Structural and spectroscopic study of adsorption of naphthalene on silver

Adsorption of Silver Clusters on Naphthalene: Theoretical Insights into Structural, Energetic, Electronic, and Infrared Properties

In the present study, we carry out a comprehensive investigation of the structural, bonding, and infrared spectral properties of the low-energy complexes of silver clusters Agn (n = 1-8) adsorbed on naphthalene C10H8 (Nap). The structural properties are obtained through a systematic multimethod global optimization scheme. The potential energy surfaces of the complexes are first explored at the density functional-based tight binding level of theory via extensive Monte Carlo parallel tempering simulations complemented by gradient-driven quenching, thus providing prescreened samples of low-energy structural conformations. The most stable isomers are then reoptimized at the density functional theory level using a functional that includes dispersion, namely B3LYP-D3BJ. The properties of the global minima are analyzed at the latter level. Unsurprisingly, the structures of Agn adsorbates within the most stable complexes are close to those of the bare clusters. Regarding 2D Agn structures (n = 2-6), those with Agn perpendicular to the Nap plane are found to be the most stable for n = 2-4, while parallel conformations are preferred for n = 5 and 6. The significant role of dispersion interactions in the stability of these complexes is shown. The study of the influence of Agn adsorption on the evolution of the HOMO-LUMO band gaps and vertical ionization potentials (VIPs) shows that the odd-even alternation of the adsorbate cluster electronic properties is maintained and that the VIP decreases with size. Finally, the influence of the adsorption of Agn on the infrared properties of Nap is analyzed: small shifts are observed as well as the appearance of new bands due to symmetry reduction. The essential novelty consists of relative intensity changes reflecting charge transfer (though not dominant) from Nap to Agn. Our study globally shows that Nap-Agn interactions lead to a modulation of the electronic and vibrational properties of Agn and Nap. This could be of interest for structural diagnosis and reactivity. Perspectives concerning the use of the present structural search methodology for more complex hybrid metal-organic systems in various application fields are suggested.

Remote Raman Sensing Using a Single-Grating Monolithic Spatial Heterodyne Raman Spectrometer: A Potential Tool for Planetary Exploration

Advances in Raman instrumentation have led to the implementation of a remote dispersive Raman spectrometer on the Perseverance rover on Mars, which is used for remote sensing. For remote applications, dispersive spectrometers suffer from a few setbacks such as relatively larger sizes, low light throughput, limited spectral ranges, relatively low resolutions for small devices, and high sensitivity to misalignment. A spatial heterodyne Raman spectrometer (SHRS), which is a fixed grating interferometer, helps overcome some of these problems. Most SHRS devices that have been described use two fixed diffraction gratings, but a variance of the SHRS called the one-grating SHRS (1g-SHRS) replaces one of the gratings with a mirror, which makes it more compact. In a recent paper we described monolithic two-gratings SHRS, and in this paper, we investigate a single-grating monolithic SHRS (1g-mSHRS), which combines the 1g-SHRS with a monolithic setup previously tested at the University of South Carolina. This setup integrates the beamsplitter, grating, and mirror into a single monolithic device. This reduces the number of adjustable components, allows for easier alignment, and reduces the footprint of the device (35 × 35 × 25 mm with a weight of 80 g). This instrument provides a high spectral resolution (∼9 cm^-1) and large spectral range (7327 cm^-1) while decreasing the sensitivity to alignment with a field of view of 5.61 mm at 3m. We discuss the characteristics of the 1g-mSHRS by measuring the time-resolved remote Raman spectra of a few inorganic salts, organics, and minerals at 3 m. The 1g-mSHRS makes a good candidate for planetary exploration because of its large spectral range, greater sensitivity, competitively higher spectral resolution, low alignment sensitivity, and high light throughput in a compact easily aligned system with no moving parts.

Direct and Water-Mediated Adsorption of Stabilizers on SERS-Active Colloidal Bimetallic Plasmonic Nanomaterials: Insight into Citrate-AuAg Interactions from DFT Calculations

In previous studies, AuAg colloidal nanostar formulations were developed with the two-fold aim of producing optimized surface-enhanced Raman spectroscopy (SERS) substrates and investigating the nature of the capping process itself. Findings demonstrated that the nanoparticle metals are alloyed and neutral, and capping by stabilizers occurs via chemisorption. This study utilizes citrate as the model stabilizer and investigates the mechanistic aspects of its interaction with mono- (Au₂₀) and bimetallic (Au₁₉Ag) surfaces by density functional theory (DFT) calculations. Citrate was modeled according to the colloid's pH and surrounded by a water and sodium first solvation shell. A population of stable cluster-citrate structures was obtained, and energies were refined at the uB3LYP//LANL2TZ(f)/cc-pVTZ level of theory. Solvation was accounted for both explicitly and implicitly by the application of the continuum model SMD. Results indicate that both direct binding and binding by water proxy through the charge-transfer complex formation are thermodynamically favorable. Water participation in citrate adsorption is supported by the adsorption behavior observed experimentally and the comparison between experimental and DFT-simulated IR spectra. Vibrational mode analysis suggests the possible presence of water within a crystal in dried nanostar residues. All ΔG_ads(aq) indicate a weak chemisorptive process, leading to the hypothesis that citrate could be displaced by analytes during SERS measurements.

Nonionic and anionic surfactant-washing of polycyclic aromatic hydrocarbons in estuarine sediments around an industrial harbor in southern Taiwan

Various surfactants, such as nonionic Triton X-100 and Simple Green™ (SG), and anionic sodium dodecylsulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS) were utilized to remove polycyclic aromatic hydrocarbons (PAHs) from heavily contaminated harbor sediments dredged from Kaohsiung Harbor in Taiwan. Desorption/re-sorption equilibrium, kinetics, and washability of PAHs using the selected surfactant were evaluated under different critical micelle concentrations (CMC). Experimental results revealed that the desorption rate of high molecular weight PAHs was greater than those of low molecular weight PAHs, and the anionic SDS was relatively effective in the removal of total PAHs (>50%) compared to the other surfactants. The correlation between the effectiveness of the surfactant washing processes and the physicochemical properties of individual PAH was statistically analyzed. The resulting data suggested that hydrophobic factors (K_ow, K_oc and S_w) affected PAH treatability more than the reactivity of PAH (electron affinity and ionization potential). Since the adsorption of anionic surfactant altered the hydrophobicity of organic matter in the sediment, PAHs preferred transferring from the sediment to the hydrophobic core of micelles in aqueous solution. Nevertheless, the nonionic surfactant enhanced the PAH partition in the aqueous phase, thus increasing the micellar solubilization of PAH.

Zirconia-Supported Silver Nanoparticles for the Catalytic Combustion of Pollutants Originating from Mobile Sources

This work presents the physicochemical characterization and activity of zirconia-supported silver catalysts for the oxidation of pollutants present in diesel engine exhaust (propane, propene, naphthalene and soot). A series of silver-supported catalysts AgxZ (x = 1, 5 and 10 wt.%, Z = zirconia) were prepared, which were studied by various characterization techniques. The results show that silver is mainly found under the form of small metal nanoparticles (<10 nm) dispersed over the support. The metallic phase coexists with the AgOx oxidic phases. Silver is introduced onto the zirconia, generating Ag–ZrO2 catalysts with high activity for the oxidation of propene and naphthalene. These catalysts also show some activity for soot combustion. Silver species can contribute with zirconia in the catalytic redox cycle, through a synergistic effect, providing sites that facilitate the migration and availability of oxygen, which is favored by the presence of structural defects. This is a novel application of the AgOx–Ag/ZrO2 system in the combustion reaction of propene and naphthalene. The results are highly promising, given that the T50 values found for both model molecules are quite low.

Partial and Complete Substitution of the 1,4-Benzenedicarboxylate Linker in UiO-66 with 1,4-Naphthalenedicarboxylate: Synthesis, Characterization, and H2-Adsorption Properties

We describe the synthesis and corresponding full characterization of the set of UiO-66 metal-organic frameworks (MOFs) with 1,4-benzenedicarboxylate (C₆H₄(COOH)₂, hereafter H₂BDC) and 1,4-naphthalenedicarboxylate (C₁₀H₆(COOH)₂, hereafter H₂NDC) mixed linkers with NDC contents of 0, 25, 50, and 100%. Their structural (powder X-ray diffraction, PXRD), adsorptive (N₂, H₂, and CO₂), vibrational (IR/Raman), and thermal stability (thermogravimetric analysis, TGA) properties quantitatively correlate with the NDC content in the material. The UiO-66 phase topology is conserved at all relative fractions of BDC/NDC. The comparison between the synchrotron radiation PXRD and 77 K N₂-adsorption isotherms obtained on the 50:50 BDC/NDC sample and on a mechanical mixture of the pure BDC and NDC samples univocally proves that in the mixed linkers of the MOFs the BDC and NDC linkers are shared in each MOF crystal, discarding the hypothesis of two independent phases, where each crystal contains only BDC or NDC linkers. The careful tuning of the NDC content opens a way for controlled alteration of the sorption properties of the resulting material as testified by the H₂-adsorption experiments, showing that the relative ranking of the materials in H₂ adsorption is different in different equilibrium-pressure ranges: at low pressures, 100NDC is the most efficient sample, while with increasing pressure, its relative performance progressively declines; at high pressures, the ranking follows the BDC content, reflecting the larger internal pore volume available in the MOFs with a higher fraction of smaller linkers. The H₂-adsorption isotherms normalized by the sample Brunauer-Emmett-Teller specific surface area show, in the whole pressure range, that the surface-area-specific H₂-adsorption capabilities in UiO-66 MOFs increase progressively with increasing NDC content. Density functional theory calculations, using the hybrid B3LYP exchange correlation functional and quadruple-ζ with four polarization functions (QZ4P) basis set, show that the interaction of H₂ with the H₂NDC linker results in an adsorption energy larger by about 15% with respect to that calculated for adsorption on the H₂BDC linker.

Sensitive detection of polycyclic aromatic hydrocarbons with gold colloid coupled chloride ion SERS sensor

Highly sensitive detection of PAH by non-functionally modified gold colloid was realized by chloride ion coupling.