Modeling approach for Ti3C2 MXene-based fluorescent aptasensor for amoxicillin biosensing in water matrices

Amoxicillin, a member of the penicillin family, is primarily utilized for the treatment of various bacterial infections affecting ears, nose, throat, urinary tract, and skin. Given its widespread application in medicine, agriculture, environment, and food industry, the precise and sensitive detection of amoxicillin is important. This study introduces a novel approach to developing a sensitive and selective fluorescent aptasensor relying on fluorescence resonance energy transfer (FRET) for the specific detection of amoxicillin. The carboxyfluorescein-labeled aptamer serves as a energy donor, while MXene functions as an energy acceptor, and acting as a quencher. To achieve optimal detection efficiency, a dual optimization strategy utilizing RSM-CCD and ANN-GA was used to fine-tune experimental conditions. The fluorescence measurements revealed an expansive linear range extending from 100 to 2400 ng mL-1, accompanied by an exceptionally low detection limit of 1.53 ng mL-1. Additionally, it shows an excellent selectivity towards amoxicillin over other antibiotics commonly found in water matrices. The aptasensor demonstrates good stability and reproducibility; effectiveness of the aptasensor was validated by testing in real water samples. This remarkable sensitivity and broad dynamic range affirm the efficacy aptasensor in accurately detecting varying concentrations of amoxicillin in wastewater bodies.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.

Synthesis of novel PANI/PVA-NiCu composite material for efficient removal of organic dyes

The present work aims the synthesis of a novel, low cost, and environmentally friendly PANI/PVA-CuNi composite by chemical oxidative polymerization of aniline monomer and polyvinyl alcohol (PVA) as film matrix; several percentages of copper (Cu) and Nickel (Ni) were used. UV-Visible spectroscopy, FTIR, SEM-EDX, and TGA were used to characterize the nanocomposites. While PANI/PVA-CuNi nanocomposites were investigated in adsorption experiments of methylene blue (MB) under different controlled conditions (time reaction, adsorbent dosage, initial dye concentration, stirring speed, temperature, and pH of the medium) also various kinetic models were employed to evaluate the efficiency of the adsorption. The results revealed that the10 mg of PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni composites Catalyst removed (94% and 93% of methylene blue in 180 min respectively at 10^-5 M initial concentration of dye, pH of 13, stirring speed of 150 rpm, the temperature of 301 k. the kinetics data were properly fitted with the pseudo second-order model with a correlation coefficient of 0.98262 and 0.95881 using PANI/PVA-Cu₅₀N_i50 and PANI/PVA-Ni, respectively.

Degradation of Azithromycin from aqueous solution using Chlorine-ferrous- oxidation: ANN-GA modeling and Daphnia magna biotoxicity test assessment

Azithromycin (AZM), an antibacterial considered one of the most consumed drugs, especially during the period against the Covid 19 pandemic, and it is one of the persistent contaminants that can be released into aquatic ecosystems. The purpose of this study is to determine the efficacy of a Fenton-like process (chlorine/iron) for the degradation of AZM in an aqueous medium by determining the impact of several factors (the initial concentration of (FeSO₄, NaClO, pollutant), and the initial pH) on the degradation rate. The Response Surface Methodology (RSM) based on the Box-Wilson design as well as the Artificial Neural Network (ANN) modeling combined with a genetic algorithm (GA) approaches were used to determine the optimal levels of the selected variables and the optimal rate of degradation. The quadratic model of multi-linear regression developed indicated that the optimal conditions were a concentration of chlorine of 600 μM, the concentration of AZM is 32.8 mg/L, the mass of the catalyst FeSO₄ is 3.5 mg and a pH of 2.5, these optimal values gave a predicted and experimental yield of 64.05% and 70% respectively, the lack of fit test in RSM modeling (F₀ = 3.31 which is inferior to Fcritic (0.05, 10.4) = 5.96) indicates that the true regression function is not linear therefore, the ANN-GA modeling as non-linear regression indicated that the optimal conditions were a concentration of chlorine of 256 μM, the concentration of AZM is 5 mg/L, the mass of the catalyst FeSO₄ is 9.5 mg and a pH of 2.8, these optimal values gave a predicted and experimental yield of 79.69% and close to 80% respectively, Furthermore, biotoxicity tests were conducted to confirm the performance of our process using bio-indicators called daphnia (Daphnia magna), which demonstrated the efficacy of the like-Fenton process after 4 h of degradation.

Antimicrobial and antifungal properties of NiCu-PANI/PVA quaternary nanocomposite synthesized by chemical oxidative polymerization of polyaniline

Increasing antimicrobial resistance has led to use of novel technologies such as nanomaterials and nanocomposites that have shown effective antimicrobial and/or antifungal activities against several gram-positive and gram-negative bacteria. There have been limited studies on antimicrobial properties of the combined polymer nanocomposites with transitional bimetallic nanoparticles such as nickel (Ni) and copper (Cu). Thus, the main objective of this study was to synthesis, characterize and investigate the antibacterial and antifungal properties of NiCu-PANI/PVA nanocomposite. The nanocomposite films with different amount of Ni and Cu salts were synthesized by chemical oxidative polymerization of polyaniline using HCl as oxidant and PVA as a stabilizer. Optical, chemical composition, and morphological characteristics as well as thermal stability were evaluated using UV-Visible, FTIR, SEM-EDX, and TGA analyses. Antimicrobial properties were then determined using the disc diffusion assay against gram-negative bacteria (i.e., Escherichia coli ATCC 25922, Klebsiella pneumonia ATCC 700603, Proteus sp.,) and gram-positive bacteria (i.e., Staphylococcus aureus ATCC 2593). Fungal plant pathogens including Aspergillus niger and Fusarium oxysporum f. sp. pisi were also evaluated for determination of antifungal activity of NiCu-PANI/PVA films. Among the synthesized films, Ni₆₅Cu₃₅-PANI/PVA showed excellent antibacterial activity against all the bacteria strains examined in this study. The diameters of inhibition zones for Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 700603, Proteus sp., and Staphylococcus aureus ATCC 2593 were 23, 23, 17, and 18 mm, respectively indicating good antibacterial activities. Additionally, NiCu-PANI/PVA, particularly the films with higher Cu intake, showed better antifungal activity against Fusarium oxysporum f. sp. pisi. However, NiCu-PANI/PVA was ineffective against Aspergillus niger.

High-efficiency electrochemical degradation of phenol in aqueous solutions using Ni-PPy and Cu-PPy composite materials

Conductive crystalline polypyrrole (Cryst-PPy), Nickel-polypyrrole (Ni-PPy), and copper- polypyrole (Cu-PPy) hybrid materials were prepared using a chemical polymerization method in an aqueous solution. Part I was focused on the Chemical synthesis of Cryst-PPy powder from an organic medium. Cryst-PPy powder was successfully synthesized by chemical route from an organic medium of acetonitrile with polyethylene oxide as a stabilizing agent and oxidizing agent like potassium peroxydisulfate. The morphological study was showed the presence of spherical nanoparticles and cubic microparticles giving rise to a denser structure of PPy. In the second part, the based electrodes composites were examined in the oxidation of phenol by an electrochemical process in an alkaline medium. To follow the yield of phenol degradation at the alkaline solution, UV-visible analysis was performed at the following operating conditions: current density of 0.58 mA cm^-2, phenol initial concentration of 0.150 M and for 3 h processing; the rate of phenol elimination was 56%, 38% and 28% for Cu-PPy, Ni-PPy, and pure PPy electrodes respectively. Thus, can be found that the doped Cu-PPy electrodes electrode is a new material with high electrochemical oxidation ability for phenol degradation in aqueous solutions.

Photocatalytic degradation of Penicillin G in aqueous solutions: Kinetic, degradation pathway, and microbioassays assessment

The photocatalytic degradation of pharmaceutical micropollutants of Penicillin G (PG) was investigated in a photoreactor at a laboratory scale. The impact of type of catalyst, pH, and initial concentration of PG were studied. Maximum removal efficiency was obtained at pH = 6.8, [ZnO]₀ = 0.8 g L^-1, and [PG]₀ = 5 mg L^-1 and reaction time of 150 min. The addition of persulfate sodium (PPS) enhanced the efficiency of the photocatalytic reaction. The efficiency of photolysis process in the presence of PPS was significantly improved to 72.72% compared to the classical photocatalysis system (56.71%). Optimum concentration of PPS to completely degraded PG was found to be 500 mg L^-1. The QuEChERS extraction, GC-MS/MS method, and concentration technique showed favorable performance identification of the possible mechanism of PG degradation pathway. Toxicity of PG and its by-products were evaluated using microbioassays assessment based on nine selected bacterial strains. Results confirmed the effectiveness of the implemented system and its safe use via the bacteria Bacillus subtilis, which has illustrated significant activity. Due to the high efficiency, facility benefits, and low-cost of the suggested process, the process can be considered for the degradation of various pharmaceutical contaminants in pharmaceutical industry treatment under the optimal conditions.

A novel non-enzymatic glucose sensor based on NiFe(NPs)-polyaniline hybrid materials

This article was focused on the elaboration of NiFe-Polyaniline glucose sensors via electrochemical technique. Firstly, the PANi (polyaniline) fibers were synthesized by oxidation of the monomer aniline on FTO (fluorine tin oxide) substrate. Secondly, the Nickel-Iron nanoparticles (NiFe (NPs)) were obtained by the Chronoamperometry method on the Polyaniline surface. The NiFe-PANi hybrid electrode was characterized by scanning electron microscopy (SEM), force atomic microscopy (AFM), Fourier-transformed infrared (FTIR), and X-ray diffraction (XRD). The electrochemical glucose sensing performance of the NiFe alloy nanoparticle was studied by cyclic voltammetry and amperometry. The fabricated glucose sensor Ni-Fe hybrid material exhibited many remarkable sensing performances, such as low-response time (4 s), sensitivity (1050 μA mM^-1 cm^-2), broad linear range (from 10 μM -1 mM), and low limit of detection (LOD) (0.5 μM, S/N = 3). The selectivity, reliability, and stability of the NiFe hybrid material for glucose oxidation were also investigated. All the results demonstrated that the NiFe-PANi/FTO hybrid electrode is very promising for application in electrochemical glucose sensing.

Developmental epigenetic programming of adult germ cell death disease: Polycomb protein EZH2-miR-101 pathway

AIM

The Developmental Origin of Health and Disease refers to the concept that early exposure to toxicants or nutritional imbalances during perinatal life induces changes that enhance the risk of developing noncommunicable diseases in adulthood. Patients/materials & methods: An experimental model with an adult chronic germ cell death phenotype resulting from exposure to a xenoestrogen was used.

RESULTS

A reciprocal negative feedback loop involving decreased EZH2 protein level and increased miR-101 expression was identified. In vitro and in vivo knockdown of EZH2 induced an apoptotic process in germ cells through increased levels of apoptotic factors (BIM and BAD) and DNA repair alteration via topoisomerase 2B deregulation. The increased miR-101 levels were observed in the animal blood, meaning that miR-101 may be a part of a circulating mark of germ cell death.

CONCLUSION

miR-101-EZH2 pathway deregulation could represent a novel pathophysiological epigenetic basis for adult germ cell disease with environmental and developmental origins.

MicroRNAs as potential biomarkers in diseases and toxicology

MiRNAs (microRNAs) are single-stranded non-coding RNAs of approximately 21-23 nucleotides in length whose main function is to inhibit gene expression by interfering with mRNA processes. MicroRNAs suppress gene expression by affecting mRNA (messenger RNAs) stability, targeting the mRNA for degradation, or both. In this review, we have examined how microRNA expression could be altered following exposure to chemicals and how they could represent appropriate tissue and more interestingly circulating biomarkers. Among the key questions before using the microRNA for evaluation of risk toxicity, it remains still to clarify how they could be causally involved in the adverse effects and how stable their changes are.

Neonatal exposure to zearalenone induces long term modulation of ABC transporter expression in testis

Mycotoxin zearalenone (ZEN) is a cereal contaminant produced by various species of Fusarium fungi. When interacting with estrogen receptors, ZEN leads to animal fertility disturbances and other reproductive pathologies. Few data are available on the effects of perinatal exposure to ZEN, particularly in the blood-testis barrier. The aim of this study was to assess the impact of ZEN in adult rats exposed neonatally. We focused on the expression and cellular localization of major ABC transporters expressed in adult rat testis, comparing ZEN effects with those of Estradiol Benzoate (EB) neonatal exposure. Dose-dependent and long term modulations of mRNA and protein levels of Abcb1, Abcc1, Abcg2, Abcc4 and Abcc5 were observed, along with Abcc4 protein cellular delocalization. ZEN exposure of SerW3 Sertoli cells showed modulation of Abcb1, Abcc4 and Abcc5. Comparison with EB exposure showed similar modulation profiles for Abcg2 but differential modulations for Abcb1, Abcc1, Abcc4 and Abcc5 in vivo, and a similar profile for Abcb1 modulation by ZEN and EB, but differential modulation for Abcc4 and Abcc5 in vitro. ZEN and EB effects were inhibited by in vitro addition of the pure anti-estrogen ICI 182.780, suggesting the at least partial implication of ZEN estrogenic activity in these modulations. These results suggested that ZEN neonatal exposure could affect the exposure of testis to ABC transporter substrates, and negatively influence spermatogenesis and male fertility.

Breast-cancer anti-estrogen resistance 4 (BCAR4) encodes a novel maternal-effect protein in bovine and is expressed in the oocyte of humans and other non-rodent mammals

STUDY QUESTION

Does BCAR4 have a role in mammalian embryo development?

SUMMARY ANSWER

Expression, localization and functional data support that BCAR4 is a maternal-effect protein in non-rodent mammals.

WHAT IS KNOWN ALREADY

BCAR4 was previously identified as an oocyte-specific gene in cattle, and as a marker of certain breast tumors in humans.

STUDY DESIGN, SIZE, DURATION

Human oocytes were obtained from patients undergoing IVF, but had failed to mature after ovarian stimulation. Dog oocytes were obtained from ovariectomized bitches. Pig, horse and bovine ovaries were obtained from commercial slaughterhouses for extraction of immature oocyte-cumulus complexes. In vivo matured bovine matured oocytes were obtained after ovulation induction and ovulation inducing treatment of Montbeliard heifers.

MATERIALS, SETTING AND METHODS

Expression at the RNA level was analyzed by reverse transcription coupled to polymerase chain reaction. Western blot and immunolabeling coupled to confocal or electronic microscopy were used to analyze bovine protein expression and intracellular localization. For the functional approach, short-interfering RNA were microinjected into mature bovine oocytes, followed by IVF; cleavage and embryo development were recorded.

MAIN RESULTS AND THE ROLE OF CHANCE

The BCAR4 gene is conserved in mammalian species from various orders and has been lost in rodents after divergence with lagomorphs. The transcript is expressed in the oocytes of humans and domestic species. We bring the first experimental evidence of the BCAR4 protein in mammals. In cattle, the protein is not detected in immature oocytes but starts to be synthesized during maturation, increases in the zygote and persists until the morula stage. The protein is detected throughout the cytoplasm in mature oocytes, concentrates in and around the pronuclei in the zygote, and appears to shuttle in and out of the nuclei starting in the 2-cell embryo; BCAR4 is also present at the junctions between blastomeres from 2-cell to morula. In our functional approach, targeting the BCAR4 transcript by small-interfering RNA significantly compromised development to the morula or/and blastocyst stages (P < 0.05, logistic regression).

LIMITATIONS, REASONS FOR CAUTION

As indicated above, protein expression and function were investigated in cattle and mostly in vitro matured oocytes were used.

WIDER IMPLICATIONS OF THE FINDINGS

This study provides a novel candidate gene whose mutation or deregulation may underlie certain cases of unexplained female infertility.

Perinatal programming of adult rat germ cell death after exposure to xenoestrogens: role of microRNA miR-29 family in the down-regulation of DNA methyltransferases and Mcl-1

Different studies have pointed out that developmental exposure to environmental endocrine disruptors can induce long-term testicular germ cell death probably through epigenetic mechanisms. By using a model of early neonatal post-natal day (PND) 1 to 5 exposure of male rats to a xenoestrogen, estradiol benzoate (EB), we investigated the role of microRNA and DNA methyltransferases (DNMT) on the developmental effects of EB on the adult germ cell death process. Neonatal exposure to EB induced adult germ cell apoptosis together with a dose-dependent increase in miR-29a, miR-29b, and miR-29c expression. Increased miR-29 expression resulted in a decrease in DNMT1, DNMT3a, and DNMT3b and antiapoptotic myeloid cell leukemia sequence 1 (Mcl-1) protein levels as shown in 1) germ cells of adult rats exposed neonatally to EB and 2) in spermatogonial GC-1 transfected with miR-29. The DNMT decrease was associated with a concomitant increase in transcript levels of DNA methylation target genes, such as L1td1-1 ORF1 and ORF2, Cdkn2a, and Gstp1, in correlation with their pattern of methylation. Finally, GC-1 cell lines transfection with miR-29a, miR-29b, or miR-29c undergo apoptosis evidenced by Annexin-V expression. Together, the increased miR-29 with a subsequent reduction in DNMT and Mcl-1 protein levels may represent a basis of explanation for the adult expression of the germ cell apoptosis phenotype. These observations suggest that the increased expression of the "apoptomir" miR-29 family represents the upstream mechanism identified until now that is involved in adult germ cell apoptosis induced by a neonatal hormonal disruption.