Synthesis, single crystal analysis and DFT based computational studies of 2,4-diamino-5-(4-chlorophenyl)-6-ethylpyrim idin-1-ium 3,4,5-trihydroxybenzoate -methanol (DETM)

Trimesic Acid as a Building Block for Ternary and Quaternary Salts and Salt Cocrystals

In the field of cocrystals, the synthon-based design of two-component crystals is well established and the interest is now shifting toward higher order cocrystals as the next challenge. Carboxylic acids form a robust synthon with pyridyl coformers and interact with 2-aminopyrimidines through a pair of strong, charge-assisted hydrogen bonds. In this work we describe the formation of higher order salts and salt cocrystals of trimesic acid using 2,4-diaminopyrimidine (pyrimethamine, trimethoprim) and pyridyl (4,4'-bipyridine, 1,2-di(4-pyridyl)ethylene, 1,3-di(4-pyridyl)propane, 4-phenylpyridine) coformers. We report the single crystal structures of five binary, eight ternary and three quaternary systems with the compositions AB, A2B, A3B, A2BC, A3BC, A2BC1.5, ABC1.5, A1 2A2B, ABC1C,2 A2BC1C2 0.5, and A1A2BC where A is a 2,4-diaminopyrimidine cation, B is the mono-, di- or trianion of trimesic acid and C is a pyridine. We also show that the ternary and quaternary salts and salt cocrystals can be prepared in bulk quantities by liquid-assisted grinding.

Theoretical insights of the pharmaceutical compound fluoxetine in water: Role in direct photolysis and indirect photolysis by free radicals

The frequent detection of pharmaceutical compounds in the environment has led to a growing awareness, which may pose a major threat to the aquatic environment. In this study, photodegradation (direct and indirect photolysis) of two different dissociation states of fluoxetine (FLU) was investigated in water, mainly including the determination of photolytic transition states and products, and the mechanisms of indirect photodegradation with ·OH, CO3*- and NO3*. The main direct photolysis pathways are defluorination and C-C bond cleavage. In addition, the indirect photodegradation of FLU in water is mainly through the reactions with ·OH and NO3*, and the photodegradation reaction with CO3*- is relatively difficult to occur in the water environment. Our results provide a theoretical basis for understanding the phototransformation process of FLU in the water environment and assessing its potential risk.

Red-emitting 4-methyl coumarin fused barbituric acid as an electrochemical sensor for catechol detection and probe for latent fingerprints

Herein, we have reported a red-emitting 4-methyl coumarin fused barbituric acid azo dye (4-MCBA) synthesized by conventional method. Density functional theory (DFT) studies of tautomer compounds were done using (B3LYP) with a basis set of 6-31G(d,p). NLO analysis has shown that tautomer has mean first-order hyperpolarisabilities (β) value of 1.8188 × 10-30 esu and 1.0470 × 10-30 esu for azo and hydrazone forms, respectively, which is approximately nine and five times greater than the magnitude of urea. 4-MCBA exhibited two absorption peaks in the range of 290-317 and 379-394 nm, and emission spectra were observed at 536 nm. CV study demonstrated that the modified 4-MCBA/MGC electrode exhibited excellent electrochemical sensitivity towards the detection of catechol and the detection limit is 9.39 μM under optimum conditions. The 4-MCBA employed as a fluorescent probe for the visualisation of LFPs on various surfaces exhibited Level-I to level-II LFPs, with low background interference.

A synthetic approach towards drug modification: 2-hydroxy-1-naphthaldehyde based imine-zwitterion preparation, single-crystal study, Hirshfeld surface analysis, and computational investigation

The current work is about the modification of primary amine functionalized drugs, pyrimethamine and 4-amino-N-(2,3-dihydrothiazol-2-yl)benzenesulfonamide, via condensation reaction with 2-hydroxy-1-naphthaldehyde to produce new organic zwitterionic compounds (E)-1-(((4-(N-(2,3-dihydrothiazol-2-yl)sulfamoyl)phenyl)iminio)methyl)naphthalen-2-olate (DSPIN) and (E)-1-(((4-amino-5-(4-chlorophenyl)-6-ethylpyrimidin-2-yl)iminio)methyl)naphthalen-2-olate (ACPIN) in methanol as a solvent. The crystal structures of both compounds were confirmed to be imine-based zwitterionic products via single-crystal X-ray diffraction (SC-XRD) analysis which indicated that the stabilization of both crystalline compounds is achieved via various noncovalent interactions. The supramolecular assembly in terms of noncovalent interactions was explored by the Hirshfeld surface analysis. Void analysis was carried out to predict the crystal mechanical response. Compound geometries calculated in the DFT (Density Functional Theory) study showed reasonably good agreement with the experimentally determined structural parameters. Frontier molecular orbital (FMO) analysis showed that the DSPIN HOMO/LUMO gap is by 0.15 eV smaller than the ACPIN HOMO/LUMO gap due to some destabilization of the DSPIN HOMO and some stabilization of its LUMO. The results of the charge analysis implied formation of intramolecular hydrogen bonds and suggested formation of intermolecular hydrogen bonding and dipole-dipole and dispersion interactions.

Possible NLO response and electrical/charge transfer capabilities of natural anthraquinones as p-type organic semiconductors: a DFT approach

CONTEXT

Organic semiconductors (OSCs) have attracted a great deal of interest in recent days. There are various types of OSCs, among which small molecules have various inherent benefits. Further research is needed to advance this new kind of material because the field is still developing, and the current focus is on creating small molecules that exist naturally for OSCs. OSCs with nonlinear optical (NLO) characteristics offer a significant advantage over others. Thus, this study theoretically investigates naturally occurring anthraquinones such as chrysophanol and rhein as potential OSCs, as well as their NLO properties. The calculated properties include the ionization potential (IP), electron affinity (EA), and bandgap (Eg). The FMO energy levels together with the Eg, IP (8.17-8.53 eV), and EA (1.87-2.44 eV) suggest the semiconductor nature of the studied compounds. The calculated values of reorganization energy (λ) and transfer integrals (V) suggest the p-type character of both molecules. Rhein has the lowest λh (0.19 eV) and Eg (3.28 eV) and the highest Vh, predominantly because of its better p-type character. The polarizability increases due to the presence of an electron-withdrawing substituent, leading to better NLO performance for Rhein, which is supported by its lower LUMO and Eg values.

METHODS

The studied molecules were optimized with the DFT/B3LYP-GD3/6-31+G(d,p) method using Gaussian 16 software. The crystal structure was simulated with Materials Studio 7.0, and the V values were calculated with the ADF package. The CDD and DOS plots were obtained with the Multiwfn 3.8 program.

Benzimidazolium quaternary ammonium salts: synthesis, single crystal and Hirshfeld surface exploration supported by theoretical analysis

Owing to the broad applications of quaternary ammonium salts (QAS), we present the synthesis of benzimidazolium-based analogues with variation in the alkyl and alkoxy group at N-1 and N-3 positions. All the compounds were characterized by spectroscopic techniques and found stable to air and moisture both in the solid and solution state. Moreover, molecular structures were established through single-crystal X-ray diffraction studies. The crystal packing of the compounds was stabilized by numerous intermolecular interactions explored by Hirshfeld surface analysis. The enrichment ratio was calculated for the pairs of chemical species to acquire the highest propensity to form contacts. Void analysis was carried out to check the mechanical response of the compounds. Furthermore, theoretical investigations were also performed to explore the optoelectronic properties of compounds. Natural population analysis (NPA) has been conducted to evaluate the distribution of charges on the synthesized compounds, whereas high band gaps of the synthesized compounds by frontier molecular orbital (FMO) analysis indicated their stability. Nonlinear optical (NLO) analysis revealed that the synthesized QAS demonstrates significantly improved NLO behaviour than the standard urea.

A quantum mechanical investigation of nanocone oxide as a drug carrier for zidovudine: AIDS drug

Traditionally, nanocones as a drug delivery material allow controlled drug delivery close to the target area while reducing the toxicity and generic accumulation associated with traditional intravenous injection methods. In the current study, density functional theory (DFT) is employed to investigate the therapeutic potential of carbon nanocone oxide (ONC) as a carrier with zidovudine drug for the treatment of human immunodeficiency virus (HIV). The electronic ground state and excited state were studied to evaluate the drug carrier potential of ONC and Zidovudine-ONC complex. The Frontier Molecular Orbitals (FMOs) and Molecular Electrostatic Potential (MEPs) revealed that the ONC carrier acts as a donor and zidovudine as an acceptor. The FMOs confirmed the interaction between drug and carrier stabilization energy by calculating chemical hardness, material softness, electronegativity, Ionization energy and electron affinity. The natural bond analysis (NBO), non-covalent interaction (NCI) and electron localization function (ELF) revealed the charge transfer between zidovudine and ONC. The density of state (DOS) and Charge Deposition analysis (CDA) provided the charge transfer. To study the excited state of zidovudine, transition density matrix (TDM), UV(Ultra-visible), IR (infrared), Raman, and NMR (Nuclear Magnetic Resonance) spectra of ONC and zidovudine-ONC complex have been plotted. The spectra showed a significant red shift in the zidovudine-ONC complex. Photoinduced electron studies (PET) showed fluorescence quenching because of the interaction between the drug and the carrier and provided a graphical explanation of the distinct excited state. All the results show that the ONC carrier has therapeutic potential as a zidovudine carrier for the treatment of Human Immunodeficiency Virus (HIV).

Linear and Nonlinear Optical Responses of Nitrobenzofurazan-Sulfide Derivatives: DFT-QTAIM Investigation on Twisted Intramolecular Charge Transfer

In this study, we report on the green fluorescence exhibited by nitrobenzofurazan-sulfide derivatives (NBD-Si, i = 1-4). The optical responses of these studied compounds in a polar methanol solvent were simulated by the use of time-dependent density functional theory (TD-DFT) employing the Becke-3-Parameter-Lee-Yang-Parr (B3LYP) functional along with the 6-31G(d,p) basis set. The computed energy and oscillator strength (f) results complement the experimental results. The band gap was calculated as the difference between the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO). Additionally, the density of states (DOS) was computed, providing a comprehensive understanding of the fundamental properties of these materials and further corroborating the experimental data. When the experimental data derived from ultraviolet/visible (UV/visible) and fluorescence spectroscopic techniques and those from simulated spectra are analyzed, the extracted values match up adequately. In addition, the NBD-sulfide compounds exhibit a large Stokes shift up to 85 nm in a polar methanol solvent. They are hypothesized to represent a novel paradigm of excited-state intramolecular charge transfer (ICT). To understand the intrinsic optical properties of NBD-Si materials, an ICT was identified, and its direction within the molecule was evaluated using the ratio of βvect and βtotal, values extracted from the computed nonlinear optical (NLO) properties. Moreover, the reduced density gradient (RDG)-based noncovalent interactions (NCIs) were employed to characterize the strength and type of NBD-Si interactions. Furthermore, noncovalent interactions were identified and categorized using the Quantum Theory of Atoms in Molecules (QTAIM) analysis. Ultimately, the combination of Hirshfeld surface analysis and DFT calculations was utilized to enhance the characterization and rationalization of these NCIs.

Theoretical Calculations Facilitating Catalysis for Advanced Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have emerged as one of the most hopeful alternatives for energy storage systems. However, the commercialization of Li-S batteries is still confronted with enormous hurdles. The poor conductivity of sulfur cathodes induces sluggish redox kinetics. The shuttling of polysulfides incurs the heavy failure of electroactive substances. Tremendous efforts in experiments to seek efficient catalysts have achieved significant success. Unfortunately, the understanding of the underlying catalytic mechanisms is not very detailed due to the complicated multistep conversion reactions in Li-S batteries. In this review, we aim to give valuable insights into the connection between the catalyst activities and the structures based on theoretical calculations, which will lead the catalyst design towards high-performance Li-S batteries. This review first introduces the current advances and issues of Li-S batteries. Then we discuss the electronic structure calculations of catalysts. Besides, the relevant calculations of binding energies and Gibbs free energies are presented. Moreover, we discuss lithium-ion diffusion energy barriers and Li2S decomposition energy barriers. Finally, a Conclusions and Outlook section is provided in this review. It is found that calculations facilitate the understanding of the catalytic conversion mechanisms of sulfur species, accelerating the development of advanced catalysts for Li-S batteries.

Preparation, Crystal Structure, Supramolecular Assembly, and DFT Studies of Two Organic Salts Bearing Pyridine and Pyrimidine

The effective preparation of two new pyrimidine- and pyridine-based organic crystalline salts with substituted acidic moieties (i.e., (Z)-4-(naphthalen-2-ylamino)-4-oxobut-2-enoic acid (DCNO) and 2-hydroxy-3,5-dinitrobenzoic acid (PCNP)) using methanol as a solvent has been reported. These molecular salts have ionic interactions that are responsible for their structural stabilization in their solid-state assemblies. The crystal structures of DCNO and PCNP were determined by the single-crystal X-ray diffraction (SCXRD) technique. The SCXRD study inferred that cations and anions are strongly packed due to N-H···O, N-H···N, and C-H···O noncovalent interactions in DCNO, whereas in PCNP, N-H···N noncovalent interactions are absent. The noncovalent interactions in both organic crystalline salts were comprehensively investigated by Hirshfeld surface analysis. Further, a detailed density functional theory (DFT) study of both compounds was performed. The optimized structures of both compounds supported the existence of the H-bonding and weak dispersion interactions in the synthesized organic crystalline salt structures. Both compounds were shown to have large and noticeably different HOMO/LUMO energy gaps. The atomic charge analysis results supported the SCXRD and HSA results, showing the formation of intermolecular noncovalent interactions in both organic crystalline salts. The results of the natural bond orbital (NBO) analysis confirmed the existence of (relatively weak) noncovalent interactions between the cation and anion moieties of their organic crystalline salts. The global reactivity parameters (GRPs) analysis showed that both organic crystalline salts' compounds should be quite thermodynamically stable and that DCNO should be less reactive than PCNP. For both compounds, the molecular electrostatic potential (MEP) analysis results support the existence of intermolecular electrostatic interactions in their organic crystalline salts.

Synthesis, Structural, and Intriguing Electronic Properties of Symmetrical Bis-Aryl-α,β-Unsaturated Ketone Derivatives

Three symmetrical bis-aryl-α,β-unsaturated ketone derivatives, 2,6-di((E)-benzylidene)-cyclohexan-1-one (DBC), 2,6-bis((E)-4-chlorobenzylidene)cyclohexan-1-one (BCC), and (1E,1'E,4E,4'E)-5,5'-(1,4-phenylene)bis(2-methyl-1-phenylpenta-1,4-dien-3-one) (PBMP), have been prepared using the aldol condensation approach toward ketones having two enolizable sites. The structures of DBC, BCC, and PBMP have been resolved via spectrometric methods. Moreover, the crystal structure of PBMP is determined by the single-crystal X-ray diffraction (SC-XRD) technique, which revealed that the PBMP molecular assembly is stabilized by the intermolecular C-H···O bonding and C-O···π and weak T-shaped offset π···π stacking interactions. The Hirshfeld surface analysis (HSA) of the PBMP crystal structure was performed as well, and the results were compared with the results of DBC and BCC. The density functional theory (DFT) study results revealed that the longer conjugated molecule of PBMP has smaller but still quite significant HOMO-LUMO gaps compared to the smaller molecules of BCC and DBC. The natural population analysis (NPA) and natural bonding orbital (NBO) analysis were performed. Accordingly, the hydrogen bonding and dipole-dipole interactions stabilize the crystal structures of these compounds. Additionally, the NBO analysis showed numerous high-energy stabilizing interactions for the PBMP compound due to the presence of numerous delocalized and relatively easily polarizable π-electrons, thus implying its significant thermodynamic stability. According to the global reactivity parameter (GRP) analysis, the compounds BCC and DBC are relatively stable in redox processes and have high thermodynamic stability and relatively lower reactivity in general. The molecular electrostatic potential (MEP) analysis results imply potential formation of the intermolecular hydrogen bonding and dispersion interactions, which stabilizes the crystal structures of these compounds.

Theoretical design of D-π-A system new dyes candidate for DSSC application

Currently, dye-sensitized solar cells (DSSCs) are one of the energy technologies that has piqued the interest of researchers, due to their distinct characteristics such as excellent air stability, ease of synthesis and photovoltaic properties interesting. This work aims to study the optoelectronic properties and photovoltaic of six organic dyes based on phenothiazine (PTZ). The effects of bridging core modifications of recently synthesized PSB-4(R) molecule on structural, photovoltaic, electronic, and optical properties of D1-D6 are studied. Using the method Density Functional Theory (DFT) level of the B3LYP (Becke three-parameter Lee-Yang-Parr) exchange correlation functional with 6-31G (d, p) and time-dependent DFT (TD-DFT). According to the obtained results, optoelectronic properties and photovoltaic of the dyes, we can suggest that these designed molecules are better sensitizers as a candidate for the production of dye solar cells (DSSCs). This theoretical study paves the way for chemists to synthesize more efficient sensitizers for applications in dye solar cells.

Key Electronic, Linear and Nonlinear Optical Properties of Designed Disubstituted Quinoline with Carbazole Compounds

Organic materials development, especially in terms of nonlinear optical (NLO) performance, has become progressively more significant owing to their rising and promising applications in potential photonic devices. Organic moieties such as carbazole and quinoline play a vital role in charge transfer applications in optoelectronics. This study reports and characterizes the donor-acceptor-donor-π-acceptor (D-A-D-π-A) configured novel designed compounds, namely, Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1. We further analyze the structure-property relationship between the quinoline-carbazole compounds for which density functional theory (DFT) and time-dependent DFT (TDDFT) calculations were performed at the B3LYP/6-311G(d,p) level to obtain the optimized geometries, natural bonding orbital (NBO), NLO analysis, electronic properties, and absorption spectra of all mentioned compounds. The computed values of λmax, 364, 360, and 361 nm for Q3, Q4, and Q5 show good agreement of their experimental values: 349, 347, and 323 nm, respectively. The designed compounds (Q3D1-Q5D1) exhibited a smaller energy gap with a maximum redshift than the reference molecules (Q3-Q5), which govern their promising NLO behavior. The NBO evaluation revealed that the extended hyperconjugation stabilizes these systems and caused a promising NLO response. The dipole polarizabilities and hyperpolarizability (β) values of Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1 exceed those of the reference Q3, Q4, and Q5 molecules. These data suggest that the NLO active compounds, Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1, may find their place in future hi-tech optical devices.

Molecular Modeling Studies on 2,4-Disubstituted Imidazopyridines as Anti-Malarials: Atom-Based 3D-QSAR, Molecular Docking, Virtual Screening, In-Silico ADMET and Theoretical Analysis

Malarial parasites have been reported for moderate-high resistance towards classical antimalarial agents and henceforth development of newer novel chemical entities targeting multiple targets rather than targeting single target will be a highly promising strategy in antimalarial drug discovery. Herein, we carried out molecular modeling studies on 2,4-disubstituted imidazopyridines as anti-hemozoin formation inhibitors by using Schrödinger’s molecular modeling package (2020_4). We have developed statistically robust atom-based 3D-QSAR model (training set, [Formula: see text]; test set, [Formula: see text]; [Formula: see text] [Formula: see text]; root-mean-square error, [Formula: see text]; standard deviation, [Formula: see text]). Our molecular docking, in-silico ADMET analysis showed that dataset molecule 37, has highly promising results. Our ligand-based virtual screening resulted in top five ZINC hits, among them ZINC73737443 hit was observed with lesser energy gap, i.e. 7.85[Formula: see text]eV, higher softness value (0.127[Formula: see text]eV), and comparatively good docking score of [Formula: see text]10.2[Formula: see text]kcal/mol. Our in-silico analysis for a proposed hit, ZINC73737443 showed that this molecule has good ADMET, in-silico nonames toxic as well as noncarcinogenic profile. We believe that further experimental as well as the in-vitro investigation will throw more lights on the identification of ZINC73737443 as a potential antimalarial agent.

Efficient Synthesis, SC-XRD, and Theoretical Studies of O-Benzenesulfonylated Pyrimidines: Role of Noncovalent Interaction Influence in Their Supramolecular Network

Crystalline organic compounds, 2-amino-6-methylpyrimidin-4-yl benzenesulfonate (AMPBS) and 2,6-diaminopyrimidin-4-yl benzenesulfonate (DAPBS), were prepared via O-benzenesulfonylation of 2-amino-6-methylpyrimidin-4-ol 1 and 2,6-diaminopyrimidin-4-ol 2, respectively. The structural interpretations were achieved unambiguously by single-crystal X-ray diffraction (SC-XRD) analysis. The Hirshfeld surface study showed that C-H···O, N-H···N, and especially C-H···C hydrogen bond interactions are the key contributors to the intermolecular stabilization in the crystal. Density functional theory (DFT) studies were used to obtain a better understanding of natural bond orbitals (NBOs) and nonlinear optical (NLO) analysis for AMPBS and DAPBS at the B3LYP/6-311G(d,p) level. The time-dependent density functional theory (TD-DFT)/CAM-B3LYP/6-311G(d,p) level was employed for frontier molecular orbital analysis of both compounds. DFT-based vibrations for C-H, C=N, N-H, and stretching for C-C were found to be in good agreement with the experimental data. Overall, the theoretical findings were acquired in correspondence to the SC-XRD-based parameters. Intracharge transfer occurred in AMPBS and DAPBS compounds, which was evaluated through FMO activity. Global reactivity indices had been acquired utilizing energies of HOMO-LUMO orbitals. Overall, the theoretical findings related to AMPBS and DAPBS consist of promising correspondence to experimental findings. The theoretical-based study also exhibited that both AMPBS and DAPBS compounds contain promising NLO features.

Exploration of Noncovalent Interactions, Chemical Reactivity, and Nonlinear Optical Properties of Piperidone Derivatives: A Concise Theoretical Approach

The organic compounds with a π-bond system lead to electric charge delocalization which enables them to reveal fascinating nonlinear optical properties. Mono-carbonyl curcuminoids also have an appealing skeleton from the conjugation view point. Interesting chemical structures of the 3,5-bis(arylidene)-N-benzenesulfonyl-4-piperidone derivatives motivated us to perform density functional theory (DFT)-based studies. Therefore, computations using the B3LYP/6-311G(d,p) functional of DFT were executed to explore geometric parameters, highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energies, and natural bond orbital (NBO) analyses. Moreover, three different functionals such as HF, B3LYP, and M06 with the 6-311G(d,p) basis set were used to investigate the average polarizability ⟨α⟩ and first hyperpolarizability (β_tot)-based properties of all compounds. A good concurrence among calculated and experimental parameters was obtained through root mean square error calculations. The molecular stability of piperidone derivatives was examined using the Hirshfeld surface and NBO analyses. Natural population analysis was also performed to obtain insights about atomic charges. Calculated HOMO-LUMO energies showed that charge transfer interactions take place within the molecules. Moreover, global reactivity parameters including electronegativity, chemical hardness, softness, ionization potential, and electrophilicity were calculated using the HOMO and LUMO energies. The average polarizability ⟨α⟩ and first hyperpolarizability (β_tot) values of all compounds were observed to be larger in magnitude at the aforesaid functional than the standard compound.

A facile microwave assisted synthesis and structure elucidation of (3R)-3-alkyl-4,1-benzoxazepine-2,5-diones by crystallographic, spectroscopic and DFT studies

The use of microwave (MW) irradiation in organic synthesis has become increasingly popular within the pharmaceutical and academic arenas because it is a new enabling technology for drug discovery and development. It is a rapid way of synthesis, which involves faster reaction rates and high selectivity to conventional heating method of syntheses. The MW-assisted 7-exo-tet cyclization of N-acylanthranilic acids afforded (3R)-3-alkyl-4,1-benzoxazepines-2,5-diones in very short duration (20 min) with extraordinary high yields in comparison to conventional heating mode of synthesis. The method development, comparative yields of MW-assisted and thermal method of syntheses, crystallographic, spectroscopic and density functional theory (DFT) studies are reported herein. Four novel compounds with chemical formulas C₁₀H₉BrClNO₃5m, C₁₉H₁₉NO₃6e, C₁₃H₁₄ClNO₃6h and C₁₂H₁₁Br₂NO₃6h were synthesized, validated by ¹HNMR, ¹³CNMR, FT-IR, UVVis, EIMS spectroscopic techniques and confirmed by using single crystal X-ray diffraction (SC-XRD) study. The DFT and TDDFT calculations at B3LYP/6-311 + G(d,p) level of theory were performed for comparative analysis of spectroscopic data, optimized geometries, frontier molecular orbitals (FMOs), natural bond orbital (NBO) analysis and nonlinear optical (NLO) properties of 5m, 6e, 6h and 6o. Overall, experimental findings were supported nicely by corresponding DFT computed results. The NBO analysis confirmed that the presence of non-covalent interactions, hydrogen bonding and hyper- conjugative interactions are pivotal cause for the existence of 5m, 6e, 6h and 6o in the solid-state. NLO analysis showed that 5m, 6e, 6h and 6o have significant NLO properties as compared to prototype standard compound which disclosed their potential for technology related applications.