Insights into the efficient water treatment over N-doped carbon nanosheets with layered minerals as template: The role of interfacial electron tunneling and transfer

Peroxymonosulfate (PMS) oxidation reactions have been extensively studied recently. Due to the high material cost and low catalytic capability, PMS oxidation technology cannot be effectively applied in an industrial water treatment process. In this work, we developed a modification strategy based on enhancing the neglected electron tunneling effect to optimize the intrinsic electron transport process of the catalyst. The 2D nitrogen-doped carbon-based nanosheets with small interlayer spacing were prepared by self-polymerization of dopamine hydrochloride inserted into the natural layered bentonite template. Systematic characterizations confirmed that the smaller layer spacing in the 2D nitride-doped carbon-based nanosheets reduces the depletion layer width. The weak electronic shielding effect derived by the small layer spacing on the material subsurface enhanced the bulk electron tunneling effect. More bulk electrons could be migrated to the catalyst surface to activate PMS molecules. The PMS activation system showed ultrafast oxidation capability to degrade organic pollutants and strong ability to resist interference from environmental matrixes due to the optimized electron transfer process. Furthermore, the developed membrane reactor exhibited strong catalytic stability during the continuous degradation of P-Chlorophenol (CP).

Experimental Limits on Solar Reflected Dark Matter with a New Approach on Accelerated-Dark-Matter-Electron Analysis in Semiconductors

Recently a dark matter-electron (DM-electron) paradigm has drawn much attention. Models beyond the standard halo model describing DM accelerated by high energy celestial bodies are under intense examination as well. In this Letter, a velocity components analysis (VCA) method dedicated to swift analysis of accelerated DM-electron interactions via semiconductor detectors is proposed and the first HPGe detector-based accelerated DM-electron analysis is realized. Utilizing the method, the first germanium based constraint on sub-GeV solar reflected DM-electron interaction is presented with the 205.4  kg·day dataset from the CDEX-10 experiment. In the heavy mediator scenario, our result excels in the mass range of 5-15  keV/c^{2}, achieving a 3 orders of magnitude improvement comparing with previous semiconductor experiments. In the light mediator scenario, the strongest laboratory constraint for DM lighter than 0.1  MeV/c^{2} is presented. The result proves the feasibility and demonstrates the vast potential of the VCA technique in future accelerated DM-electron analyses with semiconductor detectors.

Coagulation performance and mechanism of different hydrolyzed aluminum species for the removal of composite pollutants of polyethylene and humic acid

Microplastics (MPs) and natural organic matter (NOM) composite pollutants have become emerging contaminants with potential threats. Coagulation has been widely used to remove MPs and NOM, but the underlying mechanisms for the removal of MPs-NOM composite pollutants by hydrolyzed Al species remain unclear. Therefore, the coagulation performance and mechanism of AlCl3, polyaluminum chloride with basicity of 2.2 (PAC22), and PAC25 in treating polyethylene (PE), humic acid (HA), and PE-HA composite systems were systematically investigated. The results showed that in the single PE system, PAC25 with hexagonal clusters achieved the maximum removal (68.09 %) (pH: 5, dosage: 0.5 mM) since adsorption bridging and sweeping effect were the main mechanisms for PE removal. The adsorption of HA on the PE surface enhanced its hydrophilicity and electrostatic repulsion, resulting in decreased PE removal. In the AlCl3-PE-HA system, the oligomeric Al first interacted with the -COOH and C-OH of HA through complexation, followed by the meso- and polymers of Al interacted with PE by electrostatic adsorption. The pre-formed medium polymeric Al species (Alb) and colloidal or solid Al species (Alc) in PAC22 and PAC25 formed complexes with the -OH and -COOH groups of HA, respectively, and then removed PE by adsorption bridging and sweeping effect.

New insights into the fate and interaction mechanisms of hydrolyzed aluminum-titanium species in the removal of aged polystyrene

Polyaluminum-titanium chloride composite coagulant (PATC) has been demonstrated to be a promising coagulant in microplastics (MPs) treatment. However, the interaction process between the dominant species of PATC and MPs remains unclear, which will hinder our understanding of the coagulation mechanisms. Here, the species transformation of PATC during its interaction with aged polystyrene powder (APSp) was studied. The results showed that the rise of O-containing functional groups in APSp increased the possibility of forming C-O-M coordination bonds and hydrogen bonds between APSp and PATC, which improved the removal of PSp. Furthermore, Al13(OH)53Ti13O17(H2O)204+ (Al13Ti13) was considered to be the most effective species of PATC. At pH 4, electrostatic attraction brought Al13Ti13 approached APSp first, followed by hydrogen bonding and complexation occurred, respectively. However, the Al13Ti13-APSp complexes were easily converted to monomers and dimers during coagulation, which influenced the coagulation efficiency. With the increase of pH, OH- in the solution would further polymerize the depolymerized Al2Ti into oligomers and mesomers. Under weakly acid conditions, the diversity of PATC hydrolysates and the increase in APSp binding sites correspondingly led to the maximum APSp removal of 75%. When the pH further increased to 10, PATC interacted with APSp mainly by hydrogen bonding and sweeping effect.

[Associations between risk factor control and survival among cancer patients]

Objective: This study aimed to evaluate the associations between the number of cardiovascular risk factor goals achieved with all-cause mortality, atherosclerotic cardiovascular diseases (ASCVD)-related mortality, and cancer-related mortality amongst cancer patients. Methods: From 2006 to 2020, a total of 2 079 individuals with newly diagnosed cancer, free of ASCVD, were enrolled in this study from the Kailuan cohort. Patients were classified into three groups (group 1,≤1 risk factor at goal, n=407; group 2, 2 risk factors at goal, n=865; group 3,≥3 risk factors at goal, n=807) according to the control status of blood pressure, fasting blood glucose, low-density lipoprotein cholesterol and high-sensitivity C-reactive protein, using health checkup results of the latest survey after cancer diagnosis. Multivariable Cox regression analyses were performed to examine the associations between the number of risk factors at goals with all-cause mortality, ASCVD-related mortality, and cancer-related mortality. Results: The mean age at diagnosis was (60.4±10.4) years, and 71.2% were male. During a median follow-up of 2.95 (1.38, 5.12) years, 600 cases of all-cause mortality, 63 cases of ASCVD-related mortality, and 314 cases of cancer-related mortality were observed. After adjusting for age, gender, education level, smoking status, alcohol consumption, salt intake, physical activity, body mass index, triglyceride, high-density lipoprotein cholesterol, family history of cardiovascular diseases, antihypertensive drugs, hypoglycemic drugs, lipid-lowering drugs, and anti-cancer medications, compared with cancer patients achieving ≤1 risk factor goal, those achieving ≥3 risk factor goals showed significantly decreased risk of all-cause mortality, ASCVD mortality, and cancer mortality, with HR (95%CI) of 0.68 (0.54-0.86), 0.35 (0.16-0.77), and 0.60 (0.43-0.82), respectively (all P values <0.05). Significant relationships between the number of risk factor goals achieved and decreased mortality of all kinds were observed (all P values for trend<0.05). Results of the subgroup analyses suggested that the associations between the number of risk factor goals achieved and lower mortality of all kinds were more prominent among individuals who were ≥60 years, male, and those with respiratory and reproductive cancers (all P values <0.05). Conclusions: This study suggested a significant association between the number of cardiovascular risk factor goals achieved and survival in cancer patients, especially amongst those who were older, male, with respiratory cancers and reproductive cancers.

Microcosmic mechanism analysis of the combined pollution of aged polystyrene with humic acid and its efficient removal by a composite coagulant

The composite pollutants formed by aged polystyrene (APS) and natural organic matter are complex and harmful, which lead to the deterioration of water quality. In this work, the interaction mechanism between humic acid (HA) and APS was discussed by investigating the changes in their functional groups. Besides, a novel polyaluminum-titanium chloride composite coagulant (PATC) was prepared, and its binding behaviors with HA@APS under different pH conditions were analyzed from a microscopic perspective. It was found that at pH 4, π-π conjugation was the dominant interaction between HA and APS. And the main removal mechanism of HA@APS by PATC was surface complexation. With the increase of pH, π-π conjugation, n-π electron donor-acceptor interaction (EDA), and hydrogen bonding gradually dominated the interaction between APS and HA. At pH 7, PATC hydrolyzed to form various polynuclear Al-Ti species, which could meet the demand for different binding sites of HA@APS. Under alkaline conditions, HB and n-π EDA in HA@APS were weakened, while π-π conjugation held a dominant position again. At this time, the main coagulation mechanism of PATC changed from charge neutralization to sweeping action, accompanied by hydrogen bonding. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) have attracted the public's attention due to their potential toxicity to humans. The combined pollution of aged microplastics and humic acid (HA) will bring great harm to aquatic environment. The development of novel composite coagulants is hopeful to efficiently remove MPs and their combined pollutants. Elucidating the interactions between HA and aged MPs is helpful to understand the transformation and fate of MPs in actual environments, and to reveal the removal mechanism of composite pollutants by coagulation. The findings presented here will provide theoretical guidance for addressing the challenges of coagulation technology in treating new pollutants in practice.

Intrinsic mechanism for the removal of antibiotic pollution by a dual coagulation process from the perspective of the interaction between NOM and antibiotic

Antibiotics bring potential risks to human health and ecosystem, and their coexistence with natural organic matters (NOMs) could have harmful impacts on the environment. Herein, a polyaluminium chloride (PAC)-polydimethyl diallyl ammonium chloride (PDMDAAC) dual coagulation process was designed to remove the co-pollutants of chlortetracycline (CTC) and humic acid (HA), representing antibiotics and NOMs, respectively. The main research strength was given to understand molecular interactions and their mechanisms associated with the coagulation and flocculation. We found that the co-existing HA and CTC increased the hydrophily and stability of contaminants, and generated HA@CTC complexes with large particles size. The interaction mechanism between CTC and HA was mainly hydrogen bonding, hydrophobic association action, n-π* electron donor-acceptor interaction, and π-π* conjugation. Lewis acid-base interaction was the main force between HA and CTC. The bonding energies of OH…N, OH…O, and hydrophobic association were -12.2 kcal/mol, -13.1 kcal/mol, and -11.4 kcal/mol, respectively, indicating that hydrogen bonding was stronger than hydrophobic association. The interactions between HA and CTC could improve their removal efficiency in the coagulation process. This is due to that the functional groups (COOH and OH) in the HA@CTC could be adsorbed by Al based hydrolysates. Polar interaction dominated the CTC and HA removal, and PAC was more efficient than PDMDAAC to remove HA@CTC complexes due to its higher complexing capacity. Thanks to the low concentration of residual contaminants and the formation of large and loose flocs, the interaction of HA and CTC could alleviate membrane fouling during ultrafiltration process. This study will provide new insight into the efficient removal of combined pollution and membrane fouling control.

Sono-enhanced heterogeneous Fenton catalysis: magnetic halloysite nanotube synthesis and accelerated free radical generation

Although heterogeneous Fenton catalysis has captured increasing attention compared to its homogeneous counterpart, it still confronts some inherent drawbacks in use, such as the dilemma in solid-liquid separation and greater mass transfer resistance. Driven by the acoustic cavitation effect, herein, a sono-enhanced heterogeneous Fenton catalysis process was built to overcome the above two shortcomings, by rapidly synthesizing magnetic Fenton-like catalysts and accelerating electron transfer during the catalytic reaction. The results show that, compared to the traditional chemical coprecipitation method, Fe3O4 with smaller particle size and better crystallinity grew on the surface of halloysite nanotubes (HNTs) by using the sonochemical strategy, leading to displaying the higher catalytic activity toward the degradation of methylene blue (MB, improved by ~2.5 times). In parallel, more •OH and •O2- were produced after the ultrasound was further introduced to the routine Fenton-like catalysis system, thus highly accelerating the removal of MB (improved by ~50%). Besides, benefiting from the robust chemical integration of Fe3O4 and HNTs, Fe3O4@HNTs-S had a lower iron ion leaching in use, showing superior catalytic stability. The speed, simplicity, and generality, together with the enhanced mass transfer rate, make the use of ultrasound an enabling methodology to improve the heterogeneous Fenton catalysis.

The suitability and mechanism of polyaluminum-titanium chloride composite coagulant (PATC) for polystyrene microplastic removal: Structural characterization and theoretical calculation

Microplastics (MPs) particles bring potential threats to the aqueous environment, and the coexistence of natural organic matter (NOM) enhances their toxicity. Coagulation is an efficient method for particle removal and exploring the binding sites and modes of the coagulant hydrolysates with MPs in the presence of NOM is essential to understand the coagulation mechanism. In this study, a novel polymerized polyaluminum-titanium chloride composite coagulant (PATC) was prepared and used to remove polystyrene (PS). It was found that PATC could compress or even destroy the surface layer of the negatively charged PS. In comparison to PAC and PTC, PATC was more efficient in decreasing the energy barrier of the PS particles and increasing their aggregation rate over a wider pH range. The results of the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) calculation revealed that the interaction between the hydrolysates of PATC and PS was mainly polar interaction (V_AB), such as hydrogen bonding. The peak intensity and peak shift in Fourier-transformed infrared (FTIR) and X-ray photoelectron spectra (XPS) were analyzed to further explore the interaction between the hydrolysates of PATC and PS. It was found that hydrogen bonding existed between the -OH group of PATC and the aliphatic C-H and C=O groups of PS. And the main interaction between HA and PS was the π-π* conjugation and hydrogen bonding between the -COOH, -OH, and C=O groups of HA and the C=O and aliphatic C-H groups of PS. Therefore, in the HA@PS system, the active sites of HA (e.g. -COOH and -OH) and PS (e.g., C=O and aliphatic C-H) binding with the coagulants were occupied, which accordingly led to the dramatic decline in the removal efficiency of both HA and PS. In actual lake water treatment, although the removal efficiency of PS was significantly poor, PATC performed better for PS removal than PAC and PTC. Besides, the effluent pH was maintained at 6.81±0.08, which met the requirements of the subsequent water treatment process. This study provides systematic knowledge for understanding the interaction between PS, NOM, and coagulant hydrolysates, and further confirms the application potential of PATC for MPs removal.

Super-amphiphilic graphene promotes peroxymonosulfate-based emulsion catalysis for efficient oil purification

Oil fractions containing highly toxic and hazardous organic contaminants can not only cause severe environmental disasters, but also an undesired waste of resources. Given the exceptional performance of persulfates in the removal of persistent and refractory organic pollutants from aqueous media, herein, a peroxymonosulfate-based Pickering emulsion catalytic (PPEC) system was constructed for the hazardous oil purification, using super-amphiphilic graphene as a solid emulsifier and a heterogeneous catalyst simultaneously. Combined detailed instrumental analysis with theoretical calculations, we find that the incorporation of pyridinic N and its oxide significantly facilitated the formation of super-amphiphilic graphene and successfully induced the formation of Pickering emulsion. In addition to stabilizing the PPEC system, super-amphiphilic graphene can also achieve efficient removal of Sudan III (simulated lipophilic organic pollutant) by activating peroxymonosulfate (PMS) to generate •O₂^- and ¹O₂. Results showed that 80 mg/L Sudan III (20 mL) could be fully degraded within 30 min using 10 mL 5 mmol PMS. More significantly, our proposed PPEC system also exhibited excellent property in the purification of practical waste engine oil. This study provides new insights into the purification and recovery of waste oil.

One-step synthesis of Enteromorpha graphene aerogel modified by hydrophilic polyethylene glycol achieving high evaporation efficiency and pollutant tolerance

Photothermal evaporation using solar energy is a sustainable way to produce fresh water from seawater. Aiming to explore functional materials as a solar-energized evaporator with enhanced evaporation rate and pollutant tolerance, this study was to synthesize a self-floating composite graphene aerogel (GA) doped with Enteromorpha and modified polyethylene glycol (PEG), named as PEGA using solar energy for desalination. Physio-chemical properties and evaporative mechanism of PEGA were experimentally investigated and analyzed with respect to molecular weight, PEG dosage, and ratio of Enteromorpha and graphene oxide. Experimental data revealed that the modification of PEG improved hydrophilic functional ability of PEGA, resulting in increasing the evaporation rate and photothermal conversion efficiency up to 2.55 kg/(m²·h) and 105.71 %, respectively. The ion removal rate of seawater exceeds 99.99 % via the PEGA conducted solar evaporation. Furthermore, PEGA possessed an excellent property of salinity emulsion pollution tolerance. Particularly, the evaporation rate of the PEG-modified biomass-based aerogel was 2.84 kg/(m²·h) in a 15 wt% NaCl solution (1 sun, 6 h) and 2.50 kg/(m²·h) at 1 h. The formation of hydrogen bonds between -OH of PEG and water molecules assist to conduct water along the graphene matrix to improve water evaporation. The cost of the graphene aerogel modified by Enteromorpha was reduced by 38.88 % less than the original graphene aerogel. The results from this study will greatly promote the application of graphene aerogel for desalination via solar evaporation.

Modeling the charge collection efficiency in the Li-diffused inactive layer of P-type high purity germanium detector

A model of the Li-diffused inactive layer in P-type high purity germanium detectors is built to describe the transportation of charge carriers and calculate the charge collection efficiency therein. The model is applied to calculate charge collection efficiency of a P-type point-contact germanium detector used in rare event physics experiments and validated in another P-type semi-planar germanium detector. The calculated charge collection efficiency curves are well consistent with measurements for both detectors. Effects of the Li doping processes on the charge collection efficiency are discussed based on the model. This model can be easily extended to other P-type germanium detectors, for instance, the P-type broad-energy Ge detector, and the P-type inverted-coaxial point-contact detector.

Revealing the Generation of High-Valent Cobalt Species and Chlorine Dioxide in the Co3O4-Activated Chlorite Process: Insight into the Proton Enhancement Effect

A Co₃O₄-activated chlorite (Co₃O₄/chlorite) process was developed to enable the simultaneous generation of high-valent cobalt species [Co(IV)] and ClO₂ for efficient oxidation of organic contaminants. The formation of Co(IV) in the Co₃O₄/chlorite process was demonstrated through phenylmethyl sulfoxide (PMSO) probe and ¹⁸O-isotope-labeling tests. Both experiments and theoretical calculations revealed that chlorite activation involved oxygen atom transfer (OAT) during Co(IV) formation and proton-coupled electron transfer (PCET) in the Co(IV)-mediated ClO₂ generation. Protons not only promoted the generation of Co(IV) and ClO₂ by lowering the energy barrier but also strengthened the resistance of the Co₃O₄/chlorite process to coexisting anions, which we termed a proton enhancement effect. Although both Co(IV) and ClO₂ exhibited direct oxidation of contaminants, their contributions varied with pH changes. When pH increased from 3 to 5, the deprotonation of contaminants facilitated the electrophilic attack of ClO₂, while as pH increased from 5 to 8, Co(IV) gradually became the main contributor to contaminant degradation owing to its higher stability than ClO₂. Moreover, ClO₂^- was transformed into nontoxic Cl^- rather than ClO₃^- after the reaction, thus greatly reducing possible environmental risks. This work described a Co(IV)-involved chlorite activation process for efficient removal of organic contaminants, and a proton enhancement mechanism was revealed.

Pilot-scale advanced treatment of actual high-salt textile wastewater by a UV/O3 pressurization process: Evaluation of removal kinetics and reverse osmosis desalination process

Advanced oxidation processes (AOPs) such as ozonation and Fenton processes are widely used in the treatment of high-salt wastewater. The UV/O₃ pressurization process was designed and applied at the pilot-scale for treatment of actual high-salt textile wastewater. The UV/O₃ pressurization process achieved the highest decolorization (85 %) and chemical oxygen demand (COD_Cr, 43.2 %) removal efficiency at an O₃ dosage of 200 g·t^-1 and a pressure of 0.2 MPa. Compared to ordinary ozonation, the UV/O₃ pressurization process improved the solubility and gas-liquid mass transfer efficiency of O₃ in wastewater and generated a large number of O₃ microbubbles. Hydroxyl radical (·OH), superoxide radicals (O₂·^-) and single oxygen (¹O₂) all played a significant role on the removal of pollutants in wastewater during the UV/O₃ pressurization process. The reverse osmosis (RO) process was used to evaluate the effect of UV/O₃ pressurization and Fenton pre-oxidation processes on the desalination process as the last process in treating high-salt organic wastewater. The pre-oxidation processes improved the initial RO water flux. Compared with the Fenton process, the UV/O₃ pressurization process had less membrane fouling (thin fouling layer vs thick fouling layer), and final water flux (59.4 LMH) was higher than that of Fenton process (34.9 LHM). The total dissolved solids (TDS), Cl^- and SO₄^2- of the effluent from UV/O₃ pressurization process (37.2, 7.6 and 3.0 mg·L^-1) were better than that of Fenton process (65.7, 13.9 and 7.1 mg·L^-1). Therefore, the UV/O₃ pressurization process without secondary pollution is more suitable for the advanced treatment of high-salt organic wastewater than the Fenton process.

Versatile crosslinking synthesis of an EDTA-modified UiO-66-NH2/cotton fabric composite for simultaneous capture of heavy metals and dyes and efficient degradation of organophosphate

The metal-organic frameworks/cotton fabric composites (MOFs/CFCs) have emerged as a new type of prospective materials for environmental cleanup, due to their convenient recyclability and high removal efficiency towards hazardous pollutants. However, their practical applications are limited by complicated synthetic conditions, insufficient interface bonding and poor adsorption capacity. Herein, for the first time, a robust ethylenediaminetetraacetic acid (EDTA)-functionalized MOFs/CFC is prepared based on UiO-66-NH₂ crystals by using EDTA dianhydride as the cross-linking agent, and applied for simultaneous removal of heavy metals and dyes, as well as degradation of chemical warfare agents. The as-prepared EDTA-UiO-66-NH₂/CFC shows extraordinary monocomponent adsorption performance with maximum adsorption capacity of 158.7, 126.2, 131.5, 117.4 and 104.5 mg/g for Cd(II), Cu(II), methylene blue, crystal violet and safranin O, respectively. Interestingly, in metal-dyes binary system, the uptake of Cu(II) by EDTA-UiO-66-NH₂/CFC increases significantly when co-existing high concentration of dyes. The results indicate that the synergistic and simultaneous removal of both dyes and metal from complex systems can be realized by EDTA-UiO-66-NH₂/CFC via multiple mechanisms. The EDTA-UiO-66-NH₂/CFC also exhibits an outstanding catalytic performance for degrading dimethyl 4-nitrophenylphosphate. Besides, it can be reused for several times without obvious decrease of its adsorption and catalysis efficiencies. More impressively, the cross-linking reaction approach can not only anchor UiO-66-NH₂ crystals firmly onto cotton fabric, but also facilitate in-situ formation of abundant adsorption sties on the adsorbent surface. Therefore, this work offers a simple and versatile synthetic strategy to develop high-performance environmental material for multiple pollutants remediation.

Two cases of fetal inguinoscrotal hernia and review of the literature

Fetal inguinal hernia is quite rare and here we report two cases of prenatally diagnosed inguinoscrotal hernia to add to the limited understanding of this rare condition. The disappearance of blood flow signal in the scrotum may be helpful in detecting fetal incarcerated inguinoscrotal hernia that may progress to strangulation. If bowel dilatation was observed in such cases, the physician should be alert to identify primary intestinal obstruction caused by congenital digestive tract malformation and secondary intestinal obstruction caused by incarceration.

Constraints on Sub-GeV Dark Matter-Electron Scattering from the CDEX-10 Experiment

We present improved germanium-based constraints on sub-GeV dark matter via dark matter-electron (χ-e) scattering using the 205.4  kg·day dataset from the CDEX-10 experiment. Using a novel calculation technique, we attain predicted χ-e scattering spectra observable in high-purity germanium detectors. In the heavy mediator scenario, our results achieve 3 orders of magnitude of improvement for m_{χ} larger than 80  MeV/c^{2} compared to previous germanium-based χ-e results. We also present the most stringent χ-e cross-section limit to date among experiments using solid-state detectors for m_{χ} larger than 90  MeV/c^{2} with heavy mediators and m_{χ} larger than 100  MeV/c^{2} with electric dipole coupling. The result proves the feasibility and demonstrates the vast potential of a new χ-e detection method with high-purity germanium detectors in ultralow radioactive background.

Exotic Dark Matter Search with the CDEX-10 Experiment at China's Jinping Underground Laboratory

A search for exotic dark matter (DM) in the sub-GeV mass range has been conducted using 205 kg day data taken from a p-type point contact germanium detector of the CDEX-10 experiment at China's Jinping underground laboratory. New low-mass dark matter searching channels, neutral current fermionic DM absorption (χ+A→ν+A) and DM-nucleus 3→2 scattering (χ+χ+A→ϕ+A), have been analyzed with an energy threshold of 160 eVee. No significant signal was found; thus new limits on the DM-nucleon interaction cross section are set for both models at the sub-GeV DM mass region. A cross section limit for the fermionic DM absorption is set to be 2.5×10^{-46}  cm^{2} (90% C.L.) at DM mass of 10  MeV/c^{2}. For the DM-nucleus 3→2 scattering scenario, limits are extended to DM mass of 5 and 14  MeV/c^{2} for the massless dark photon and bound DM final state, respectively.

Fabrication of superhydrophobic Enteromorpha-derived carbon aerogels via NH4H2PO4 modification for multi-behavioral oil/water separation

Hydrophobic and oleophilic biomass-based block materials are considered to be highly promising candidates used for oil/water separation. However, the crucial hydrophobic modification process often involves various toxic and hazardous organic substances or requires high energy inputs. Inspired by the flame retardant principle of phosphorus-containing flame retardants, herein, an Enteromorpha-derived carbon (ADP-EP) aerogel with a water contact angle of 144.2° was prepared by successive freeze-shaping, freeze-drying and low-temperature carbonization treatment (300 °C), using NH₄H₂PO₄ (ADP) as a modifier. The results demonstrated that the introduction of NH₄H₂PO₄ could largely facilitate the removal of oxygenated groups from the pristine EP aerogels and enhance their surface roughness, thereby achieving surface hydrophobic modification. Featuring intrinsic low density, rich porosity and strong lipophilicity, the as-fabricated ADP-EP aerogels exhibited exceptional performance in both oil spill adsorption (~140 g/g) and water-in-oil emulsion separation. Moreover, the good reusability for oil uptake was also realized thanks to its robust mechanical compressibility and thermal stability. This work provides a facile, economical and eco-friendly route to obtain a desirable hydrophobic/oleophilic surface.

Unveiling the Origins of Selective Oxidation in Single-Atom Catalysis via Co-N4-C Intensified Radical and Nonradical Pathways

Single-atom catalysts (SACs)-based peroxymonosulfate (PMS) systems are highly selective to the type of organic pollutants while the mechanisms remain ambiguous. In this work, we carried out experimental and theoretical investigations to reveal the origins of selectivity of radical and nonradical pathways in a designated Co-N₄-C/PMS system. Two typical pollutants [bisphenol A (BPA) and metronidazole (MNZ)] with different molecular structures were employed for comparison. We found that radical oxidation (SO₄^•- and HO^•) and nonradical electron-transfer pathway (ETP) co-existed in the Co-N₄-C/PMS system. Pollutants (e.g., MNZ) with a high redox potential were degraded primarily by free radicals rather than ETP, while the oxidization of low-redox pollutants (e.g., BPA) was dominated by ETP at the surface region of Co-N₄-C which overwhelmed the contributions of radicals in the homogeneous phase. Intriguingly, the contributions of radical and nonradical pathways could be manipulated by the PMS loading, which simultaneously increased the radical population and elevated the oxidation potential of Co-N₄-C-PMS* complexes in ETP. Findings from this work will unravel the mysterious selective behavior of the SACs/PMS systems in the oxidation of different micropollutants.

Selective capture of Pd(II) from aqueous media by ion-imprinted dendritic mesoporous silica nanoparticles and re-utilization of the spent adsorbent for Suzuki reaction in water

The development of highly efficient adsorptive material for the selective capture of Pd(II), and re-utilization of spent Pd(II)-loaded adsorbent as an efficient catalyst for organic synthesis are of great significance, but challenging. Particularly, the heterogeneous palladium-catalyzed Suzuki reaction in aqueous media is much more challenging than that of homogeneous. Herein, several novel Pd(II) ion-imprinted polymers (PIIPs) based on dendritic fibrous silica particles are constructed by surface ion imprinting technology (SIIT), using Schiff base and pyridine groups functionalized organosilicon as functional monomer. The PIIP-3 prepared by 3 g of functional monomer exhibits the best adsorption performance, and shows ultrafast (10 min) and selective capture of Pd(II) with high uptake capacity (382.5 mg/g). Moreover, the waste Pd(II) loaded PIIP-3 (PIIP-3-Pd) can serve as a catalyst towards the Suzuki reaction in water, affording 94.2 % yield of the desired product. Interestingly, the PIIP-3-Pd can be reused 12 times without an appreciable decrease in catalytic activity, which is probably due to the imprinted cavity and specific recognition site of PIIP-3 can match and recapture Pd active species in a complex catalytic environment. Thus, this work demonstrates huge potentials of SIIT to enhance the selectivity of adsorption process and increase the lifetime of catalysts.

Phytic acid and graphene oxide functionalized sponge with special-wettability and electronegativity for oil-in-water emulsion separation in single-step

Developing an emulsion separation material with one-step in-situ purifying capability and improved security in applications, especially for subsequent scale-up, is valuable but remains a challenge. Herein, the amphiphilic sponge (PA@RGO@MS) was prepared via impregnation and in-situ growth of the negatively charged hydrophilic phytic acid (PA) and the hydrophobic reduced graphene oxide (RGO) on the surface of the melamine sponge (MS) and applied in emulsion purification. The mechanics, wettability, absorption performance of the PA@RGO@MS were analyzed to identify its potential for stable demulsification. Results show that the PA@RGO@MS could purify emulsions (turbidity removal rate = 99.7%; TOC removal rate = 94.14%) in-situ in one step by simple shock absorption, profited from the hydrophilic and demulsification capability of PA, oil absorption of RGO, and wide reaction and storage space of MS. Targeting the emulsion with distinct properties (density, viscosity, and concentration) of the oil phase, the PA@RGO@MS could efficiently enable the purification. Meanwhile, the powerful flame-retardant granted from PA ensures the safe shipment and storage of sponges. The favorable cyclability (turbidity removal rate > 98.5% and TOC removal rate > 89.5% after 10 cycles) and diversified operating modes enhance the practical value of the PA@RGO@MS.

Highly efficient Al-Ti gel as a coagulant for surface water treatment: Insights into the hydrolysate transformation and coagulation mechanism

In view of the insufficient coagulation efficiency of traditional inorganic coagulants, a series of Al-Ti gels with different Ti/triethanolamine (TEA), Ti/H₂O, and Ti/Al molar ratios were prepared by sol-gel process in this study. Fourier transform infrared (FTIR) spectra of the Al-Ti gels preliminarily confirmed the interaction between Al and Ti by detecting the appearance of the Al-O-Ti bond. The peak shift of the chemical bonds in X-ray photoelectron spectra (XPS) and the transformation of the hydrolysate species in the Al-Ti gels were analyzed to further explore the interaction mechanism between Al and Ti. It was found that moderate TEA could inhibit the hydrolysis of Ti precursors by taking up the coordination sites of H₂O to form a CO-Ti bond. Density functional theory (DFT) calculation results showed that Ti could be incorporated into the framework of aluminum hydrolysates to form an Al-O-Ti bond, and [Al₂Ti₂(OH)_x(TEA)_y(H₂O)_8-x-y]^14-x was the most possible copolymerization hydrolysate. Based on the above research results, the most efficient Al-Ti gel was selected and applied to the actual lake water treatment. The highest UV₂₅₄ removal efficiency with the addition of Al-Ti gel was > 60%, nearly 25% higher than that of Ti gel. The hydrolysates of Al-Ti gel, such as TiO(OH)_2(am), Al(OH)_3(am), and [Al₂Ti₂(OH)_x(TEA)_y(H₂O)_8-x-y]^14-x, could remove organic matters through the incorporation of charge neutralization, adsorption, complexation, and sweeping effects. These results provide a new idea for studying the interaction mechanism between Al and Ti in composite coagulants, and have theoretical guiding significance to actual water treatment.

Visible-Light Photocatalytic Chlorite Activation Mediated by Oxygen Vacancy Abundant Nd-Doped BiVO4 for Efficient Chlorine Dioxide Generation and Pollutant Degradation

Visible-light photocatalytic chlorite activation has emerged as an efficient oxidation process for micropollutant elimination. However, the in-depth mechanism of chlorite activation is not understood. In this study, using neodymium-doped bismuth vanadate (Nd_xBi_1-xVO_4-δ) as a model catalyst, we describe the oxygen vacancy (OV)-mediated chlorite activation process for efficient ClO₂ generation and cephalexin (CPX) degradation. DFT calculations and in situ DRIFTS suggest that the OV-introduced surface -OH serves as the Brønsted acidic center for chlorite adsorption. The OV-mediated chlorite activation involves multistep reactions that surface hydroxylation and proton transfer from the surface -OH to chlorite, forming metastable chlorous acid (HClO₂) and further disproportionating to ClO₂. As compared with vis-photocatalysis, the vis-photocatalysis coupled with chlorite activation (vis/chlorite) technique exhibits superior performance in antibiotic degradation and achieves efficient microorganism inactivation. This work uncovers the role of OVs on chlorite activation and provides a rational strategy for designing visible-light-driven oxidation techniques in water and wastewater treatment.

Coagulation behavior of polyaluminum-titanium chloride composite coagulant with humic acid: A mechanism analysis

The hydrolysate species of metal-based coagulants and the binding sites of humic acid (HA) are highly dependent on the pH conditions. Exploring the binding sites and modes between coagulant hydrolysates and HA molecules is critical to understanding the coagulation mechanism. In this paper, the binding behavior between HA molecules and the hydrolysates of a polyaluminum-titanium chloride composite coagulant (PATC) was investigated under different pH conditions by semi-quantitative FTIR and XPS. It was found that oligomeric and mesopolymeric hydrolysates were the dominant species under acid conditions, which could complex with the hydroxyl and carboxyl groups of HA by forming COAl/Ti coordinate bonds. However, large amounts of H⁺ could compete with Al³⁺ and weaken the removal efficiency of HA. With the increase of pH, the hydrolysis process of the PATC and the deprotonation of HA were simultaneously underway. Under weakly acid conditions, the complexation of the aluminum hydrolysates with carboxyl groups was improved due to the gradually diminishing competition of H⁺ and the enhanced charge neutralization of the further polymerized hydrolysates. Consequently, the maximum UV₂₅₄ removal by adding PATC was observed at pH 6. Under alkaline conditions, the sweeping effect of amorphous hydroxide dominated the HA removals, which was accompanied by the surface complexation of Al/Ti nuclear with carboxyl groups as well as the hydrogen bonds between hydroxyl and hydroxide. This study provides a new clue for the interaction mechanisms between the hydrolysates of composite coagulants and the dominant functional groups of HA at various pH conditions.

Enhanced removal of phosphate using pomegranate peel-modified nickel‑lanthanum hydroxide

In this work, a bimetallic Ni/La nanoparticle-laded biosorbent was fabricated from pomegranate fibers by solvothermal synthesis method. The material exhibited a high-efficient phosphate removal capability. The results of the characterization analysis showed that the surface of pomegranate fibers was rough and evenly coated with Ni and La after modification, and the specific surface area of Ni-La@Peel increased to 50.20 m²/g, providing a large number of adsorption sites for phosphate removal. The maximum phosphate removal rate of adsorbent was higher than 97% in a wide pH range (3.7-10.8). The maximum adsorption capacities of Ni-La@Peel were 226.55 mg-P/g and 220.31 mg-P/g under alkaline and acidic conditions, respectively, as calculated using the Langmuir model. Meanwhile, all the results were consistent with the Langmuir isothermal (R² = 0.99) and kinetic pseudo-second order models (R² = 0.99), indicating that the phosphate removal mechanism of Ni-La@Peel was mainly related to homogeneous chemisorption. Experimental results showed that in the presence of other anions, such as chloride, sulfate, nitrate, bromide and fluoride, the adsorption capacity of phosphate was only reduced by about 10% compared to the blank sample individually. In addition, the phosphate removal efficiency of Ni-La@Peel remained 82.05% at 7th adsorption-desorption cycle. These findings show that Ni-La@Peel is a promising material for purification of phosphate-containing wastewater.

Synthesis of rice husk-based ion-imprinted polymer for selective capturing Cu(II) from aqueous solution and re-use of its waste material in Glaser coupling reaction

With the deepening of the concept of recycling economy and green chemistry, selective capture of Cu(II) from wastewater by biosorbent and reuse of the spent Cu(II)-loaded adsorbent are of great significance. Herein, we synthesized composite of rice husk (RH) with mesoporous silica MCM-41 (RH@MCM-41) modified by organosilane containing amino and schiff groups as functional monomer and cross-linking agent. The silica modified RH@MCM-41 was employed as supporter to fabricate copper ion-imprinted polymers as absorbents (named as RM-CIIPs) via surface ion imprinting technique. Adsorption isotherms, kinetics, selectivity and mechanism of RM-CIIPs to remove Cu(II) were investigated with respect to different adsorption condition. Furthermore, we explored the catalytic activity of spent Cu(II)-loaded adsorbent in Glaser coupling reaction. Batch adsorption studies revealed that RM-CIIP-3 prepared with functional monomer shows the best adsorption capacity (91.4 mg/g) for Cu(II), and adsorption equilibrium could be reached within 30 min. RM-CIIP-3 exhibited an excellent selectivity for capturing Cu(II) and reusability in six adsorption/desorption cycles. More importantly, the spent Cu(II)-loaded adsorbent could be used as bio-heterogeneous catalyst and afford the desired product (1,4-diphenylbutadiyne) in 99.1% yield. Our research indicates an eco-friendly systematic strategy to utilize the waste material as an adsorbent for removing heavy metals and catalyst for industry.

Catalytic ozonation performance and mechanism of Mn-CeOx@γ-Al2O3/O3 in the treatment of sulfate-containing hypersaline antibiotic wastewater

Herein, we attempted to apply an alumina-based bimetallic (Mn-Ce) catalyst as an O₃ activator and explored the feasibility of the treatment of hypersaline organic wastewater. Compared with independent O₃ (35.00 ± 4.20%), mineralization of ciprofloxacin (CIP) under the Mn-CeO_x@γ-Al₂O₃/O₃ (MCAO) process was elevated to 76.04 ± 2.30%. The synergetic corporation among multivalence redox pairs of Mn (III)/Mn (IV), Ce (III)/Ce (IV) promoted the protonation of the surface hydroxyl group (S-OH₂⁺), and subsequently the dominant reactive oxygen species in the MCAO process, OH and O₂^-, were generated rapidly. However, the mineralization of CIP decreased in MCAO/SO₄^2- system due to the formation of SO₄^-, which reacted with CIP more slowly (8.4 × 10⁸ M^-1 s^-1) than OH (4.1 × 10⁹ M^-1 s^-1). In MCAO/SO₄^2-/Cl^- mixture saline conditions, mineralization of CIP was improved at low Cl^- concentration (0.5 wt%) due to the generation of Cl, while inhibited with excessive Cl^- (≥1.5 wt%) owing to the formation of residual chlorides (Cl₂, Cl₂^- and ClO^-). Meanwhile, the MCAO process possessed promising capability to remediate hypersaline wastewater containing dyes, phenol and pesticides, as well as actual salinity-rich wastewater. Based on the above, the present study would provide new insights into hypersaline organic wastewater treatment by the MCAO process.

Low-temperature carbonization synthesis of carbon-based super-hydrophobic foam for efficient multi-state oil/water separation

In view of the complexity and diversity of multi-state oils, the development of green and low-cost materials with high selectivity to oils has important ecological significance in the polluted water treatment. Herein, a simple method was proposed to develop large-scale production of superhydrophobic sponges (CPMF200 sponges) for high-efficiency oil/water separation under different complex environments. The as-prepared CPMF200 sponges possessed many superior properties, including high roughness, well-developed porosity, good thermal stability, excellent chemical stability, and superhydrophobic properties (water contact angle is 152°), which is conducive to high oil adsorption capacity (up to 70-179 times of its own weight) and oil-water separation. More importantly, the CPMF400 sponge has an excellent photothermal conversion capability to improve the fluidity of high viscosity oil for oil recovery. Based on a simple synthesis method, it exhibits high-efficiency absorption of multi-state oils and excellent oil-water separation performance and strongly proves their application prospects in treating oily wastewater.

Insights into selective adsorption mechanism of copper and zinc ions onto biogas residue-based adsorbent: Theoretical calculation and electronegativity difference

Modified biomass-based adsorption technique has attracted much attention in heavy metal ions removal, but selective adsorption behavior and mechanism of heavy metal ions adsorption onto biosorbent still need to be further clarified. Herein, a carboxylated biogas residue (BR-COOH) was prepared to remove the Cu²⁺ and Zn²⁺ from single/binary heavy metal ions solution and explore selective adsorption mechanism. The results exhibited that the adsorption capacities of BR-COOH for Cu²⁺ was higher than that for Zn²⁺ obviously, whether in the single or binary heavy metal ions solution. Meanwhile, the introduced carboxy groups were identified as the main sites for metal ions adsorption. Density functional theory (DFT) calculation results exhibited that the adsorption energy of Cu²⁺ (-0.51 eV) onto BR-COOH was lower than that of Zn²⁺ (-0.47 eV), indicating that the Cu²⁺ adsorbed on BR-COOH was more stable than Zn²⁺. Moreover, the metal ions adsorption capacity of BR-COOH was positively correlated with their electronegativity, which was due to that the metal ions with stronger electronegativity was more easily interacted with the negatively charged oxygen in carboxyl groups. The same results were also verified in the control experiment conducted with two other biosorbents. Therefore, the work provided a new and in-depth insight into selective adsorption of metal ions onto carboxylated biosorbent.

Removal of chloramphenicol by sulfide-modified nanoscale zero-valent iron activated persulfate: Performance, salt resistance, and reaction mechanisms

Herein, sulfide-modified nanoscale zero-valent iron (S-nZVI) was prepared by a liquid-phase reduction route and then applied to activate persulfate (PS) for the degradation of chloramphenicol (CAP). The effects of Fe/S molar ratio, catalyst dosage, PS concentration, initial pH, and co-existing ions (Cl^-, SO₄^2-, CO₃^2-) on the catalytic performance of S-nZVI/PS system were investigated. Simultaneously, the fluctuations of solution pH, oxidation-reduction potential, dissolved oxygen, and Fe²⁺ concentration were also monitored during the reaction. Results shown that 98.8 % of CAP could be removed under the optimum reaction conditions (S-nZVI dosage = 0.1 g/L, PS concentration = 3 mM, initial pH = 6.86). Compared to the pristine nZVI, the sulfidation behavior could critically improve the removal efficiency of CAP, ascribe to the enhancements of hydrophobicity of nZVI, production of hydroxyl radicals, and salt resistance. Furthermore, possible degradation pathways of CAP in S-nZVI/PS system were inferred based on liquid chromatography-mass spectrometry (LC-MS) and density functional theory (DFT) calculations. This study proves that the S-nZVI is a more promising catalyst for activating PS than nZVI, especially in the field of saline pharmaceutical wastewater treatment.

Synergistic adjustment of water channels and light absorption pathways to co-generate salt collection and clean water production

Solar-driven interface evaporation for clean water production has attracted significant concern due to its energy-saving and environmental protection. However, it is still challenging for the evaporator to continuously and efficiently produce clean water in practical applications because of salt particle deposits and insufficient water supply. Here, an improved and easy-to-manufacture solar evaporator device (Co-NCNT-GO system) enhances water supply and light absorption by introducing a water supply layer (melamine sponge) and bamboo-like structure carbon nanotubes embedded with metal cobalt particles (Co-NCNT). The salt accumulation on the edge of the Co-NCNT-GO film is achieved by controlling the concentration gradient of brine in the center area and the edge area of the film. This paper aims to study the photothermal mechanism of the Co-NCNT-GO system through a series of characterization and theoretical calculations (DFT) and discuss the influence of different water supply areas on the salt recovery capacity. The results show that Co-NCNT-GO significantly reduces the band (0.054 au) between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUNO) by graphite nitrogen-doped CNTs, which is beneficial to improve the light-to-heat conversion capability. Furthermore, the Co-NCNT-GO film has good water wettability due to the higher adsorption energy of pyridine nitrogen and water molecules in Co-NCNT (-9.33 kcal/mol). Simultaneously, it is found that the water evaporation capacity and water supply capacity significantly affect whether the salt can be continuously crystallized at the edge of the film. When the ratio of water supply area to light and heat area is 4:2.5, the salt recovery rate is 46.54 g m^-2 h^-1 during 108 h continuous desalination under one sun illumination. This rationally designed structure and adjustable water transport channel can simultaneously meet high-efficiency evaporation and salt recovery, which can have great potential in practical applications.

Coagulation-ultrafiltration integrated process for membrane fouling control: Influence of Al species and SUVA values of water

Natural organic matter (NOM) pollution is a great challenge for the ultrafiltration (UF) process owing to the inevitable membrane fouling. In this study, three Al species coagulants (Al_a/Al_b/Al_c) and their composites in combination with Poly dimethyl ammonium chloride (PolyDMDAAC) were used as a pretreatment strategy for the UF process. Then, test waters with different NOM fractions (i.e., humic acid, fulvic acid, protein, and polysaccharide) were prepared to analyze the effects of NOM characteristics on membrane fouling behaviors. The results indicated that compared with Al_b and Al_c, Al_a showed higher removal efficiencies for hydrophobic NOM, aromatic organic matters, and suspended particles, but a limited effect on removing dissolved organic carbon (DOC). Al_a or Al_a-PolyDMDAAC effectively mitigated membrane fouling by removing the hydrophobic NOM in the coagulation process and forming the porous cake layer in the UF process. The test waters with higher specific ultraviolet absorbance (SUVA) resulted in more severe total and reversible membrane fouling but lighter irreversible fouling. After pretreatment by Al_a or Al_a-PolyDMDAAC, water samples with the medium SUVA value exhibited remarkable alleviation of membrane fouling due to the formation of large, compact, and robust flocs, as well as the construction of loose and poriferous cake layer on the membrane surface. Although hydrophilic NOM was challenging to be removed by coagulation, the interception and re-adsorption of porous cake layers contributed to the alleviation of irreversible fouling.

A dual-functional layer modified GO@SiO2 membrane with excellent anti-fouling performance for continuous separation of oil-in-water emulsion

As the most significant target of membrane separation, the inadequacy of permeability and anti-fouling frequently constrain the application of the membrane in actual oily wastewater. Herein, a novel concept of membrane surface construction was proposed to mitigate this intractable problem, using SiO₂ as the support layer and graphene oxide (GO) as the isolation layer. The best co-localization proportion of the support layer (56 mg/L) and isolation layer (3.5 mg/L) was determined by the separation performance of the modified membranes for the simulated emulsion. The thin GO layer could effectively prevent contaminants from entering the membrane pores without affecting its roughness. Based on the synergistic action of the isolation layer and support layer, the GO@SiO₂ membrane could well implement emulsion purification with a stable permeability (654.11 LMHB) and high separation efficiency (99.41%). The superior anti-fouling performance of the membrane ensures its long-term cycling stability, with the permeability recovery rate of 89.75% (low-density oil) and 90.41% (high-density oil) after 10 repeated cycles. The storage stability also indirectly increases its value in practical applications. More importantly, the GO@SiO₂ membrane also shows great potential for industrial emulsion treatment with excellent purification and cycling stability (permeability recovery rate of 84.01%).

[Characteristics and the first CD4+T lymphocytes test of newly-reported HIV/AIDS cases aged 50 years and above in the third round of China comprehensive AIDS response program]

Objective: To understand the characteristics and the first CD4⁺T lymphocytes (CD4) test of newly-reported HIV/AIDS cases aged 50 years and above in the third round of China comprehensive AIDS response (CARES) program. Methods: The data of newly-reported HIV/AIDS cases aged 50 years and above from 2014 to 2018 were collected from the National Information system for HIV/AIDS Control and Prevention of Chinese System for Disease Control and Prevention. The Cochran-Armitage trend test and multivariate logistic regression were used for statistical analysis. Results: There were 8 288, 9 512, 11 315, 13 091, and 14 673 newly-reported cases of HIV/AIDS aged 50 years and above in the third round of China CARES in 2014, 2015, 2016, 2017, and 2018, respectively, for a total of 56 879 cases. The majority of cases were male (75.7%). The main route of transmission was heterosexual transmission (87.8%). Most of the cases were diagnosed by medical institutions (68.6%). 69.6% of HIV/AIDS cases completed the first CD4 test within 10 working days after the diagnosis of HIV infection. Among the 29 078 HIV/AIDS cases who had their first CD4 test immediately after diagnosis of HIV infection, the proportions of CD4 cell count <200 cells/μl and <500 cells/μl were 66.5% and 93.8%, respectively. The results of logistic regression analysis of the factors related to the first CD4 test immediately showed that, compared to cases with an education level of elementary school and below, OR (95%CI) values for timely CD4 testing of cases with an education level of junior high school, high school or technical secondary school and junior college or above were 1.113 (1.063-1.166), 1.205 (1.128-1.289) and 1.277 (1.160-1.406) respectively. Compared to cases aged 50-59 years, OR (95%CI) values for timely CD4 testing of cases aged 70-79 years and ≥80 years were 0.864 (0.816-0.914) and 0.612 (0.554-0.676), respectively. Compared to cases diagnosed by HIV voluntary counseling and testing, OR (95%CI) value for timely CD4 testing of cases diagnosed by medical institutions was 0.750 (0.714-0.788). Conclusions: The number of newly reported HIV/AIDS cases aged 50 and above was increasing year by year in the third round of China CARES, with a predominance of men and previous infections. The proportion of timely CD4 tests was drastically increasing. The factors associated with timely CD4 test included primary school or below education level, ≥70 years old, and cases diagnosed by medical institutions. The third round of China CARES should focus on strengthening the prevention of AIDS and early detection of HIV/AIDS cases among the elderly.

Preparation of a rice straw-based green separation layer for efficient and persistent oil-in-water emulsion separation

Inefficiency, high cost, and complex operation have emerged as shackles for large-scale separate oil-in-water emulsion. Herein, a low-cost and eco-friendly separation layer with a rough structure and rich anionic groups was fabricated from rice straw (RS) via a simple acid-base treatment and slight squeeze process. The separation layer's morphology, composition, and wettability were investigated. It was then employed to separate oil-in-water emulsion. The RS after acid and alkali treatment (A₁A₂-RS) exhibited a clear fiber structure and abundant humps, which made the separation layer superwettable and highly electronegative (-26.55 mV). The overlapped and intertwined A₁A₂-RS layer structure owned a superior performance for hexadecyl-trimethyl-ammonium-bromide (CTAB) adsorption and tiny oil interception. As a result, the separation layer had stable fluxes (>500 LMH) for multiple CTAB-stabilized emulsions and the obtained filtrates performed low total organic carbon (TOC) contents (<30 mg/L). In addition, the A₁A₂-RS layer had excellent renewability (10 cycles/ 200 mL) and the flux could be substantially recovered merely by aqueous wash. Moreover, filtrate analysis showed that the A₁A₂-RS layer had a good effect on actual emulsion treatment with a TOC removal rate of 89.56%.

The application of UV/O3 process on ciprofloxacin wastewater containing high salinity: Performance and its degradation mechanism

The increasing discharge of high-salinity organic wastewater has drawn much concern. This work investigated the degradation and mineralization of ciprofloxacin (CIP) in high-salinity wastewater by ozonation coupled with ultraviolet irradiation (UV). After coupling with UV, the removal efficiency of CIP was increased insignificantly (maximum 5.0%), while the dissolved organic carbon (DOC) removal in CIP wastewater (CW) was enhanced dramatically to 91.4% as compared with independent O₃ (37.5%). The reactive oxygen species (ROS) were identified as singlet oxygen (¹O₂) and superoxide anion radical (O₂^-•)·through electron paramagnetic resonance (EPR) and quenching experiments, among which ¹O₂ predominated in the UV/O₃ process. The existence of salt (Na₂SO₄ or NaCl) accelerated the mass transfer of O₃ at the gas-liquid interface, thus CIP removal was promoted in UV/O₃/SO₄^2- system. However, excessive Cl^- inhibited the removal efficiency of DOC in CW owing to its consumption of O₃. CIP degradation decreased as pH increased in non-salinity and UV/O₃/SO₄^2- system, which proved the direct reaction occurred between CIP and O₃. On the contrary, the O₃ mass transfer increased with increasing pH, hence the elimination of DOC in CW was promoted in UV/O₃/Cl^- system. Volatile organic compounds (VOCs) were detected from tail gas, but the toxicity estimation indicated the toxicity of products was similar or less than that of CIP. Overall, this work is meaningful for the practical application of UV/O₃ process in the high-salinity industry.

Recycling exhausted magnetic biochar with adsorbed Cu2+ as a cost-effective permonosulfate activator for norfloxacin degradation: Cu contribution and mechanism

Herein, we attempted to apply an exhausted magnetic biochar with adsorbed Cu²⁺ (Cu-Fe@BRC) directly as a PMS activator and explored the feasibility of this attempt. Density functional theory (DFT) and electrochemical analysis illuminated the adsorbed Cu²⁺ in Cu-Fe@BRC improved PMS activation and NOR degradation efficiency by elevating the adsorption capacity of PMS and performance of electron transfer. About 91.47% of norfloxacin (NOR) was rapidly degraded in Cu-Fe@BRC/PMS system with low Fe and Cu leaching. An in-depth mechanistic study was conducted with radical scavenging, radical capturing and solvent exchange, which demonstrated that the adsorbed Cu²⁺ could facilitate the formation of both different radicals and non-radical. Importantly, Cu-Fe@BRC can maintain a long-term stable operation and excellent catalytic performance in surface water treatment. The potential toxicity of by-product generated in the NOR degradation process was also predicated, and results suggested that most identified by-products were less toxic than NOR itself. Notably, the preparation cost of exhausted adsorbent-based catalysts could be negligible, so the expenditure of the corresponding oxidation process is reduced accordingly. Based on above, this work provides not only a low-cost exhausted biochar-based catalyst for water purification but also the insight into the PMS activation by adsorbed transition metal ions.

Fabrication of graphitic carbon nitride functionalized P-CoFe2O4 for the removal of tetracycline under visible light: Optimization, degradation pathways and mechanism evaluation

In this study, nano-sized CoFe₂O₄ composites were prepared through co-precipitation process. Then the phosphorus-doped strong magnetic graphitic carbon nitride hybrids composites (P-CoFe₂O₄@GCN) was stemmed from the CoFe₂O₄ composites via the thermal polymerization method. The TEM results show that the CoFe₂O₄ nanoparticles have been successfully embedded into the graphitic carbon nitride (GCN). The BET specific surface area of P-CoFe₂O₄@GCN-1 could reach 36.91 m²/g, which was 5.38 times higher than that of GCN. Thus, it provided sufficient reaction active sites to enhance the photocatalytic activity for tetracycline (TC) decomposition. The results from the photocatalytic experiments showed that the degradation efficiency of TC by P-CoFe₂O₄@GCN-1 could reach 96.2% within 60 min, which is 3.19 times higher than that of GCN. The h⁺, O₂•^- and •OH radicals detected by the electron spin resonance (ESR) were responsible for the TC decomposition in the photocatalytic reaction system. Persulfate (PS) can further activate the hybrid mixture system, and the fitting model predicted by the response surface methodology (RSM) indicated that the maximum tetracycline removal could reach 99.6% within 30 min. In addition, the degradation intermediates of TC were detected by HPLC-MS and the photodegradation mechanism was discussed.

Versatile 3D reduced graphene oxide/poly(amino-phosphonic acid) aerogel derived from waste acrylic fibers as an efficient adsorbent for water purification

The fabrication of multifunctional materials to remove soluble heavy metal ions and dyes, as well as insoluble oils from waste water is urgently required, yet remains a daunting challenge because of difficulty in controlling their structure and property to satisfy various demands. Herein, for the first time, novel 3D reduced graphene oxide/poly(amino-phosphonic acid) (PAPA) aerogels (rGO/PAPAs) with different PAPA content were developed by solvothermal reduction of the graphene oxide and cross-linking with PAPA chain, and subsequently employed as versatile adsorbent for the removal of complex pollutants such as Cr(III) ion, methylene blue (MB) dye and various kinds of organic solvents from water. Benefiting from the synergistic effect of the reduced graphene oxide (rGO) sheet and PAPA component, as well as its unique 3D structure, the resultant aerogel (rGO/PAPA-2) gained amphiphilic, ultralight, and multifunctional properties. Thus, it showed a fast adsorption rate (within 15 min) and high adsorption capacity (up to 327.1 mg/g) for Cr(III) ion at an optimal pH of 5.5 due to its unique 3D network structure with abundant amino-phosphonic acid functional groups. The uptake of Cr(III) by rGO/PAPA-2 was fitted well with the Langmuir isotherm and pseudo-second-order kinetic model. The adsorption mechanism of Cr(III) onto rGO/PAPA-2 can be attributed to electrostatic attraction and surface complexation with APA groups. In addition, the rGO/PAPA-2 displayed an excellent adsorption performance for MB (694.5 mg/g) and several organic solvents (83.2 to 254.3 g/g). Moreover, the rGO/PAPA-2 exhibited a good regeneration (around 99%) and satisfactory recovery abilities for the tested adsorbates. Notably, PAPA chains can be easily prepared from waste acrylic fibers, making it become a cost effective but versatile candidate to prepare new material. Therefore, this work provides a new design strategy to fabricate the rGO/PAPA-2 aerogel with great prospect for sophisticated industrial wastewater cleanup.

Impacts of composite flocculant in coagulation/ultrafiltration hybrid process for treatment of humic acid water: the role of basicity

The effects of the composite flocculant, polyaluminium chloride and poly dimethyldiallylammonium chloride (PACl-PDMDAAC) in comparison with PACl on coagulation efficiencies and membrane fouling in coagulation-ultrafiltration (C-UF) process were analysed, which was conducted in the conditions of different basicity (B) values and the presence of Mg²⁺. Results showed that PACl-PDMDAAC enhanced the ability of charge neutralization and absorption bridging, and improved the coagulation efficiency. When B value was 1.5, the flocculant hydrolyzed to form more Al_b morphology and effectively removed HA molecules. The presence of Mg²⁺ could improve the coagulation performance through bridging ability. The results of the ultrafiltration test showed that the flux reduction for PACl was 70%, while the flux reduction for PACl-PDMDAAC was 60% in C-UF process. PACl-PDMDAAC could effectively reduce membrane fouling mainly by reducing strongly attached cake/gel layer. When B value was 1.5, the Al_b content of the flocculant was higher and the ability of adsorption charge neutralization was strong, resulting in forming a stable cake layer. Therefore, the membrane fouling was the lightest. In addition, the presence of Mg²⁺ in raw water reduced the membrane fouling.

Application of sectionalized single-step reaction approach (SSRA) and distributed activation energy model (DAEM) on the pyrolysis kinetics model of upstream oily sludge: Construction procedure and data reproducibility comparison

As the dominant hazardous waste discharged from petroleum industry, the pyrolysis features of the upstream oily sludge (UOS) were scrutinized by way of TGA/DSC. The pyrolysis kinetics model of UOS was systematically constructed by sectionalized single-step reaction approach (SSRA) and distributed activation energy model (DAEM), and the data reproducibility was further evaluated. The results showed that when the pyrolysis operation temperature interval was set from 380 K to 1170 K, two weigh loss step, two endo/exothermic regions and three significant mass-loss peak were respectively emerged in TG, DSC and DTG curves, based on which the TG curves could be sectionalized into three stages. Attributing to the ∆E/E_α¯ value of each stage was higher than 10% but lower than 20% derived from the activation energy assessment, it is not only revealed three multi-step reactions were carried out in sequence with an individual dominant single-step reaction which was sufficient for the SSRA utilization, but also displayed a well fitted by the Gaussian distribution which satisfied the requirement of DAEM implementation. Based on the five-step construction procedure introduced in this paper, pyrolysis kinetics model of UOS could be successful established and interpret as SSRA-based and DAEM-based piecewise function. The latter exhibited a better performance on the data reproduction than the former because the nRSS value of the reproduced data derived from DAEM-based model was lower than 1.86%. The higher mathematical flexibility of DAEM-based model function was the major attribution to a better data reproducibility, also, it possessed a potential ability in predicting the reaction rate at an arbitrary reaction temperature once the heating ratio was preset.