Synergistic catalysis of monometallic (Ag, Au, Pd) and bimetallic (Ag Au, Au Pd) versus trimetallic (Ag-Au-Pd) nanostructures effloresced via analogical techniques

Decoration of copper nanoparticles (Cu2O NPs) over chitosan-guar gum: Its application in the Sonogashira cross-coupling reactions and treatment of human lung adenocarcinoma

This study outlines the sustainable synthesis of hybrid biopolymer hydrogels supported with octahedral Cu2O nanoparticles (NPs), alongside their biological assessments and characterizations. A composite hydrogel made of chitosan and guar gum (CS-GG) was employed as a template for the environmentally friendly synthesis of nanoparticles. Leveraging their electron-rich functional groups, the biopolymers acted as stabilizing agents for the Cu2O NPs and as green reductants, facilitating the reduction of copper ions. The material's physicochemical properties were thoroughly examined using advanced techniques, such as X-ray diffraction (XRD), Field-Emission Scanning Electron Microscopes (FE-SEM), Eneregy Dispersive X-ray Electron Spectroscopy (EDX), Fourier Transformed Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM) and ICP-OES. The resulting CS-GG/Cu2O NPs nanocomposite was investigated as a reusable heterogeneous nanocatalyst, demonstrating its efficiency in the phosphine-free, palladium-free, and ligand-free synthesis of various stilbene derivatives with high yields through the Sonogashira coupling reaction. The catalyst showed no significant reduction in activity after being reused seven times consecutively. The cytotoxic effects of the CS-GG/Cu2O NPs nanocomposite on NCI-H661 lung cancer cells and normal cells (HUVEC) were assessed over 48 h using MTT assay. The cancer cell's viability decreased after exposure to the CS-GG/Cu2O NPs, with an IC50 value of 82 μg/mL. The CS-GG/Cu2O NPs nanocomposite controls the phosphatidylinositol 3-kinase (PI3K)/protein kinase B (AKT)/mammalian target of rapamycin (mTOR) system, which in turn impacts apoptosis and cell proliferation in NCI-H661 cells, according to a detailed examination of the mTOR pathway. The pathway could act a role in the cell cycle inhibition and apoptosis induced by the CS-GG/Cu2O NPs nanocomposite. The CS-GG/Cu2O NPs nanocomposite could be a useful natural anti-cancer agent for the treatment of lung cancer.

Asymmetric magnetic nanosnowman loaded with AgPd nanocage toward NIR-enhanced catalytic activity

Although bimetallic noble nanostructures often possess high activity in nanocatalysis, their controllable fabrication, tunable catalytic activity, and easy separation remain significant challenges. In this study, an Fe3O4@AgPd/Polydopamine (Fe3O4@AgPd/PDA) nanosnowman loaded with an AgPd nanocage was designed by a one-step template-disposition-redox polymerization method. The AgPd nanocage endowed the product with high catalytic activity for the reduction of organic pollutants (4-NP, MO, MB). Interestingly, under near-infrared (NIR) light, the catalytic kinetics of the Fe3O4@AgPd/PDA nanosnowman on catalytic reduction of organic pollutants increased by 2.6, 1.57, and 5.45 times, respectively. The asymmetric nanostructure facilitated the separation of electron-hole pairs, promoted electron transfer, and accelerated the catalytic activity. Density functional theory (DFT) analysis indicated that the electron transfer between the AgPd alloy and the Fe3O4 nanosphere played a critical role on the high catalytic activity. Moreover, Fe3O4@AgPd/PDA also demonstrated excellent catalytic activity in the Heck carbon-carbon coupling reaction with a >95% conversion rate and >99% selectivity. Owing to the well-encapsulated PDA shell and outstanding magnetic properties, the Fe3O4@AgPd/PDA nanosnowman exhibited good cyclic catalytic activity. With its multi-mode catalysis, NIR-enhanced catalytic activity, and easy separation, the Fe3O4@AgPd/PDA nanosnowman exhibits great application potential in nanocatalysis.

Surface Passivation of Carbon Dots for Tunable Biological Performance

Recent investigations were shifted this trend toward exploring the biomedical applicability of CDs, relevant to chronic diseases. Herein, a systematic approach is demonstrated for studying the effect of variation in the surface passivation of CDs for tuning its optical character and biological performance. Alginate and pectin were successfully clustered oxygen-surface passivated CDs, while, chitin was used to nucleate nitrogen-surface passivated CDs. Pectin-treated with base (4.1 ± 1.8 nm) and chitin-treated acid (3.5 ± 1.7 nm) were ingrained the smallest O-surface passivated CDs and N-surface passivated CDs, respectively. However, N-surface passivated CDs were shown with the highest optical activity. CDs colloids prepared from alginate, pectin & chitin, resulted in reduction of tumor cell viability percentage to be 80.8%, 74.0% & 69.0% respectively. O-surface passivated CDs nucleated from alginate showed the highest anti-proliferative effects. Moreover, O-surface passivated CDs (from alginate) showed the supremacy in inhibition of inflammation, while, increasing of its concentration ten times resulted in significant increment in inhibition percent to be 28% & 42%, using 1 μg/mL & 10 μg/mL, respectively. In summarization, it could be decided that, compared to N-surface passivated CDs (from chitin), O-surface passivated CDs (from alginate) showed excellency in application as a concurrent anti-inflammatory/antitumor drug, to be applied as a potential therapeutical reagent for treatment of inflammation, in production of vaccines, immune-therapeutics, and immune-suppressive drugs.

Gamma Radiation Induced Synthesis of Novel Chitosan/Gold/Bioactive Glass Nanocomposite for Promising Antimicrobial, and Antibiofilm Activities

In the present study we reported, for the first time, the gamma irradiation induced synthesis of chitosan/Au/bioactive glass (CS/Au/BG) nanocomposite. The bioactive glass (BG), with the composition 45% SiO2, 32.5% CaO, 15% Na2O, and 7.5% P2O5 wt% was synthesized through the sol–gel technique. XRD, SEM, EDX, and elemental mapping images were utilized to evaluate the structure of pure BG and CS/Au/BG nanocomposite. The antimicrobial efficacy was evaluated by zone of inhibition (ZOI), minimum inhibitory concentration (MIC), growth curve assay, and Ultraviolet irradiation effect. Investigation was carried on the antibiofilm effectiveness. Membrane leakage as well as SEM imaging were used to evaluate the antibacterial reaction mechanism. The crystallite size of CS/Au/BG nanocomposite was determined via Scherer equation as 22.83 nm. CS/Au/BG possessed the most ZOI activity against the tested microbes. The highest inhibition % of BG, and CS/Au/BG nanocomposite was investigated for S. aureus (15.65%, and 77.24%), followed by C. albicans (13.32%, and 64.75%). The quantity of protein leakage was directly-proportional after increasing the concentration of BG, and CS/Au/BG and counted to be 70.58, and 198.25 µg/mL, respectively (after applied 10 mg/mL). The promising results suggested the use of novel CS/Au/BG nanocomposite as an encourage candidate for wastewater treatment application against pathogenic microbes.

Detoxifying SARS-CoV-2 antiviral drugs from model and real wastewaters by industrial waste-derived multiphase photocatalysts

The use of antiviral drugs has surged as a result of the COVID-19 pandemic, resulting in higher concentrations of these pharmaceuticals in wastewater. The degradation efficiency of antiviral drugs in wastewater treatment plants has been reported to be too low due to their hydrophilic nature, and an additional procedure is usually necessary to degrade them completely. Photocatalysis is regarded as one of the most effective processes to degrade antiviral drugs. The present study aims at synthesizing multiphase photocatalysts by a simple calcination of industrial waste from ammonium molybdate production (WU photocatalysts) and its combination with WO₃ (WW photocatalysts). The X-ray diffraction (XRD) results confirm that the presence of multiple crystalline phases in the synthesized photocatalysts. UV-Vis diffuse reflectance spectra reveal that the synthesized multiphase photocatalysts absorb visible light up to 620 nm. Effects of calcination temperature of industrial waste (550-950 °C) and WO₃ content (0-100%) on photocatalytic activity of multiphase photocatalysts (WU and WW) for efficient removal of SARS-CoV-2 antiviral drugs (lopinavir and ritonavir) in model and real wastewaters are studied. The highest k₁ value is observed for the photocatalytic removal of ritonavir from model wastewater using WW4 (35.64 ×10^-2 min^-1). The multiphase photocatalysts exhibit 95% efficiency in the photocatalytic removal of ritonavir within 15 of visible light irradiation. In contrast, 60 min of visible light irradiation is necessary to achieve 95% efficiency in the photocatalytic removal of lopinavir. The ecotoxicity test using zebrafish (Danio rerio) embryos shows no toxicity for photocatalytically treated ritonavir-containing wastewater, and the contrary trend is observed for photocatalytically treated lopinavir-containing wastewater. The synthesized multiphase photocatalysts can be tested and applied for efficient degradation of other SARS-CoV-2 antiviral drugs in wastewater in the future.

Synthesis and potential applications of trimetallic nanostructures

The present review highlights the synthetic strategies and potential applications of TMNs for organic reactions, environmental remediation, and health-related activities.

Nanoengineering of eco-friendly silver nanoparticles using five different plant extracts and development of cost-effective phenol nanosensor

The production of environmentally friendly silver nanoparticles (AgNPs) has aroused the interest of the scientific community due to their wide applications mainly in the field of environmental pollution detection and water quality monitoring. Here, for the first time, five plant leaf extracts were used for the synthesis of AgNPs such as Basil, Geranium, Eucalyptus, Melia, and Ruta by a simple and eco-friendly method. Stable AgNPs were obtained by adding a silver nitrate (AgNO₃) solution with the leaves extract as reducers, stabilizers and cappers. Only, within ten minutes of reaction, the yellow mixture changed to brown due to the reduction of Ag⁺ ions to Ag atoms. The optical, structural, and morphology characteristics of synthesized AgNPs were determined using a full technique like UV-visible spectroscopy, FTIR spectrum, XRD, EDX spectroscopy, and the SEM. Thus, Melia azedarach was found to exhibit smaller nanoparticles (AgNPs-M), which would be interesting for electrochemical application. So, a highly sensitive electrochemical sensor based on AgNPs-M modified GCE for phenol determination in water samples was developed, indicating that the AgNPs-M displayed good electrocatalytic activity. The developed sensor showed good sensing performances: a high sensitivity, a low LOD of 0.42 µM and good stability with a lifetime of about one month, as well as a good selectivity towards BPA and CC (with a deviation less than 10%) especially for nanoplastics analysis in the water contained in plastics bottles. The obtained results are repeatable and reproducible with RSDs of 5.49% and 3.18% respectively. Besides, our developed sensor was successfully applied for the determination of phenol in tap and mineral water samples. The proposed new approach is highly recommended to develop a simple, cost effective, ecofriendly, and highly sensitive sensor for the electrochemical detection of phenol which can further broaden the applications of green silver NPs.

Zirconia supported gold-palladium nanocatalyst for NAD(P)H regeneration via two-step mechanism

The regeneration cycle of expensive cofactor, NAD(P)H, is of paramount importance for the bio-catalyzed redox reactions. Here a ZrO₂supported bimetallic nanocatalyst of gold-palladium (Au-Pd/ZrO₂) was prepared to catalyze the regeneration of NAD(P)H without using electron mediators and extra energy input. Over 98% of regeneration efficiency can be achieved catlyzed by Au-Pd/ZrO₂using TEOA as the electron donor. Mechanism study showed that the regeneration of NAD(P)H took place through a two-step process: Au-Pd/ZrO₂nanocatalyst first catalyzed the oxidation of triethanolamine (TEOA) to glycolaldehyde (GA), then the generated GA induced the non-catalytic reducing of NAD(P)⁺to NAD(P)H under an alkaline environment maintained by TEOA. This two-step mechanism enables the decoupling of the regeneration of NAD(P)H in space and time into a catalytic oxidation and non-catalytic reducing cascade process which has been further verified using a variety of electron donors. The application significance of this procedure is further demonstrated both by the favorable stability of Au-Pd/ZrO₂nanocatalyst in 5 successive cycles preserving over 90% of its original activity, and by the excellent performance of the regenerated NADH as the cofactor in the catalytic hydrogenation of acetaldehyde using an ethanol dehydrogenase.

Rapid Antibacterial Effects of Silk Fabric Constructed through Enzymatic Grafting of Modified PEI and AgNP Deposition

Enzymatic antibacterial finishing is an eco-friendly alternative to develop functional silk-based materials. However, the low accessibility of tyrosine residues distributed in fibroin chains restricts the laccase-mediated functionalization of silk fibers (SF). To address this issue, a highly reactive p-hydroxyphenylacetic acid-modified polyethyleneimine (mPEI) was enzymatically grafted onto fibroin using laccase, aiming at constructing an antibacterial matrix of mPEI on the fiber surface. Subsequently, in situ deposition of silver nanoparticles (i.e., AgNPs) into the newly built mPEI network was performed to form a rapid antibacterial layer. The results indicated that laccase efficiently catalyzes the mPEI coupling, the zeta potential of SF-g-mPEI increases from -32 to 21.70 mV, and the silver content reaches 1.81% after AgNP embedment. Based on the combined two-step treatments, the obtained silk fabric exhibited excellent antibacterial abilities against two bacteria, including Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The antibacterial rates of both bacteria reached 99.9% within 30 min of contact, remaining over 99.9% within 18 h of contact even after washing 10 times. The present work provides an enzyme-mediated method for construction of silk fabric with durable and rapid antibacterial activity.

UV and visible-assisted photocatalytic degradation of pharmaceutical pollutants in the presence of rational designed biogenic Fe3O4-Au nanocomposite

In this study, we designed Fe3O4 nanoparticles and heterogeneous Fe3O4-Au nanocomposites with a mean size of 21 and 27 nm that synthesized by Foeniculum vulgare seed extract to photodegrade organic micropollutants under UV and visible light irradiation. The physiochemical characteristics of biogenic nanoparticles/nanocomposite are described by XRD, FTIR, UV-Vis, SEM, EDX, and X-ray elemental mapping. In the presence of nanoparticles and nanocomposites under UV irradiation, the total degradation of contaminants is about 85-90% after 2100 s, while under visible light irradiation, degradation efficiencies are about 70-85% after 4800-s irradiation. Total organic carbon analysis results confirmed photodegradation efficacies. Also, the scavenger's experiments show that hydroxyl radical is the most important specie in the degradation of pollutant model. It can be concluded clearly that Fe3O4 green nanoparticles and Fe3O4-Au green nanocomposite are very simple and effective photocatalyst for degradation of organic pollutants in very short time under illumination.

Antitumor/antiviral carbon quantum dots based on carrageenan and pullulan

Requirement for medication from pathogenic human viruses and cancer diseases are urgently considered, while, numerous reports were focused on investigating easily manufactured and excellently effective therapeutic reagents. Herein, CQDs were prepared with size of 2.1 nm from both of carrageenan and pullulan. CQDs nucleated from pullulan showed higher anti-proliferative effects against cancer cells, while, treatment with 100 μg/mL of CQDs colloids originated from pullulan and carrageenan separately resulted in diminishing of cancer cell viability percent to be 42.1 & 58.7%, respectively. Plaque reduction assay was also affirmed that, 2.5 μg/L of both of pullulan and carrageenan based CQDs exhibited viral inhibition with percent of 44.3& 59.5%, respectively. As a conclusion, pullulan showed seniority over carrageenan in nucleation of CQDs with higher anticancer activities. While, estimation of antiviral performance of the prepared CQDs confirmed the priority of carrageenan compared to pullulan in preparation of CQDs as antiviral laborer.

Environmentally exploitable biocide/fluorescent metal marker carbon quantum dots

Carbon quantum dots are currently investigated to act as safe/potent alternatives for metal-based nanostructures to play the role of probes for environmental applications owing to their low toxicity, low cost, chemical inertness, biocompatibility and outstanding optical properties. The synthesis of biocide/fluorescent metal marker carbon quantum dots with hydrophilic character was performed via a quite simple and green technique. The natural biopolymer that was used in this study for the synthesis of carbon quantum dots is fragmented under strong alkaline conditions. Afterwards, under hydrothermal conditions, re-polymerization, aromatization and subsequent oxidation, the carbonic nanostructures were grown and clustered. Dialysis of the so-produced carbonic nanostructures was carried out to obtain highly purified/mono-dispersed carbon quantum dots with a size distribution of 1.5-6.5 nm. The fluorescence intensity of the synthesized carbon quantum dots under hydrothermal conditions for 3 h was affected by dialysis, however, the fluorescence intensity was significantly increased ca. 20 times. The synthesized carbon quantum dots were exploited as fluorescent markers in the detection of Zn2+ and Hg2+. The prepared carbon quantum dots also exhibited excellent antimicrobial potency against Bacillus cereus, Escherichia coli and Candida albicans. The detected minimal inhibitory concentration for the dialyzed CQDs towards the tested pathogens was 350-450 μL mL-1. The presented approach is a simple and green technique for the scaled-up synthesis of biocide/fluorescent marker carbon quantum dots instead of metal-based nanostructures for environmental applications, without using toxic chemicals or organic solvents.

Morphology Evolution of Nanoscale-Thick Au/Pd Bimetallic Films on Silicon Carbide Substrate

Bimetallic Au/Pd nanoscale-thick films were sputter-deposited at room temperature on a silicon carbide (SiC) surface, and the surface-morphology evolution of the films versus thickness was studied with scanning electron microscopy. This study allowed to elucidate the Au/Pd growth mechanism by identifying characteristic growth regimes, and to quantify the characteristic parameters of the growth process. In particular, we observed that the Au/Pd film initially grew as three-dimensional clusters; then, increasing Au/Pd film thickness, film morphology evolved from isolated clusters to partially coalesced wormlike structures, followed by percolation morphology, and, finally, into a continuous rough film. The application of the interrupted coalescence model allowed us to evaluate a critical mean cluster diameter for partial coalescence, and the application of Vincent's model allowed us to quantify the critical Au/Pd coverage for percolation transition.

Metal-dependent nano-catalysis in reduction of aromatic pollutants

Nanostructures have great potential in catalysis and their compositions may cause some interferences in the reactivity. Therefore, the present study focuses on comparison between three metallic nanoparticle-based Ag, Au, and Pd as nano-catalyst in reduction of aromatic pollutants. To neglect any interpenetration in their catalytic reactivity, the metallic nanoparticles were prepared via a consistent and reproducible one-step method with alkali-activated dextran. Interestingly, small sized/spherical AgNPs, AuNPs, and PdNPs were successively prepared with particle size of 3.4, 8.3, and 17.1 nm, respectively. The catalytic performance of the synthesized NPs was estimated for the reduction of p-nitroaniline and methyl red dye as different aromatic pollutants. Regardless of the particle size, there was a strong relation between catalytic action and the type of metal which followed the order of PdNP > AuNPs > AgNPs. Graphical Abstract.

Ultrafine AuPd nanoparticles supported on amine functionalized monochlorotriazinyl β-cyclodextrin as highly active catalysts for hydrogen evolution from formic acid dehydrogenation

Au_0.3Pd_0.7/A-M-β-CD exhibits remarkable catalytic activity for hydrogen evolution from formic acid, which is attributed to strong metal–support interaction.

Facile aqueous-phase synthesis of Ag-Cu-Pt-Pd quadrometallic nanoparticles

Ag-Cu-Pt-Pd quadrometallic nanoparticles which small Pt and Pd nanoparticles were attached on the surface of AgCu Janus nanoparticles were firstly synthesized by sequential reduction of Pt and Pd precursor in the presence of Janus AgCu bimetallic nanoparticles as seeds in an aqueous solution. Even though there was a small amount of Cu2O on the surface, the synthesized nanoparticles were mainly composed of four independent metallic part, not alloy parts. By theoretical calculation and growth mechanism study, we found that different reducing rate between Ag+ and Cu2+ and sequential reduction of Pt and Pd precursors would be key roles for the formation of the quadrometallic nanoparticles.

Carboxymethyl Chitosan Modified Carbon Nanoparticle for Controlled Emamectin Benzoate Delivery: Improved Solubility, pH-Responsive Release, and Sustainable Pest Control

Environmentally friendly pesticide delivery systems have drawn extensive attention in recent years, and they show great promise in sustainable development of agriculture. We herein report a multifunctional nanoplatform, carboxymethyl chitosan modified carbon nanoparticles (CMC@CNP), as the carrier for emamectin benzoate (EB, a widely used insecticide), and investigate its sustainable antipest activity. EB was loaded on CMC@CNP nanocarrier via simple physisorption process, with a high loading ratio of 55.56%. The EB@CMC@CNP nanoformulation showed improved solubility and dispersion stability in aqueous solution, which is of vital importance to its practical application. Different from free EB, EB@CMC@CNP exhibited pH-responsive controlled release performance, leading to sustained and steady EB release and prolonged persistence time. In addition, the significantly enhanced anti-UV property of EB@CMC@CNP further ensured its antipest activity. Therefore, EB@CMC@CNP exhibited superior pest control performance than free EB. In consideration of its low cost, easy preparation, free of organic solution, and enhanced bioactivity, we expect, CMC@CNP will have a brilliant future in pest control and green agriculture.

Green synthesis of Ag@Au bimetallic regenerated cellulose nanofibers for catalytic applications

Highly active and reusable bimetallic Ag@Au/CNC nanocomposite was successfully obtainedviaa simple green synthesis for the reduction of nitrophenol and aza-Michael reaction.