Development of poly (lactic-co-glycolic acid)-collagen scaffolds for tissue engineering

Effects of Two Decellularization Protocols on the Mechanical Behavior and Structural Properties of the Human Urethra

This study evaluates the effects of two decellularization protocols, enzyme-detergent (ED) and detergent-detergent (DD), on the structural and biomechanical properties of human urethral tissue. Urethral samples from 18 individuals were divided into ED (n = 7) and DD (n = 11) groups, with native samples (n = 3) serving as controls. Histological and ultrastructural analyses confirmed that both protocols effectively removed cellular content while preserving essential extracellular matrix (ECM) elements, such as collagen and elastic fibers. Immunohistochemical staining for collagen IV and fibronectin revealed no significant differences between decellularized and native tissues, indicating intact ECM structure. Biomechanical testing demonstrated that DD-treated tissues had significantly lower Cauchy stress (1494.8 ± 518.4 kPa) when compared to native tissues (2439.7 ± 578.7 kPa, p = 0.013), while ED-treated tissues were similar to both groups. Both decellularized groups exhibited reduced stretch at failure and elastic modulus compared to native tissues. Cytotoxicity assays using adipose-derived stem cells demonstrated no signs of toxicity in either protocol. Overall, both ED and DD protocols effectively preserved the urethral ECM structure and mechanical properties, making them suitable for potential use in tissue-engineered grafts and for biobanking purposes. Further research is needed to refine and optimize decellularization methods to improve scaffold recellularization and ensure clinical safety and efficacy.

Effects of bone surface topography and chemistry on macrophage polarization

Surface structure plays a crucial role in determining cell behavior on biomaterials, influencing cell adhesion, proliferation, differentiation, as well as immune cells and macrophage polarization. While grooves and ridges stimulate M2 polarization and pits and bumps promote M1 polarization, these structures do not accurately mimic the real bone surface. Consequently, the impact of mimicking bone surface topography on macrophage polarization remains unknown. Understanding the synergistic sequential roles of M1 and M2 macrophages in osteoimmunomodulation is crucial for effective bone tissue engineering. Thus, exploring the impact of bone surface microstructure mimicking biomaterials on macrophage polarization is critical. In this study, we aimed to sequentially activate M1 and M2 macrophages using Poly-L-Lactic acid (PLA) membranes with bone surface topographical features mimicked through the soft lithography technique. To mimic the bone surface topography, a bovine femur was used as a model surface, and the membranes were further modified with collagen type-I and hydroxyapatite to mimic the bone surface microenvironment. To determine the effect of these biomaterials on macrophage polarization, we conducted experimental analysis that contained estimating cytokine release profiles and characterizing cell morphology. Our results demonstrated the potential of the hydroxyapatite-deposited bone surface-mimicked PLA membranes to trigger sequential and synergistic M1 and M2 macrophage polarizations, suggesting their ability to achieve osteoimmunomodulatory macrophage polarization for bone tissue engineering applications. Although further experimental studies are required to completely investigate the osteoimmunomodulatory effects of these biomaterials, our results provide valuable insights into the potential advantages of biomaterials that mimic the complex microenvironment of bone surfaces.

Fabrication of atelocollagen-coated bioabsorbable suture and the evaluation of its regenerative efficacy in Achilles tendon healing using a rat experimental model

Recently, the incidence of Achilles tendon ruptures (ATRs) has become more common, and repair surgery using a bioabsorbable suture is generally preferred, particularly in the case of healthy patients. Sutures composed of poly(lactic-co-glycolic acid) (PLGA) are commonly used in ATR surgeries. Nevertheless, owing to the inherent limitations of PLGA, novel bioabsorbable sutures that can accelerate Achilles tendon healing are sought. Recently, several studies have demonstrated the beneficial effects of atelocollagen on tendon healing. In this study, poly(3,4-dihydroxy-L-phenylalanine) (pDOPA), a hydrophilic biomimetic material, was used to modify the hydrophobic surface of a PLGA suture (Vicryl, VC) for the stable coating of atelocollagen on its surface. The main objective was to fabricate an atelocollagen-coated VC suture and evaluate its performance in the healing of Achilles tendon using a rat model of open repair for ATR. Structural analyses of the surface-modified suture indicated that the collagen was successfully coated on the VC/pDOPA suture. Postoperative in vivo biomechanical analysis, histological evaluation, ultrastructural/morphological analyses, and western blotting confirmed that the tendons in the VC/pDOPA/Col group exhibit superior healing than those in the VC and VC/pDOPA groups after 1 and 6 weeks following the surgery. The this study suggests that atelocollagen-coated PLGA/pDOPA sutures are preferable for future medical applications, especially in the repair of ATR.

Collagen for neural tissue engineering: Materials, strategies, and challenges

Neural tissue engineering (NTE) has made remarkable strides in recent years and holds great promise for treating several devastating neurological disorders. Selecting optimal scaffolding material is crucial for NET design strategies that enable neural and non-neural cell differentiation and axonal growth. Collagen is extensively employed in NTE applications due to the inherent resistance of the nervous system against regeneration, functionalized with neurotrophic factors, antagonists of neural growth inhibitors, and other neural growth-promoting agents. Recent advancements in integrating collagen with manufacturing strategies, such as scaffolding, electrospinning, and 3D bioprinting, provide localized trophic support, guide cell alignment, and protect neural cells from immune activity. This review categorises and analyses collagen-based processing techniques investigated for neural-specific applications, highlighting their strengths and weaknesses in repair, regeneration, and recovery. We also evaluate the potential prospects and challenges of using collagen-based biomaterials in NTE. Overall, this review offers a comprehensive and systematic framework for the rational evaluation and applications of collagen in NTE.

Effect of sodium chloride as a porogen agent in mechanical properties of PLGA/HA nanocomposite scaffolds

In this study, the novel poly (lactic-co-glycolic acid)-Hydroxyapatite nanoparticles (PLGA/HA) nanocomposite scaffolds were fabricated with solvent casting and particulate leaching (SCPL) method. The role of sodium chloride (NaCl) particles with diameters of 250-400 μm as porogen agent in the mechanical strength of the produced scaffolds was evaluated. The prepared scaffolds were characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and compressive tests. The results showed the high compressive strength and homogenous porous structures for PLGA/HA nanocomposite scaffolds compared to pure PLGA due to the presence of HA nanoparticles in nanocomposites. Furthermore, the compressive strength of nanocomposite scaffolds increased by varying the weight ratio of hydroxyapatite nanoparticles to polymer (0, 20, 40 wt%) at constant salt ratio and decreased by increasing the weight ratio of salt particles to polymer from 1 to 3 wt% due to more porosity in nanocomposite scaffolds. These results confirmed that not only the nanocomposite scaffolds exhibited high mechanical properties, homogenous structures, as well as good porosity but also, they could be useful for bone tissue application.

Glycyrrhizic acid-loaded pH-sensitive poly-(lactic-co-glycolic acid) nanoparticles for the amelioration of inflammatory bowel disease

Aim: To fabricate and evaluate the therapeutic efficacy of glycyrrhizic acid (GA)-loaded pH-sensitive nanoformulations that specifically target and combat mucosal inflammation of the colon. Methods: GA-loaded Eudragit® S100/poly-(lactic-co-glycolic acid) nanoparticles were developed through modified double-emulsion evaporation coupled with solvent evaporation coating techniques and analyzed for physicochemical characteristics, surface chemistry, release kinetics, site-retention and therapeutic effectiveness. Results: Nanoparticles have a particle size of approximately 200 nm, high encapsulation efficiency, desired surface chemistry with pH-dependent and sustained drug release behavior following the Gompertz kinetic model. In vivo retention and therapeutic effectiveness in the inflamed colon tissues were confirmed by macroscopic and microscopic indices, cytokine analysis and antioxidant assays. Conclusion: GA-loaded Eudragit S100/poly-(lactic-co-glycolic acid) nanoparticles could efficiently deliver GA to the colon and ameliorate the mucosal inflammation for a prolonged duration.

Overview of Urethral Reconstruction by Tissue Engineering: Current Strategies, Clinical Status and Future Direction

BACKGROUND

Urinary tract is subjected to a variety of disorders such as urethral stricture, which often develops as a result of scarring process. Urethral stricture can be treated by urethral dilation and urethrotomy; but in cases of long urethral strictures, substitution urethroplasty with genital skin and buccal mucosa grafts is the only option. However a number of complications such as infection as a result of hair growth in neo-urethra, and stone formation restrict the application of those grafts. Therefore, tissue engineering techniques recently emerged as an alternative approach, aiming to overcome those restrictions. The aim of this review is to provide a comprehensive coverage on the strategies employed and the translational status of urethral tissue engineering over the past years and to propose a combinatory strategy for the future of urethral tissue engineering.

METHODs

Data collection was based on the key articles published in English language in years between 2006 and 2018 using the searching terms of urethral stricture and tissue engineering on PubMed database.

RESULTS

Differentiation of mesenchymal stem cells into urothelial and smooth muscle cells to be used for urologic application does not offer any advantage over autologous urothelial and smooth muscle cells. Among studied scaffolds, synthetic scaffolds with proper porosity and mechanical strength is the best option to be used for urethral tissue engineering.

CONCLUSION

Hypoxia-preconditioned mesenchymal stem cells in combination with autologous cells seeded on a pre-vascularized synthetic and biodegradable scaffold can be said to be the best combinatory strategy in engineering of human urethra.

Synthesis and characterization of collagen/PLGA biodegradable skin scaffold fibers

The aim of this study is to investigate the applicability of poly(lactic-co-glycolic acid) (PLGA)/collagen composite scaffold for skin tissue engineering. PLGA and collagen were dissolved in HFIP as a common solvent and fibrous scaffolds were prepared by electrospinning method. The scaffolds were characterized by scanning electron microscopy (SEM), FTIR spectroscopy, mercury porosimetry, tensile strength, biocompatibility assays and Biodegradation. Cytotoxicity and cell adhesion were tested for two cell line groups, human dermal fibroblast (HDF) and human keratinocyte (HaCat). SEM images showed appropriate cell adhesion to the scaffold for both cell lines. MTT assays indicated that the cell viability of HDF cells increased with time, but the number of HaCat cells decreased after 14 days. The ultimate tensile strength was suitable for skin substitute application, but its elongation at break was rather low. For successful clinical application of the PLGA/collagen scaffold, some properties especially mechanical strain needs to be improved.

Biosynthetic PCL-graft-Collagen Bulk Material for Tissue Engineering Applications

Biosynthetic materials have emerged as one of the most exciting and productive fields in polymer chemistry due to their widespread adoption and potential applications in tissue engineering (TE) research. In this work, we report the synthesis of a poly(ε-caprolactone)-graft-collagen (PCL-g-Coll) copolymer. We combine its good mechanical and biodegradable PCL properties with the great biological properties of type I collagen as a functional material for TE. PCL, previously dissolved in dimethylformamide/dichloromethane mixture, and reacted with collagen using carbodiimide coupling chemistry. The synthesised material was characterised physically, chemically and biologically, using pure PCL and PCL/Coll blend samples as control. Infrared spectroscopy evidenced the presence of amide I and II peaks for the conjugated material. Similarly, XPS evidenced the presence of C-N and N-C=O bonds (8.96 ± 2.02% and 8.52 ± 0.63%; respectively) for PCL-g-Coll. Static contact angles showed a slight decrease in the conjugated sample. However, good biocompatibility and metabolic activity was obtained on PCL-g-Coll films compared to PCL and blend controls. After 3 days of culture, fibroblasts exhibited a spindle-like morphology, spreading homogeneously along the PCL-g-Coll film surface. We have engineered a functional biosynthetic polymer that can be processed by electrospinning.

Biomimetic design and fabrication of multilayered osteochondral scaffolds by low-temperature deposition manufacturing and thermal-induced phase-separation techniques

Integrative osteochondral repair is a useful strategy for cartilage-defect repair. To mimic the microenvironment, it is necessary that scaffolds effectively mimic the extracellular matrix of natural cartilage and subchondral bone. In this study, biomimetic osteochondral scaffolds containing an oriented cartilage layer, a compact layer, and a three-dimensional (3D)-printed core-sheath structured-bone layer were developed. The oriented cartilage layer was designed to mimic the structural and material characteristics of native cartilage tissue and was fabricated with cartilage matrix-chitosan materials, using thermal-induced phase-separation technology. The 3D-printed core-sheath structured-bone layer was fabricated with poly(L-lactide-co-glycolide)/β-tricalcium phosphate-collagen materials by low-temperature deposition technology, using a specially designed core-sheath nozzle, and was designed to mimic the mechanical characteristics of subchondral bone and improve scaffold hydrophilicity. The compact layer was designed to mimic the calcified-layer structure of natural cartilage to ensure the presence of different suitable microenvironments for the regeneration of bone and cartilage. A dissolving-bonding process was developed to effectively combine the three parts together, after which the bone and cartilage scaffolds exhibited good mechanical properties and hydrophilicity. Additionally, goat autologous bone mesenchymal stem cells (BMSCs) were isolated and then seeded into the bone and cartilage layers, respectively, and following a 1 week culture in vitro, the BMSC-scaffold constructs were implanted into a goat articular-defect model. Our results indicated that the scaffolds exhibited good biocompatibility, and 24 weeks after implantation, the femoral condyle surface was relatively flat and consisted of a large quantity of hyaloid cartilage. Furthermore, histological staining revealed regenerated trabecular bone formed in the subchondral bone-defect area. These results provided a new method to fabricate biomimetic osteochondral scaffolds and demonstrated their effectiveness for future clinical applications in cartilage-defect repair.

Fabrication and characterization of three-dimensional poly(lactic acid-co-glycolic acid), atelocollagen, and fibrin bioscaffold composite for intervertebral disk tissue engineering application

The use of synthetically derived poly(lactic- co-glycolic acid) scaffold and naturally derived materials in regeneration of intervertebral disks has been reported in many previous studies. However, the potential effect of poly(lactic- co-glycolic acid) in combination with atelocollagen or fibrin or both atelocollagen and fibrin bioscaffold composite have not been mentioned so far. This study aims to fabricate and characterize three-dimensional poly(lactic- co-glycolic acid) scaffold incorporated with (1) atelocollagen, (2) fibrin, and (3) both atelocollagen and fibrin combination for intervertebral disk tissue engineering application. The poly(lactic- co-glycolic acid) without any natural, bioscaffold composites was used as control. The chemical conformation, morphology, cell–scaffold attachment, porosity, water uptake capacity, thermal properties, mechanical strength, and pH level were evaluated on all scaffolds using attenuated total reflectance Fourier transform infrared, scanning electron microscope, gravimetric analysis, swelling test, differential scanning calorimetry, and Instron E3000, respectively. Biocompatibility test was conducted to assess the intervertebral disk, annulus fibrosus cells viability using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The attenuated total reflectance Fourier transform infrared results demonstrated notable peaks of amide bond suggesting interaction of atelocollagen, fibrin, and both atelocollagen and fibrin combination into the poly(lactic- co-glycolic acid) scaffold. Based on the scanning electron microscope observation, the pore size of the poly(lactic- co-glycolic acid) structure significantly reduced when it was incorporated with atelocollagen and fibrin. The poly(lactic- co-glycolic acid)–atelocollagen scaffolds demonstrated higher significant swelling ratios, mechanical strength, and thermal stability than the poly(lactic- co-glycolic acid) scaffold alone. All the three bioscaffold composite groups exhibited the ability to reduce the acidic poly(lactic- co-glycolic acid) by-product. In this study, the biocompatibility assessment using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cells proliferation assay demonstrated a significantly higher annulus fibrosus cells viability in poly(lactic- co-glycolic acid)–atelocollagen–fibrin compared to poly(lactic- co-glycolic acid) alone. The cellular attachment is comparable in poly(lactic- co-glycolic acid)–atelocollagen–fibrin and poly(lactic- co-glycolic acid)–fibrin scaffolds. Overall, these results may suggest potential use of poly(lactic- co-glycolic acid) combined with atelocollagen and fibrin bioscaffold composite for intervertebral disk regeneration.

Grafting collagen on poly (lactic acid) by a simple route to produce electrospun scaffolds, and their cell adhesion evaluation

Increasing bioactivity and mechanical properties of polymers to produce more suitable scaffold for tissue engineering is a recurrent goal in the development of new biomedical materials. In this study, collagen-functionalized poly (lactic acid), PLA, was obtained by means of a simple grafting route, and electrospun scaffolds were produced to grow cells in vitro; their bioactivity was compared with scaffolds made of physical blends of PLA and collagen. Grafting was verified via nuclear magnetic resonance, attenuated total reflection-Fourier transform infrared and X-ray photoelectron spectroscopy. The cell adhesion performance of the scaffolds was studied using macrophages. Elastic modulus (74.7 megapascals) and tensile strength (3.0 megapascals) of the scaffold made from PLA grafted with collagen were substantially higher than the scaffolds made from physical blends of collagen and PLA: 32 and 2.16 megapascals, respectively, implying a more resistant material because of the chemical bond of the polypeptide to PLA. Besides, the fibers had more uniform diameter without defects. Scaffolds made from PLA grafted with collagen presented four-fold increase in cell adhesion than those of PLA blended with collagen. Furthermore, cell spreading within the scaffolds occurred only when collagen-functionalized poly (lactic acid) was used. These results open a new option for the easy tailoring of nanofiber-based scaffolds in three dimensions for tissue engineering.

Electrospun 3D Fibrous Scaffolds for Chronic Wound Repair

Chronic wounds are difficult to heal spontaneously largely due to the corrupted extracellular matrix (ECM) where cell ingrowth is obstructed. Thus, the objective of this study was to develop a three-dimensional (3D) biodegradable scaffold mimicking native ECM to replace the missing or dysfunctional ECM, which may be an essential strategy for wound healing. The 3D fibrous scaffolds of poly(lactic acid-co-glycolic acid) (PLGA) were successfully fabricated by liquid-collecting electrospinning, with 5~20 µm interconnected pores. Surface modification with the native ECM component aims at providing biological recognition for cell growth. Human dermal fibroblasts (HDFs) successfully infiltrated into scaffolds at a depth of ~1400 µm after seven days of culturing, and showed significant progressive proliferation on scaffolds immobilized with collagen type I. In vivo models showed that chronic wounds treated with scaffolds had a faster healing rate. These results indicate that the 3D fibrous scaffolds may be a potential wound dressing for chronic wound repair.

Effect of structure, topography and chemistry on fibroblast adhesion and morphology

Surface biofunctionalisation of many biodegradable polymers is one of the used strategies to improve the biological activity of such materials. In this work, the introduction of collagen type I over the surface of a biodegradable polymer (poly lactic acid) processed in the forms of films and fibers leads to an enhancing of the cellular adhesion of human dermal fibroblast when compared to unmodified polymer and biomolecule-physisorbed polymer surface. The change of topography of the material does not affect the cellular adhesion but results in a higher proliferation of the fibroblast cultured over the fibers. Moreover, the difference of topography governs the cellular morphology, i.e. cells adopt a more stretched conformation where cultured over the films while a more elongated with lower area morphology are obtained for the cells grown over the fibers. This study is relevant for designing and modifying different biodegradable polymers for their use as scaffolds for different applications in the field of Tissue Engineering and Regenerative Medicine.

The osteogenic differentiation of human bone marrow MSCs on HUVEC-derived ECM and β-TCP scaffold

Extracellular matrix (ECM) serves a key role in cell migration, attachment, and cell development. Here we report that ECM derived from human umbilical vein endothelial cells (HUVEC) promoted osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSC). We first produced an HUVEC-derived ECM on a three-dimensional (3D) beta-tricalcium phosphate (β-TCP) scaffold by HUVEC seeding, incubation, and decellularization. The HUVEC-derived ECM was then characterized by SEM, FTIR, XPS, and immunofluorescence staining. The effect of HUVEC-derived ECM-containing β-TCP scaffold on hMSC osteogenic differentiation was subsequently examined. SEM images indicate a dense matrix layer deposited on the surface of struts and pore walls. FTIR and XPS measurements show the presence of new functional groups (amide and hydroxyl groups) and elements (C and N) in the ECM/β-TCP scaffold when compared to the β-TCP scaffold alone. Immunofluorescence images indicate that high levels of fibronectin and collagen IV and low level of laminin were present on the scaffold. ECM-containing β-TCP scaffolds significantly increased alkaline phosphatase (ALP) specific activity and up-regulated expression of osteogenesis-related genes such as runx2, alkaline phosphatase, osteopontin and osteocalcin in hMSC, compared to β-TCP scaffolds alone. This increased effect was due to the activation of MAPK/ERK signaling pathway since disruption of this pathway using an ERK inhibitor PD98059 results in down-regulation of these osteogenic genes. Cell-derived ECM-containing calcium phosphate scaffolds is a promising osteogenic-promoting bone void filler in bone tissue regeneration.

Creation of bony microenvironment with CaP and cell-derived ECM to enhance human bone-marrow MSC behavior and delivery of BMP-2

Extracellular matrix (ECM) comprises a rich meshwork of proteins and proteoglycans, which not only contains biological cues for cell behavior, but is also a reservoir for binding growth factors and controlling their release. Here we aimed to create a suitable bony microenvironment with cell-derived ECM and biodegradable β-tricalcium phosphate (β-TCP). More specifically, we investigated whether the ECM produced by bone marrow-derived mesenchymal stem cells (hBMSC) on a β-TCP scaffold can bind bone morphogenetic protein-2 (BMP-2) and control its release in a sustained manner, and further examined the effect of ECM and the BMP-2 released from ECM on cell behaviors. The ECM was obtained through culturing the hBMSC on a β-TCP porous scaffold and performing decellularization and sterilization. SEM, XPS, FTIR, and immunofluorescent staining results indicated the presence of ECM on the β-TCP and the amount of ECM increased with the incubation time. BMP-2 was loaded onto the β-TCP with and without ECM by immersing the scaffolds in the BMP-2 solution. The loading and release kinetics of the BMP-2 on the β-TCP/ECM were significantly slower than those on the β-TCP. The β-TCP/ECM exhibited a sustained release profile of the BMP-2, which was also affected by the amount of ECM. This is probably because the β-TCP/ECM has different binding mechanisms with BMP-2. The β-TCP/ECM promoted cell proliferation. Furthermore, the BMP-2-loaded β-TCP/ECM stimulated reorganization of the actin cytoskeleton, increased expression of alkaline phosphatase and calcium deposition by the cells compared to those without BMP-2 loading and the β-TCP with BMP-2 loading.

Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review

Hydrogels are physically or chemically cross-linked polymer networks that are able to absorb large amounts of water. They can be classified into different categories depending on various parameters including the preparation method, the charge, and the mechanical and structural characteristics. The present review aims to give an overview of hydrogels based on natural polymers and their various applications in the field of tissue engineering. In a first part, relevant parameters describing different hydrogel properties and the strategies applied to finetune these characteristics will be described. In a second part, an important class of biopolymers that possess thermosensitive properties (UCST or LCST behavior) will be discussed. Another part of the review will be devoted to the application of cryogels. Finally, the most relevant biopolymer-based hydrogel systems, the different methods of preparation, as well as an in depth overview of the applications in the field of tissue engineering will be given.

Poly (lactic-co-glycolic acid) as a controlled release delivery device

Poly (lactic-co-glycolic acid) (PLGA) is a biodegradable polymer used to make resorbable sutures, and is also used in other applications in tissue engineering. Being an artificial polymer, its degradation rate can be tailored to suit its application. It can be easily moulded into structures with suitable mechanical strength and degrades into relatively harmless products in the body. Its adjustable degradation rate also makes it a potentially excellent controlled release delivery device. However, the functionalization of PLGA with bioactive molecules usually requires extensive chemical modification. Chemical modification may compromise the mechanical strength of PLGA and inactivate the bioactive molecules. In this paper, a study is done to investigate the coating of an angiogenic factor on unmodified PLGA suture substrates for the differentiation of human mesenchymal stem cells (hMSC) into endothelial cells (EC). The results show that the method used to anchor vascular endothelial growth factor (VEGF) onto the PLGA surface can enable the gradual release of VEGF from the substrate into solution to induce the differentiation of hMSCs into ECs. Thus, this method can potentially be used to coat PLGA materials like sutures, meshes and scaffolds, rendering them functional as effective controlled release delivery devices for a wide range of bioactive molecules.