Packed bed column studies on the removal of emulsified oil from water using raw and modified bagasse and corn husk

Preparation of wheat straw-supported Nanoscale Zero-Valent Iron and its removal performance on ciprofloxacin

Wheat straw-supported Nanoscale Zero-Valent Iron particles (WS-NZVI) were successfully synthesized, which were used for Ciprofloxacin hydrochloride (CIP) removal in simulation wastewater. The structure, chemical composition and micro-morphology of WS-NZVI and Nanoscale Zero-Valent Iron (NZVI) were characterized by scanning electron microscopy analysis (SEM), X-ray diffraction (XRD), as well as the Fourier Transformed IR spectra (FT-IR). XRD results proved the existence of Fe°, and SEM images indicated that the agglomeration of NZVI was effectively inhibited when loaded on wheat straw. Besides, the effects of initial solution pH, CIP concentration, adsorbents dosage and contacting time on the removal efficiency of CIP by WS-NZVI and NZVI were investigated. The experimental results showed that, compared with NZVI and wheat straw, WS-NZVI possessed higher removal efficiency for CIP, and the maximum removal capacity of CIP by WS-NZVI was 363.63 mg g^-1 (25 °C). Furthermore, WS-NZVI was suitable for wider pH range (pH = 4-10) in comparison with NZVI. For the WS-NZVI, the kinetic was better fitted with pseudo-second-order equation, rather than pseudo-first-order equation. The Mass spectrometry (MS) analysis deduced that the degradation reaction mainly occurred on quinolone groups piperazinyl ring. Therefore, it is feasible that using wheat straw as a support material to enhance the performance of NZVI, and the synthesized WS-NZVI has a potential in the organic compounds elimination because of its redox reaction activity.

Treatment and reclamation of hydrocarbon-bearing oily wastewater as a hazardous pollutant by different processes and technologies: a state-of-the-art review

Hydrocarbon-containing oily wastewater generated by various industries creates a major environmental problem all over the world since petroleum products are commonly used as energy sources and raw materials in various industries. In case of offshore/coastal oil recovery operations, produced water is discharged through either shore side outfalls or coastal rim releases. In many cases, current disposal practices leads to severe environmental pollution by contamination of petroleum hydrocarbon to the surface, ground, and coastal waterways. Therefore, it is necessary to evaluate the performance of various processes for the recovery of petroleum hydrocarbons from wastewater. In this paper, a detailed review on the different separation/treatment processes of oily wastewater is presented. Previous and recent research works are reviewed in the area of oil-water separation from wastewater and also highlight the new developments in these areas. Various separation processes and technologies such as gravity separation, flotation process, membrane process, adsorption process, biological treatment, freeze/thaw process, and photocatalytic oxidation process (PoPs)/advanced oxidation processes (AoPs) are discussed and reviewed. The adsorption properties of a wide variety of porous sorbent materials in oily wastewater treatment, particularly in the area of oil spill cleanup, are also reviewed. The advantages and disadvantages of each process are critically discussed and compared.