Synthesis, structure, thermal stability, mechanical and antibacterial behaviour of lanthanum (La3+) substitutions in β-tricalciumphosphate

Experimental toothpastes containing β-TCP nanoparticles functionalized with fluoride and tin to prevent Erosive Tooth Wear

OBJECTIVES

The present study aimed to synthesize toothpastes containing Beta- TriCalcium Phosphate (β-TCP) nanoparticles, functionalized with fluoride and tin, and test their ability to reduce erosive tooth wear (ETW).

METHODS

Toothpastes were synthesized with the following active ingredients: 1100 ppm of fluoride (as sodium fluoride, F-), 3500 ppm of tin (as stannous chloride, Sn2+), and 800 ppm of β-TCP (Sizes a - 20 nm; and b - 100 nm). Enamel specimens were randomly assigned into the following groups (n = 10): 1. Commercial toothpaste; 2. Placebo; 3 F-; 4. F- + β-TCPa; 5. F- + β-TCPb; 6. F- + Sn2+; 7. F- + Sn2+ + β-TCPa and 8. F- + Sn2+ + β-TCPb. Specimens were subjected to erosion-abrasion cycling. Surface loss (in µm) was measured by optical profilometry. Toothpastes pH and available F- were also assessed.

RESULTS

Brushing with placebo toothpaste resulted in higher surface loss than brushing with F- (p = 0.005) and F- + β-TCPb (p = 0.007); however, there was no difference between F- and F- + β-TCPb (p = 1.00). Commercial toothpaste showed no difference from Placebo (p = 0.279). The groups F-, F- + β-TCPa, F- + β-TCPb, F- + Sn2+, F- + Sn2+ + β-TCPa and F- + Sn2+ + β-TCPb were not different from the commercial toothpaste (p > 0.05). Overall, the addition of β-TCP reduced the amount of available fluoride in the experimental toothpastes. The pH of toothpastes ranged from 4.97 to 6.49.

CONCLUSIONS

Although toothpaste containing β-TCP nanoparticles protected enamel against dental erosion-abrasion, this effect was not superior to the standard fluoride toothpaste (commercial). In addition, the functionalization of β-TCP nanoparticles with fluoride and tin did not enhance their protective effect.

CLINICAL SIGNIFICANCE

Although β-TCP nanoparticles have some potential to control Erosive Tooth Wear, their incorporation into an experimental toothpaste appears to have a protective effect that is similar to a commercial fluoride toothpaste.

Enhancing the zircon yield through the addition of calcium phosphates into ZrO2-SiO2 binary systems: synthesis and structural, morphological, mechanical and in vitro analysis

The crystallization of ZrSiO4 is generally accomplished by the addition of mineralizers into ZrO2-SiO2 binary oxides. The current investigation aimed to investigate the effect of adding calcium phosphates into ZrO2-SiO2 binary oxides on the yield of ZrSiO4. The concentration of calcium phosphate additions were varied to obtain ZrSiO4 that fetches improved mechanical and biological properties for application in hard tissue replacements. The findings highlight the significant role of Ca2+ and P5+ in triggering the ZrSiO4 formation via their accommodation at the Zr4+ and Si4+ sites. Especially, calcium phosphate additions trigger the t- → m-ZrO2 transition beyond 1000 °C, which consequently reacts with SiO2 to promote ZrSiO4 formation. Calcium phosphates are accommodated at the lattice sites of ZrSiO4 with a maximum limit of 20 mol%, beyond which the crystallization of β-Ca3(PO4)2 is noticed. The optimum amount of 20 mol% of calcium phosphates displayed a better strength than that of all the investigated specimens. More than 80% of cell viability in MG-63 cells was invariably determined in all the calcium phosphate-added ZrSiO4 systems.

Bioactive Chitosan-Based Organometallic Scaffolds for Tissue Engineering and Regeneration

Captivating achievements in developing advanced hybrid biostructures through integrating natural biopolymers with inorganic materials (e.g., metals and metalloids) have paved the way towards the application of bioactive organometallic scaffolds (OMSs) in tissue engineering and regenerative medicine (TERM). Of various biopolymers, chitosan (CS) has been used widely for the development of bioactive OMSs, in large part due to its unique characteristics (e.g., biocompatibility, biodegradability, surface chemistry, and functionalization potential). In integration with inorganic elements, CS has been used to engineer advanced biomimetic matrices to accommodate both embedded cells and drug molecules and serve as scaffolds in TERM. The use of the CS-based OMSs is envisioned to provide a new pragmatic potential in TERM and even in precision medicine. In this review, we aim to elaborate on recent achievements in a variety of CS/metal, CS/metalloid hybrid scaffolds, and discuss their applications in TERM. We also provide comprehensive insights into the formulation, surface modification, characterization, biocompatibility, and cytotoxicity of different types of CS-based OMSs.

Design and structural investigations of Yb3+ substituted β-Ca3(PO4)2 contrast agents for bimodal NIR luminescence and X-ray CT imaging

The quest for the development of bone substitutes with contrast agents for diagnostic imaging subsists to distinguish synthetic bone from native human tissue. To this aim, ytterbium (Yb³⁺) substitutions in β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP) as contrast agents has been developed to differentiate implant materials thereby, facilitating as host for bimodal imaging application by means of NIR luminescence and X-ray computed tomography techniques. A facile aqueous chemical precipitation route with the aid of surfactant is used for the synthesis of Yb³⁺ substitutions in β-Ca₃(PO₄)₂. The characterization results affirms the ability of β-Ca₃(PO₄)₂ to host 4.36 mol% of Yb³⁺ while the excess Yb³⁺ crystallizes as YbPO₄. The structure refinement results favour the occupancy of Yb³⁺ at the Ca²⁺(5) site of β-Ca₃(PO₄)₂. The absorption and photoluminescence spectra in the near infrared region with emission intensity ~1024 nm in the second biological window correspond to ²F_5/2 → ²F_7/2 transitions of Yb³⁺. The designed Yb³⁺ substituted β-Ca₃(PO₄)₂ does not exhibit any toxicity in human osteosarcoma cell lines and delivers an excellent in vitro CT contrast ability allied by the enhanced signal intensity and high X-ray absorption coefficient.

Ionic Substitutions in Non-Apatitic Calcium Phosphates

Calcium phosphate materials (CaPs) are similar to inorganic part of human mineralized tissues (i.e., bone, enamel, and dentin). Owing to their high biocompatibility, CaPs, mainly hydroxyapatite (HA), have been investigated for their use in various medical applications. One of the most widely used ways to improve the biological and physicochemical properties of HA is ionic substitution with trace ions. Recent developments in bioceramics have already demonstrated that introducing foreign ions is also possible in other CaPs, such as tricalcium phosphates (amorphous as well as α and β crystalline forms) and brushite. The purpose of this paper is to review recent achievements in the field of non-apatitic CaPs substituted with various ions. Particular attention will be focused on tricalcium phosphates (TCP) and "additives" such as magnesium, zinc, strontium, and silicate ions, all of which have been widely investigated thanks to their important biological role. This review also highlights some of the potential biomedical applications of non-apatitic substituted CaPs.

Influences of LaCl3 on the mineral phase transformation during osteoblast mineralization in vitro

Rat calvarial osteoblasts were treated with lanthanum chloride (LaCl₃) to explore its effect on the mineral crystalline phase during the process of osteoblast calcification in vitro. The results confirmed that La was readily deposited in the mineral component of the matrix. Employing high-resolution transmission electron microscopy and Fourier transform infrared microspectroscopy techniques, we demonstrated that features comparable to dicalcium phosphate dihydrate (DCPD) and octacalcium phosphate, and hydroxyapatite (HAP) were detected in the mineral phases in vitro. Particularly, LaCl₃ treatment retarded conversion from DCPD-like phase into HAP during mineralization. In addition, La was introduced in DCPD powder during wet chemical synthesis. When compared with that of La-free DCPD, the dissolution rate of La-incorporated DCPD was lower, thereby leading to a delayed DCPD-to-HAP phase transformation. Thus, it can be concluded that LaCl₃ treatment influences the kinetics of inorganic phase transition by decreasing the dissolution rate of DCPD.

Substitutional limit of gadolinium in β-tricalcium phosphate and its magnetic resonance imaging characteristics

To compensate the limitations of bone tissue magnetic resonance imaging (MRI), a series of gadolinium (Gd³⁺ ) substituted β-Tricalcium phosphate [β-TCP, β-Ca₃ (PO₄ )₂ ] were developed. All the powders were characterized using XRD, Raman spectroscopy, Rietveld refinement of the XRD data and the studies confirmed the Gd³⁺ occupancy at Ca²⁺ (1), Ca²⁺ (2) and Ca²⁺ (3) lattice sites of β-Ca₃ (PO₄ )_2. HR-TEM analysis revealed the spherical nature of particles with diameter about 100 nm. The Gd³⁺ doped β-Ca₃ (PO₄ )₂ exhibited non-toxic behaviour to MG-63 cells in vitro and the room temperature magnetic field versus magnetization measurements confirmed its paramagnetic behaviour. MRI analysis revelas that it shorten both T₁ and T₂ proton relaxation times, thus influencing both r₁ and r₂ relaxivity values that reach 61.97 mM^-1 s^-1 and 73.35 mM^-1 s^-1 . © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2545-2552, 2017.

Monophasic ß-TCP vs. biphasic HA/ß-TCP in two-stage sinus floor augmentation procedures - a prospective randomized clinical trial

OBJECTIVES

To compare a monophasic (100% ß-TCP) and a biphasic (60% HA and 40% ß-TCP) bone substitute material (BSM) regarding biocompatibility, osteoconductivity and implant stability using histological, radiological and resonance frequency analysis.

MATERIAL AND METHODS

Sixty-seven sinus floor elevations were performed in 60 patients. One patient group (monophasic bone substitute [MBS], 30 patients, 32 sinuses) was augmented by the use of the monophasic material (Bioresorb^® , Sybron Implant Solutions, Bremen, Germany), while the second group (biphasic bone substitute (BBS), 30 patients, 35 sinuses) received a biphasic material (Maxresorb^® , Botiss Biomaterials, Berlin, Germany). Cone beam CT images were taken immediately after augmentation and prior to implant placement after 6 months. Trephines were harvested, while the implant bed was prepared. Resonance frequency analysis was performed immediately after implant placement and 6 months later. Descriptive analysis was performed on all augmented sinus (n = 67). For statistical comparison of the groups, one sinus of each bilaterally treated patient was randomly excluded, resulting in 30 sinuses grafted with MBS and 30 sinuses grafted with BBS (n = 60).

RESULTS

Histomorphometrical analysis of all sinuses displayed comparable results for both groups regarding new bone matrix (MBS 36.16 ± 19.37%, BBS 38.42 ± 12.61%), residual BSM (MBS 30.26 ± 11.7%, BBS 32.66 ± 12.57%) and non-mineralized tissue (MBS 34.29 ± 18.32%, BBS 28.92 ± 15.04) %) (P > 0.05, respectively). Radiological volume of BBS was significantly more stable (volume loss of 22.2% for MBS, 6.66% for BBS; P < 0.001), and homogeneity of the graft after 6 months was higher for BBS than that for MBS (P < 0.05). Resonance frequency analysis endorsed a higher implant stability quotient for BBS after 6 months than that for MBS (MBS 78.31 ± 5.81, BBS 80.42 ± 6.31; P < 0.05, Mann-Whitney U-test, respectively).

CONCLUSION

Both monophasic and biphasic materials show good biocompatibility and osteoconductivity with satisfactory support on implant stability. BBS remains more stable in terms of volume maintenance and radiological graft homogeneity after a healing period of 6 months.

Preferential occupancy of strontium in the hydroxyapatite lattice in biphasic mixtures formed from non-stoichiometric calcium apatites

Hydroxyapatite unit cell reflecting the preferential occupancy of Sr²⁺ at Ca²⁺ (2) site. Crystal framework represents bonding and orientation of PO₄³⁻ with Ca²⁺ and Sr²⁺ and their relative OH⁻ bonding, which proposes the thermodynamically stable configuration.