Atomic force microscope tracking observation of Chinese hamster ovary cell mitosis

Applications of atomic force microscopy in immunology

Cellular mechanics, a major regulating factor of cellular architecture and biological functions, responds to intrinsic stresses and extrinsic forces exerted by other cells and the extracellular matrix in the microenvironment. Cellular mechanics also acts as a fundamental mediator in complicated immune responses, such as cell migration, immune cell activation, and pathogen clearance. The principle of atomic force microscopy (AFM) and its three running modes are introduced for the mechanical characterization of living cells. The peak force tapping mode provides the most delicate and desirable virtues to collect high-resolution images of morphology and force curves. For a concrete description of AFM capabilities, three AFM applications are discussed. These applications include the dynamic progress of a neutrophil-extracellular-trap release by neutrophils, the immunological functions of macrophages, and the membrane pore formation mediated by perforin, streptolysin O, gasdermin D, or membrane attack complex.

Fractal Dimension of Erythrocyte Membranes: A Highly Useful Precursor for Rapid Morphological Assay

Morphology of erythrocyte membrane has been recognized as an alternative biomarker of several patho-physiological states. Numerous attempts have been made to upgrade the existing method of primitive manual counting, particularly exploring the light scattering properties of erythrocyte. All the techniques are at best semi-empirical and heavily rely on the effectiveness of the statistical correlations. Precisely, this is due to the lack of a non-empirical scale of the so-called "morphological scores". In this article, fractal dimension of erythrocyte membrane has been used to formulate a suitable scoring scale. Subsequently, the rapid experimental output of flow-cytometry has been functionally related to the mean morphological quantifier of the whole cell population via an optimum neural network model (R² = 0.98). Moreover, the fractal dimension has been further demonstrated to be an important parameter in early detection of an abnormal patho-physiological state, even without any noticeable poikilocytic transformation in micrometric domain.

Insulin-producing cells from human adipose tissue-derived mesenchymal stem cells detected by atomic force microscope

We successfully differentiated human adipose tissue-derived mesenchymal stem cells (haMSCs) into insulin-producing cells (IPCs) in vitro and did not use any insulin which might be absorbed by cells during in vitro culture. Expression of insulin gene was massively increased by 28,000-fold at day 12 compared with haMSCs (P < 0.05). IPCs could secrete insulin after glucose was stimulated. The higher the concentration of glucose, the more production of insulin was noted. We reported AFM images of IPCs for the first time. AFM images showed that the sizes of cells were similar to each other, and all IPC surface had a porous structure in the cytoplasm area. In sugar-free group, the size of holes was similar (diameter, 1,086.98 ± 156.70 nm; depth, 185.22 ± 52.14 nm). In higher sugar-stimulated group, there were more holes with bigger diameter and smaller depth. (diameter, 3,183.65 ± 2,229.18 nm; depth 109.42 ± 56.26 nm, P < 0.05). We found that the hole diameter and depth could change with the concentration of glucose in media. Concurrently, laser scanning confocal microscopy images indicated that cortical actin network beneath plasma membrane in IPCs was dense and continuous. After glucose stimulation, we found the actin web depolymerized and became discontinuous in IPCs. We speculated that diameter augmentation of holes located in the cytoplasm area in IPCs was one manifestation of excytosis increase.

The procoagulant properties of hyaluronic acid-collagen (I)/chitosan complex film

Biomaterial-induced human platelet activation remains one of the most crucial factors to determine the procoagulant properties of the biomaterial. In this experiment, a new type of biomacromolecule complex film (hyaluronic acid-collagen (I)/chitosan, HCC) was prepared using the electrostatic self-assembly method. Then the procoagulant properties of this complex film were characterized. Based on the nano-resolution of atomic force microscopy, the platelet-derived microparticles (PMPs) that present the activation of platelets were clearly visualized on the membrane surface of platelets for the first time, and the measurement indicated that the size of PMPs is around 50-110 nm. Furthermore, the results of AFM measurement were confirmed by flow cytometry analysis. The expression of CD62P (P-selectin) dramatically increased after the platelet-rich plasma interacted with the biomaterial solution. From the results, we could draw the conclusion that this biomacromolecule complex film has promising procoagulant properties, and has the potential to be practically used as procoagulant material.

Effects of etchant on the nanostructure of dentin: an atomic force microscope study

The objective of this study is to investigate effects of etchant on dentin surface as a function of etching time by atomic force microscopy (AFM). Twenty intact, freshly extracted noncarious human teeth were used to make 40 dentin discs and the discs were randomly divided into 4 groups. A commercial etchant was applied on these dentin discs. The main component of the etchant is 32% phosphoric acid and the etching time for the four dentin disc groups was 0, 20, 40, and 60 s. The AFM results show progressive changes of the surface morphology as the etching time increases. Significant difference of average roughness (Ra) exists in the dentin surface among all four groups (p<0.05). The statistic difference of diameters of dentinal tubule orifice (Dt) exists between the control group and all other groups (p<0.05), whereas the Dts for the 40-s group and 60-s group are not statistically different (p>0.05). Our results showed that acid treatment has a significant influence on dentin demineralization and the effective etching time of the dentin surface appears to be 60 s. We provide a new nanoscale insight into the dentin surface treatment and this can help us to select the optimal etching time in clinic.

The analysis of morphological distortion during AFM study of cells

Atomic force microscopy (AFM) has been widely applied in cellular morphology study. However, morphological information including volume and roughness obtained by AFM are usually affected by different kinds of factors, which include the microscopic system itself, imaging mode, or external factors such as AFM probe or tip condition. In this study, based on red blood cell model, the dependence of cellular morphology, volume, and roughness on several parameters of the imaging was evaluated and, furthermore, a general rule and resolution for trustful analysis had been suggested. In addition, the potential effects that resulted from sample itself had also been analyzed based on adhesive force analysis. The results indicated that the scanning range and the imaging mode affect cellular volume and roughness, and the distorted images should be ascribed to blunt tip, contaminated tip, and the shape of tip. The analysis of morphological distortion during AFM investigation of cells provides a reference for researchers using AFM.

Surface ultrastructure and mechanical property of human chondrocyte revealed by atomic force microscopy

OBJECTIVE

The mechanical properties of chondrocytes influence maintenance of the articular cartilage extracellular matrix. To differentiate the mechanical properties of chondrocytes between a young, normal modulus and an old, osteoarthritic (OA) modulus, we used an atomic force microscope (AFM) to probe the surface ultrastructure and to measure their adhesion force and stiffness.

METHODS

We directly visualized a single chondrocyte cell by using AFM and quantitatively measured the dimensions of the cells.

RESULTS

Profiles displayed heights of 1026+/-203 and 1668+/-352 nm for old and young cells, respectively. Contour maps revealed differences in the sizes and structures of the two groups. Mean calculated adhesion forces differed between normal and OA chondrocytes (7.06+/-3.35 and 2.97+/-1.82 nN, respectively), as did calculated stiffness values (0.0960+/-0.009 and 0.0347+/-0.005 N/m, respectively).

CONCLUSION

These findings suggested that the mechanical properties of normal chondrocytes substantially differed from those of OA chondrocytes. We believe this study represents the first direct characterization of the surface ultrastructure and mechanical measurements of human chondrocytes between normal and OA stages. This new approach could be a useful technique for investigating age-related changes in the properties of human chondrocytes.

Cellular chemomechanics at interfaces: sensing, integration and response

Living cells are complex entities whose remarkable, emergent capacity to sense, integrate, and respond to environmental cues relies on an intricate series of interactions among the cell's macromolecular components. Defects in mechanosensing, transduction,or responses underlie many diseases such as cancers, immune disorders, cardiac hypertrophy, genetic malformations, and neuropathies. Here, we highlight micro- and nanotechnology-based tools that have been used to study how chemical and mechanical cues modulate the responses of single cells in contact with the extracellular environment. Understanding the physical aspects of these complex processes at the micro- and nanometer scale could produce profound and fundamental new insights into how the processes of cell migration, metastasis, immune function and other areas which are regulated by mechanical forces.