Ionic liquid covered iron-oxide magnetic nanoparticles decorated zeolite nanocomposite for excellent catalytic reduction and degradation of environmental toxic organic pollutants and dyes

Evaluating the fixed-bed column adsorption capacity of olive pomace biochar activated with KOH and H3PO4 for olive mill wastewater treatment: Insights from TOC and HPLC analysis

This study explores the treatment of olive mill wastewater (OMWW) using activated carbon derived from olive mill solid waste (OMSW). The OMSW was first converted into biochar on a pilot scale and then activated using potassium hydroxide (KOH) and phosphoric acid (H3PO4). Characterization revealed that AC/KOH had a higher BET surface area (829 m2 g-1) than AC/H3PO4 (749 m2 g-1). Fixed-bed column experiments showed breakthrough times of 250 min for AC/KOH and 220 min for AC/H3PO4. The adsorption capacities determined by the Thomas model were 275.9 mg g-1 for total phenolics (TP), 774.7 mg g-1 for total organic carbon (TOC) with AC/KOH, and 309.1 mg g-1 for TP, 823.5 mg g-1 for TOC with AC/H3PO4. The Adams-Bohart model showed kinetic constants (KAB) of 0.332 for TP and 3.66∗10-5 for TOC with AC/KOH, compared to 0.1926 for TP and 2.21∗10-5 for TOC with AC/H3PO4. The Yoon-Nelson model indicated τ50 % values of 171.57 min for TP 60.39 min for TOC with AC/KOH, 111.79 min for TP, and 41.75 min for TOC with AC/H3PO4. High-performance liquid chromatography (HPLC) analysis revealed hydroxytyrosol concentration decreased from 4.9 g.L-1 to 0.37 g.L-1 with AC/H3PO4 and 0.42 g.L-1 with AC/KOH. The total phenolic concentration reduced from 5.57 g.L-1 in untreated OMWW to 0.66 g.L-1 with AC/H3PO4 and 0.84 g.L-1 with AC/KOH. These results demonstrate that both activated carbons effectively reduce phenolic concentrations. This study achieves some of the highest adsorption capacities reported for OMWW treatment, this technique demonstrates the outstanding performance of the developed materials. Unlike most research, which focuses on static conditions, less than 10 % of studies explore dynamic fixed-bed setups, underscoring the novelty of this work. The materials can be easily integrated into conventional treatment processes, providing a cost-effective and sustainable solution. By utilizing byproducts from the olive oil industry to treat its wastewater, the approach creates a closed-loop system. Furthermore, the activated carbons are regenerable and reusable, enhancing their practicality while enabling the recovery of valuable polyphenols for added resource valorization.

Silver decorated zeolite embedded in bionanocomposite hydrogels based on cross-linked carboxymethyl cellulose for excellent catalytic hydrogenation of azo dyes

Herein, bionanocomposite beads based on Carboxymethyl cellulose/Dextrant sulfate (CMC/DS) embedding silver nanoparticle-functionalized zeolite (AgZ) were developed and proposed as catalysts for catalytic hydrogenation of Direct Red 16 (DR16) azo dye under different experimental parameters. The obtained results showed that AgZ incorporation into the polymer matrix produced highly porous structures with improved thermal stability. For antibacterial application, it was shown that the engineered bionanocomposites were effective against all tested bacteria. The CMC-DS-AgZ catalysts showed good catalytic performances for the hydrogenation of DR16 in various real-life water samples and even in presence of several mineral salts, however with a high efficiency (99 %) obtained for the catalyst prepared at elevated AgZ content (with a kapp rate constant of 0.239 min-1). Moreover, the hydrogenation study of various azo dyes highlighted the satisfactory application potential of the catalysts and their versatility. The catalyst beads showed good recyclability for five successive cycles without any significant loss of efficiency or stability. The proposed mechanism for DR16 catalytic hydrogenation on C3-D1-AgZ revealed that AgZ could enhance the catalytic activity of the beads by facilitating the formation of AgH intermediates. Finally, the green synthesized materials were shown to be viable and potential candidates for the purification of environmental media.

Novel magnetic bimetallic AuCu catalyst for reduction of nitroarenes and degradation of organic dyes

Herein, core-shell magnetic nanoparticles are modified with imidazolium-tagged phosphine and propylene glycol moieties and used for the stabilization of bimetallic AuCu nanoparticles. The structure and morphology of the prepared material are identified with SEM, TEM, XRD, XPS, atomic absorption spectroscopy, Fourier translation infrared spectroscopy, and a vibrating sample magnetometer. This hydrophilic magnetic bimetallic catalyst is applied in the reduction of toxic nitroarenes and reductive degradation of hazardous organic dyes such as methyl orange (MO), methyl red (MR), and rhodamine B (RhB), as well as in the degradation of tetracycline (TC). This magnetic AuCu catalyst indicated superior activity in all three mentioned reactions in comparison with its single metal Au and Cu analogs. This catalyst is recycled for 17 consecutive runs in the reduction of 4-nitrophenol to 4-aminophenol without a significant decrease in catalytic activity and recycled catalyst is characterized.

Hydrogen bond-mediated self-assembly of Tin (II) oxide wrapped with Chitosan/[BzPy]Cl network: An effective bionanocomposite for textile wastewater remediation

A novel and efficient bionanocomposite was synthesized by incorporating SnO into chitosan (Ch) and a room-temperature ionic liquid (RTIL). The bionanocomposite was synthesized in benzoyl pyridinium chloride [BzPy]Cl to maintain the unique properties of SnO, chitosan, and the ionic liquid. Adsorption and photodegradation processes were applied to evaluate the bionanocomposite for removing azo and anthraquinone dyes and textile wastewater. SnO/[BzPy]Cl and SnO/[BzPy]Cl/Ch samples were prepared and characterized using various techniques, including FT-IR, SEM, XRD, EDAX, XPS, DSC, TGA, nitrogen adsorption/desorption isotherm, and DRS analysis. SEM analysis revealed a hierarchical roughened rose flower-like morphology for the biocomposite. The band gap energies of SnO/[BzPy]Cl and SnO/[BzPy]Cl/chitosan were found to be 3.9 and 3.3 eV, respectively, indicating a reduction in the band gap energy with the introduction of [BzPy]Cl and chitosan. SnO/[BzPy]Cl/Ch showed high removal rates (92-95 %) for Fast Red, Blue 15, Red 120, Blue 94, Yellow 160, and Acid Orange 7 dyes. The adsorption kinetics followed a pseudo-second-order model. In addition, the effect of different photodegradation parameters such as solution pH, dye concentrations, contact time, and amount of photocatalyst, was studied. Given the optimal results obtained in removing azo and anthraquinone dyes, the SnO/[BzPy]Cl/Ch nanocomposite was used as an efficient nanocomposite for removing dyes from textile wastewater. The highest removal efficiency was found to be 95.8 %, obtained under ultraviolet and visible light. Furthermore, BOD and COD reduction analysis showed significant reductions, indicating the excellent performance of the photocatalyst.

The potential of zeolite nanocomposites in removing microplastics, ammonia, and trace metals from wastewater and their role in phytoremediation

Nanocomposites are emerging as a new generation of materials that can be used to combat water pollution. Zeolite-based nanocomposites consisting of combinations of metals, metal oxides, carbon materials, and polymers are particularly effective for separating and adsorbing multiple contaminants from water. This review presents the potential of zeolite-based nanocomposites for eliminating a range of toxic organic and inorganic substances, dyes, heavy metals, microplastics, and ammonia from water. The review emphasizes that nanocomposites offer enhanced mechanical, catalytic, adsorptive, and porosity properties necessary for sustainable water purification techniques compared to individual composite materials. The adsorption potential of several zeolite-metal/metal oxide/polymer-based composites for heavy metals, anionic/cationic dyes, microplastics, ammonia, and other organic contaminants ranges between approximately 81 and over 99%. However, zeolite substrates or zeolite-amended soil have limited benefits for hyperaccumulators, which have been utilized for phytoremediation. Further research is needed to evaluate the potential of zeolite-based composites for phytoremediation. Additionally, the development of nanocomposites with enhanced adsorption capacity would be necessary for more effective removal of pollutants.

Column adsorption of biological oxygen demand, chemical oxygen demand and total organic carbon from wastewater by magnetite nanoparticles-zeolite A composite

Herein, magnetite nanoparticles (NPs), zeolite A and magnetite-zeolite A (MAGZA) composite was developed by green methods. The produced nanomaterials were characterized and the effect of process parameters such as flow rate, adsorbent bed height and adsorbate inlet concentration was evaluated for the removal of biological oxygen demand (BOD), chemical oxygen demand (COD) and total organic carbon (TOC) in a column. The characterization results demonstrated the successful synthesis of magnetite NPs, zeolite A and MAGZA composite. The performance of the MAGZA composite in the fixed-bed column was superior to zeolite A and magnetite NPs. The parametric influence indicates that an increase in bed height and a decrease in the flow rate and inlet adsorbate concentration improved the performance of the adsorption column. The adsorption column demonstrated maximum performance at a flow rate (4 mL/min), bed height (5 cm) and inlet adsorbate concentration (10 mg/L). Under these conditions, the highest percent removal of BOD, COD and TOC were 99.96, 99.88 and 99.87%. Thomas and Yoon-Nelson's model suitably fitted the breakthrough curves. After five reusability cycles, the MAGZA composite demonstrated removal percent of BOD (76.5%), COD (55.5%) and TOC (64.2%). The produced MAGZA composite effectively removed BOD, COD and TOC from textile wastewater in a continuous operating mode.

Sugar based cationic magnetic core-shell silica nanoparticles for nucleic acid extraction

Nucleic acid (NA) extraction is an essential step in molecular testing for a wide range of applications. Conventional extraction protocols usually suffer from time consuming removal of non-nucleic acid impurities. In this study, a new magnetic nanoparticle (MNP) is presented to simplify the NA extraction. A core-shell design, comprising of a ferromagnetic core coated with mesoporous silica, forms the basis of the functional nanoparticle. Chemical functionalization of the silica coating includes a multistep synthesis, in which an activated nanoparticle is coupled with a triethylene glycol spaced glycosyl imidazole. The molecular design aims for charge interactions between the imidazolium-based positive nanoparticle surface and nucleic acids, with specific hydrogen bonding between the surface bonded carbohydrate and nucleic acid targets to ensure nucleic acid selectivity and avoid protein contamination. Two different carbohydrates, differing in molecular size, were selected to compare the efficiency in terms of NA extraction. A triethylene glycol spacer provides sufficient flexibility to remove particle surface constraints for the interaction. The Brunauer-Emmett-Teller (BET) analysis shows a significantly larger surface area for the disaccharide-based particles NpFeSiImMalt (∼181 m2 g-1) compared to the monosaccharide analogue NpFeSiImGlc (∼116 m2 g-1) at small particles sizes (range ∼ 15 nm) and sufficient magnetization (29 emu g-1) for easy isolation by an external magnetic field. The particles enabled a high DNA particle loading ratio of 30-45 wt% (MNP/DNA ratio), reflecting an efficient extraction process. A high desorption rate (7 min) with more than 86% of unchanged DNA loading was recorded, indicating low damage to the target extract.

Bioremediation and decontamination potentials of metallic nanoparticles loaded nanohybrid matrices - A review

The current nanotechnological advancements provide an astonishing insight to fabricate nanomaterials for nano-bioremediation purposes. Exciting characteristics possessed by hybrid matrices at the nanoscale knock endless opportunities to nano-remediate environmentally-related pollunanomaterials tants of emerging concern. Nanometals are considered among the oldest generation of the world has ever noticed. These tiny nanometals and nanometal oxides showed enormous potential in almost every extent of industrial and biotechnological domains, including their potential multipurpose approach to deal with water impurities. In this manuscript, we discussed their role in the diversity of water treatment technologies used to remove bacteria, viruses, heavy metals, pesticides, and organic impurities, providing an ample perspective on their recent advances in terms of their characteristics, attachment strategies, performance, and their scale-up challenges. Finally, we tried to explore their futuristic contribution to nano-remediate environmentally-related pollutants of emerging concern aiming to collect treated yet safe water that can be reused for multipurpose.