NiCl(OH) nanosheet array as a high sensitivity electrochemical sensor for detecting glucose in human serum and saliva

Remarkable purification of organic dyes by NiOOH-modified industrial waste residues

Extracting functional materials from industrial waste residues to absorb organic dyes can maximize waste reuse and minimize water pollution. However, the extraordinarily low purification efficiency still limits the practical application of this strategy. Herein, the lamellar NiOOH is in-situ anchored on the industrial waste red mud surface (ARM/NiOOH) as an adsorbent to purify organic dyes in wastewater. ARM/NiOOH adsorbent with high specific surface area and porosity provides considerable active sites for the congo red (CR), thereby significantly enhancing the removal efficiency of CR. Besides, we fit a reasonable adsorption model for ARM/NiOOH adsorbent and investigate its adsorption kinetics. Resultantly, ARM/NiOOH adsorbent can remarkably adsorb 348.0 mg g-1 CR within 5 min, which is 7.91 times that of raw RM. Our work provides a strategy for reusing industrial waste and purifying sewage pollution, which advances wastewater treatment engineering.

Enhanced peroxidase-like activity of Cu-Cu2O composite film through PtPd immobilization for colorimetric glucose detection

In this study, Cu-Cu2O/PtPd nanocomposites were synthesized and characterized for their peroxidase-like enzyme activity. X-ray diffraction and energy dispersive X-ray spectroscopy analyses confirmed the successful synthesis of the nanocomposites, which exhibited a flower-like morphology and a more uniform dispersion than Cu-Cu2O. The catalytic activity of Cu-Cu2O/PtPd was evaluated using the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB), finding that Cu-Cu2O/PtPd outperformed Cu-Cu2O. The optimal temperature and pH for the catalytic activity of Cu-Cu2O/PtPd were determined to be 40 °C and pH 4.0, respectively. A kinetic analysis revealed that Cu-Cu2O/PtPd followed Michaelis-Menten kinetics and exhibited a higher affinity toward TMB than the horseradish peroxidase enzyme. The catalytic mechanism of Cu-Cu2O/PtPd involved the generation of hydroxyl radicals, which facilitated the oxidation of TMB. Furthermore, the Cu-Cu2O/PtPd nanocomposite was successfully applied for the colorimetric detection of glucose, demonstrating a linear range of 8-90 μM, a detection limit of 2.389 μM, and high selectivity for glucose over other sugars.

MOF-derived NiCo hydroxide for highly efficient non-enzymatic glucose biosensing

An efficient and robust electrocatalyst is significant for glucose biosensing. The emergence of metal-organic framework (MOF) derived materials opens up new avenues for the development of high-performance glucose sensing catalysts. Herein, MOF derived nickel-cobalt hydroxide supported on conductive copper sheet (NiCo-OH/Cu sheet) is prepared at room temperature. The as-obtained NiCo-OH is endowed with three-dimensional network structure which enables the effective exposure of active materials, sufficient contact between glucose molecule and catalyst. The NiCo-OH/Cu sheet is revealed as good glucose electrochemical sensing material with a wide linear range of 0.05∼6.0 mM and a high sensitivity of 1340μA mM-1cm-2. Additionally, the as-fabricated NiCo-OH/Cu sheet displays good anti-interference ability and long-term stability.

Monitoring saliva compositions for non-invasive detection of diabetes using a colorimetric-based multiple sensor

The increasing population of diabetic patients, especially in developing countries, has posed a serious risk to the health sector, so that the lack of timely diagnosis and treatment process of diabetes can lead to threatening complications for the human lifestyle. Here, a multiple sensor was fabricated on a paper substrate for rapid detection and controlling the progress of the diabetes disease. The proposed sensor utilized the sensing ability of porphyrazines, pH-sensitive dyes and silver nanoparticles in order to detect the differences in saliva composition of diabetic and non-diabetic patients. A unique color map (sensor response) was obtained for each studied group, which can be monitored by a scanner. Moreover, a good correlation was observed between the colorimetric response resulting from the analysis of salivary composition and the fasting blood glucose (FBG) value measured by standard laboratory instruments. It was also possible to classify participants into two groups, including patients caused by diabetes and those were non-diabetic persons with a total accuracy of 88.9%. Statistical evaluations show that the multiple sensor can be employed as an effective and non-invasive device for continuous monitoring of diabetes, substantially in the elderly.

Pt/MXene-Based Flexible Wearable Non-Enzymatic Electrochemical Sensor for Continuous Glucose Detection in Sweat

Wearable non-invasive sensors facilitate the continuous measurement of glucose in sweat for the treatment and management of diabetes. However, the catalysis of glucose and sweat sampling are challenges in the development of efficient wearable glucose sensors. Herein, we report a flexible wearable non-enzymatic electrochemical sensor for continuous glucose detection in sweat. We synthesized a catalyst (Pt/MXene) by the hybridization of Pt nanoparticles onto MXene (Ti₃C₂T_x) nanosheets with a broad linear range of glucose detection (0-8 mmol/L) under neutral conditions. Furthermore, we optimized the structure of the sensor by immobilizing Pt/MXene with a conductive hydrogel to enhance the stability of the sensor. Based on Pt/MXene and the optimized structure, we fabricated a flexible wearable glucose sensor by integrating a microfluidic patch for sweat collection onto a flexible sensor. We evaluated the utility of the sensor for the detection of glucose in sweat, and the sensor could detect the glucose change with the replenishment and consumption of energy by the body, and a similar trend was observed in the blood. An in vivo glucose test in sweat indicated that the fabricated sensor is promising for the continuous measurement of glucose, which is essential for the treatment and management of diabetes.

A facile method for the fabrication of hierarchically structured Ni2CoS4 nanopetals on carbon nanofibers to enhance non-enzymatic glucose oxidation

Unique Ni₂CoS₄-carbon nanofiber (CNF) composite nanostructures were fabricated using a simple electrospinning-assisted hydrothermal route and used for the rapid and accurate electrochemical oxidation of glucose in real samples at the trace level. Electrochemical impedance spectroscopy and cyclic voltammetry of unmodified and modified electrodes revealed low charge-transfer resistance and the excellent electrocatalytic sensing of glucose when using the Ni₂CoS₄-CNF at a low potential due to the combined benefits of the highly conductive Ni₂Co₂S₄ anchored to the large surface area of the CNFs. Amperometric analysis of the fabricated sensor has shown an extremely low limit of detection (0.25 nM) and a large linear range (5-70 nM) for glucose at a working potential of 0.54 V (vs. Hg/HgO). The practicability of the Ni₂CoS₄-CNF for use in glucose determination was tested withl human saliva, blood plasma, and fruit juice samples. The Ni₂CoS₄-CNF/GCE showed acceptable recovery values for human saliva (99.1-100.8%), blood plasma (98.6-101.5%), and fruit juice (95.1-105.7%) samples. The proposed sensor also exhibited outstanding electroanalytical characteristics for glucose oxidation in these samples, including reusability, repeatability, and interference resistance, even in the presence of other biological substances and organic and inorganic metal ions.