Antimicrobial and in-silico evaluation of novel chalcone and amide-linked 1,4-disubstituted 1,2,3 triazoles

A highly efficient, selective, reversible and ultra-sensitive fluorescence "Turn-ON" chemosensor for aluminium ions by a novel Schiff base

The synthesis of a Schiff base-based chemosensor, denoted as H6L, was accomplished through the condensation reaction of Isophthalohydrazide and 2,6-dihydroxybenzaldehyde in an ethanol solvent. The resulting compound was further characterized using 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, as well as high-resolution mass spectrometry (HRMS). Extensive research has been conducted on several facets of metal sensing phenomena, revealing that the Schiff base H6L demonstrates discerning and expeditious fluorescence sensing characteristics specifically towards Al (III) in acetonitrile. The purported method detects Al (III) can be ascribed to the suppression of photo-induced electron transfer (PET) and the enhanced chelation-induced fluorescence (CHEF). The stoichiometry of metal-ligand complexes (2:1) was determined using Job's plots titrations, HRMS and subsequently confirmed using NMR titration studies. The H6L sensors demonstrated remarkable fluorescence sensing capabilities in acetonitrile, with a low detection limit (LOD) of 0.44 μM. This LOD is suitably low for the detection of Al3+, which is commonly found in many environmental and biological systems. Fluorescence lifetime measurement provides additional evidence of complexation of H6L with Al (III). The reversibility of the sensor was demonstrated through the introduction of pyrophosphate (PPi), which forms a complex with aluminium ions, thereby releasing the chemo sensor for subsequent utilization. The findings suggest that H6L has the potential to serve as a viable probe for the detection and identification of Al3+ ions.

Rejuvenation of Meropenem by Conjugation with Tilapia Piscidin-4 Peptide Targeting NDM-1 Escherichia coli

Gram-negative pathogens that produce β-lactamases pose a serious public health threat as they can render β-lactam antibiotics inactive via hydrolysis. This action contributes to the waning effectiveness of clinical antibiotics and creates an urgent need for new antimicrobials. Antimicrobial peptides (AMPs) exhibiting multimodal functions serve as a potential source in spite of a few limitations. Thus, the conjugation of conventional antibiotics with AMPs may be an effective strategy to leverage the advantages of each component. In this study, we conjugated meropenem to the AMP Tilapia piscidin 4 (TP4) using a typical coupling reaction. The conjugate was characterized by using HPLC-MS, HR-MS, and MS-MS fragmentation analysis. It was then evaluated in terms of antibacterial potency, hemolysis, and cytotoxicity toward RAW264.7 and CCD-966SK cell lines. The conjugation of meropenem with TP4 significantly reduced the cytotoxicity compared to TP4. Conjugation of unprotected TP4 with meropenem resulted in cross-linking at the N-terminal and lysine sites. The structural activity relationship of the two isomers of the TP4-meropenem conjugate was investigated. Both the isomers showed notable antibacterial activities against NDM-1 Escherichia coli and reduced red blood cell hemolysis as compared to TP4. Lysine conjugate (TP4-K-Mero) showed lesser hemolysis than the N-terminal conjugate (TP4-N-Mero). Molecular modeling further revealed that the conjugates can bind to lipopolysaccharides and inhibit NDM-1 β-lactamase. Together, these data show that conjugation of antibiotics with AMP can be a feasible approach to increase the therapeutic profile and effectively target multidrug-resistant pathogens. Furthermore, antibiotic conjugation at different AMP sites tends to show unique biological properties.

Mothana R, M. Noman O, Eto B, Chigr F, Chigr M. Synthesis and In Silico Analysis of New Polyheterocyclic Molecules Derived from [1,4]-Benzoxazin-3-one and Their Inhibitory Effect against Pancreatic α-Amylase and Intestinal α-Glucosidase

This study focuses on synthesizing a new series of isoxazolinyl-1,2,3-triazolyl-[1,4]-benzoxazin-3-one derivatives 5a-5o. The synthesis method involves a double 1,3-dipolar cycloaddition reaction following a "click chemistry" approach, starting from the respective [1,4]-benzoxazin-3-ones. Additionally, the study aims to evaluate the antidiabetic potential of these newly synthesized compounds through in silico methods. This synthesis approach allows for the combination of three heterocyclic components: [1,4]-benzoxazin-3-one, 1,2,3-triazole, and isoxazoline, known for their diverse biological activities. The synthesis procedure involved a two-step process. Firstly, a 1,3-dipolar cycloaddition reaction was performed involving the propargylic moiety linked to the [1,4]-benzoxazin-3-one and the allylic azide. Secondly, a second cycloaddition reaction was conducted using the product from the first step, containing the allylic part and an oxime. The synthesized compounds were thoroughly characterized using spectroscopic methods, including 1H NMR, 13C NMR, DEPT-135, and IR. This molecular docking method revealed a promising antidiabetic potential of the synthesized compounds, particularly against two key diabetes-related enzymes: pancreatic α-amylase, with the two synthetic molecules 5a and 5o showing the highest affinity values of 9.2 and 9.1 kcal/mol, respectively, and intestinal α-glucosidase, with the two synthetic molecules 5n and 5e showing the highest affinity values of -9.9 and -9.6 kcal/mol, respectively. Indeed, the synthesized compounds have shown significant potential as antidiabetic agents, as indicated by molecular docking studies against the enzymes α-amylase and α-glucosidase. Additionally, ADME analyses have revealed that all the synthetic compounds examined in our study demonstrate high intestinal absorption, meet Lipinski's criteria, and fall within the required range for oral bioavailability, indicating their potential suitability for oral drug development.

First In Vitro-In Silico Analysis for the Determination of Antimicrobial and Antioxidant Properties of 2-(4-Methoxyphenylamino)-2-oxoethyl Methacrylate and p-Acetamide

The antibacterial, antifungal, and antioxidant activities of 2-chloro-N-(4-methoxyphenyl)acetamide (p-acetamide) and 2-(4-methoxyphenylamino)-2-oxoethyl methacrylate (MPAEMA) were investigated by in vitro experiments and in silico analyses. MPAEMA has an antibacterial effect only against Gram-positive Staphylococcus aureus. It was determined that this did not affect any other bacteria and Candida glabrata yeast. On the other hand, p-acetamide showed antimicrobial activity against S. aureus ATCC 25923, C. glabrata ATCC 90030, Bacillus subtilis NRRL 744, Enterococcus faecalis ATCC 551289, Escherichia coli ATCC 25922, Klebsiella pneumoniae NRLLB4420, Pseudomonas aeruginosa ATCC 27853, and Listeria monocytogenes ATCC 1911. p-Acetamide showed the greatest antifungal effect by inhibiting the colony growth of Trichoderma longibrachiatum (98%). This was followed by Mucor plumbeus with 83% and Fusarium solani with 21%. MPAEMA inhibited colony growth of T. longibrachiatum by 95% and that of M. plumbeus by 91%. Also, p-acetamide and MPAEMA had a scavenging effect on free radicals. According to results of the in silico analysis, the antimicrobial effect of these compounds is due to their effect on DNA ligase. Based on drug-likeness analysis, they were found to be consistent with the Lipinski, Veber, or Ghose rule. p-Acetamide and MPAEMA may be used as drugs.

Recent Advancement in Bioactive Chalcone Hybrids as Potential Antimicrobial Agents in Medicinal Chemistry

Chalcones are flavonoid-related aromatic ketones and enones generated from plants. The chalcones have a wide range of biological activities, such as anti-tumor, calming, and antimicrobial activities. In the present review, we have focused on the recently published original research articles on chalcones as a unique antibacterial framework in medicinal chemistry. Chalcones are structurally diverse moieties and can be split into simple and hybrid chalcones, with both having core pharmacophore 1,3-diaryl-2-propen-1-one. Chalcones are isolated from natural sources and also synthesized by using various methods. Their structure-activity relationship, mechanisms, and list of patents are also summarized in this paper. This review article outlines the currently published antimicrobial chalcone hybrids and suggests that chalcone derivatives may be potential antimicrobial agents in the future.

Antimicrobial Properties of Azole Functional Silica Nanocomposites

Silica nanoparticles have become more attractive due to their surface characteristics, versatility, biocompatibility, and morphological and physicochemical properties. For this reason, their use in biological applications has been expanding in recent years. In this study, after functionalizing silica nanoparticles with glycidyl methacrylate monomer, nanocomposites were formed by attaching 1,2,4‐Triazole, 3‐Amino‐1,2,4‐Triazole, and 5‐Aminotetrazole particles to the surface. Notably, the thermal degradation temperature of all nanocomposites was determined to surpass 200 °C. However, it is worth mentioning that despite the favorable water uptake rates observed for MT(7.64 %) and M3(5.98 %) nanocomposites, MT did not exhibit resistance against Fenton chemicals and experienced degradation. It is important to note that the material loss in M3 nanocomposites is minimal, measuring less than 1 %. In order to reveal the antifungal and antibacterial activity of the synthesized nanoparticles, Minimum inhibitory concentration(MIC), as well as Minimum Fungicidal Concentration(MFC) against the yeast strain Saccharomyces cerevisiae, and Minimum Bactericidal Concentration(MBC) values against bacteria strains, Staphylococcus aureus, Enterococcus faecalis and Escherichia coli were determined. The findings of the study indicated that MP, M3, and M5 nanocomposites displayed a moderate level of antibacterial activity. It is noteworthy, however, that the antibacterial activity diminished when triazole was combined with MP at concentrations exceeding 100 mg/mL.

Recent advances in 1,2,3- and 1,2,4-triazole hybrids as antimicrobials and their SAR: A critical review

With the widespread use and sometimes even abuse of antibiotics, the problem of bacterial resistance to antibiotics has become very serious, and it is posing a great threat to global health. Therefore, development of new antibiotics is imperative. Triazoles are five-membered, nitrogen-containing aromatic heterocyclic scaffolds, with two isomeric forms, i.e. 1,2,3-triazole and 1,2,4-triazole. Triazole-containing compounds have a wide range of biological activities such as antibacterial, antifungal, anticancer, antioxidant, antitubercular, antimalarial, anti-HIV, anticonvulsant, anti-inflammatory, antiulcer, analgesic, and etc. The bioactivities and the diversity of triazole-containing drugs have attracted wide interest in these heterocycles. Various antibiotic triazole hybrids have been developed, and most of which have shown potent antimicrobial activities. In this review, we summarized the recent advances in triazole hybrids as potential antibacterial agents and their structure-activity relationships (SARs). The information gained through SAR studies will provide further insights into the development of new triazole antimicrobials.

1H-1,2,3-Triazole-4H-chromene-D-glucose hybrid compounds: Synthesis and inhibitory activity against Mycobacterium tuberculosis protein tyrosine phosphatase B

A series of 1H-1,2,3-triazole-4H-chromene-D-glucose hybrid compounds 7a-w were synthesized using click chemistry of 2-amino-7-propargyloxy-4H-chromene-3-carbonitriles 5a-w. CuNPs@montmorillonite was used as a catalyst in the presence of DIPEA as an additive for this chemistry. All synthesized 1H-1,2,3-triazoles were examined for in vitro inhibition against Mycobacterium tuberculosis protein tyrosine phosphatase B (MtbPtpB). Nine 1H-1,2,3-triazoles, including 7c-e, 7h, 7i, and 7r-t, displayed remarkable inhibitory activity against MtbPtpB with IC₅₀  < 10 μM; compound 7t exhibited the most potent inhibition in vitro with an IC₅₀ value of 0.61 μM. Kinetic studies of the three most active compounds, 7c,h,t, showed their competitive inhibition toward the MtbPtpB enzyme. Induced-fit docking and MM-GBSA studies on the enzyme (PDB: 2OZ5) revealed that the most active compound 7t was more effective against MtbPtpB. Residues Arg64, Arg136, Ash165, Arg166, and Arg63 in the binding pocket were identified as potential ligand-binding hot-spot residues for ligand 7t. The binding free energy calculation by the MM-GBSA approach for ligand 7t indicated that Coulomb, lipophilic, and van der Waals energy terms are major contributors to the inhibitor binding. Furthermore, the stability of the ligand-protein complex and the structural insights into the mode of binding were confirmed by 300-ns molecular dynamics simulation of 7t/2OZ5.

Novel 1,2,3-Triazole-Based Benzothiazole Derivatives: Efficient Synthesis, DFT, Molecular Docking, and ADMET Studies

A new series of 1,2,3-triazole derivatives 5a-f based on benzothiazole were synthesized by the 1,3-dipolar cycloaddition reaction of S-propargyl mercaptobenzothiazole and α-halo ester/amide in moderate to good yields (47-75%). The structure of all products was characterized by 1H NMR, 13C NMR, and CHN elemental data. This protocol is easy and green and proceeds under mild and green reaction conditions with available starting materials. The structural and electronic analysis and 1H and 13C chemical shifts of the characterized structure of 5e were also calculated by applying the B3LYP/6-31 + G(d, p) level of density functional theory (DFT) method. In the final section, all the synthesized compounds were evaluated for their anti-inflammatory activity by biochemical COX-2 inhibition, antifungal inhibition with CYP51, anti-tuberculosis target protein ENR, DPRE1, pks13, and Thymidylate kinase by molecular docking studies. The ADMET analysis of the molecules 5a-f revealed that 5d and 5a are the most-promising drug-like molecules out of the six synthesized molecules.

The 1,2,3-triazole 'all-in-one' ring system in drug discovery: a good bioisostere, a good pharmacophore, a good linker, and a versatile synthetic tool

INTRODUCTION

The 1,2,3-triazole ring occupies an important space in medicinal chemistry due to its unique structural properties, synthetic versatility and pharmacological potential making it a critical scaffold. Since it is readily available through click chemistry for creating compound collections against various diseases, it has become an emerging area of interest for medicinal chemists.

AREAS COVERED

This review article addresses the unique properties of the1,2,3-triazole nucleus as an intriguing ring system in drug discovery while focusing on the most recent medicinal chemistry strategies exploited for the design and development of 1,2,3-triazole analogs as inhibitors of various biological targets.

EXPERT OPINION

Evidently, the 1,2,3-triazole ring with unique structural features has enormous potential in drug design against various diseases as a pharmacophore, a bioisoster or a structural platform. The most recent evidence indicates that it may be more emerging in drug molecules in near future along with an increasing understanding of its prominent roles in drug structures. The synthetic feasibility and versatility of triazole chemistry make it certainly ideal for creating compound libraries for more constructive structure-activity relationship studies. However, more comparative and target-specific studies are needed to gain a deeper understanding of the roles of the 1,2,3-triazole ring in molecular recognition.[Figure: see text].

The green chemistry of chalcones: Valuable sources of privileged core structures for drug discovery

The sustainable use of resources is essential in all production areas, including pharmaceuticals. However, the aspect of sustainability needs to be taken into consideration not only in the production phase, but during the whole medicinal chemistry drug discovery trajectory. The continuous progress in the fields of green chemistry and the use of artificial intelligence are contributing to the speed and effectiveness of a more sustainable drug discovery pipeline. In this light, here we review the most recent sustainable and green synthetic approaches used for the preparation and derivatization of chalcones, an important class of privileged structures and building blocks used for the preparation of new biologically active compounds with a broad spectrum of potential therapeutic applications. The literature here reported has been retrieved from the SciFinder database using the term "chalcone" as a keyword and filtering the results applying the concept: "green chemistry", and from the Reaxys database using the keywords "chalcone" and "green". For both databases the time-frame was 2017-2022. References were manually selected based on relevance.