Approaches to improve compatibility of starch filled polymer system: A review

Straw Tar Epoxy Resin for Carbon Fiber-Reinforced Plastic: A Review

The massive consumption of fossil fuels has led to the serious accumulation of carbon dioxide gas in the atmosphere and global warming. Bioconversion technologies that utilize biomass resources to produce chemical products are becoming widely accepted and highly recognized. The world is heavily dependent on petroleum-based products, which may raise serious concerns about future environmental security. Most commercially available epoxy resins (EPs) are synthesized by the condensation of bisphenol A (BPA), which not only affects the human endocrine system and metabolism, but is also costly to produce and environmentally polluting. In some cases, straw tar-based epoxy resins have been recognized as potential alternatives to bisphenol A-based epoxy resins, and are receiving increasing attention due to their important role in overcoming the above problems. Using straw tar and lignin as the main raw materials, phenol derivatives were extracted from the middle tar instead of bisphenol A. Bio-based epoxy resins were prepared by replacing epichlorohydrin with epoxylated lignin to press carbon fiber sheets, which is a kind of bio-based fine chemical product. This paper reviews the research progress of bio-based materials such as lignin modification, straw pyrolysis, lignin epoxidation, phenol derivative extraction, and synthesis of epoxy resin. It improves the performance of carbon fiber-reinforced plastic (CFRP) while taking into account the ecological and environmental protection, so that the epoxy resin is developed in the direction of non-toxic, harmless and high-performance characteristics, and it also provides a new idea for the development of bio-based carbon fibers.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm-1 to 3280 cm-1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Microwave-Induced Behavior and Digestive Properties of the Lotus Seed Starch-Chlorogenic Acid Complex

The effect of chlorogenic acid (CA) on the dielectric response of lotus seed starch (LS) after microwave treatment, the behavior and digestive characteristics of the resulting starch/chlorogenic acid complex (LS-CA) at different degrees of gelatinization and the inhibition of α-amylase by chlorogenic acid were investigated. The variation in dielectric loss factor, ε″, and dielectric loss tangent, tanδε, of the microwave thermal conversion indicated that LS-CA had a more efficient microwave-energy-to-thermal-energy conversion efficiency than LS. This gelatinized LS-CA to a greater extent at any given temperature between 65 and 85 °C than LS, and it accelerated the degradation of the starch crystalline structure. The greater disruption of the crystal structure decreased the bound water content and increased the thermal stability of LS-CA compared to LS. The simulated in vitro digestion found that the presence of the LS-CA complex improved the slow-digestion property of lotus seed starch by increasing its content of resistant and slowly digested starch. In addition, the release of chlorogenic acid during α-amylase hydrolysis further slowed starch digestion by inhibiting α-amylase activity. These findings provide a foundation for understanding the correlation between the complex behavior and digestive properties of naturally polyphenol-rich, starch-based foods, such as LS, under microwave treatment, which will facilitate the development of starch-based foods with tailored digestion rates, lower final degrees of hydrolysis and glycemic indices.

Thermogravimetric, Morphological and Infrared Analysis of Blends Involving Thermoplastic Starch and Poly(ethylene-co-methacrylic acid) and Its Ionomer Form

This study focuses on the thermal properties and structural features of blends consisting of thermoplastic starch (TPS) and poly(ethylene-co-methacrylic acid) copolymer (EMAA) or its ionomer form (EMAA-54Na). The aim is to investigate how carboxylate functional groups of the ionomer form intervene in blends compatibility at the interface of the two materials and how this impacts their properties. Two series of blends (TPS/EMAA and TPS/EMAA-54Na) were produced with an internal mixer, with TPS compositions between 5 and 90 wt%. Thermogravimetry shows two main weight losses, indicating that TPS and the two copolymers are primarily immiscible. However, a small weight loss existing at intermediate degradation temperature between those of the two pristine components reveals specific interactions at the interface. At a mesoscale level, scanning electron microscopy confirmed thermogravimetry results and showed a two-phase domain morphology, with a phase inversion at around 80 wt% TPS, but also revealed a different surface appearance evolution between the two series. Fourier-transformed infrared spectroscopy analysis also revealed discrepancies in fingerprint between the two series of blends, analysed in terms of additional interactions in TPS/EMAA-54Na coming from the supplementary sodium neutralized carboxylate functions of the ionomer.

Intermolecular interactions between starch and polyvinyl alcohol for improving mechanical properties of starch-based straws

Starch/polyvinyl alcohol (PVA) degradable straws with different PVA contents were prepared by the twin-screw extrusion method. The results showed that the starch/PVA straws with 40 % PVA (PS4) had the highest dispersion uniformity of starch and PVA to achieve the best compatibility, and the compatibility size was below the micron level. Molecular interactions between starch and 40 % polyvinyl alcohol reached the highest due to the highest strength of hydrogen bonds, hence resulting in the highest texture densities. Consequently, the largest compatibility and molecular interactions significantly improved the mechanical properties and water resistance of PS4. Compared to the starch/PVA straw with 0 % PVA (PS0), swelling volume of PS4 decreased by 45.5 % (4 °C) and 65.2 % (70 °C), respectively. After soaking, the diameter strength increased by 540.1 % (4 °C, 1 h) and 638.7 % (70 °C, 15 min), respectively. Water absorption decreased by 45.3 % (4 °C, 30 min) and 27.6 % (70 °C, 30 min).

Recent Advances in Starch-Based Blends and Composites for Bioplastics Applications

Environmental pollution by synthetic polymers is a global problem and investigating substitutes for synthetic polymers is a major research area. Starch can be used in formulating bioplastic materials, mainly as blends or composites with other polymers. The major drawbacks of using starch in such applications are water sensitivity and poor mechanical properties. Attempts have been made to improve the mechanical properties of starch-based blends and composites, by e.g., starch modification or plasticization, matrix reinforcement, and polymer blending. Polymer blending can bring synergetic benefits to blends and composites, but necessary precautions must be taken to ensure the compatibility of hydrophobic polymers and hydrophilic starch. Genetic engineering offers new possibilities to modify starch inplanta in a manner favorable for bioplastics applications, while the incorporation of antibacterial and/or antioxidant agents into starch-based food packaging materials brings additional advantages. In conclusion, starch is a promising material for bioplastic production, with great potential for further improvements. This review summarizes the recent advances in starch-based blends and composites and highlights the potential strategies for overcoming the major drawbacks of using starch in bioplastics applications.

Applications of Starch Biopolymers for a Sustainable Modern Agriculture

Protected cultivation in modern agriculture relies extensively on plastic-originated mulch films, nets, packaging, piping, silage, and various applications. Polyolefins synthesized from petrochemical routes are vastly consumed in plasticulture, wherein PP and PE are the dominant commodity plastics. Imposing substantial impacts on our geosphere and humankind, plastics in soil threaten food security, health, and the environment. Mismanaged plastics are not biodegradable under natural conditions and generate problematic emerging pollutants such as nano-micro plastics. Post-consumed petrochemical plastics from agriculture face many challenges in recycling and reusing due to soil contamination in fulfilling the zero waste hierarchy. Hence, biodegradable polymers from renewable sources for agricultural applications are pragmatic as mitigation. Starch is one of the most abundant biodegradable biopolymers from renewable sources; it also contains tunable thermoplastic properties suitable for diverse applications in agriculture. Functional performances of starch such as physicomechanical, barrier, and surface chemistry may be altered for extended agricultural applications. Furthermore, starch can be a multidimensional additive for plasticulture that can function as a filler, a metaphase component in blends/composites, a plasticizer, an efficient carrier for active delivery of biocides, etc. A substantial fraction of food and agricultural wastes and surpluses of starch sources are underutilized, without harnessing useful resources for agriscience. Hence, this review proposes reliable solutions from starch toward timely implementation of sustainable practices, circular economy, waste remediation, and green chemistry for plasticulture in agriscience

Blending of phthalated starch and surface functionalized rice husk extracted nanosilica with LDPE towards developing an efficient packaging substitute

Starch was transformed to hydrophobic starch phthalate (contact angle 109°) in order to achieve a good dispersion in LDPE matrix. Nanosilica derived from rice husk after aminopropyltrimethoxysilane functionalization was also incorporated into the blend as property-enhancing filler. The produced crystalline starch phthalate had a lower particle size of 9.87 μm and a higher surface area of 2.87 m²/g compared to starch (40.28 μm, 1.91 m²/g). The potential quality modification of starch phthalate as a substitute for starch towards the production of a perfect biodegradable blend was quantified in terms of mechanical (tensile, tear, stiffness), optical (haze, transmittance), and biodegradation assessments. Interfacial adhesion between LDPE and starch phthalate was well justified by the morphology and enhancement in mechanical properties like tensile and tear strength from 8.87 to 12.67 MPa and 96.57 to 187.10 N/mm for 30% of starch or starch phthalate in LDPE matrix, respectively. Starch phthalate compared to starch blended films showed a higher biodegradation rate of 14.8 and 13.5% in garden soil and vegetable waste respectively in 1 year (at 30% biofiller), with a good first-order kinetics fit of the weight loss data having a higher degradation rate constant at higher content of biofiller in the blend.

Production of bioplastic through food waste valorization

The tremendous amount of food waste from diverse sources is an environmental burden if disposed of inappropriately. Thus, implementation of a biorefinery platform for food waste is an ideal option to pursue (e.g., production of value-added products while reducing the volume of waste). The adoption of such a process is expected to reduce the production cost of biodegradable plastics (e.g., compared to conventional routes of production using overpriced pure substrates (e.g., glucose)). This review focuses on current technologies for the production of polyhydroxyalkanoates (PHA) from food waste. Technical details were also described to offer clear insights into diverse pretreatments for preparation of raw materials for the actual production of bioplastic (from food wastes). In this respect, particular attention was paid to fermentation technologies based on pure and mixed cultures. A clear description on the chemical modification of starch, cellulose, chitin, and caprolactone is also provided with a number of case studies (covering PHA-based products) along with a discussion on the prospects of food waste valorization approaches and their economic/technical viability.

Conceptualizing the relation between halal logo, perceived product quality and the role of consumer knowledge

Purpose

The purpose of this paper is to conceptualize the impact of halal logo as an extrinsic food packaging cue on perceived food quality moderated by the role of consumer knowledge.

Design/methodology/approach

An exhaustive literature review has been undertaken for the conceptual development. The nexus between halal logo and perceived food quality has been developed which provides a foundation for the further research.

Findings

The findings of this paper indicate that the halal-labelled products create a psychological impact about the quality of the food product.

Practical implications

This paper presents a brief overview of the lucrative opportunities in halal business for Pakistan. The findings of this paper can be adopted by the marketers for the development of proper marketing strategies. The empirical investigations of this paper could offer the base to the marketers to invest in favorable product packaging cues. The role halal logo as a food quality indicator has previously been overlooked in the literature. The impact of halal logo on food quality perception is emergent with avenues for study across various cultures and religions.

Originality/value

This is a useful paper which proposes a useful testable model for study in Pakistani consumer market to fill the gaps of Islamic consumer behavior literature.

Selected properties of biodegradable material produced from thermoplastic starch with by-products of food industry addition

In this work extrusion process were used to create thermoplastic starch and to mix obtained starch with linen, quince and apple pomace at the same time. Obtained starch beads were formed in shapes. In experimental material was determined thermal conductivity, water absorption and the solubility in water. It is possible to get the biodegradable material produced from thermoplastic starch with an addition of fruit pomace. Adding pomace and glycerine to the biodegradable material made from starch change of susceptibility on water action. In the case of materials containing pomace, glycerine addition decreases the susceptibility on water action compared to the material manufactured with pomace addition but without glycerine. In the material containing pomace, glycerine addition caused the increase of the thermal insulation time compared to the material with pomace but no glycerine in it.