Facile synthesis of PSMA-g-3ABA/MWCNTs nanocomposite as a substrate for hemoglobin immobilization: Application to catalysis of H2O2

Electroconductive bioplatform based on dextrin for the immobilization of hemoglobin: Application for electrochemical monitoring of H2O2

A novel biodegradable dextrin-based nanocomposite, involving polypyrrole (PPy) and hydrophilic dextrin (Dex) (PPy@Dex) was prepared using in-situ radical chemical polymerization technique. The obtained PPy@Dex bionanocomposite was fully characterized by FT-IR, XRD, FESEM, and DSC methods. The exceptional properties such as biocompatibility, high surface area, the proper functional group on the surface, and outstanding electrical conductivity of synthesized bionanocomposite made it a superior candidate over biomolecules immobilization. Electrochemical observations revealed that the PPy@Dex-coated glassy carbon electrode (GCE) demonstrated improved performance, making it a suitable substrate for immobilizing hemoglobin (Hb) and constructing an efficient biosensor. The resulting biosensor, named Hb-PPy@Dex/GCE, exhibited high activity in the reduction of hydrogen peroxide (H2O2). Amperometric examinations demonstrated an extensive linear range from 2 to 350 μM for Hb-PPy@Dex/GCE. The detection limit of the proposed approach was calculated to be 0.54 μM, following the S/N = 3 protocol.

Novel enzymatic graphene oxide based biosensor for the detection of glutathione in biological body fluids

In this work, we report a novel enzymatic biosensor based on glutathione peroxidase (GSH-Px), graphene oxide (GO) and nafion for the electrochemical sensing of glutathione (GSH) in body fluids. GSH-Px was immobilized covalently via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) onto modified glassy carbon electrode (GCE) decorated with GO and nafion and successfully used for sensing of GSH in the presence of H₂O₂ as catalyst with Michaelis-Menten constant about 0.131 mmol/L. The active surface are of GCE improve from 0.183 cm² to 0.225 cm² after modification with GO. The introduced biosensor (GSH-Px/GO/nafion/GCE) was used for monitoring of GSH over the range 0.003-370.0 μM, with a detection limit of 1.5 nM using differential pulse voltammetric (DPV) method. The GSH-Px/GO/nafion/GCE was successfully applied to the determination of GSH in real samples.

Properties and Recent Advantages of N,N’-dialkylimidazolium-ion Liquids Application in Electrochemistry

:

N,Nʹ-dialkylimidazolium-ion liquids is one of the important ionic liquids with a wide range of application as conductive electrolyte and in electrochemistry. The modified electrodes create a new view in fabrication of electroanalytical sensors. Many modifiers have beeen suggested for modification of electroanalytical sensor since many years ago. Over these years, ionic liquids and especially room temperature ionic liquids have attracted more attention due to their wide range of electrochemical windows and high electrical conductivity. N,Nʹ-dialkylimidazolium-ion liquids are one of the main important ionic liquids suggested for modification of bare electrodes and especially carbon paste electrodes. Although many review articles have reported onthe use of ionic liquids in electrochemical sensors, no review article has been specifically introduced so far on the review of the advantages of N,Nʹ-dialkylimidazolium ionic liquid. Therefore, in this review paper we focused on the introduction of recent advantages of N,Nʹ-dialkyl imidazolium ionic liquid in electrochemistry.

Functionalized gold nanoparticles: promising and efficient diagnostic and therapeutic tools for HIV/AIDS

Functionalized gold nanoparticles are recognized as promising vehicles in the diagnosis and treatment of human immunodeficiency virus (HIV) owing to their excellent biocompatibility with biomolecules (like DNA or RNA), their potential for multivalency and their unique optical and structural properties. In this context, this review article focuses on the diverse detection abilities and delivery and uptake methodologies of HIV by targeting genes and proteins using gold nanoparticles on the basis of different shapes and sizes in order to promote its effective expression. In addition, recent trends in gold nanoparticle mediated HIV detection, delivery and uptake and treatment are highlighted considering their cytotoxic effects on healthy human cells.

Synthesis and characterization of PCL-DA:PEG-DA based polymeric blends grafted with SMA hydrogel as bio-degradable intrauterine contraceptive implant

Presently available long-acting reversible female contraceptive implants are said to be an effective way of preventing unintended pregnancy. Unacceptable side effects attributed by these contraceptive implants act as a major drawback for the practitioners. These problems pave the way for the development of a new form of long-acting non-hormonal female contraceptive implant, especially in the developing countries. PCL-DA: PEG-DA polymeric scaffold is grafted with Styrene Maleic Anhydride (SMA) based hydrogel, and their physicochemical, thermal and biological parameters are being explored for developing a bio-degradable form of the non-hormonal intrauterine contraceptive implant. With the fixed ratio of PEG-DA: PCL-DA polymer, SMA hydrogel was added at four different concentrations to determine the optimum concentration of SMA hydrogel for the development of a promising long-acting biodegradable intrauterine contraceptive implant. Structural elucidation of the polymers was confirmed using ¹H and ¹³C NMR spectroscopic analyses. The physiochemical characterization report suggests that SMA hydrogel interacts with the PCL-DA: PEG-DA polymeric scaffold through intermolecular hydrogen bonding interaction. The in-vitro spermicidal activity of the polymeric scaffold increases when the concentration of SMA based hydrogel in the polymer samples is increased without showing any significant toxicological effects. From the study results, it may be concluded that SMA hydrogel grafted PCL-DA: PEG-DA scaffold can be developed as intra-uterine biodegradable non-hormonal female contraceptive implant due to its excellent bio-compatibility and spermicidal activity.

Synthesis and utilization of Co3O4 doped carbon nanofiber for fabrication of hemoglobin-based electrochemical sensor

In this paper cobalt oxide (Co₃O₄) nanoparticles were mixed with polyacrylonitrile to prepare Co₃O₄ doped carbon nanofiber (CNF) composite by electrospinning and carbonization, which was further used to modify on carbon ionic liquid electrode (CILE). Hemoglobin (Hb) was immobilized on Co₃O₄-CNF/CILE surface with Nafion acted as the protective film to fabricate an electrochemical biosensor (Nafion/Hb/Co₃O₄-CNF/CILE). Electrochemical behavior of Hb on the electrode was investigated with a pair of quasi-reversible redox peak appeared on cyclic voltammogram and electrochemical parameters were calculated. Moreover, this biosensor had good analytical capabilities for electrocatalytic reduction of different substrates including trichloroacetic acid, potassium bromate and sodium nitrite with wider detection range from 40.0 to 260.0 mmol L^-1, 0.1 to 48.0 mmol L^-1 and 1.0 to 12.0 mmol L^-1 by cyclic voltammetry, respectively. The proposed method showed excellent anti-interferences ability with good selectivity and was successful used for quantitative detection of real samples, which displayed the potential applications to develop into a new analytical device.

Impact of styrene maleic anhydride (SMA) based hydrogel on rat fallopian tube as contraceptive implant with selective antimicrobial property

Development of non-hormonal female contraception is a need to combat against increasing population growth. The presently available short term or long term female contraceptives and sterilization methods have their own restrictions and side effects. With this objective, herein, we describe an innovative insight about the use of hydrogel formulation consisting of Styrene Maleic Anhydride (SMA) dissolved in Dimethyl Sulfoxide (DMSO) as non-hormonal fallopian tube contraceptive implant. Firstly, in vitro behavior of SMA hydrogel was evaluated by in vitro swelling and rheological properties to comprehend the polymeric hydrogel property post implantation inside the fallopian tube. Simulated Uterine Fluid (SUF) was used to simulate female reproductive tract environment in this study. Mechanical strength of the hydrogel when subjected to dynamic environment post implantation in the fallopian tube was estimated by the G' values demonstrated. SMA hydrogel expressed selective antimicrobial activity against opportunistic pathogens (Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus) while having limited consequence over the growth of Lactobacillus spp. After confirmation of cytocompatibility against primary rat endometrial cell lines, the polymeric hydrogel was implanted inside the uterine horns of Sprague-Dawley rats. In vivo biocompatibility of the hydrogel was confirmed by histological and immunohistochemical evaluation of uterine tissue sections. Hematology, blood biochemistry and organ toxicity (kidney, liver, spleen, lungs and heart) also revealed biocompatibility of SMA hydrogel. The results of the current study indicated that the SMA copolymer dissolved in DMSO to form hydrogel has excellent biocompatibility for application as female contraceptive gel which can be implanted in the fallopian tube.

Nanomaterials for Electrochemical Immunosensing

Electrochemical immunosensors resulting from a combination of the traditional immunoassay approach with modern biosensors and electrochemical analysis constitute a current research hotspot. They exhibit both the high selectivity characteristics of immunoassays and the high sensitivity of electrochemical analysis, along with other merits such as small volume, convenience, low cost, simple preparation, and real-time on-line detection, and have been widely used in the fields of environmental monitoring, medical clinical trials and food analysis. Notably, the rapid development of nanotechnology and the wide application of nanomaterials have provided new opportunities for the development of high-performance electrochemical immunosensors. Various nanomaterials with different properties can effectively solve issues such as the immobilization of biological recognition molecules, enrichment and concentration of trace analytes, and signal detection and amplification to further enhance the stability and sensitivity of the electrochemical immunoassay procedure. This review introduces the working principles and development of electrochemical immunosensors based on different signals, along with new achievements and progress related to electrochemical immunosensors in various fields. The importance of various types of nanomaterials for improving the performance of electrochemical immunosensor is also reviewed to provide a theoretical basis and guidance for the further development and application of nanomaterials in electrochemical immunosensors.

Molecularly imprinted poly(4-amino-5-hydroxy-2,7-naphthalenedisulfonic acid) modified glassy carbon electrode as an electrochemical theophylline sensor

Theophylline is an inexpensive drug employed in asthma and chronic obstructive pulmonary disorder medications and is toxic at higher concentration. The development of a molecularly imprinted polymer based theophylline electrochemical sensor on glassy carbon electrode by the electropolymerization of 4-amino-5-hydroxy-2,7-naphthalenedisulfonic acid is being discussed in this work. The MIP modification enhances the theophylline recognition ability and the electron transfer kinetics of the bare electrode. The parameters, controlling the performance of the imprinted polymer based sensor, like number of electropolymerization cycles, composition of the pre-polymerization mixture, pH and immersion time were investigated and optimized. The interaction energy and the most stable conformation of the template-monomer complex in the pre-polymerization mixture were determined computationally using ab initio calculations based on density functional theory. The amperometric measurements showed that the developed sensor has a method detection limit of 0.32μM for the dynamic range of 0.4 to 17μM, at optimized conditions. The transducer possesses appreciable selectivity in the presence of structurally similar interferents such as theobromine, caffeine and doxofylline. The developed sensor showed remarkable stability and reproducibility and was also successfully employed in theophylline detection from commercially available tablets.

Fabrication of a sensitive amperometric sensor for NADH and H2O2 using palladium nanoparticles-multiwalled carbon nanotube nanohybrid

Palladium nanoparticles decorated multiwalled carbon nanotubes (PdNPs-MWCNTs) were synthesized and simply cast on the surface of a glassy carbon electrode (GCE) to prepare an amperometric sensor. The fabricated sensor (PdNPs-MWCNTs/GCE) showed excellent electrocatalytic activity towards NADH and H2O2 oxidation and H2O2 reduction. A fast, linear and highly sensitive response was observed for NADH in the concentration range between 0.1 and 200 μM with a detection limit (S/N=3) of 32 nM. Also, the sensor exhibited fast and sensitive responses (<2 s) towards H2O2. The sensitivity and detection limit for H2O2 at the operating potential of +0.35 V were 167 nA μM(-1)cm(-2) and 1.2 μM, respectively and better than those obtained at the operating potential of -0.25 V (68 nA μM(-1)cm(-2) and 14 μM). Moreover, further modification of the proposed sensor by glucose oxidase led to the fabrication of a glucose biosensor with satisfactory performance.

Monoamine oxidase B layer-by-layer film fabrication and characterization toward dopamine detection

In this work nanostructured film composites of the monoamine oxidase B (MAO-B) enzyme, free or encapsulated in liposomes, were fabricated by the layer-by-layer (LbL) self-assembly technique, employing polyethylene imine (PEI) as polycation. Initially, the MAO-B enzyme was incorporated into liposomes in order to preserve its enzymatic structure ensuring their activity and catalytic stability. The LbL film growth was monitored by surface plasmon resonance (SPR) by gold resonance angle shift analysis after each bilayer deposition. Subsequently, the films were applied as amperometric biosensors for dopamine detection using Prussian Blue (PB) as the electron mediator. The biosensor fabricated by MAO-B incorporated into liposomes composed of DPPG:POPG in the ratio (1:4) (w/w) showed the best performance with a sensitivity of 0.86 (μA cm(-2))/(mmol L(-1)) and a detection limit of 0.33 mmol L(-1).

A highly efficient urea detection using flower-like zinc oxide nanostructures

A novel matrix based on flower-like zinc oxide nanostructures (ZnONF) has been fabricated using hydrothermal method and exploited successfully for the development of urea biosensor. Urease (Urs) is physically immobilized onto the ZnO nanostructure matrix synthesized over platinized silicon substrate. The surface morphology and crystallographic structure of the as-grown ZnONF have been characterized using a scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques. The fabricated amperometric biosensor (Urs/ZnONF/Pt/Ti/Si) exhibits a linear sensing response towards urea over the concentration range 1.65 mM to 16.50mM with an enhanced sensitivity (~132 μA/mM/cm(2)) and a fast response time of 4s. The relatively low value of Michaelis-Menten constant (Km) of 0.19 mM confirms the high affinity of the immobilized urease on the nanostructured ZnONF surface towards its analyte (urea). The obtained results demonstrate that flower-like ZnO nanostructures serve as a promising matrix for the realization of efficient amperometric urea biosensor with enhanced response characteristics.

Multilayered electromagnetic bionanocomposite based on alginic acid: Characterization and biological activities

Poly(aniline-co-pyrrole)@Fe3O4@alginic acid (PACP@Fe3O4@AA) bionanocomposite was synthesized by a two-step method. In the first step, the AA@Fe3O4 nanocomposite was synthesized via the in-situ co-precipitation technique. In the second step, the PACP@Fe3O4@AA bionanocomposite was synthesized through the emulsion polymerization. Several techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, ultraviolet visible spectroscopy, scanning electron microscopy, and thermogravimetric analysis were utilized for the characterization of the synthesized materials. The presence of AA@Fe3O4 in the bionanocomposite enhanced the electrical conductivity as well as the thermal stability of the PACP@Fe3O4@AA bionanocomposite. The scanning electron micrograph of the PACP@Fe3O4@AA bionanocomposite demonstrated a nanosphere structure. The vibrating sample magnetometer analysis displayed that both AA@Fe3O4 and PACP@Fe3O4@AA bionanocomposites were super-paramagnetic at room temperature. The PACP@Fe3O4@AA bionanocomposite had good antioxidant and antibacterial activities. Furthermore, a synergistic effect was observed for the antifungal activity.

A sensitive glucose biosensor based on Ag@C core-shell matrix

Nano-Ag particles were coated with colloidal carbon (Ag@C) to improve its biocompatibility and chemical stability for the preparation of biosensor. The core-shell structure was evidenced by transmission electron microscope (TEM) and the Fourier transfer infrared (FTIR) spectra revealed that the carbon shell is rich of function groups such as -OH and -COOH. The as-prepared Ag@C core-shell structure can offer favorable microenvironment for immobilizing glucose oxidase and the direct electrochemistry process of glucose oxidase (GOD) at Ag@C modified glassy carbon electrode (GCE) was realized. The modified electrode exhibited good response to glucose. Under optimum experimental conditions the biosensor linearly responded to glucose concentration in the range of 0.05-2.5mM, with a detection limit of 0.02mM (S/N=3). The apparent Michaelis-Menten constant (KM(app)) of the biosensor is calculated to be 1.7mM, suggesting high enzymatic activity and affinity toward glucose. In addition, the GOD-Ag@C/Nafion/GCE shows good reproducibility and long-term stability. These results suggested that core-shell structured Ag@C is an ideal matrix for the immobilization of the redox enzymes and further the construction of the sensitive enzyme biosensor.

Glucose sensing by a glassy carbon electrode modified with glucose oxidase and a magnetic polymeric nanocomposite

Glucose sensing by using of glucose oxidase and a biocompatible poly(p-phenylenediamine)-based nanocomposite.

Voltammetric detection of anti-HIV replication drug based on novel nanocomposite gold-nanoparticle-CaCO3 hybrid material

A novel bionanocomposite, horse radish peroxidase- gold-nanoparticle-Calcium carbonate (HRP-AuNPs-CaCO3), hybrid material was encapsulated by silica sol on a glassy carbon electrode (GCE). The fabricated modified electrode was used as a novel voltammetric sensor for electrochemical sensing of anti-HIV replication drug i.e. deferiprone. The surface morphology of the modified electrode was characterized by scanning electron microscopy (SEM). Results obtained from the voltammetric measurements show that HRP-AuNPs-CaCO3 modified GCE offers a selective and sensitive electrochemical sensor for the determination of deferiprone. Under experimental conditions, the proposed voltammetric sensor has a linear response range from 0.01 to 10,000 μM with a detection limit of 0.01 μM. Furthermore, the fabricated sensor was successfully applied to determine deferiprone level in spiked urine and serum samples.