Ionic liquid based high performance electrochemical sensor for ascorbic acid in various foods and pharmaceuticals

An electrochemical sensor based on electrodeposited methylene blue on a carbon nanotube decorated hydrogel for the detection of ascorbic acid

In this study, a self-assembled electrochemical sensor was prepared by coating with a carbon nanotube (CNT) decorated hydrogel (HG) combined with electrodeposition of methylene blue (MB), and then used for the detection of ascorbic acid (AA). The three-dimensional network of HG has the advantages of large electroactive surface area, rapid diffusion and electron transfer rate, strong adhesive ability and stabilization of the polymerized MB. The MB provides high electrocatalytic activity and works as an electron transfer mediator to facilitate the oxidation of AA. The successful synthesis of the hydrogel and the preparation of the sensor are confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The layer-by-layer assembly was identified by AFM with the heights of 22.1 nm and 186.8 nm for the hydrogel and MB layers, respectively. Under the optimal conditions, the sensor has a linear range of 0.1 mM to 10 mM and a detection limit of 0.05 mM. What's more, the prepared sensor also exhibits good stability (current retention of 91.22% after 100 cycles for testing 0.25 mM AA), excellent anti-interference ability, good reproducibility (RSD of 4.26% for five independent experiments), excellent operational stability (RSD of 1.66% for 30 consecutive AA additions), fast response time (<4 s) and shows satisfactory results in the detection of AA in vitamin C tablets.

Electrochemical Detection of Ascorbic Acid by Fe₂O₃ Nanoparticles Modified Glassy Carbon Electrode

Background  The article delineates a strategy for detecting ascorbic acid (AA) through the use of iron oxide (Fe₂O₃) nanoparticles on an electrode. The Fe₂O₃ nanoparticles demonstrated effective electrocatalysis in the oxidation of AA, resulting in increased peak currents. The sensor showcased a wide linear detection range, a low detection limit, and high selectivity towards interferents, making it suitable for accurate AA measurement in food analysis and medical diagnostics applications. This emphasizes the potential of Fe₂O₃ nanoparticle-based sensors for precise AA detection. Aim The primary aim of this research is to develop an electrochemical sensing technique for the identification of ascorbic acid, with the use of Fe₂O₃ nanoparticles as the sensing matrix. Materials and methods The synthesis process involved the utilization of FeCl3.6H2O, ammonia solution, ethanol, and double-distilled water. FeCl3.6H2O was dissolved in ammonia water to produce a brown precipitate for the synthesis of Fe₂O₃ nanoparticles. Subsequently, the brown precipitate underwent hydrothermal treatment at 180 °C, resulting in the formation of a red product. Following centrifugation, washing, and drying steps, Fe₂O₃ nanoparticles were successfully synthesized. These nanoparticles were then utilized to modify the glassy carbon electrode (GCE). Prior to the modification, the GCE underwent polishing and cleaning procedures, after which it was coated with a suspension containing 5 mg of Fe₂O₃ nanoparticles in 10 mL of ethanol. The coated electrode was dried and deemed ready for application in electrochemical sensing. Results The hydrothermal method was employed in this research to synthesize Fe₂O₃ nanoparticles, which were subsequently subjected to a series of experiments to evaluate their electrochemical sensing capabilities. The resulting Fe₂O₃ nanoparticles were determined to possess a high level of purity and a crystalline structure through various analyses, including field emission-scanning electron microscopy (FE-SEM), cyclic voltammetric testing, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy analysis, differential pulse voltammetry (DPV), and the current response of the Fe₂O₃-modified electrode towards ascorbic acid. The morphology of the Fe₂O₃ nanoparticles was observed to be uniform. The synthesized particles successfully fulfilled the study's objective by exhibiting remarkably sensitive and selective sensitivity towards ascorbic acid. Conclusion Our study underscores the potential of utilizing Fe₂O₃ nanoparticle-based electrochemical sensing to detect ascorbic acid, as evidenced by the notably high sensitivity of ascorbic acid towards Fe₂O₃ nanoparticles. The distinctive properties of Fe₂O₃ nanoparticles, which include their large surface area, efficient electron transport, and straightforward manufacturing process, significantly enhance the sensor's performance. Further research is crucial to exploring the wide-ranging applications of the sensor in fields such as food safety, environmental monitoring, and biological diagnostics and to overcome any existing limitations.

The Synthesis of FeS and Investigation on Electrochemical Sensing Toward Neuroprotector

Background Electrochemical sensing is a versatile field that uses electrochemistry concepts to detect and measure various substances. It finds applications in clinical diagnostics and environmental monitoring. Scientists are currently working on creating reliable electrochemical sensing devices that can accurately detect ascorbic acid. Iron sulfide (FeS) has emerged as a promising material for these sensors due to its excellent electrical conductivity, catalytic activity, and stability.  Materials and methods The FeS nanoparticles were synthesized through the hydrothermal method of synthesis. The glassy carbon electrode (GCE) with a surface area of 0.071 cm2 was modified with FeS before the working electrode was mechanically polished with 1 µm, 0.3 µm, and 0.05 µm alumina pastes for mirror finishing. Then it was subjected to ultrasonication in double distilled water for a few minutes to clean the surface of GCE. The FeS suspension was prepared by dispersing 5 mg of FeS in 10 mL of ethanol during 20 minutes of ultrasonic agitation then the GCE was coated with 10 μL of the suspension by drop coating method and dried in air. Results In this study, FeS nanoparticles were synthesized by the hydrothermal method of synthesis, and it was tested for their electrochemical sensing properties by various tests. Based on the field emission-scanning electron microscope (FE-SEM) analysis, scan rate effect test, cyclic voltammetric test, X-ray diffraction (XRD), and energy-dispersive X-ray (EDX) spectroscopy analysis done and results obtained, it was seen that the synthesized FeS nanoparticles are highly pure and have a crystalline structure. FeS has an even morphology. The synthesized particles also showed highly sensitive and specific sensing toward ascorbic acid when compared to unmodified 10.1 µA electrodes with a sensing value of 12.51 μA, thereby fulfilling the aim of this study. Conclusion Based on the outcomes of the diverse tests carried out, it is evident that the sample displayed a high crystalline nature as indicated by the XRD test. Additionally, the sample exhibited a uniform morphology, exceptional stability, and remarkable sensitivity. The developed FeS-based electrochemical sensor was found to be exceptionally pure and showed excellent performance, showcasing both high sensitivity and selectivity toward ascorbic acid.

Accuracy improvement via novel ratiometry design in distance-based microfluidic paper based analytical device: instrument-free point of care testing

Developing accurate, precise, instrument-free, and point-of-need microfluidic paper-based devices is highly significant in clinical diagnosis and biomedical analysis. In the present work, a ratiometric distance-based microfluidic paper-based analytical device (R-DB-μPAD), along with a three-dimensional (3D) multifunctional connector (spacer), was designed to improve the accuracy and detection resolution analyses. Specifically, the novel R-DB-μPAD was used for the accurate and precise detection of ascorbic acid (AA) as a model analyte. In this design, two channels were fabricated as detection zones, with a 3D spacer located between the sampling and detection zones to improve the detection resolution by preventing the reagents mixing from overspreading between these zones. Two probes for AA were used: Fe³⁺ and 1,10-phenanthroline were deposited in the first channel, and oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) was added to the second channel. Accuracy improvement of this ratiometry-based design was achieved by enhancing the linearity range and reducing the volume dependency of the output signal. Moreover, the 3D connector improved the detection resolution by eliminating the systematic errors. Under the optimal conditions, the ratio of the distances of the color bands in the two channels was used to construct an analytical calibration curve in the range from 0.05 to 1.2 mM, with a limit of detection of 16 μM. The proposed R-DB-μPAD combined with the connector was successfully used for the detection of AA in orange juice and vitamin C tablets with satisfactory accuracy and precision. This work opens the door for multiplex analysis of various analytes in different matrices.

Electrochemical sensing system for the analysis of emerging contaminants in aquatic environment: A review

This survey distinguishes understudied spaces of arising impurity research in wastewaters and the habitat, and suggests bearing for future checking. Thinking about the impeding effect of toxins on human wellbeing and biological system, their discovery in various media including water is fundamental. This review sums up and assesses the latest advances in the electrochemical detecting of emerging contaminants (ECs). This survey is expected to add to the advancement in electrochemical applications towards the ECs. Different electrochemical insightful procedures like Amperometry, Voltammetry has been examined in this overview. The improvement of cutting edge nanomaterial-based electrochemical sensors and biosensors for the discovery of drug compounds has accumulated monstrous consideration because of their benefits, like high affectability and selectivity, continuous observing, and convenience has been reviewed in this survey. This survey likewise features the diverse electrochemical treatment procedures accessible for the removal of ECs.

A Cd(ii)-organic framework as a highly sensitive and rapid fluorometric sensor for ascorbic acid in aqueous medium

A new Cd(ii) MOF was used as a fluorometric sensor for ascorbic acid in water, fruits, vegetables and human urine.

Cytochrome c/Multi-walled Carbon Nanotubes Modified Glassy Carbon Electrode for the Detection of Streptomycin in Pharmaceutical Samples

A novel electrochemical glassy carbon electrode modified with a multi-walled carbon nanotube, cytochrome c (Cyt c) and zinc oxide nanoparticles (ZnONPs) was fabricated to increase the sensitivity of electrode for the detection of streptomycin (STN) in certain pharmaceutical samples. Cyclic voltammetry (CV) and differential pulse voltammetry techniques were used for an electrochemical characterization of the electrode. Furthermore, the electrochemical biosensor construction phases were examined by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Under the optimal experimental conditions, the electrode offers a high selectivity and sensitivity signaling in the co-existence method of STN with the linear concentration ranging from 0.02 to 2.2 μM. The detection limits (LOD) and limit of quantification (LOQ) were found to be 0.0028 and 0.0562 μM, respectively. The fabricated sensing electrode has good stability, reproducibility and sensitivity towards STN in the pharmaceutical samples. Preliminary determinations of binding sites within the specified grid box size, which covers both Cyt c and STN, were done by molecular docking analysis. Moreover, density functional theory (DFT) computations were performed to provide insightful information into the optimized geometry of STN.

Electrochemical Biosensor for the Detection of Amygdalin in Apple Seeds with a Hybrid of f-MWCNTs/CoFe2O4 Nanocomposite

Background:

Amygdalin is a natural compound known for curing cancer. It is seen in several plants including in bitter almonds, apricots, peaches, apples, and plum seeds (kernels). Amygdalin is a toxic molecule containing a nitrile group, due to which toxic cyanide anion releases by the action of a β-glucosidase. The consumption of amygdalin may lead to cyanide poisoning in the human body. Therefore, for the first time, this work is aimed at developing a novel electrochemical biosensor for the detection of Amygdalin (AMG) in apple seed samples.

Methods:

The proposed electrochemical biosensor was fabricated by immobilizing cytochrome c (Cyt c) on a Glassy Carbon Electrode (GCE) with nanocomposite of cobalt ferrite nanoparticles (CoFe2O4 NPs) and functionalised multiwalled carbon nanotubes (f-MWCNTs). The characterization of the synthesized nanocomposite was performed with FTIR, TEM, TGA/DSC, and XRD techniques. Moreover, various experimental parameters such as the effect of pH, deposition time, sweep rate, potential, and enzyme incubation time and interference were also studied.

Results:

The fabricated biosensor enhanced the peak current by 10-folds compared to unmodified GCE. Under optimized experimental conditions, the biosensor exhibited linear response from 2 to 20 μM, with a linear regression equation Ipa (μA) = 8.4989 c + 6.6307 (R² = 0.9927). The LOD’s and LOQ’s were found to be 0.0112 μM and 0.2213 μM, respectively.

Conclusion:

The designed biosensor was successfully applied for the analysis of AMG content in the apple seed samples. The outcomes of this study identify the efficient electrocatalytic activity of the fabricated nanocomposite as significant electronic factors as major contributors to the electron transfer mechanism, with promising scope for the design of biosensor to sense toxic molecules.

A boron nitride electrode modified with a nanocomposite prepared from an ionic liquid and tungsten disulfide for voltammetric sensing of 4-aminophenol

Boron nitride (BN) was used as a support and covered with an ionic liquid (IL) and tungsten disulfide (WS₂) nanoparticles to obtain an electrode for the determination of 4-aminophenol (4-AP). BN was prepared using a "solvent cutting" method, and the BN-IL-WS₂ nanocomposite was obtained by an ultrasonic method. BN and its hybrids were characterized by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. When the BN-IL-WS₂ composites were coated on the surface of the electrode, the response to 4-AP was strongly amplified due to the strong synergetic effect between the three materials. The voltammetric response of the modified sensor (with a maximum at 0.29 V vs. Ag/AgCl) in solutions with a pH of 6 is linear in the 0.01-50 μΜ 4-AP concentration range, and the limit of detection is 3 nM. A modified glassy carbon electrode was applied for the determination of 4-AP in seawater and dispersions containing paracetamol tablets. The results were consistent with those obtained by HPLC. Graphical abstract Schematic representation of the voltammetric determination process of 4-aminophenol (4-AP). The electrochemical sensor based on the glassy carbon electrode modified with boron nitride (BN), ionic liquid (IL) and tungsten disulfide (WS₂) nanomaterials. They, exhibit an excellent performance compared with other electrodes.

Enhancing a clenbuterol immunosensor based on poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube performance using response surface methodology

Clenbuterol (CLB) is an illegal antibiotic for livestock, which is misused as a growth promoter drug. In this study, an immunosensor modified with poly(3,4-ethylenedioxythiophene) (PEDOT), multi-walled carbon nanotubes (MWCNT) and anti-clenbuterol antibody (Ab) was developed for the detection of CLB. A screen-printed carbon electrode (SPCE) was modified with PEDOT/MWCNT as a sensor platform before immobilizing Ab for specific CLB binding through a competitive-type immunoassay. Free CLB in the sample solution competed with clenbuterol-horseradish peroxide (CLB-HRP) to bind with Ab. A high current signal was obtained after optimization of the electrochemical immunoassay conditions (pH, incubation temperature, antigen (Ag) incubation time and % blocking) using the response surface methodology/central composite design (RSM/CCD). The developed immunosensor is highly reproducible and sensitive with good storage stability, which are necessary for practical application. In real sample application, this immunosensor produces comparable results with liquid chromatography-mass spectrometry; thus, it is useful for CLB screening and monitoring in real meat samples.

Self-Assembled Curved Macroporous Photonic Crystal-Based Surfactant Detectors

Surfactants are extensively used as detergents, dispersants, and emulsifiers. Thus, wastewater containing high-concentration surfactants discharged to the environment pose a serious threat to the ecosystem. Unfortunately, conventional detection methods for surfactants suffer from the use of sophisticated instruments and cannot perform detections for various surfactants by a single analysis. The article reports the development of simple and sensitive surfactant detection using doctor-blade-coated three-dimensional curved macroporous photonic crystals on a cylindrical rod. The photonic crystals exhibit different hydrophobicities at various angular positions after surface modification. The penetration of aqueous surfactant solutions in the interconnected macropores causes red-shift as well as reduction in amplitude in the optical stop bands, resulting in surfactant detection with visible readout. The correlation between the surface tension, as well as the solution-infiltrated angular position, and the concentration of aqueous surfactant solutions has also been investigated in this study.