A novel nanohybrid based on metal–organic framework MIL101−Cr/PANI/Ag for the adsorption of cationic methylene blue dye from aqueous solution

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Alkaline etched hydrochar-based magnetic adsorbents produced from pharmaceutical industry waste for organic dye removal

A large amount of pharmaceutical industry waste (PIW) was inevitably produced every year, and the PIW can be degraded by high temperature reaction to form porous structures. The study proposed an innovative pathway to valorize PIW with hydrothermal carbonization (HTC) coupled with alkali etching (AE). Without adding any additives, magnetic hydrochar could be generated with rough surface topography and suitable specific surface area (S_BET) by this method. Effects of HTC conditions and alkaline solution concentrations on the physicochemical and adsorption properties of PIW were investigated, and adsorption mechanism was explored. Based on evaluations of the magnetism, cyclic regeneration, and heavy metal leaching properties of the products, the feasibility of preparing magnetic adsorbents with solid waste by HTC coupled AE was established. The alkaline etching pharmaceutical industry waste (AEPIW) hydrochar showed the highest S_BET (54.64 m²/g) after the PIW was treated by 260 °C for 2 h plus 1 mol/L KOH. The removal rate of methylene blue (MB) could exceed 90% and the saturated magnetization was ~8 emu/g. The proposed new method was able to convert the low-value solid industrial waste into high-performance hydrochar-based magnetic adsorbents, which was tested to have a capability to efficiently and sustainably remove organic pollutants from water.

Preparation of benzenesulfonyl hydrazone modified guar gum and its adsorption properties for dyes and phytotoxicity assays

Herein, a novel environmentally friendly benzenesulfonyl hydrazone modified guar gum (DGH) that carries excellent adsorption performance towards dyes was facilely prepared through oxidation and condensation. The structure, morphology, and physics-chemical of DGH were fully characterized by multiple analysis techniques. The as-prepared adsorbent yielded highly efficient separating performance towards multiple anionic and cation dyes, including CR, MG, and ST with the maximum adsorption capacity of 1065.3839 ± 10.5695, 1256.4467 ± 2.9425, and 1043.8140 ± 0.9789 mg/g at 298.15 K, respectively. The adsorption process well fitted the Langmuir isotherm models and the pseudo-second-order kinetic models. The adsorption thermodynamics revealed that the adsorption of dyes onto DGH was spontaneous and endothermic. The adsorption mechanism indicated that the hydrogen bonding and electrostatic interaction participated in the fast and efficient removal of dyes. Furthermore, the removal efficiency of DGH still remained above 90 % after six adsorption-desorption cycles, and the presence of Na⁺, Ca²⁺, and Mg²⁺ have weakly impacted the removal efficiency of DGH. The phytotoxicity assay was conducted via the germination of mung bean seeds, which confirmed the adsorbent can effectivity decreased the toxicity of dyes. Overall, the modified gum-based multifunctional material has good promising applications for wastewater treatment.

Metal-Organic Framework-Based Materials for Wastewater Treatment: Superior Adsorbent Materials for the Removal of Hazardous Pollutants

In previous years, different pollutants, for example, organic dyes, antibiotics, heavy metals, pharmaceuticals, and agricultural pollutants, have been of note to the water enterprise due to their insufficient reduction during standard water and wastewater processing methods. MOFs have been found to have potential toward wastewater management. This Review focused on the synthesis process (such as traditional, electrochemical, microwave, sonochemical, mechanochemical, and continuous-flow spray-drying method) of MOF materials. Moreover, the properties of the MOF materials have been discussed in detail. Further, MOF materials' applications for wastewater treatment (such as the removal of antibiotics, organic dyes, heavy metal ions, and agricultural waste) have been discussed. Additionally, we have compared the performances of some typical MOFs-based materials with those of other commonly used materials. Finally, the study's current challenges, future prospects, and outlook have been highlighted.

Synthesis of novel PANI/PVA-NiCu composite material for efficient removal of organic dyes

The present work aims the synthesis of a novel, low cost, and environmentally friendly PANI/PVA-CuNi composite by chemical oxidative polymerization of aniline monomer and polyvinyl alcohol (PVA) as film matrix; several percentages of copper (Cu) and Nickel (Ni) were used. UV-Visible spectroscopy, FTIR, SEM-EDX, and TGA were used to characterize the nanocomposites. While PANI/PVA-CuNi nanocomposites were investigated in adsorption experiments of methylene blue (MB) under different controlled conditions (time reaction, adsorbent dosage, initial dye concentration, stirring speed, temperature, and pH of the medium) also various kinetic models were employed to evaluate the efficiency of the adsorption. The results revealed that the10 mg of PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni composites Catalyst removed (94% and 93% of methylene blue in 180 min respectively at 10^-5 M initial concentration of dye, pH of 13, stirring speed of 150 rpm, the temperature of 301 k. the kinetics data were properly fitted with the pseudo second-order model with a correlation coefficient of 0.98262 and 0.95881 using PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni, respectively.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

Surface modification of spent coffee grounds using phosphoric acid for enhancement of methylene blue adsorption from aqueous solution

In this study, the surface of the spent coffee grounds (SCG) was activated using phosphoric acid to increase the removal efficiency of methylene blue (MB) in aqueous solution, which is one of the harmful substances emitted in industrial processes. According to Fourier transform infra-red analysis, after phosphorylation of the SCG (PSCG), P = O group, P-O-C (aromatic) bond, P = OOH and P-O-P were newly introduced on the surface of the adsorbent, and the peaks of carboxyl groups and OH-group were large and broad. In addition, the surface area and mesopore range of the PSCG adsorbent were increased, and the structure changed, which enabled easy adsorption of MB. The process of adsorbing MB from aqueous solution using PSCG was more suitable for the pseudo-second order and Langmuir models, and the adsorption process was closer to chemisorption than physical adsorption. The maximum adsorption capacity of PSCG was 188.68 mg/g. As a result of the reuse test, PSCG showed excellent performance with a high removal efficiency of 90% up to four consecutive uses. PSCG modified with phosphoric acid, an abundant lignocellulose-based biosorbent that is readily available everywhere, is a promising adsorbent capable of adsorbing MB in aqueous solution.

Application of Activated Carbon Adsorbents Prepared from Prickly Pear Fruit Seeds and a Conductive Polymer Matrix to Remove Congo Red from Aqueous Solutions

The present work was aimed to evaluate the adsorption properties of activated carbons based on prickly pear seeds (PPS) and conductive polymer matrix based on polyaniline (PANI) for the removal of anionic Congo red (CR) dye from aqueous solutions. The adsorbent was prepared by polymerization of aniline in the presence of activated PPS by phosphoric acid and sodium hydroxide. The samples were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and the Brunauer–Emmett–Teller (BET) methods. The adsorption kinetics were studied using UV-visible (UV/Vis) spectroscopy. The characterization data suggest that the adsorption of the Congo red dye is enhanced because PANI chain molecules, which are especially accountable for removal through π–π interaction and H–bonding with the CR, are adsorbed/tethered onto the acid-activated PPS (PPSH), and thus surmount the mass transfer limitation by being best exposed to the CR-adsorbed molecule. The adsorption kinetics follows the pseudo-second order process. The correlation coefficients (R2) for Langmuir, Freundlich and Tempkin showed that the adsorption values obey Freundlich and Tempkin isotherm models. Moreover, the isotherm was most accurately described by the Freundlich model, and the maximum removal percentage was calculated to be 91.14% under optimized conditions of pH 6.6, 1 g/L of adsorbent dosage, and an initial CR dye concentration of 20 mg·L−1. Importantly, the hybrid adsorbent exhibited the highest adsorption capacity (80.15%) after five cycles of the adsorption–desorption process. Thermodynamic parameters, such as entropy changes, enthalpy changes and Gibbs free energy, were also evaluated. These results indicated that the PANI matrix can generally be better utilized for the removal of Congo red dye when appropriately dispersed on the surface of suitable support materials. These results provide a new direction to promote the separable adsorbents with increasing performance for adsorption of dye impurities from wastewater.