 100.0 mm) connected with a UPLC pre-column BEH 1.7 µm (2.1 × 5.0 mm) at 25 °C with an injection volume of 10 µL. The detector (PDA) was set at 239 nm. The mobile phase consisted of methanol and ammonium acetate (8.1818 mM) in a ratio of 75.7: 24.3 (v/v). The flow rate was set at 0.048 mL min^-1. The overall separation time was 9.5 min. The retention times of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were 6.323 ± 0.145, 7.166 ± 0.036, 8.078 ± 0.124, and 8.572 ± 0.166 min (eight replicates), respectively. The proposed method demonstrated linearity in the ranges of 10.0-500.0 (ng mL^-1) and 0.5-30.0 (µg mL^-1) for oseltamivir phosphate, 50.0-5000.0 (ng mL^-1) for dexamethasone, 25.0-1000.0 (ng mL^-1) and 0.5-25.0 (µg mL^-1) for daclatasvir dihydrochlorde, and 10.0-500.0 (ng mL^-1) and 0.5-30.0 (µg mL^-1) for remdesivir. The coefficients of determination (R²) were greater than 0.9999, with percentage recoveries greater than 99.5% for each drug. The limits of quantitation were 6.4, 1.8, 7.8, and 1.6 ng mL^-1, and the limits of detection were 1.9, 0.5, 2.0, and 0.5 ng mL^-1 for oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir, respectively. The proposed method was highly precise, as indicated by the low percentage of relative standard deviation values of less than 1.2% for each drug. The average content and uniformity of dosage units in the studied drugs' dosage forms were determined. The average contents of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were nearly 93%, 102%, 99%, and 95%, respectively, while the uniformity of dosage unit values were nearly 92%, 102%, 101%, and 97%. Two novel methods were established in this work. The first method was used to assess the stability of standard solutions. This novel method was based on the slope of regression equations. The second was to evaluate the excipient's interference using an innovative instrumental standard addition method. The novel instrumental standard addition method was performed using the UPLC instrument program. It was more accurate, sensitive, time-saving, economical, and eco-friendly than the classic standard addition method. The results showed that the proposed method can estimate the tested drugs' concentrations without interference from their dosage form excipients. According to the Eco-score (more than 75), the Green Analytical Procedure Index (GAPI), and the AGREE criteria (total score of 0.77), the suggested method was considered eco-friendly.

Factorial design-assisted reverse phase HPLC-UV approach for the concurrent estimation of cetirizine and azelastine in aqueous humor

A new analytical quality by design-assisted HPLC-UV approach is presented, for the first time, for the concurrent determination of cetirizine (CTZ) and azelastine (AZE) in raw materials, commercial eye drops and aqueous humor. The two drugs are co-administered as eye drops in severe ocular allergies. A 2³ full factorial design was adopted for the chromatographic optimization to ensure the best analytical performance and reliability, as well as to save time, effort and solvent consumption. The parameters, including pH, acetonitrile ratio, and flow rate, were selected as independent factors. The responses analyzed were resolution and tailing of peaks. The separation was achieved through isocratic elution on C8 column with mobile phase made up of acetonitrile: 0.3% triethylamine of pH 5 (60:40 v/v) at a flow rate of 1.2 mL min^-1 and detection at 216 nm. The elution time was less than 6 min. The approach was fully validated in accordance with International Council for Harmonization (ICH) guidelines. Good linearity was achieved over the concentration ranges of 1.0-30 and 0.5-10 µg mL^-1 with limits of detection of 0.310 and 0.158 µg mL^-1 and limits of quantification of 0.940 and 0.479 µg mL^-1 for CTZ and AZE, respectively, with correlation coefficients of 0.9998. The intra- and inter-day precisions were lower than 2%. The good sensitivity of the approach permits the analysis of CTZ and AZE in spiked aqueous humor with mean percentage recoveries of 100.93 ± 1.42 and 100.11 ± 1.55, respectively. The statistical comparison between results of the developed method and the comparison method revealed no differences, indicating the accuracy of the method.

Multiple spectrophotometric determinations of Chlorthalidone and Cilnidipine using propylene carbonate - As a step towards greenness

Analyzing a drug based on its overlapping spectra requires the use of sophisticated equipment and more hazardous solvents, which is detrimental to ecological sustainability. There is a critical need to create a simple, unique, and cost-effective approach for detecting a mixture of compounds in a safer environment. The aim was to develop an eco-friendly, stability-indicating assay method to determine Chlorthalidone (CLD) and Cilnidipine (CIL) in bulk and tablet dosage form using four different Ultra-Violet (UV) spectrophotometric methods. The ratio difference method showed absorbance peaks at 256.01 nm, 220.87 nm, first ratio difference spectra at 267.21 nm, 288.03 nm, and second ratio difference spectra at 309.2 nm, 280.03 nm. The area under curve techniques showed an absorbance range of around 224-232 nm for CIL and 218-227 nm for CLD. Further, the spectral changes have been assessed at various conditions like acid, base, oxidation, and UV radiation, and it has been found that CLD tends to lose its spectral property by more than 45%. The method developed for two drugs has obeyed Beers law with the selected concentration range of 7-13 μg/mL for CLD and 8.75-16.25 μg/mL for CIL. The developed method was finally evaluated using four tools, and the results showed green pictographically representation in the GAPI and score near to 100 for AES and closer to 1 for AGREE indicated that the method was found to be most eco-friendly. The findings were easy to replicate, adoptive with major regulatory requirements, environmentally friendly, fast, and inexpensive to perform. This approach does not require any specific expensive equipment, and it might be inexpensive to use in the future to assess laboratory and commercial mixtures.

SeDeM tool-driven full factorial design for osmotic drug delivery of tramadol HCl: Formulation development, physicochemical evaluation, and in-silico PBPK modeling for predictive pharmacokinetic evaluation using GastroPlus™

The study is based on using SeDeM expert system in developing controlled-release tramadol HCl osmotic tablets and its in-silico physiologically based pharmacokinetic (PBPK) modeling for in-vivo pharmacokinetic evaluation. A Quality by Design (QbD) based approach in developing SeDEM-driven full factorial osmotic drug delivery was applied. A 2⁴ Full-factorial design was used to make the trial formulations of tramadol HCl osmotic tablets using NaCl as osmogen, Methocel K4M as rate controlling polymer, and avicel pH 101 as diluent. The preformulation characteristics of formulations (F1-F16) were determined by applying SeDeM Expert Tool. The formulation was optimized followed by in-vivo predictive pharmacokinetic assessment using PBPK “ACAT” model of GastroPlus™. The FTIR results showed no interaction among the ingredients. The index of good compressibility (ICG) values of all trial formulation blends were ≥5, suggesting direct compression is the best-suited method. Formulation F3 and F4 were optimized based on drug release at 2, 10, and 16 h with a zero-order kinetic release (r² = 0.992 and 0.994). The SEM images confirmed micropores formation on the surface of the osmotic tablet after complete drug release. F3 and F4 were also stable (shelf life 29.41 and 23.46 months). The in vivo simulation of the pharmacokinetics of the PBPK in-silico model revealed excellent relative bioavailability of F3 and F4 with reference to tramadol HCl 50 mg IR formulations. The SeDeM expert tool was best utilized to evaluate the compression characteristics of selected formulation excipients and their blends for direct compression method in designing once-daily osmotically controlled-release tramadol HCl tablets. The in-silico GastroPlus™ PBPK modeling provided a thorough pharmacokinetic assessment of the optimized formulation as an alternative to tramadol HCl in vivo studies.

Design of experiment techniques for the optimization of chromatographic analysis conditions: A review

Design of experiment (DoE) techniques have been widely used in the field of chromatographic parameters optimization as a valuable tool. A systematic literature review of the available DoE techniques applied to the development of a chromatographic analysis method is presented in this paper. First, the most common available designs and the implementation steps of DoE are comprehensively introduced. Then the studies in recent 10 years for the application of DoE techniques in various chromatographic techniques are discussed, such as capillary electrophoresis, liquid chromatography, gas chromatography, thin-layer chromatography, and high-speed countercurrent chromatography. Current problems and future outlooks are finally given to provide a certain inspiration of research in the application of DoE techniques to the different chromatographic techniques field. This review contributes to a better understanding of the DoE techniques for the efficient optimization of chromatographic analysis conditions, especially for the analysis of complex systems, such as multicomponent drugs and natural products.

Innovative derivative/zero ratio spectrophotometric method for simultaneous determination of sofosbuvir and ledipasvir: Application to average content and uniformity of dosage units

An innovative simple, rapid and sensitive spectrophotometric method was developed for the simultaneous analysis of sofosbuvir (SOF) and ledipasvir (LED) in their combined dosage forms. Sofosbuvir with ledipasvir (SOF/LED) as a combined dosage form was tried at the pandemic COVID 19 crisis. This technique has the advantages of both zero order and first order spectrophotometry. The zero and first derivative amplitudes were measured at 274.2 nm for SOF (zero crossing point of LED in first derivative spectrum) and 314 nm for LED (zero crossing point of SOF in first derivative spectrum) over the concentration range of 2.0-50.0 μg mL^-1 with coefficients of determination (R²) > 0.9999 for both drugs and mean percentage recoveries of 100.25 ± 1.61 and 99.85 ± 0.99 for SOF and LED; respectively. This original method was validated according to ICH requirements and statistically compared to published comparison methods. This method was applied to estimate the average content and the uniformity of dosage units of SOF/LED combined dosage form according to British Pharmacopeia requirements.

An intelligent method based on feed-forward artificial neural network and least square support vector machine for the simultaneous spectrophotometric estimation of anti hepatitis C virus drugs in pharmaceutical formulation and biological fluid

This study proposed simple and reliable spectrophotometry method for simultaneous analysis of hepatitis C antiviral binary mixture containing sofosbuvir (SOF) and daclatasvir (DAC). This technique is based on the use of feed-forward artificial neural network (FF-ANN) and least square support vector machine (LS-SVM). FF-NN with Levenberg-Marquardt (LM) and Cartesian genetic programming (CGP) algorithms was trained to determine the best number of hidden layers and the number of neurons. This comparison demonstrated that the LM algorithm had the minimum mean square error (MSE) for SOF (1.59 × 10^-28) and DAC (4.71 × 10^-28). In LS-SVM model, the optimum regularization parameter (γ) and width of the function (σ) were achieved with root mean square error (RMSE) of 0.9355 and 0.2641 for SOF and DAC, respectively. The coefficient of determination (R²) value of mixtures containing SOF and DAC was 0.996 and 0.997, respectively. The percentage recovery values were in the range of 94.03-104.58 and 94.04-106.41 for SOF and DAC, respectively. Statistical test (ANOVA) was implemented to compare high-performance liquid chromatography (HPLC) and spectrophotometry, which showed no significant difference. These results indicate that the proposed method possesses great potential ability for prediction of concentration of components in pharmaceutical formulations.

Estimation of pitavastatin and ezetimibe using UPLC by a combined approach of analytical quality by design with green analytical technique

The current study explores a design and development of the simple, fast, green and selective novel method of UPLC to quantify pitavastatin and ezetimibe simultaneously. The combined approach of Green Analytical Method with Quality by Design-based risk assessment was done using the Ishikawa fishbone diagram followed by a rotatable central composite design used for the optimization. The optimal chromatographic separation was attained through a mobile phase of 72: 28% v/v ethanol and 0.1% orthophosphoric acid (pH 3.5), with a 0.31 mL min−1 flow rate. The developed UPLC-PDA method was sensitive and specific for pitavastatin and ezetimibe, with linearity ranging from 2 to 30, 10–150 μg mL−1 with an R2 of 0.9999 and 0.9997, respectively. The forced degradation study of stability-indicating assay results shows the degradation in respective stress conditions. The developed UPLC method was validated and found to have sensible results with good linearity, accuracy and precision. Further, the greenness was evaluated using five states of art metrics like NEMI, GAPI, AES, AMGS, and AGREE metrics and found the greenest results. Based on the results we concluded that the developed UPLC method could be efficient for the simultaneous determination of pitavastatin and ezetimibe in bulk and tablet dosage.

Recent advances in the chromatographic determination of the most commonly used anti-hepatitis C drug sofosbuvir and its co-administered drugs in human plasma

Sofosbuvir is a direct-acting antiviral drug that inhibits hepatitis C virus (HCV) NS5B polymerase, which in turn affects the virus replication inside biological systems. The clinical importance of sofosbuvir is based not only on its effect on HCV but also on other lethal viruses such as Zika and severe acute respiratory syndrome coronavirus disease 2019 (SARS-COVID-19). Accordingly, there is a continuous shedding of light on the development and validation of accurate and fast analytical methods for the determination of sofosbuvir in different environments. This work critically reviews the recent advances in chromatographic methods for the analysis of sofosbuvir and/or its metabolites in pure samples, pharmaceutical dosage forms, and in the presence of other co-administered drugs to highlight the current status and future perspectives to enhance its determination in different matrixes.

Innovative Thin-Layer Chromatography/Fluorescence Detection Approach for Sensitive and Specific Determination of Ledipasvir in Rats' Feces and Pharmaceutical Dosage Form

An innovative thin-layer chromatography method coupled with the fluorescence detection was developed for a specific estimation of ledipasvir. The separation was achieved on plates of silica gel 60 F254 using ethylacetate: hexane: acetonitrile: triethylamine; (6: 3.5: 1.5: 0.5, $\mathrm{v}/\mathrm{v}/\mathrm{v}/\mathrm{v}$) as a mobile phase system. The method involved the exposure of the developed thin-layer chromatography plate of ledipasvir to strong ultraviolet irradiation, resulting in a great enhancement in the fluorescence properties of ledipasvir. The irradiated plates were scanned after the excitation at 315 $\mathrm{nm}$. The method provided a sufficient separation of ledipasvir from sofosbuvir with ${R}_F$values of 0.28 and 0.36 for ledipasvir and sofosbuvir, respectively. The developed procedures were validated based on guidelines from the International Conference on Harmonization and Food and Drug Administration guidelines. The calibration curve was linear over the range of 5-50 $\mathrm{ng}/\mathrm{band}$. The excellent analytical features of the proposed method allow to the specific determination of ledipasvir in pharmaceutical tablets without interference from sofosbuvir or excipients. As the main elimination route for ledipasvir is via the fecal excretion (86%), the method was applied for the estimation of ledipasvir in fecal specimens with adequate recovery. In addition, the proposed method was applied for testing the content uniformity of ledipasvir in the pharmaceutical tablets.

A Review on Analytical Strategies for the Assessment of Recently Approved Direct Acting Antiviral Drugs

Human beings are in dire need of developing an efficient treatment against fierce viruses like hepatitis C virus (HCV) and Coronavirus (COVID-19). These viruses have already caused the death of over two million people all over the world. Therefore, over the last years, many direct-acting antiviral drugs (DAADs) were developed targeting nonstructural proteins of these two viruses. Among these DAADs, several drugs were found more effective and safer than the others as sofosbuvir, ledipasvir, grazoprevir, glecaprevir, voxilaprevir, velpatasvir, elbasvir, pibrentasvir and remdesivir. The last one is indicated for COVID-19, while the rest are indicated for HCV treatment. Due to the valuable impact of these DAADs, larger number of analytical methods were required to meet the needs of the clinical studies. Therefore, this review will highlight the current approaches, published in the period between 2017 to present, dealing with the determination of these drugs in two different matrices: pharmaceuticals and biological fluids with the challenges of analyzing these drugs either alone, with other drugs, in presence of interferences (pharmaceutical excipients or endogenous plasma components) or in presence of matrix impurities, degradation products and metabolites. These approaches include spectroscopic, chromatographic, capillary electrophoretic, voltametric and nuclear magnetic resonance methods that have been reported during this period. Moreover, the analytical instrumentation and methods used in determination of these DAADs will be illustrated in tabulated forms.

Analytical Methods for Determination of Antiviral Drugs in Different Matrices: Recent Advances and Trends

Viruses are the main pathogenic substances that cause severe diseases in humans and other living things. They are among the most common microorganisms, and consequently, antiviral drugs have emerged to prevent and treat viral infections. Antiviral drugs are an essential drug group considering their prescription and consumption rates for different diseases and indications. Therefore, it is crucial to develop accurate and precise analytical methods to detect antiviral drugs in various matrices. Chromatographic techniques are used frequently for the quantification purpose since they allow simultaneous determination of antivirals. Electrochemical methods have also gained importance since the analysis can be performed quickly without the need for pretreatment. Spectrophotometric and spectrofluorimetric methods are used because they are simple, inexpensive, and less time-consuming methods. The purpose of this review is to present an overview of the analysis of currently used antiviral drugs from 2010 to 2021. Since studies on antiviral drugs are numerous, selected publications were reviewed in this article. The analysis of antiviral drugs was divided into three main groups: chromatographic, spectrometric, and electrochemical methods which were applied to different matrices, including pharmaceutical, biological, and environmental samples.

Novel spectrofluorimetric approach for determination of ledipasvir through UV-irradiation: application to biological fluids, pharmacokinetic study and content uniformity test

A highly sensitive and specific fluorescence dependent approach was created for quantitation of a recently approved anti-HCV drug (ledipasvir). This approach relies on the innovative enhancement in fluorescence intensity of ledipasvir upon exposing the cited drug to direct UV irradiation as a photo-physical fluorescence enhancer. The fluorescence of the resultant solution was measured at an emission peak of 375 nm (321 nm excitation). The photoluminescence properties of the resultant product were carefully examined and the quantitative rectilinear concentration plot for the method was 5.0–150.0 ng mL⁻¹ with a detection limit of 0.9 ng mL⁻¹ and a quantitation limit of 2.7 ng mL⁻¹. The excellent analytical features of the proposed method allow to the specific and sensitive estimation of ledipasvir either in plasma samples or in tablet dosage form without any interference from pharmaceutical excipients or other co-formulated anti-HCV drugs (sofosbuvir). The developed analytical and bio-analytical procedures were created and validated according to ICH guidelines and FDA guidelines, respectively. Since the main elimination route for ledipasvir is via faecal excretion, the studied drug was determined for the first time in faecal samples by the method with adequate recovery. Moreover, the pharmacokinetic parameters (C_max, t_max, t_1/2, AUC_0–t, and AUC_0–∞) for ledipasvir were determined by the proposed method. Additionally, the proposed method was successfully applied for supervising the content uniformity for ledipasvir in its pharmaceutical tablets.

Enhancement in the fluorescence spectra of ledipasvir after exposing to strong UV irradiation.