Catalytic degradation of organic dyes using green synthesized Fe3O4-cellulose-copper nanocomposites

Green synthesis of nanocellulose supported cu-bionanocomposites and their profound applicability in the synthesis of amide derivatives and controlling of food-borne pathogens

Copper bionanocomposites (CBNCS) were synthesized using Ipomoea carnea- sourced nanocellulose as support via an eco-friendly and cost-effective method. X-ray Diffractometer (XRD) pattern of CBNCS confirmed the octahedral structure of Cu2O, the face-centered cubic (FCC) crystal structure of Cu(0). XRD also revealed the crystal lattice of cellulose II. Surface Electron Microscope (SEM) and Transmission Electron Microscope (TEM) revealed the uniform distribution of copper nanoparticles (Cu NPs) with an average size of 10 nm due to the presence of nanocellulose. X-ray photoelectron spectroscopy (XPS) provided information about the electronic, chemical state and elemental composition of CBNCS. Thermogravimetric Analysis (TGA) showed the thermal stability of CBNCS. CBNCS catalyzed the rearrangement of oximes to primary amides in a very mild condition with a high yield of up to 92 %. CBNCS effectively inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with lower minimum inhibitory concentration MIC values. Antioxidant activity and electrical conductivity of CBNCS were also determined.

Assessment of heavy metal accumulation and health risk in three essential edible weeds grown on wastewater irrigated soil

The main problem facing Egypt recently is the shortage of available water resources. Therefore, farmers resort to use wastewater for irrigation. So, the present work aims to assess the impacts of wastewater irrigation on the productivity of three edible weeds (Cichorium endivia, Sonchus oleraceous and Beta vulgaris) and its effect on the nutritional value of plants and its risk on human health. This study will focus on Shibin Al Kanater region, and the physicochemical characteristics of drainage water, canal water, drainage water-irrigated soils and canal-irrigated soils were estimated. The vegetative and traits of edible weeds were determined including their photosynthetic pigments, organic and inorganic nutrients content, and heavy metals content. The health risk index (HRI) associated with consumption of polluted plants was created using the estimated exposure factor of a crop to the oral reference dosage of the toxic metal. The main results showed that biomass productivity of S. oleraceous, B. vulgaris and C. endivia increased due to drainage water irrigation with increasing percentage as 27.9, 19.6, and 19.1%, respectively. Irrigation with drainage water significantly increased the photosynthetic pigments of edible weeds. Irrigation with drainage water increased carbohydrate content, crude protein, total soluble sugar, and gross energy in all studied weeds. C. endivia, S. oleraceus and B. vulgaris plants irrigated with canal and drainage water could accumulate Fe, Zn, Cu, and Co in their roots. C. endivia, S. oleraceus and B. vulgaris plants irrigated with canal water indicated HRI more than the unit for Mn, Cu, Pb, and Cd. This research advises that regulation be put in place to prohibit irrigation using untreated drainage and to restrict the discharge of industrial, domestic, and agricultural wastewater into irrigation canals.

Synthesis and evaluation of the antioxidant activity of new spiro-1,2,4-triazine derivatives applying Ag/Fe3O4/CdO@MWCNT MNCs as efficient organometallic nanocatalysts

We applied the Petasites hybridus rhizome water extract as green media so that Ag/Fe₃O₄/CdO@ multi-walled carbon nanotubes magnetic nanocomposites (Ag/Fe₃O₄/CdO@MWCNTs MNCs) could be prepared. We also evaluated its activity by using in the one-pot multicomponent reaction of acetophenones, diethyl oxalate, ammonium acetate, and activated carbonyl compounds such as ninhydrin, isatin and acenaphthylene-1,2-dione, and malononitrile and hydrazoyl chlorides in an aqueous medium at room temperature for the generation of spiro-1,2,4-triazines as new derivatives with tremendous output. Moreover, reducing organic pollutants from 4-nitrophenol (4-NP) was carried out by generating Ag/Fe₃O₄/CdO@MWCNTs in water at room temperature. The results displayed that Ag/Fe₃O₄/CdO@MWCNTs reduced pollutants of organic compounds in a short time. The synthesized spiro-1,2,4-triazines have NH and OH functional groups having acidic hydrogen with high antioxidant power. Also, the spiro-1,2,4-triazines exhibited antimicrobial ability. For this purpose, the disk diffusion method was applied and two kinds of bacteria, Gram-positive and Gram-negative, were employed for the analysis. Furthermore, we applied functional theory-based quantum chemical methods in order to better understand reaction mechanism density. To generate spiro-1,2,4-triazines, the applied process showed many properties such as reactions with short time, products with good yields, and simple extraction of catalyst from a mixture of reactions.

Six-component synthesis and biological activity of novel spiropyridoindolepyrrolidine derivatives: A combined experimental and theoretical investigation

Petasites hybridus rhizome water extract was used as green media for the preparation of Ag/Fe₃O₄/CdO@multi-walled carbon nanotubes magnetic nanocomposites (Ag/Fe₃O₄/CdO@MWCNTs MNCs), and its activity was evaluated by using in the one-pot multicomponent reaction of isatins, acetyl chloride, secondary amines, vinilidene Meldrum’s acid, primary amines, and malononitrile in an aqueous medium at room temperature for the generation of spiropyridoindolepyrrolidine as new derivatives with tremendous output. In addition, organic pollutant reduction of 4-nitrophenol (4-NP) was carried out by generated Ag/Fe₃O₄/CdO@MWCNTs in water at room temperature. The results displayed that Ag/Fe₃O₄/CdO@MWCNTs were reduced as pollutants of organic compounds in a short time. The synthesized spiropyridoindolepyrrolidine has an NH₂ functional group that has acidic hydrogen and shows high antioxidant ability. Also, the spiropyridoindolepyrrolidine exhibited antimicrobial ability, and the method that is used for this purpose is the disk diffusion method, and two kinds of bacteria, Gram-positive and Gram-negative, were employed for this analysis. Also, to better understand the reaction mechanism density, functional theory-based quantum chemical methods have been applied. For the generation of spiropyridoindolepyrrolidine, the used process has many properties such as reactions with short time, product with good yields, and simple extraction of catalyst from the mixture of reaction.

Fabrication of Copper(II)-Coated Magnetic Core-Shell Nanoparticles Fe3O4@SiO2: An Effective and Recoverable Catalyst for Reduction/Degradation of Environmental Pollutants

In this work, we report the synthesis of a magnetically recoverable catalyst through immobilizing copper (II) over the Fe3O4@SiO2 nanoparticles (NPs) surface [Fe3O4@SiO2-L–Cu(II)] (L = pyridine-4-carbaldehyde thiosemicarbazide). Accordingly, synthesized catalysts were determined and characterized by energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), field emission scanning electron microscopy (FESEM), and thermogravimetric-differential thermal analysis (TG-DTA) procedures. The [Fe3O4@SiO2-L–Cu(II)] was used for the reduction of Cr(VI), 4-nitrophenol (4-NP) and organic dyes such as Congo Red (CR) and methylene blue (MB) in aqueous media. Catalytic performance studies showed that the [Fe3O4@SiO2–L–Cu(II)] has excellent activity toward reduction reactions under mild conditions. Remarkable attributes of this method are high efficiency, removal of a homogeneous catalyst, easy recovery from the reaction mixture, and uncomplicated route. The amount of activity in this catalytic system was almost constant after several stages of recovery and reuse. The results show that the catalyst was easily separated and retained 83% of its efficiency after five cycles without considerable loss of activity and stability.

Green novel multicomponent synthesis and biological evaluation of new oxazolopyrazoloazepines and reduction of nitrophenols in the presence of Ag/Fe3O4/ZnO@MWCNT MNCs

In this research, new derivatives of oxazolopyrazoloazepines were synthesized in high yields using multicomponent reaction of anilines, oxalylchloride, alkyl bromides, activated acetylenic compounds, hydrazine and ethyl bromopyruvate in the presence of Ag/Fe₃O₄/ZnO@MWCNT magnetic nanocomposite (MNCs) as a high-performance magnetic catalyst in ionic liquid at room temperature. The Ag/Fe₃O₄/ZnO@MWCNT magnetic nanocomposites (MNCs) were synthesized using 1-octhyl-3-methyl imidazolium bromide ([OMIM]Br) as a stabilizer and soft template. Also, the catalytic activity of the Ag/Fe₃O₄/ZnO@MWCNT MNCs was evaluated in reduction of organic pollutants such as 4-nitrophenol (4-NP) in water at mild conditions. The results indicated that the biosynthesized nanocomposites (NCs) have high catalytic activity for organic pollutants within few seconds. Because of having benzazepine nucleus in the synthesized compounds, we investigate antioxidant property of some synthesized oxazolopyrazoloazepines by diphenyl-picrylhydrazine radical trapping and power of ferric reduction experiment. Short time of reaction, high yields of product, easy separation of catalyst and products are some advantages of this procedure.

Biowaste- and nature-derived (nano)materials: Biosynthesis, stability and environmental applications

Due to the environmental pollution issues and the supply of drinking/clean water, removal of both inorganic and organic (particularly dyes, nitroarenes, and heavy metals) to non-dangerous products and useful compounds are very important transformations. The deployment of sustainable and eco-friendly nanomaterials with exceptional structural and unique features such as high efficiency and stability/recyclability, high surface/volume ratio, low-cost production routes has become a priority; nonetheless, numerous significant challenges/restrictions still remained unresolved. The immobilization of green synthesized metal nanoparticles (NPs) on the natural materials and biowaste generated templates have been analyzed widely as a greener approach due to their environmentally friendly preparation methods, earth-abundance, cost-effectiveness with low energy consumption, biocompatibility, as well as adjustability in various cases of biomolecules as bioreducing agents. Natural and biowaste materials are widely considered as important sources to fabricate greener and biosynthesized types of metal, metal oxide, and metal sulfide nanomaterials using plant extracts. Integrating green synthesized nanoparticles with various biotemplates offers new practical composites for mitigating environmental challenges. In this review, degradation of dyes, reduction of toxic nitrophenols, absorption of heavy metals, and other hazardous/toxic environmental pollutants from contaminated water bodies using biowaste- and nature-derived nanomaterials are highlighted.

Architecture engineering of nanostructured catalyst via layer-by-layer adornment of multiple nanocatalysts on silica nanorod arrays for hydrogenation of nitroarenes

Direct consideration for both, the catalytically active species and the host materials provides highly efficient strategies for the architecture design of nanostructured catalysts. The conventional wet chemical methods have limitations in achieving such unique layer-by-layer design possessing one body framework with many catalyst parts. Herein, an innovative physical method is presented that allows the well-regulated architecture design for an array of functional nanocatalysts as exemplified by layer-by-layer adornment of Pd nanoparticles (NPs) on the highly arrayed silica nanorods. This spatially confined catalyst exhibits excellent efficiency for the hydrogenation of nitroarenes and widely deployed Suzuki cross-coupling reactions; their facile separation from the reaction mixtures is easily accomplished due to the monolithic structure. The generality of this method for the introduction of other metal source has also been demonstrated with Au NPs. This pioneering effort highlights the feasibility of physically controlled architecture design of nanostructured catalysts which may stimulate further studies in the general domain of the heterogeneous catalytic transformations.

Employing of Fe3O4/CuO/ZnO@MWCNT MNCs in the solvent-free synthesis of new cyanopyrroloazepine derivatives and investigation of biological activity

In this research, we synthesized the Fe₃O₄/CuO/ZnO@MWCNT magnetic nanocomposites using water extract of Petasites hybridus rhizome, and the high performance of synthesized catalyst was confirmed by using in the solvent-free multicomponent reactions of isatoic anhydride, N-methylimidazole, alkyl bromides, activated acetylenic compounds and 2-aminoacetonitrile at ambient temperature for the production of new cyanopyrroloazepine derivatives in high yields. This catalyst could be used several times in these reactions and have main role in the yield of product. The synthesized cyanopyrroloazepines have NH groups in their structure and for this reason have good antioxidant activity. Also, employing Gram-positive and Gram-negative bacteria in the disk diffusion procedure confirmed some cyanopyrroloazepines antimicrobial effect. The results showed that synthesized cyanopyrroloazepine prevented the bacterial growth. This used process for preparation of new cyanopyrroloazepine has some improvements such as low reaction time, product with high yields, simple separation of catalyst and products.

Co-MOF-74 based Co3O4/cellulose derivative membrane as dual-functional catalyst for colorimetric detection and degradation of phenol

Smart nanomaterials that can simultaneously detect and eliminate contaminants in water environment are significant for health protection. To achieve such goal, Co-MOF-74 was in-situ assembled on regenerated cellulose membranes followed by calcination process, thus achieving dual-functional Co₃O₄/cellulose derivative membrane (Co₃O₄/CDM) catalyst. The Co₃O₄ morphology was readily controlled by further recrystallization of the deposited MOF precursor. Combining the high enrichment ability of cellulose membrane and outstanding peroxidase-active of Co₃O₄, the fast color reaction for phenol was accomplished within 10 min by Co₃O₄/CDM with the assistance of H₂O₂ and 4-aminoantipyrine (4-AAP). Moreover, the Co₃O₄/CDM also portrayed an excellent degradation property for phenol elimination via sulfate radical-advanced oxidation processes (SR-AOPs). The degradation efficiency of phenol reached 93% in 20 min, and the possible mineralization mechanism was proposed based on the XPS and LC-MS analysis. Thus, Co-MOF-74 derived Co₃O₄/CDM shows excellent properties in aiding the colorimetric detection and degradation of phenol in aqueous solutions.

Extended Release of Metronidazole Drug Using Chitosan/Graphene Oxide Bionanocomposite Beads as the Drug Carrier

This study depicts the facile approach for the synthesis of chitosan/graphene oxide bionanocomposite (Chi/GO) beads via the gelation process. This is the first-ever study in which these Chi/GO beads have been utilized as a drug carrier for the oral drug delivery of metronidazole (MTD) drug, and investigations were made regarding the release pattern of the MTD drug using these Chi/GO beads as a drug carrier for a prolonged period of 84 h. The MTD is loaded on the surface as well as the cavity of the Chi/GO beads to result in MTD-Chi/GO bionanocomposite beads. The MTD drug loading was found to be 683 mg/g. Furthermore, the in vitro release patterns of pure drug and the drug encapsulated with Chi/GO beads are explored in simulated gastric as well as simulated intestinal fluids with phosphate-buffered saline (PBS) of pH 1.2 and 7.4, respectively. As-synthesized bionanocomposite beads have shown excellent stability and capacity for extended release of the MTD drug as compared to the pure drug in terms of bioavailability in both media. The cumulative release data are fitted with the Korsmeyer-Peppas kinetics and first-order reaction kinetics at pH 1.2 and 7.4. The synthesized bionanocomposite beads have good potential to minimize the multiple-dose frequency with the sustained drug release property and can reduce the side effects due to the drug.

Ionic liquid as an effective green media for the synthesis of (5Z, 8Z)-7H-pyrido[2,3-d]azepine derivatives and recycable Fe3O4/TiO2/multi-wall cabon nanotubes magnetic nanocomposites as high performance organometallic nanocatalyst

In this research we investigated the preparation of new (5Z, 8Z)-7H-pyrido[2,3-d]azepine derivatives in high yields via multicomponent reaction of isatins, alkyl bromides, activated acetylenic compounds and ammonium acetate using ionic liquid 1-octhyl-3-methyl imidazolium bromide ([OMIM]Br) as a stabilizer and soft template at room temperature in the presence of Fe₃O₄/TiO₂/Carbon nanotubes magnetic nanocomposites as a reusable and effective nanocatalyst that are synthesized using ionic liquid [OMIM]Br as a stabilizer, soft template, green media and moderate base. Because of having a NH group in the synthesized pyridine derivatives, we investigate antioxidant property of some synthesized compounds by diphenyl-picrylhydrazine (DPPH) radical trapping and power of ferric reduction experiment. Short time of reaction, high yields of product, easy separation of catalyst and products are some advantages of this procedure.

A Survey on Analytical Methods for the Characterization of Green Synthesized Nanomaterials

Nowadays, nanotechnologies are well established and the uses of a great variety of nanomaterials show exponential growth. The development of green synthesis procedures experienced a great development thanks to the contribution of researchers of diverse origins. The versatility of green chemistry allows producing a wide range of organic and inorganic nanomaterials with numerous promising applications. In all cases, it is of paramount importance to carefully characterize the resulting nanomaterials because their properties will determine their correct performance to accomplish the function to which they were synthesized or even their detrimental effects like nanotoxicological behavior. This review provides an overview of frequently employed characterization methods and their applications for green synthesized nanomaterials. However, while several different nanoscale materials and their associated green construction methodology are being developed, other important techniques would be extensively incorporated into this field soon. The aim is to encourage researchers in the field to employ a variety of these techniques for achieving an exhaustive characterization of new nanomaterials and for contributing to the development of validated green synthesis procedures.