Self-nanoemulsifying drug delivery system of sinapic acid: In vitro and in vivo evaluation

Formulation, characterization, and in vitro release of topical nanoemulsion containing prednisolone-derived corticosteroid

BACKGROUND

Prednisolone-derived corticosteroid (PDC) has anti-inflammatory activity in ocular administration. However, drug administration to the eye is extremely difficult due to the complex structure of the eye. Because of the ability of the eye to retain the drug and its physiology, the bioavailability of drugs applied to the eye is very low.

OBJECTIVE

One of the methods to overcome bioavailability problem is to formulate the drug as a nanoemulsion (NE). NEs are thermodynamically stable, colloidal drug delivery systems. They have small globule size and high surface area. These properties give them the ability to cross the biological membrane and increase the therapeutic efficacy of the drug molecule.

METHODOLOGY

The high energy method was used to create an NE eye drop formulation containing PDC, and the effects of changing homogenization processes on NE formation were investigated. After deciding on the optimum formulation; characterization, assay, and in vitro release studies were performed, and the stability of the formulation was followed for 12 months.

RESULTS

The optimum formulation selected initially had 126.6 ± 40.12 nm and 99.9 ± 1.2% PDC, it had 125.4 ± 41.20 nm and 99.29 ± 1.3% PDC after 12 months in 25 °C 40% RH conditions. Cytotoxicity studies have shown no significant cytotoxic effects in NE-containing PDC.

CONCLUSION

The preparation and optimization of topical NE formulations containing PDC for ocular inflammation treatment were achieved. The developed formulation was stable for 12 months and no toxic effect was found in cell culture studies. This formulation could be useful as an alternative to PDC for ocular applications.

Garala K, S S, Rahamathulla M, Ahmed MM, Farhana SA, Pasha I. Quality by design aided self-nano emulsifying drug delivery systems development for the oral delivery of Benidipine: Improvement of biopharmaceutical performance

The primary objective of the research effort is to establish efficient solid self-nanoemulsifying drug delivery systems (S-SNEDDS) for benidipine (BD) through the systematic application of a quality-by-design (QbD)-based paradigm. Utilizing Labrafil M 2125 CS, Kolliphor EL, and Transcutol P, the BD-S-SNEDDS were created. The central composite design was adopted to optimize numerous components. Zeta potential, drug concentration, resistance to dilution, pH, refractive index, viscosity, thermodynamic stability, and cloud point were further investigated in the most efficient formulation, BD14, which had a globule size of 156.20 ± 2.40 nm, PDI of 0.25, zeta potential of -17.36 ± 0.18 mV, self-emulsification time of 65.21 ± 1.95 s, % transmittance of 99.80 ± 0.70%, and drug release of 92.65 ± 1.70% at 15 min. S-SNEDDS were formulated using the adsorption process and investigated via Fourier transform infrared spectroscopy, Differential scanning calorimeter, Scanning electron microscopy, and powder X-ray diffraction. Optimized S-SNEDDS batch BD14 dramatically decreased blood pressure in rats in contrast to the pure drug and the commercial product, according to a pharmacodynamics investigation. Accelerated stability tests validated the product's stability. Therefore, the development of oral S-SNEDDS of BD may be advantageous for raising BD's water solubility and expanding their releasing capabilities, thereby boosting oral absorption.

Evaluation of the Physicochemical and Antimicrobial Properties of Nanoemulsion-Based Polyherbal Mouthwash

A nanoemulsion-based polyherbal mouthwash (PHFX) of Curcuma longa hydroalcoholic extract was developed and evaluated for its antibacterial effects against a variety of Gram-positive and Gram-negative oral pathogens in comparison to standard chlorhexidine acetate (CHD-A) (positive control). Various nanoemulsion-based mouthwashes of C. longa extract were produced using an aqueous phase titration approach via construction of pseudoternary phase diagrams. The developed nanoemulsion-based PHFX was studied for thermodynamic stability tests. Selected formulations (PHFX1-PHFX5) were characterized physicochemically for droplet diameter, polydispersity index (PDI), refractive index (RI), transmittance, and pH. The drug release studies were performed using the dialysis method. Based on the minimum droplet diameter (26.34 nm), least PDI (0.132), optimal RI (1.337), maximum %T (99.13), optimal pH (6.45), and maximum cumulative drug release (98.2%), formulation PHFX1 (containing 0.5% w/w of C. longa extract, 1.5% w/w of clove oil, 7.0% w/w of Tween-80, 7.0% w/w of Transcutol-HP, and 84.0% w/w of water) was selected for antimicrobial studies in comparison to standard CHD-A. The antibacterial effects and minimum inhibitory concentration were studied against various Gram-positive oral pathogens such as Streptococcus mutans, Staphylococcus aureus, Streptococcus pneumoniae, and Bacillus subtilis and Gram-negative oral pathogens such as Escherichia coli and Klebsiella pneumoniae. The antibacterial effects of PHFX1 were found to be significant over standard CHD-A against most Gram-positive and Gram-negative oral pathogens. The antimicrobial studies showed that the formulation PHFX1 was effective against all oral pathogens even at 3- to 4-fold lower working concentrations. These findings indicated the potential of nanoemulsion-based mouthwash in the treatment of a variety of oral pathogen infections.

Preparation and Characterization of Transethosome Formulation for the Enhanced Delivery of Sinapic Acid

Sinapic acid (SA) is a bioactive phenolic acid; its diverse properties are its anti-inflammatory, antioxidant, anticancer, and antibacterial activities. The bioactive compound SA is poorly soluble in water. Our goal was to formulate SA-transethosomes using thin-film hydration. The prepared formulations were examined for various parameters. In addition, the optimized formulation was evaluated for surface morphology, in-vitro penetration studies across the Strat M®, and its antioxidant activity. The optimized formulation (F5) exhibited 74.36% entrapment efficacy. The vesicle size, zeta potential, and polydispersity index were found to be 111.67 nm, -7.253 mV, and 0.240, respectively. The surface morphology showed smooth and spherical vesicles of SA-transethosomes. In addition, the prepared SA-transethosomes exhibited enhanced antioxidant activity. The SA-transethosomes demonstrated considerably greater penetration across the Strat M® membrane during the study. The flux of SA and SA-transethosomes through the Strat M® membrane was 1.03 ± 0.07 µg/cm2/h and 2.93 ± 0.16 µg/cm2/h. The enhancement ratio of SA-transethosomes was 2.86 ± 0.35 compared to the control. The SA-transethosomes are flexible nano-sized vesicles and are able to penetrate the entrapped drug in a higher concentration. Hence, it was concluded that SA-transethosome-based approaches have the potential to be useful for accentuating the penetrability of SA across the skin.

Diosmin-Loaded Nanoemulsion-Based Gel Formulation: Development, Optimization, Wound Healing and Anti-Inflammatory Studies

The wound-healing process is complex and prone to interruption or failure, which can result in the development of chronic wounds that never heal. This can be overcome by seeking prompt medical attention, which will reduce the likelihood of complications and speed up the healing of the cutaneous wound. It has been established that functionalized engineered biomaterials are a possible strategy for starting skin wound care. The purpose of the current study is to develop a diosmin (DSM)-loaded nanoemulsion (NE)-based gel formulation and to investigate its wound healing and anti-inflammatory activity on rats. The DSM-loaded NEs (F1-F17) were developed and optimized with the help of Box-Behnken Design Expert. The DSM-Nes were developed using lauroglycol 90 (LG90^®) as oil, Tween-80 as surfactant and transcutol-HP (THP) as co-surfactant. The optimized Nes showed globule size (41 ± 0.07 nm), polydispersity index (PDI) (0.073 ± 0.008) and percentage of entrapment efficiency (%EE) (87 ± 0.81%). This optimized DSM-loaded NEs (F1) was further evaluated and incorporated into 1% carbopol 940 gel. F1-loaded gel was then characterized for drug content, spreadability, in vitro release, wound healing, and anti-inflammatory studies. The developed gel of DSM was found to show significantly better (p < 0.05) wound-healing and anti-inflammatory activity.

Ternary Inclusion Complex of Sinapic Acid with Hydroxypropyl-β-cyclodextrin and Hydrophilic Polymer Prepared by Microwave Technology

Sinapic acid (SA) is a poorly water-soluble substance which could result in poor bioavailability. The aim of this study was to determine the “hydroxypropyl β-cyclodextrin (HPβCD)” solubilization of SA in the presence of the auxiliary substance hydroxypropyl methylcellulose (HPMC) and to evaluate the ternary inclusion complex prepared by microwave technology. Phase-solubility profiles showed that HPβCD exhibited the greatest solubilizing effect on SA in the presence of HPMC. The enhanced rate of SA dissolution was exhibited by a ternary complex. Outcomes of analyses such as “DSC, FTIR, NMR, and SEM” confirmed the embedding of SA into the cavity of the HPβCD and the formation of a ternary inclusion complex. The outcomes of antioxidant activity (ABTS and nitric oxide scavenging activity) demonstrated that SA ternary inclusion complex (TIC) presented strong antioxidant activity, which might be a result of the enhanced solubility of SA in the TIC prepared by microwave technology. Hence, SA-TIC formulation could be a better dosage form which may protect the body from free radical damage and oxidative stress. Microwave technology greatly boosted the interaction of SA with HPβCD and HPMC, and such findings are expected to contribute to raising the solubility of SA, thereby improving the bioavailability of SA.

Crisaborole Loaded Nanoemulsion Based Chitosan Gel: Formulation, Physicochemical Characterization and Wound Healing Studies

The development of an effective gel capable of treating eczema remains a challenge in medicine. Because of its greater retention in the affected area, good absorption of wound exudates, and induction of cell growth, nanogel is widely investigated as a topical preparation. Chitosan gel based on nanoemulsions has received much attention for its use in wound healing. In this study, four formulae (CRB-NE1-CRB-NE4) of crisaborole-loaded nanoemulsions (CRB-NEs) were developed using lauroglycol 90 as an oil, Tween-80 as a surfactant, and transcutol-HP (THP) as a co-surfactant. The prepared NEs (CRB-NE1-CRB-NE4) were evaluated for their physicochemical properties. Based on vesicle size (64.5 ± 5.3 nm), polydispersity index (PDI) (0.202 ± 0.06), zeta potential (ZP, −36.3 ± 4.16 mV), refractive index (RI, 1.332 ± 0.03), and percent transmittance (% T, 99.8 ± 0.12) was optimized and further incorporated into chitosan (2%, w/w) polymeric gels. The CRB-NE1-loaded chitosan gel was then evaluated for its drug content, spreadability, in-vitro release, flux, wound healing, and anti-inflammatory studies. The CRB-NE1-loaded chitosan gel exhibited a flux of 0.211 mg/cm²/h, a drug release of 74.45 ± 5.4% CRB released in 24 h with a Korsmeyer-Peppas mechanism release behavior. The CRB-NE1-loaded gel exhibited promising wound healing and anti-inflammatory activities.

Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Apremilast: In Vitro Evaluation and Pharmacokinetics Studies

Psoriatic arthritis is an autoimmune disease of the joints that can lead to persistent inflammation, irreversible joint damage and disability. The current treatments are of limited efficacy and inconvenient. Apremilast (APR) immediate release tablets Otezla® have 20-33% bioavailability compared to the APR absolute bioavailability of 73%. As a result, self-nanoemulsifying drug delivery systems (SNEDDS) of APR were formulated to enhance APR's solubility, dissolution, and oral bioavailability. The drug assay was carried out using a developed and validated HPLC method. Various thermodynamic tests were carried out on APR-SNEDDS. Stable SNEDDS were characterized then subjected to in vitro drug release studies via dialysis membrane. The optimum formulation was F9, which showed the maximum in vitro drug release (94.9%) over 24 h, and this was further investigated in in vivo studies. F9 was composed of 15% oil, 60% Smix, and 25% water and had the lowest droplet size (17.505 ± 0.247 nm), low PDI (0.147 ± 0.014), low ZP (-13.35 mV), highest %T (99.15 ± 0.131) and optimum increases in the relative bioavailability (703.66%) compared to APR suspension (100%) over 24 h. These findings showed that APR-SNEDDS is a possible alternative delivery system for APR. Further studies are warranted to evaluate the major factors that influence the encapsulation efficiency and stability of APR-containing SNEDDS.

Development of Apremilast Nanoemulsion-Loaded Chitosan Gels: In Vitro Evaluations and Anti-Inflammatory and Wound Healing Studies on a Rat Model

Apremilast (APL) has profound anti-inflammatory and wound healing activity, alongside other dermal care. This study aims to develop APL-loaded NEs (ANE1-ANE5) using eucalyptus oil (EO) as the oil and Tween-80 and transcutol-HP (THP) as a surfactant and co-surfactant, respectively. The prepared NEs were then evaluated based on mean droplet size (12.63 ± 1.2 nm), PDI (0.269 ± 0.012), ZP (−23.00 ± 5.86), RI (1.315 ± 0.02), and %T (99.89 ± 0.38) and ANE4 was optimized. Further, optimized NEs (ANE4) were incorporated into chitosan gel (2%, w/v). The developed ANE4-loaded chitosan gel was then evaluated for pH, spreadability, in vitro diffusion, and wound healing and anti-inflammatory studies. Moreover, in vivo studies denoted improved anti-inflammatory and wound healing activity and represented a decrease in wound size percentage (99.68 ± 0.345%) for the APNE2 gel test compared to a negative control (86.48 ± 0.87%) and standard control (92.82 ± 0.34%). Thus, the formulation of ANE4-loaded chitosan gels is an efficient topical treatment strategy for inflammatory and wound healing conditions.

Preclinical activity of fluvastatin-loaded self-nanoemulsifying delivery system against breast cancer models: Emphasis on apoptosis

Statins trigger apoptotic cell death in some types of growing tumor cells in a cholesterol-lowering-independent manner. Self-nanoemulsifying delivery systems (SNEDs) are potentially effective for the suppression of breast cancer development. This study aims to investigate the potential anticancer activity of fluvastatin (FLV)-SNEDs in breast cancer while comparing it with FLV in vitro as well as in vivo exploiting/using MDA-MB-231 and Erhlich ascites carcinoma (EAC)-bearing mice, respectively. Biochemical analysis of liver and kidney functions, oxidative stress markers, and histopathological examinations of such tumor tissues were performed showing the potentiality of SNEDs as a nanocarrier for antitumor agents. FLV-SNEDs demonstrated more potent anticancer activity compared to FLV on MDA-MB-231 and hepatocellular carcinoma (HepG2) cells. In vivo experiments on the EAC-bearing mice model indicated that FLV and-to a greater extent-FLV-SNEDs ameliorated EAC-induced hepatotoxicity and nephrotoxicity. FLV or FLV-SNEDs evidently reduced the percent of Ki-67 +ve EAC cells by 57.5% and 86.5% in comparison to the vehicle-treated EAC group. In addition, FLV or FLV-SNEDs decreased Bcl-2 levels in serum and liver specimens. In contrast, FLV or FLV-SNEDs significantly activated the executioner caspase-3. Simultaneously, both FLV and FLV-SNEDs stimulated p53 signaling and modulated Bcl-2 protein levels in treated cells. Collectively, these results support the contribution of apoptotic cell death in mediating the anticancer activities of FLV and FLV-SNEDs against murine EAC model in vivo. This study provides new understandings of how FLV and FLV-SNEDs regulate EAC cell viability via upregulation of p53 signaling, and through modulation of cleaved caspase-3 as well as antiapoptotic Bcl-2 marker.

Hepatoprotective Effects of Bioflavonoid Luteolin Using Self-Nanoemulsifying Drug Delivery System

Luteolin (LUT) is a natural pharmaceutical compound that is weakly water soluble and has low bioavailability when taken orally. As a result, the goal of this research was to create self-nanoemulsifying drug delivery systems (SNEDDS) for LUT in an attempt to improve its in vitro dissolution and hepatoprotective effects, resulting in increased oral bioavailability. Using the aqueous phase titration approach and the creation of pseudo-ternary phase diagrams with Capryol-PGMC (oil phase), Tween-80 (surfactant), and Transcutol-HP (co-emulsifier), various SNEDDS of LUT were generated. SNEDDS were assessed for droplet size, polydispersity index (PDI), zeta potential (ZP), refractive index (RI), and percent of transmittance (percent T) after undergoing several thermodynamic stability and self-nanoemulsification experiments. When compared to LUT suspension, the developed SNEDDS revealed considerable LUT release from all SNEDDS. Droplet size was 40 nm, PDI was <0.3, ZP was -30.58 mV, RI was 1.40, percent T was >98 percent, and drug release profile was >96 percent in optimized SNEDDS of LUT. For in vivo hepatoprotective testing in rats, optimized SNEDDS was chosen. When compared to LUT suspension, hepatoprotective tests showed that optimized LUT SNEDDS had a substantial hepatoprotective impact. The findings of this investigation suggested that SNEDDS could improve bioflavonoid LUT dissolution rate and therapeutic efficacy.

Self-microemulsifying Drug Delivery System for Problematic Molecules: An Update

BACKGROUND

The poor bioavailability of a problematic molecule is predominantly due to its high lipophilicity, low solubility in gastric fluids and/or high fist pass metabolism. Self microemulsifying drug delivery system (SMEDDS), a lipidic type IV nano-formulation has been of interest in the field of pharmaceutical research due to its potential for tailoring the physicochemical properties of pharmaceutical molecules.

METHODS

This review provides insights on various recent innovations and reports from the past seven years (2012-2019) of self-emulsifying formulations for the delivery of various types of poorly soluble drugs, phytoconstituents and high molecular peptides and gives exhaustive details of the outcome of the endeavors in this field.

RESULTS

Various types of innovative formulations have been molded from SMEDDS like selfemulsifying powders, granules, tablets, pellets, eutectic and cationic formulations. Till date, many research reports and patents have been filed on self-emulsifying dosage forms and many formulations have gained US-FDA approvals which are summarized in the review article.

CONCLUSION

This review content highlighted the increasing scope of SMEDDS in augmenting the physiochemical properties of an API, the variegated formulation types and the attributes of API that can be improved by SMEDD based formulations.

Anticancer Efficacy of Self-Nanoemulsifying Drug Delivery System of Sunitinib Malate

Sunitinib malate (SM) is reported as a weakly soluble drug in water due to its poor dissolution rate and oral bioavailability. Hence, in the current study, various "self-nanoemulsifying drug delivery systems (SNEDDS)" of SM were prepared, characterized and evaluated for the enhancement of its in vitro dissolution rate and anticancer efficacy. On the basis of solubilization potential of SM in various excipients, "Lauroglycol-90 (oil), Triton-X100 (surfactant) and Transcutol-P (cosurfactant)" were selected for the preparation of SM SNEDDS. SM-loaded SNEDDS were developed by spontaneous emulsification method, characterized and evaluated for "thermodynamic stability, self-nanoemulsification efficiency, droplet size, polydispersity index (PDI), zeta potential (ZP), surface morphology, refractive index (RI), the percent of transmittance (% T) and drug release profile." In vitro dissolution rate of SM was significantly enhanced from an optimized SNEDDS in comparison with SM suspension. The optimized SNEDDS of SM with droplet size of 42.3 nm, PDI value of 0.174, ZP value of -36.4 mV, RI value of 1.339, % T value of 97.3%, and drug release profile of 95.4% (after 24 h via dialysis membrane) was selected for in vitro anticancer efficacy in human colon cancer cells (HT-29) by MTT assay. MTT assay indicated significant anticancer efficacy of optimized SM SNEDDS against HT-29 cells in comparison with free SM. The results of this study showed the great potential of SNEDDS in the enhancement of in vitro dissolution rate and anticancer efficacy of poorly soluble drug such as SM.