Electrochemical sensing of methylmalonic acid based on molecularly imprinted polymer modified with graphene oxide and gold nanoparticles

Ultrasensitive detection of holoTC for analysis of Vitamin B12 levels using Ag2MoO4 deposited PEDOT sensing platform

Vitamin B12 is an essential micronutrient required for the proper functioning of the human body. Vitamin B12 deficiency is primarily causative of various neurolological disorders alongwith recurrence of oral ulcers and burning sensations which are early signs of condition such as pernicious anemia. Other complications associated with Vitamin B12 deficiency include risk of heart failure due to anemia, risk of developing autoimmune disorders and gastric cancer. Therefore, to obstruct these communal health issues, early detection of Vit B12 is highly needed. However, screening of vitamin B12 insufficiency is hindered by the low sensitivity of the conventional vitamin B12 test. Holotranscobalamin (holoTC) is an early indicator of the negative vitamin B12 balance as it is the first protein to decline in the serum. We report a novel impedimetric immunosensor based on flower-like poly (3,4-ethylenedioxythiophene) (PEDOT) nanostructural film impregnated with silver molybdate nanoparticles (Ag2MoO₄ NPs) deposited on fluorine-doped tin oxide electrode. The prepared electrodes were characterized by Field emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and electrochemical studies. The activated anti-holoTC antibody was immobilized and optimized to capture the target in a response time of 15 min. The electrochemical performance of the sensor was carried out by using the electrochemical impedance spectroscopy technique (EIS) and a good linear relationship between ΔRct and holoTC was obtained in the range from 0.1 pg mL-1 to 100 ng mL-1 with a detection limit of 0.093 pg mL-1. The proposed sensor was successfully applied in human serum samples for holoTC detection. The experimental results showed that the immunosensor is highly selective towards holoTC and presented an acceptable stability of 20 days with reproducibility RSD ≤4%. To the best of our knowledge, this is the first developed electrochemical immunosensor for holoTC detection.

Stable Co(II)-based coordination polymer as fluorescence sensor for the discriminative sensing of biomarker methylmalonic acid

Three novel Co-based coordination polymers including {[Co(L)(μ3-O)1/3]2}n (1), {[Co(L)(bimb)]}n (2) and {[Co(L)(bimmb)1/2]}n (3) (H2L = 2,6-di(4-carboxylphenyl)-4-(4-(triazol-1-ylphenyl))pyridine), bimb = 1,4-bis(lmidazol) butane, bimmb = 1,4-bis(imidazole-1-ylmethyl)benzene) were successfully prepared under solvothermal conditions and characterized. Single-crystal X-ray diffraction analyses revealed that 1 possesses a 3D architecture composed of a trinuclear cluster [Co3N3(CO2)6(μ3-O)], 2 exhibits a 2D new topological framework with the point symbol (84·122)(8)2, whereas 3 shows a unique six-fold interpenetrated 3D framework with a (63·82·10)2(63)2(8) topology. Impressively, all of them can function as a highly selective and sensitive fluorescent sensor for the biomarker methylmalonic acid (MMA) via fluorescence quenching. The low detection limit, reusability and high anti-interference performance together make 1-3 become promising sensors for the practical detection of MMA. Furthermore, the successful application of MMA detection in urine sample was demonstrated, which may be a potential candidate for the further development of clinical diagnostic tools.

Exploring the potential of molecularly imprinted polymers and metal/metal oxide nanoparticles in sensors: recent advancements and prospects

Metal/metal oxide nanoparticles have gained increasing attention in recent years due to their outstanding features, including optical and catalytic properties, as well as their excellent conductivity. The implementation of metal/metal oxide nanoparticles, combined with molecularly imprinted polymers (MIPs) has paved the way for a new generation of building blocks to engineer and enhance the fascinating features of advanced sensors. This review critically evaluates the impact of combining metal/metal oxide nanoparticles with MIPs in sensors. It covers synthesis strategies, advantages of coupling these materials with MIPs, and addresses questions about the selectivity of these hybrid materials. In the end, the current challenges and future perspectives of this field are discussed, with a particular focus on the potential applications of these hybrid composites in the sensor field. This review highlights the exciting opportunities of using metal/metal oxide nanoparticles along with MIPs for the development of next-generation sensors.

Magnetic MXene-based molecularly imprinted electrochemical sensor for methylmalonic acid

A novel magnetic Ti₃C₂T_x-MXene/Fe₃O₄ composite was prepared from Ti₃C₂T_x and magnetic Fe₃O₄. The characterizations by electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) exhibited that the Ti₃C₂T_x/Fe₃O₄ nanomaterial presented an outstanding conductivity and a large specific area, which could improve the electron transfer rate, leading to the amplification of the sensor's signal. Furthermore, an ultrasensitive molecularly imprinted electrochemical sensor based on MXene/Fe₃O₄ composites was fabricated for detecting methylmalonic acid (MMA) with high selectivity. The current intensity of differential pulse voltammetry of the sensor presented a good linear relationship with the logarithm of MMA concentration ranging from 9 × 10^-15 mol L^-1 to 9 × 10^-13 mol L^-1. The detection limit of the sensor was 2.33 × 10^-16 mol L^-1. The fabricated sensor was utilized for detecting MMA in human serum samples with excellent recoveries. Therefore, this method significantly improved the sensitivity of detection, and constitutes an  affordable sensing platform for trace detection of organic carboxylic acid.

Two Co-Based Metal-Organic Framework Isomers with Similar Metal-Carboxylate Sheets: Turn-On Ratiometric Luminescence Sensing Activities toward Biomarker N-Acetylneuraminic Acid and Discrimination of Ga3+ and In3

Two supramolecular Co-MOF isomers, namely, {[Co(L)_0.5(m-bimb)]·3H₂O}_n (LCU-115) and {[Co(L)_0.5(p-bimb)]·3H₂O}_n (LCU-116), were synthesized from an amide-containing carboxylic acid N,N″-(3,5-dicarboxylphenyl)benzene-1,4-dicarboxamide (H₄L) and two flexible positional isostructural N-containing ligands m-bimb and p-bimb (m-bimb = 1,3-bis((1H-imidazol-1-yl)methyl)benzene; p-bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene). The carboxylate ligands connect Co(II) centers to form 2D metal-carboxylate sheets, which are extended further by m-bimb and p-bimb to form a 2D bilayer with parallel stacking (LCU-115) and a 3D framework (LCU-116), respectively. Luminescence measurements indicated that these two complexes exhibited interesting multiresponsive sensing activities toward pH, biomarker N-acetylneuraminic acid, and trivalent cations Ga³⁺/In³⁺. They show highly sensitive turn-on fluorescence responses in the acidic range and can also be regarded as on-off-on vapoluminescent sensors to typical acidic and basic gases HCl and Et₃N. It is worth noting that these complexes have excellent turn-on ratiometric fluorescence sensing ability for N-acetylneuraminic acid (NANA) with detection limits as low as 7.39 and 8.06 μM, respectively. Furthermore, they were successfully applied for the detection of NANA in simulated urine and serum samples with satisfactory results. For ion detection, LCU-116 could detect both Ga³⁺ and In³⁺, while LCU-115 could distinguish Ga³⁺ from In³⁺ with the latter showing luminescence quenching. The sensing mechanism was investigated in detail by XRD, UV-vis, EDS, XPS, SEM, and TEM. The results of interday and intraday precision studies gave low RSD values in the range of 1.19-3.53%, ascertaining the reproducibility of these sensors. The recoveries for the sensing analytes in simulated urine/serum or real water are satisfactory from 96.7 to 103.3% (toward NANA) and 96.6 to 115.0% (toward Ga³⁺ and In³⁺), indicating that these two complexes also possess acceptable reliability for monitoring in real samples. The results indicated that the supramolecular isomers LCU-115 and LCU-116 are promising material candidates for application in biological and environmental monitoring.

Ni Nanoparticles Embedded Ti3C2Tx-MXene Nanoarchitectures for Electrochemical Sensing of Methylmalonic Acid

MXenes-Ti3C2Tx, based on their versatile surface characteristics, has rapidly advanced as an interactive substrate to develop electrochemical sensors for clinical applications. Herein, Ni embedded Ti3C2Tx (MX-Ni) composites were prepared using a self-assembly approach where Ti3C2Tx sheets served as an interactive conductive substrate as well as a protective layer to nickel nanoparticles (Ni NPs), preventing their surface oxidation and aggregation. The composite displayed a cluster-like morphology with an intimate interfacial arrangement between Ni, Ti3C2Tx and Ti3C2Tx-derived TiO2. The configuration of MX-Ni into an electrochemical sensor realized a robust cathodic reduction current against methylmalonic acid (MMA), a biomarker to vitamin B12 deficiency. The synergism of Ni NPs strong redox characteristics with conductive Ti3C2Tx enabled sensitive signal output in wide detection ranges of 0.001 to 0.003 µM and 0.0035 to 0.017 µM and a detection sensitivity down to 0.12 pM of MMA. Importantly, the sensor demonstrated high signal reproducibility and excellent operational capabilities for MMA in a complex biological matrix such as human urine samples.

An electrochemical sensor modified with a molecularly imprinted polymer and carbon black for 17-β-estradiol detection

The purpose of this work was to apply an electrochemical sensor modified with a molecularly imprinted polymer (MIP) and carbon black (CB) for 17β-estradiol (E2) detection in river water samples. The synthesized MIP was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM).The modification of the electrode with the MIP and CB contributed to increased sensitivity, an increase of over 173% in relation to that of the bare electrode. The experimental parameters, amount of modifiers, pH and possible interfering species were evaluated. The method showed linearity from 0.10 to 23.0 μmol L^-1 and detection and quantification limits of 0.03 and 0.10 μmol L^-1, respectively. The application of the developed sensor was considered simple, resulting in a fast, low operating cost method, with recovery values between 103 and 105%.

A facile and economic electrochemical sensor for methylmalonic acid: a potential biomarker for vitamin B12 deficiency

A facile and cost-effective method based on a modified pencil graphite electrode (PGE) has been developed for sensing of methylmalonic acid (MMA). The fabricated sensor showed a linear dynamic range (0.50 pM–55 nM) and a LOD of (0.16 pM).

Recent Advances in Nanomaterials Based Molecularly Imprinted Electrochemical Sensors

Nanotechnology and molecular imprinting both are omnipresent in the modern scientific world. Molecular recognition in the biological systems was mimicked to an extreme extent with its difficulties through molecular imprinting. Solving the problems related to this mimicking was the goal of science and technology. Some challenges like difficulties with the imprinting of protein, poor compatibility with aqueous environments, template leakage, and heterogeneous populations of binding sites in the polymers that contribute to a high level of nonspecific binding sites were addressed with recent advancement in the modern era. These issues were solved later with nano level instrumentations and inventions. Different types of nanomaterials were employed for this research on molecular recognition through MIPs to enhance selectivity, sensitivity and stability to specific systems such as sensors. This review paper attempts to give all the recent advances in molecular imprinting and the potential of nanomaterials in electrochemical sensors.