High NO oxidation catalytic activity on non-noble metal based cobalt-ceria catalyst for diesel soot oxidation

Single particle mass spectral signatures from on-road and non-road vehicle exhaust particles and their application in refined source apportionment using deep learning

With advances in vehicle emission control technology, updating source profiles to meet the current requirements of source apportionment has become increasingly crucial. In this study, on-road and non-road vehicle particles were collected, and then the chemical compositions of individual particles were analyzed using single particle aerosol mass spectrometry. The data were grouped using an adaptive resonance theory neural network to identify signatures and establish a mass spectral database of mobile sources. In addition, a deep learning-based model (DeepAerosolClassifier) for classifying aerosol particles was established. The objective of this model was to accomplish source apportionment. During the training process, the model achieved an accuracy of 98.49 % for the validation set and an accuracy of 93.36 % for the testing set. Regarding the model interpretation, ideal spectra were generated using the model, verifying its accurate recognition of the characteristic patterns in the mass spectra. In a practical application, the model performed hourly source apportionment at three specific field monitoring sites. The effectiveness of the model in field measurement was validated by combining traffic flow and spatial information with the model results. Compared with other machine learning methods, our model achieved highly automated source apportionment while eliminating the need for feature selection, and it enables end-to-end operation. Thus, in the future, it can be applied in refined and online source apportionment of particulate matter.

Low-temperature NO oxidation using lattice oxygen in Fe-site substituted SrFeO3-δ

Improvement of the low-temperature activity for NO oxidation catalysts is a crucial issue to improve the NO_x storage performance in automotive catalysts. We have recently reported that the lattice oxygen species in SrFeO_3-δ (SFO) are reactive in the oxidation of NO to NO₂ at low temperatures. The oxidation of NO using lattice oxygen species is a powerful means to oxidize NO in such kinetically restricted temperature regions. This paper shows that Fe-site substitution of SFO with Mn or Co improves the properties of lattice oxygen such as the temperature and amount of oxygen release/storage, resulting in the enhancement of the activity for NO oxidation in a low-temperature range. In particular, NO oxidation on SrFe_0.8Mn_0.2O_3-δ is found to proceed even at extremely low temperatures <423 K. From oxygen release/storage profiles obtained by temperature-programmed reactions, Co doping into SFO increases the amount of released oxygen owing to the reducibility of the Co species and promotes the phase transformation to the brownmillerite phase. On the other hand, Mn doping does not increase the oxygen release amount and suppresses the phase transformation. However, it significantly decreases the oxygen migration barrier of SFO. Substitution with Mn renders the structure of SFO more robust and maintains the perovskite structure after the release of oxygen. Thus, the oxygen release properties are strongly dependent on the crystal structure change before and after oxygen release from the perovskite structure, which has a significant effect on NO oxidation and the NO_x storage performance.

Highly improved soot combustion performance over synergetic MnxCe1-xO2 solid solutions within mesoporous nanosheets

Constructing synergetic bimetal oxide solid solutions with exceptional catalytic performances for efficient soot elimination is becoming a research frontier in environmental catalysis. Herein, synergetic Mn_xCe_1-xO₂ solid solutions within mesoporous nanosheets, synthesized by a facile hydrothermal method for the first time, have been performed to catalyze the NO_x-assisted soot combustion. Research results validate that Mn_xCe_1-xO₂ solid solutions displayed highly improved soot combustion performance with respect to activity and selectivity, mainly due to the synergetic effect by combining factors of the unique mesoporous nanosheet-shaped feature, the enhanced chemical nature stemmed from high-valence Mn species, abundant active oxygen species originated from the enriched oxygen vacancies and the escalated redox properties. Furthermore, the enhanced NO_x storage and oxidation abilities, mainly derived from integrating reciprocal merits of high-valence Mn species and CeO₂, were also responsible for the highly improved soot combustion performance via NO_x-assisted mechanism. Moreover, Mn_xCe_1-xO₂ solid solutions also exhibited excellent reusability due to the unique morphological structure and stable crystal phase, showing good potential in practical applications.

Efficient Waste to Energy Conversion Based on Co-CeO2 Catalyzed Water-Gas Shift Reaction

Waste to energy technology is attracting attention to overcome the upcoming environmental and energy issues. One of the key-steps is the water-gas shift (WGS) reaction, which can convert the waste-derived synthesis gas (H2 and CO) to pure hydrogen. Co–CeO2 catalysts were synthesized by the different methods to derive the optimal synthetic method and to investigate the effect of the preparation method on the physicochemical characteristics of Co–CeO2 catalysts in the high-temperature water-gas shift (HTS) reaction. The Co–CeO2 catalyst synthesized by the sol-gel method featured a strong metal to support interaction and the largest number of oxygen vacancies compared to other catalysts, which affects the catalytic activity. As a result, the Co–CeO2 catalyst synthesized by the sol-gel method exhibited the highest WGS activity among the prepared catalysts, even in severe conditions (high CO concentration: ~38% in dry basis and high gas hourly space velocity: 143,000 h−1).

Effect of cobalt on titania, ceria and zirconia oxide supported catalysts on the oxidative depolymerization of prot and alkali lignin

The production of phenolics by oxidative depolymerization of prot lignin and alkali lignin were studied in the presence of cobalt impregnated TiO₂, CeO₂ and ZrO₂ catalysts at 140 °C for 1 h. Maximum bio-oil yield of 78.0 and 60.2 wt% were observed with Co/CeO₂ catalyst for prot lignin and alkali lignin, respectively. The characterizations of the bio-oils were carried out using GC-MS, FTIR, and ¹H NMR. The GC-MS compounds have been classified into four categories (G, H, S-type and others). The depolymerization of prot lignin showed a mixture of G, H and S type phenolic monomers. Interestingly, higher selectivity of acetosyringone (47.1%) was obtained in the presence of Co/TiO₂ catalyst with prot lignin. The depolymerization of alkali lignin exhibited only G-type phenolic monomers production, and was effectively produced 67.4% (G-type monomer) in the presence of Co/ZrO₂ catalyst.

The effects of Bi2O3 on the selective catalytic reduction of NO by propylene over Co3O4 nanoplates

Bi₂O₃/Co₃O₄ catalysts prepared by the impregnation method were investigated for the selective catalytic reduction of NO by C₃H₆ (C₃H₆-SCR) in the presence of O₂. Their physicochemical properties were analyzed with SEM, XRD, H₂-TPR, XPS, PL and IR measurements. It was found that the deposition of Bi₂O₃ on Co₃O₄ nanoplates enhanced the catalytic activity, especially at low reaction temperature. The SO₂ tolerance of Co₃O₄ in C₃H₆-SCR activity was also improved with the addition of Bi₂O₃. Among all catalysts tested, 10.0 wt% Bi₂O₃/Co₃O₄ achieved a 90% NO conversion at 200 °C with the total flow rate of 200 mL min^-1 (GHSV 30 000 h^-1). No loss in its C₃H₆-SCR activity was observed at different temperatures after the addition of 100 ppm of SO₂ to the reaction mixture. These enhanced catalytic behaviors may be associated with the improved oxidizing characteristics of 10.0 wt% Bi₂O₃/Co₃O₂. XRD results showed that Bi₂O₃ entered the lattice of Co₃O₄, resulting in the formation of lattice distortion and structural defects. H₂-TPR results showed that the reduction of Co₃O₄ was promoted and the diffusion of oxygen was accelerated with the addition of Bi₂O₃. XPS measurements implied that more Co³⁺ formed on the 10.0% Bi₂O₃/Co₃O₂ catalysts. The improved oxidizing characteristics of the catalyst with the addition of Bi₂O₃ due to the synergistic effect of the nanostructure hybrid, thus enhanced the C₃H₆-SCR reaction and hindered the oxidization of SO₂. Therefore, the 10.0% Bi₂O₃/Co₃O₄ catalyst exhibited the highest NO conversion and strongest SO₂ tolerance ability.

Ceria Nanoparticles’ Morphological Effects on the N2O Decomposition Performance of Co3O4/CeO2 Mixed Oxides

Ceria-based oxides have been widely explored recently in the direct decomposition of N2O (deN2O) due to their unique redox/surface properties and lower cost as compared to noble metal-based catalysts. Cobalt oxide dispersed on ceria is among the most active mixed oxides with its efficiency strongly affected by counterpart features, such as particle size and morphology. In this work, the morphological effect of ceria nanostructures (nanorods (ΝR), nanocubes (NC), nanopolyhedra (NP)) on the solid-state properties and the deN2O performance of the Co3O4/CeO2 binary system is investigated. Several characterization methods involving N2 adsorption at −196 °C, X-ray diffraction (XRD), temperature programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (ΤΕΜ) were carried out to disclose structure–property relationships. The results revealed the importance of support morphology on the physicochemical properties and the N2O conversion performance of bare ceria samples, following the order nanorods (NR) > nanopolyhedra (NP) > nanocubes (NC). More importantly, Co3O4 impregnation to different carriers towards the formation of Co3O4/CeO2 mixed oxides greatly enhanced the deN2O performance as compared to bare ceria samples, without, however, affecting the conversion sequence, implying the pivotal role of ceria support. The Co3O4/CeO2 sample with the rod-like morphology exhibited the best deN2O performance (100% N2O conversion at 500 °C) due to its abundance in Co2+ active sites and Ce3+ species in conjunction to its improved reducibility, oxygen kinetics and surface area.

Highly enhanced soot oxidation activity over 3DOM Co3O4-CeO2 catalysts by synergistic promoting effect

Three-dimensionally ordered macroporous (3DOM) Co₃O₄-CeO₂ catalysts with controllable Co/Ce molar ratios synthesized by colloidal crystal template method were developed to catalyze the NO_x-assisted soot oxidation for the first time, and the obtained 3DOM Co₃O₄-CeO₂ catalysts exhibited highly enhanced soot oxidation activity. Detailed characterizations of 3DOM Co₃O₄-CeO₂ catalysts revealed that the highly enhanced soot oxidation activity was originated from the synergistic promoting effect by combining the macroporous effect resulted from the unique 3DOM framework, the chemical nature associated with more Co³⁺ reactive sites, the surface enrichment of Ce species and the improved redox properties. Meanwhile, the high NO_x storage and oxidation capacity resulted from the integrated respective merits of Co₃O₄ and CeO₂ also accounted for the enhanced soot oxidation activity via NO_x-assisted mechanism. Furthermore, the 3DOM Co₃O₄-CeO₂ catalysts demonstrated strong stability because of the surface enrichment of Ce species improving the thermal stability and the robust 3DOM framework inhibiting the structural collapse, showing their potential applications under practical conditions.

Promotional effect of cobalt addition on catalytic performance of Ce0.5Zr0.5O2 mixed oxide for diesel soot combustion

A series of Co-modified Ce

Mesoporous CexCo1−xCr2O4 spinels: synthesis, characterization and catalytic application in simultaneous removal of soot particulate and NO

The foamy Ce_0.1Co_0.9Cr₂O₄ spinel catalysis showed favorable catalytic conversion for soot oxidation and NO reduction.

Cobalt supported on metal-doped ceria catalysts (M = Zr, Sn and Ti) for NO oxidation

The higher catalytic of Ce–Co was due to higher amount of finely dispersed cobalt species, more oxygen vacancies and excellent redox ability.

Ligand/cluster/support catalytic complexes in heterogeneous ultrananocatalysis: NO oxidation on Ag3/MgO(100)

The Ag₃(CO₃)/MgO(100) complex transforms in the presence of NO and O₂ into a highly active Ag₃(CO₃) (NO₂)₂/MgO(100) NOox catalyst.