A photo-sensitive BiVO4@Bi2O3@g-C3N4 sensor for the detection of dopamine

BiVO4/C3N4 heterojunction-gated organic photoelectrochemical transistor for sensitive detection of neurotransmitter

Developing advanced signal amplification strategies is essential for improving performance of state-of-the-art photoelectrochemical (PEC) analysis and integrated organic electrochemical transistor (OECT) devices. This study introduces a novel approach by integrating a BiVO4/C3N4 heterojunction photoanode with organic photoelectrochemical transistor (OPECT) devices to achieve efficient signal modulation. The BiVO4/C3N4 heterojunction is designed to promote effective charge separation and enhance the photoelectrochemical effect, introducing an efficient dual electrochemical signal amplification strategy. Dopamine (DA), a key neurotransmitter, is used as the target analyte as a proof-of-concept study. It acts as an effective electron donor, directly participating in redox reactions to amplify the channel signal and indirectly modulating the channel response through the BiVO4/C3N4 electrode. The signal amplification results in the signal enhancement of three orders of magnitude. The developed bioanalytical method enables sensitive detection of DA with a good linear range from 10-7 to 10-4 M. Importantly, this dual amplification mechanism is independent of interactions between biological recognition molecules and analytes, providing a universal dual electrochemical signal amplification OPECT sensing platform. These findings indicate the potential this device has for the real-time monitoring of neurotransmitter levels, important for neurological disease monitoring.

Advances of immunosensors based on noble metal composite materials for detecting procalcitonin

Procalcitonin (PCT) is a reliable biomarker for diagnosing and monitoring bacterial infections and sepsis. PCT exhibits good stability both in vivo and in vitro, and its levels drastically increase in response to bacterial infection or inflammatory reactions in the human body, making it a dependable indicator for sepsis diagnosis and monitoring with significant implications for clinical diagnosis and treatment guidance. Currently, immunosensors are widely utilized in PCT detection due to their high sensitivity and low detection limits. Noble metals, because of their excellent electronic conductivity, biocompatibility, and superior physicochemical properties, are extensively combined with other materials to play a pivotal role in the construction of PCT immunosensors. This review summarizes the research progress on PCT antigen immunosensors based on noble metal composite materials, encompassing the classification and principles of immunosensors. Starting from noble metals, which are widely used as electrode materials in sensors, the review categorizes and discusses the carbon materials, metal oxides, metal sulfides, and other composites with noble metals. The review also elaborates on the influence of sensitive materials on the performance of immunosensors. Finally, the review discusses and anticipates the challenges and future opportunities for the research on PCT antigen immunosensors using noble metal-composite nanomaterials, providing new insights and directions for their application in the treatment and clinical management of sepsis and other diseases.

A novel Cu-MOFs nanosheet/BiVO4 nanorod-based ECL sensor for colorectal cancer diagnosis

Although luminescence metal organic framework (MOFs) has displayed the significant advantages, the limitations in the electrochemical performance (e.g. rapid charge recombination rates and inadequate charge transport) limited the sensing application of MOFs. Herein, a novel Cu-MOFs/BiVO4 nanorod-based electrogenerated chemiluminescence (ECL) sensor has been developed. Firstly, Cu-MOFs with strong luminescence were synthesized via the three-layer approach as ECL emitter. Furthermore, BiVO4 nanorods was modified on the electrode as the actuator to improve the electrochemical activity of Cu-MOFs in the ECL process. As an n-type semiconductor, BiVO4 formed a complementary structure with p-type semiconductor Cu-MOF. Therefore, electrons in the conduction band of BiVO4 transferred to that of Cu-MOF. As a result, more electrons reacted with coreactant on the surface of Cu-MOF, which effectively enhanced the ECL performance of 2D Cu-MOFs nanosheets. As a result, the quantitation of KRAS gene was realized in the linear range of 0.1 pM-1 nM with a detection limit of 0.02 fM. Moreover, the detection of KRAS gene in actual colorectal cancer samples was also carried out with good recovery, which offered a broad application possibility for ECL research and clinical analysis.

Development of novel nanocomposite-modified photoelectrochemical sensor based on the association of bismuth vanadate and MWCNT-grafted-molecularly imprinted poly(acrylic acid) for dopamine determination at nanomolar level

This study proposes the development of a new photoelectrochemical (PEC) sensor for the determination of dopamine (DA) at nanomolar levels. The PEC sensor was based on a physical mixture of bismuth vanadate (BiVO4) with nanocomposite molecularly imprinted poly(acrylic acid) (MIP-AA) grafted onto MWCNTox by using the surface-controlled radical polymerization strategy with an INIFERTER reagent. XRD, diffuse reflectance spectroscopy (DRE), SEM, TEM, and TGA were employed to characterize the materials. Photoelectrochemical analyses were carried out with GCE/BiVO4/MIP-AA sensor under visible light using a potential of 0.6 V, phosphate buffer (0.1 mol L-1) at pH 7.0, and modifying the GCE with a film composed of monoclinic BiVO4 at 3.5 mg mL-1 and nanocomposite MIP prepared with acrylic acid (MIP-AA) at 0.1 mg mL-1. The proposed method using the GCE/BiVO4/MIP-AA sensor presented a limit of detection (LOD) of 2.9 nmol L-1, a linear range from 9.7 to 150 nmol L-1 and it was successfully applied for analysis of DA in urine samples using external calibration curve yielding recovery values of 90-105%. Additionally, the proposed PEC sensor allowed DA determination without interference from uric acid, ascorbic acid, epinephrine, norepinephrine, and other unwanted interferences.

An Enhanced Photosensitive Sensor Based on ITO/MWCNTs@Polymer Composite@BiVO4 for Quercetin Detection

The fact that antioxidants scavenge free radicals in the human body and naturally treat many health problems that will occur in this way has increased the consumption of antioxidant-containing foods. However, consumption of artificially prepared antioxidants could cause cancer. Therefore, antioxidants from natural sources are preferred. Quercetin is an antioxidant present in natural samples. In this article, multi-walled carbon nanotubes (MWCNTs), a polymer composite (PC) consisting of a mixture of 15% (by mass) polystyrene (PST), 15% (by mass) polyacrylonitrile (PAN) and 70% (by mass) polyindole (PIN), and semiconducting BiVO₄ were used to prepare electrodes, and then a photosensitive ITO/MWCNTs@PC@BiVO₄-based sensor was fabricated for quercetin detection. Quercetin was analyzed via the photosensitive ITO/MWCNTs@PC@BiVO₄ sensor in 0.1 M phosphate buffered saline (pH 7.4) solutions including various quercetin concentrations. The constructed quercetin sensor displayed a wide linear response between 10 and 200 μM and a limit of detection of 0.133 μM. The developed photosensitive ITO/MWCNTs@PC@BiVO4 demonstrated a high sensitivity (442 µA mM^-1 cm^-2), good reproducibility (relative standard deviation 3.6%), high selectivity and long-term stability (>49 days) towards quercetin sensing. The photoelectrochemical sensor was then applied to detection of quercetin in black tea as a real-life sample. Our study could lead to the development of novel photosensitive PC polyphenol sensors.

Photoelectrochemical sensing of glutathione using bismuth vanadate (BiVO4) decorated with polyaniline (PANI) and cadmium sulfide (CdS)

A ternary nanocomposite photoelectrode composed of cadmium sulfide (CdS), polyaniline (PANI), and bismuth vanadate (BiVO₄) was successfully designed by combining cyclic voltammetry (CV) with electrochemical deposition and high-temperature calcination. The first synthesized CdS/PANI/BiVO₄ composite was used as a photoelectrochemical (PEC) monitoring platform for glutathione (GSH). The ternary CdS/PANI/BiVO₄ nanocomposites exhibited higher PEC activity, which was attributed to the accelerated electron transfer by the loading of CdS and PANI, which enables the material surface to better adsorb the electrons separated by GSH, thereby oxidizing it into GSSH. The photoanodes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectroscopy, and photoelectrochemical experiments. Under the optimal experimental conditions, the BiVO₄ electrode modified with CdS and PANI exhibited a linear response in the concentration range of 0.1-20 μM with a sensitivity of 0.669 μA mM^-1 cm^-2 and a detection limit of 40 nM. Moreover, the PEC sensor exhibits good reproducibility and long-term stability. In summary, the designed materials have excellent electrochemical properties, which make them ideal candidates for PEC detection of GSH.

In Situ Synthesis of a Bismuth Vanadate/Molybdenum Disulfide Composite: An Electrochemical Tool for 3-Nitro-l-Tyrosine Analysis

The quantification of 3-nitro-l-tyrosine (NO₂-Tyr), an in vivo biomarker of nitrosative stress, is indispensable for the clinical intervention of various inflammatory disorders caused by nitrosative stress. By integrating the unique features of BiVO₄ and MoS₂ with matching bandgap energies, electrode materials with amplified response signals can be developed. In this regard, we introduce a hydrothermally synthesized bismuth vanadate sheathed molybdenum disulfide (MoS₂@BiVO₄) heterojunction as a highly sensitive electrode material for the determination of NO₂-Tyr. Excellent electrochemical behavior perceived for the MoS₂@BiVO₄ augments the performance of the sensor and allows the measurement of NO₂-Tyr in biological media without any time-consuming pretreatments. The synergistic interactions between BiVO₄ and MoS₂ heterojunctions contribute to low resistance charge transfer (R_ct = 159.13 Ω·cm²), a reduction potential E_pc = -0.58 V (vs Ag/AgCl), and a good response range (0.001-526.3 μM) with a lower limit of detection (0.94 nM) toward the detection of NO₂-Tyr. An improved active surface area, reduced charge recombination, and high analyte adsorption contribute to the high loading of the biomarker for improved selectivity (in the presence of 10 interfering compounds), operational stability (1000 s), and reproducibility (six various modified electrodes). The proposed sensor was successfully utilized for the real-time determination of NO₂-Tyr in water, urine, and saliva samples with good recovery values (±98.94-99.98%), ascertaining the reliability of the method. It is noteworthy that the electrochemical activity remains unaffected by other redox interferons, thus leading to targeted sensing applications.