Antibacterial action of doped CoFe2O4 nanocrystals on multidrug resistant bacterial strains

Impact of silver substitution on the structural, magnetic, optical, and antibacterial properties of cobalt ferrite

Silver-doped Cobalt Ferrite nanoparticles AgxCo1-xFe2O4 with concentrations (x = 0, 0.05, 0.1, 0.15) have been prepared using a hydrothermal technique. The XRD pattern confirms the formation of the spinel phase of CoFe2O4 and the presence of Ag ions in the spinel structure. The spinel phase AgxCo1-xFe2O4 nanoparticles are confirmed by FTIR analysis by the major bands formed at 874 and 651 cm-1, which represent the tetrahedral and octahedral sites. The analysis of optical properties reveals an increase in band gap energy with increasing concentration of the dopant. The energy band gap values depicted for prepared nanoparticles with concentrations x = 0, 0.05, 0.1, 0.15 are 3.58 eV, 3.08 eV, 2.93 eV, and 2.84 eV respectively. Replacement of the Co2+ ion with the nonmagnetic Ag2+ ion causes a change in saturation magnetization, with Ms values of 48.36, 29.06, 40.69, and 45.85 emu/g being recorded. The CoFe2O4 and Ag2+ CoFe2O4 nanoparticles were found to be effective against the Acinetobacter Lwoffii and Moraxella species, with a high inhibition zone value of x = 0.15 and 8 × 8 cm against bacteria. It is suggested that, by the above results, the synthesized material is suitable for memory storage devices and antibacterial activity.

Synthesis and Characterization of Cobalt-Doped Ferrites for Biomedical Applications

Novel materials for biomedical applications are in critical need of time. In the present work, the antibacterial properties of Co_1-x Ni _x Mg _x Fe₂O₄ nanoparticles (NPs) are assessed by the disc diffusion method for the common pathogen, that is, Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. Overnight grown bacterial cultures were individually lawn-cultured on nutrient agar plates. All samples of NP concentrations (2 mg/mL) were prepared in sterile water and dispensed by sonication. Sterile filter paper discs (1.0 mm) were saturated by the (doped CoFe₂O₄) NP solution and incubated at 37 ± 0.1 °C for 24 h. The NPs with a fine size of 30-70 nm of Co_1-x Ni _x Mg _x Fe₂O₄ were achieved using the sol-gel method by doping CoFe₂O₄ initially with Ni and codoping with Mg, and their properties were studied by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared techniques. According to the results, Co_0.5Ni_0.25Mg_0.25Fe₂O₄ NPs exhibited potent antibacterial activities against s. aureus having an inhibition zone of 6.5 mm and P. aeruginosa having an inhibition zone of 6 mm as that were examined. The result shows that the bacteriostatic properties of NPs are used for numerous applications such as hyperthermia, antibacterial treatments, and targeted drug delivery.

Surface modified iron-oxide based engineered nanomaterials for hyperthermia therapy of cancer cells

Magnetic hyperthermia is emerging as a promising alternative to the currently available cancer treatment modalities. Superparamagnetic iron-oxide nanoparticles (SPIONs) are extensively studied functional nanomaterials for biomedical applications, owing to their tunable physio-chemical properties and magnetic properties. Out of various ferrite classes, spinel and inverse-spinel ferrites are widely used but are affected by particle size distribution, particle shape, particle-particle interaction, geometry, and crystallinity. Notably, their heating ability makes them suitable candidates for heat-mediated cancer cell ablation or hyperthermia therapy. Exposing SPIONs to an externally applied magnetic field of appropriate frequency and intensity causes them to release heat to ablate cancer cells. Majorly, three heating mechanisms are exhibited by magnetic nanomaterials: Nèel relaxation, Brownian relaxation, and hysteresis losses. In SPIONs, Nèel and Brownian relaxations dominate, whereas hysteric losses are negligible. These nanomaterials possess high magnetization values capable of generating heat to ablate cancer cells. Furthermore, surface functionalization of these materials imparts the ability to selectively target cancer cells and deliver cargo to the affected area sparing the normal body cells. The surface of nanoparticles can be functionalized with various physical, chemical, and biological coatings. Moreover, hyperthermia can be applied in combination with other cancer treatment modalities in order to enhance the efficiency of treatment.

Tannin-Bridged Magnetic Responsive Multifunctional Hydrogel for Enhanced Wound Healing by Mechanical Stimulation Induced Early Vascularization

Wound healing is a complex process. Wound repair material requires multiple functionalities, such as anti-inflammatory, antibacterial, angiogenesis, pro-proliferation, and remodeling. To achieve rapid tissue regeneration, magnetic field-assisted therapy has become...

Cobalt ferrite nanoparticles supported on reduced graphene oxide sheets: optical, magnetic and magneto-antibacterial studies

The development of antibacterial nanomaterials has emerged as a strategy to control bacterial activity, due to the growth and spread of antibiotic-resistant pathogen microorganisms. Graphene-based nanocarbons, as one of the most attractive materials, given their extraordinary physical and chemical properties, are promising candidate nanomaterials for biomedical applications. In this study, cobalt ferrite nanoparticles (NPs) supported on reduced graphene oxide (rGO) sheets to form metal nanocomposites (MNCs) known as CoFe₂O₄@rGO MNCs with different rGO contents (0, 10, 25 and 40 wt%) have been synthesized by a one-step process. The structures, morphology, optical, magnetic and antibacterial properties of the CoFe₂O₄@rGO were investigated by x-ray diffraction patterns, scanning electron microscopy and transmission electron microscopy images, Raman, Fourier transform infrared (FTIR) and UV-Vis spectroscopies, vibration sample magnetometry and antibacterial tests as a function of rGO content. The particle sizes of the CoFe₂O₄ NPs supported on the different rGO contents were below 10 nm. The band gap energy of the samples decreased from about 3.1 to 1.7 eV with reducing rGO content. The results prove the effective reduction of graphene oxide to rGO and also the support of CoFe₂O₄ on rGO sheets by a one-step hydrothermal reaction. The increase in rGO content in the samples reduced their saturated magnetization from about 15 to 7 emu g^-1. The CoFe₂O₄@rGO MNCs have shown magneto-antibacterial activity against gram-negative bacteria (Escherichia coli), whose efficacy depends on the value of the rGO content. In contrast, the CoFe₂O₄@rGO MNC (25 wt% rGO) which was synthesized by the one-step hydrothermal method not only has a narrow band gap energy (for photocatalytic applications), but also significant magneto-antibacterial activity was observed.

Design and characterization of a novel pH-sensitive biocompatible and multifunctional nanocarrier for in vitro paclitaxel release

Breast cancer is one of the main reasons of women's mortality. A novel ternary combination of ZnAl-layered double hydroxides (LDH), cobalt ferrite (CoFe₂O₄) and N-graphene quantum dots (N-GQDs) proposes a pH-sensitive multifunctional nanocomposite that can improve therapeutic features of each compound; this is a notable strategy to make biocompatible materials with unique properties for paclitaxel (PTX) delivery in breast cancer cells. For proving the surface modification process of materials, electrochemical techniques including cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were carried out. By coating PEG on the surface of the N-GQDs/CoFe₂O₄/LDH, it developed a drug delivery system with low toxicity, an excellent encapsulation efficiency 88.4%, drug loading capacity of ca. 31%, and slow and sustained release behavior (9% after 72 h) under normal physiological conditions. Besides, a high drug release (~69%) at low-pH as a model of the extracellular tumor environment indicated a pH-sensitive release behavior. Moreover, cell viability assay proved the negligible cytotoxicity on normal cells (L929) and the improved growth inhibition effect of PTX/N-GQDs/CoFe₂O₄/LDH nanocarrier on MCF7 cancer cells. Blood compatibility test values with respect to red blood cell aggregation (RBC), coagulation prothrombin time (PT), activated partial thromboplastin time (APTT), and complement activation (C3 and C4 levels) remained within normal ranges without toxicity effect on RBCs and complement factors. Overall, this novel designed PTX/N-GQDs/CoFe₂O₄/LDH nanocarrier with tremendously biocompatible, slow-release and pH-dependent features could be considered as a theranostic candidate for various anticancer drugs delivery and cancer therapy.

Spinel ferrite (AFe2O4)-based heterostructured designs for lithium-ion battery, environmental monitoring, and biomedical applications

The development of spinel ferrite nanomaterial (SFN)-based hybrid architectures has become more popular owing to the fascinating physicochemical properties of SFNs, such as their good electro-optical and catalytic properties, high chemothermal stability, ease of functionalization, and superparamagnetic behaviour. Furthermore, achieving the perfect combination of SFNs and different nanomaterials has promised to open up many unique synergistic effects and advantages. Inspired by the above-mentioned noteworthy properties, numerous and varied applications have been recently developed, such as energy storage in lithium-ion batteries, environmental pollutant monitoring, and, especially, biomedical applications. In this review, recent development efforts relating to SFN-based hybrid designs are described in detail and logically, classified according to 4 major hybrid structures: SFNs/carbonaceous nanomaterials; SFNs/metal–metal oxides; SFNs/MS₂; and SFNs/other materials. The underlying advantages of the additional interactions and combinations of effects, compared to the standalone components, and the potential uses have been analyzed and assessed for each hybrid structure in relation to lithium-ion battery, environmental, and biomedical applications.

We have summarized recent developments in SFN-based hybrid designs. The additional interactions, combination effects, and important changes have been analyzed and assessed for LIB, environmental monitoring, and biomedical applications.

Pitfalls and Challenges in Nanotoxicology: A Case of Cobalt Ferrite (CoFe2O4) Nanocomposites

Nanotechnology is developing at a rapid pace with promises of a brilliant socio-economic future. The apprehensions of vivid future involvement with nanotechnology make nanoobjects ubiquitous in the macroscopic world of humans. Nanotechnology helps us to visualize the new mysterious horizons in engineering, sophisticated electronics, environmental remediation, biosensing, and nanomedicine. In all these hotspots, cobalt ferrite (CoFe) nanoparticles (NPs) are outstanding contestants because of their astonishing controllable physicochemical and magnetic properties with ease of synthesis methods. The extensive use of CoFe NPs may result in CoFe NPs easily penetrating the human body unintentionally by ingestion, inhalation, adsorption, etc. and intentionally being instilled into the human body during biomedical diagnostics and treatment. After being housed in the human body, it might induce oxidative stress, cytotoxicity, genotoxicity, inflammation, apoptosis, and developmental, metabolic and hormonal abnormalities. In this review, we compiled the toxicity knowledge of CoFe NPs aimed to provide the safe usage of this breed of nanomaterials.