Reagent-free hemoglobin estimation on a spinning disc

Nanoparticles-based electrochemical sensing platform for high-through immunoassay with redox-activity CaCO3 nanotags on a magnetic microfluidic device

A new nanoparticles-based sensing platform was designed for high-through electrochemical immunoassay of ferritin (FET) biomarker on a magneto-controlled microfluidic device by using anti-FET capture antibody-conjugated magnetic sensing probes. Thionine-doped calcium carbonate (CaCO3) nanoparticles labeled with anti-FET detection antibodies were utilized as the recognition elements. Introduction of target FET caused the sandwich-type immunoreaction between two antibodies. The formed immunocomplexes were attached onto magnetic microfluidic sensing interface through an external magnet. Subsequently, the carried CaCO3 nanoparticles were dissolved under acidic conditions to release the doped thionine molecules with redox activity. The thionine-based voltammetric signals increased with the increment of target FET levels within the linear range 0.01-100 ng mL-1. The limit of detection was 7.9 pg mL-1 FET. Good analytical properties such as selectivity, reproducibility, and accuracy were achieved with the nanoparticles-based magnetic electrochemical immunoassay. More significantly, the magnetic microfluidic electrochemical immunoassay provides new opportunities for rapid, simple, and cost-effective serum sample analysis.

Last Trends in Point-of-Care (POC) Diagnostics for the Management of Hematological Indices in Home Care Patients

Today, complete blood count (CBC) analyses are highly automated and allow for high throughput and accurate and reliable results. However, new analytical tools are in great demand to provide simple, rapid and cost-effective management of hematological indices in home care patients. Chronic disease monitoring at home has become a benefit for patients who are finding cost savings in programs designed to monitor/treat patients in offsite locations. This review reports the latest trends in point-of-care (POC) diagnostics useful for home testing of key hematological counts that may be affected during home therapy treatment.

A smartphone-integrated portable rotating platform for estimation of concentration level of plasma-creatinine using whole human blood

The measurement of creatinine concentration is performed to monitor the renal health. The devices available in modern clinical laboratories for measuring creatinine concentration are accurate and provide results rapidly but may be prohibitively expensive for resource-poor settings. Therefore, developing an inexpensive yet accurate device for measuring creatinine concentration is needed. Consequently, we developed a simple, affordable, and portable spinning disc for measuring plasma-creatinine concentration with 10 μL of whole human blood. 5 μL of the alkaline picrate solution is loaded into the device and rotated at 1000 rpm to transport this solution to the periphery of the microchannel. Further, 10 μL whole blood is loaded in the same channel and spun at 1300 rpm for 10 min. The creatinine in plasma reacts with alkaline picrate (Jaffe reaction), and the color of the mixture changes to yellow-orange color. The resulting color is captured with a smartphone, and creatinine concentration is estimated using an in-house developed app (CREA-SESE). The value of creatinine measured with the present device and the gold standard device are highly correlated (R² = 0.998). The bias and standard deviation of the difference between the two measurements are 0.134 mg/dL and 0.143 mg/dL. This study demonstrates the feasibility of a simple, inexpensive, and portable rotating device for measuring creatinine concentration using 10 μL of whole human blood, which can easily be deployed to the underserved population in resource-constrained settings to monitor renal diseases.

Simultaneous quantitative detection of hematocrit and hemoglobin from whole blood using a multiplexed paper sensor with a smartphone interface

We report a highly accurate single-step label-free testing technology for simultaneous and independent hematocrit (Hct) and hemoglobin (Hb) level detection from a drop of whole blood by employing a disposable paper strip sensor interfaced with a portable impedimetric device. The paper strip is fabricated by in situ automated printing of a customized electrode template on the non-glossy side of a commercially available photo paper substrate followed by graphite deposition. The integrated platform device technology additionally includes a compact detection cum readout unit comprising a high precision impedance converter system that combines an on-board frequency generator with an analog-to-digital converter evaluation board, collectively interfaced with a central processor, calibration circuit, and smartphone. Employing a dispensed blood sample volume of 25 μL, the device is shown to have a sensitivity of 92 Ω/Hct and 287 Ω/Hb at an optimal frequency of 57 kHz. The respective linear response regimes appear to be wide enough to cover physiologically relevant limits, with excellent stability and reproducibility. Validation with clinical samples reveals limits of detection of Hct and Hb levels as low as 4.66% and 1.89 g dL^-1, respectively, which are beyond the quantitative capability of commonly used affordable point of care test kits. The envisaged paradigm of rapid, robust, highly accurate, energy-efficient, simple, user-friendly, multiplex portable detection, obviating any possible ambiguities in interpretation due to common artefacts of colorimetric detection technologies such as optical interference with the image analytical procedure due to the inherent redness of blood samples and background illumination, renders this ideal for deployment in resource-limited settings.