New Ni-free superelastic alloy for orthodontic applications

Phase Equilibria of the Ti-Nb-Mn Ternary System at 1173K, 1273K and 1373K

Phase equilibria in the Ti-Nb-Mn ternary system at 1173K, 1273K and 1373K were studied through the equilibrated alloy method by using scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and X-ray diffraction (XRD) techniques. A new stable ternary phase K was confirmed and the composition was around Ti50Nb7Mn43. A wide-range continuous solid solution phase (Ti,Nb)Mn2 with the C14 Laves structure had been found at these temperatures due to the same phase structures of TiMn2 and NbMn2 phases. The solubility of Nb in TiMn4, αTiMn and βTiMn intermetallic compounds was determined. Based on the experimental results and reasonable extrapolations, the isothermal sections of Ti-Nb-Mn ternary system at 1173K, 1273K and 1373K were constructed.

In vitro wearing away of orthodontic brackets and wires in different conditions: A review

Introduction

The release of metallic ions from orthodontic brackets and wires typically depends on their quality (chemical composition) and the medium to which they are exposed, e.g., acidic, alkaline, substances with a high fluoride concentration, etc. This review examines corrosion and wear of orthodontic brackets, wires, and arches exposed to different media, including: beverages (juices), mouthwashes and artificial saliva among others, and the possible health effects resulting from the release of metallic ions under various conditions.

Objective

This review aims to determine the exposure conditions that cause the most wear on orthodontic devices, as well as the possible health effects that can be caused by the release of metallic ions under various conditions.

Sources

A search was carried out in the Scopus database, for articles related to oral media that can corrode brackets and wires. The initial research resulted in 8,127 documents, after applying inclusion and exclusion criteria, 76 articles remained.

Conclusion

Stainless steel, which is commonly used in orthodontic devices, is the material that suffers the most wear. It was also found that acidic pH, alcohols, fluorides, and chlorides worsen orthodontic material corrosion. Further, nickel released from brackets and wires can cause allergic reactions and gingival overgrowth into patients.

Research Progress of Fe-Based Superelastic Alloys

In recent years, superelastic alloys have become a current research hotspot due to the large recoverable deformation, which far exceeds the elastic recovery. This will create more possibilities in practical applications. At present, superelastic alloys are widely used in the fields of machinery, aerospace, transmission, medicine, etc., and become smart materials with great potential. Among superelastic alloys, Fe-based superelastic alloys are widely used due to the advantages of low cost, easy processing, good plasticity and toughness, and wide applicable temperature range. The research progress of Fe-based superelastic alloys are reviewed in this paper. The mechanism of thermoelastic martensitic transformation and its relation to superelasticity are summarized. The effects of the precipitate, grain size, grain orientation, and texture on the superelasticity of Fe-based superelastic alloys are discussed in detail. It is expected to provide a guide on the development and understanding of Fe-based superelastic alloys. The future development of Fe-based superelastic alloys are prospected.

Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials

Porous shape memory alloys (SMAs), including NiTi and Ni-free Ti-based alloys, are unusual materials for hard-tissue replacements because of their unique superelasticity (SE), good biocompatibility, and low elastic modulus. However, the Ni ion releasing for porous NiTi SMAs in physiological conditions and relatively low SE for porous Ni-free SMAs have delayed their clinic applications as implantable materials. The present article reviews recent research progresses on porous NiTi and Ni-free SMAs for hard-tissue replacements, focusing on two specific topics: (i) synthesis of porous SMAs with optimal porous structure, microstructure, mechanical, and biological properties; and, (ii) surface modifications that are designed to create bio-inert or bio-active surfaces with low Ni releasing and high biocompatibility for porous NiTi SMAs. With the advances of preparation technique, the porous SMAs can be tailored to satisfied porous structure with porosity ranging from 30% to 85% and different pore sizes. In addition, they can exhibit an elastic modulus of 0.4⁻15 GPa and SE of more than 2.5%, as well as good cell and tissue biocompatibility. As a result, porous SMAs had already been used in maxillofacial repairing, teeth root replacement, and cervical and lumbar vertebral implantation. Based on current research progresses, possible future directions are discussed for "property-pore structure" relationship and surface modification investigations, which could lead to optimized porous biomedical SMAs. We believe that porous SMAs with optimal porous structure and a bioactive surface layer are the most competitive candidate for short-term and long-term hard-tissue replacement materials.

Influence of the microstructure on electrochemical corrosion and nickel release in NiTi orthodontic archwires

The aim of this work was to determine the influence of the present phases and the chemical composition on the corrosion behavior and the nickel ion release of the NiTi orthodontic archwires. Eight Ni-Ti archwires from six commercial brands, in the as-received condition, were studied. The chemical composition, roughness, microstructure and the proportion of the phases as well as the corrosion behavior were analyzed for each archwire. The nickel ion release was characterized in artificial saliva immersion settings ranging up to 4 weeks. The results show that the presence of the martensitic phase improves corrosion resistance and significantly decreases Ni release into exterior medium in comparison with the austenitic specimens. In spite of the partial loss of superelasticity produced in the martensitic phase, it could be of great interest for biomedical applications, as it could minimize sensitization and allergies and improve biocompatibility and corrosion resistance of NiTi shape memory alloys.