Novel two-step method to form silk fibroin fibrous hydrogel

From silk components to emulsions

This review is the first to offer a comprehensive exploration of the complex interplay between silk polymorphism, its unique self-assembly properties, and its versatility in forming various silk-based emulsions, with a particular emphasis on the interfacial dynamics at oil/water interfaces. Silk demonstrates remarkable potential as a stabilizing agent through diverse stabilization mechanisms, resulting in the formation of distinct emulsion types. Three primary classes of silk-based emulsions are highlighted: (1) Film-stabilized emulsions, where silk in solution forms an elastic, gel-like 2D film at the oil/water interface; (2) Pickering emulsions, achieved by the adsorption of silk nano-assemblies onto oil droplets; and (3) Emulsion-filled gels, where oil droplets are encapsulated within a gel network using silk's inherent gelling properties. Additionally, the interfacial behaviour of silk-encompassing interfacial rheology and conformational changes-at the oil/water interface is discussed. A detailed analysis of the mechanisms driving silk self-assembly, along with the factors influencing this process, is also provided. The complexity of silk's self-assembly adds significant challenges to the classification of silk-based emulsions and a thorough understanding of their stabilizing mechanisms. Finally, this review addresses existing knowledge gaps and offers potential future directions for advancing research in this area.

Extracellular Matrix-Mimetic Intrinsic Versatile Coating Derived from Marine Adhesive Protein Promotes Diabetic Wound Healing through Regulating the Microenvironment

The management of diabetic wound healing remains a severe clinical challenge due to the complicated wound microenvironments, including abnormal immune regulation, excessive reactive oxygen species (ROS), and repeated bacterial infections. Herein, we report an extracellular matrix (ECM)-mimetic coating derived from scallop byssal protein (Sbp9Δ), which can be assembled in situ within 30 min under the trigger of Ca2+ driven by strong coordination interaction. The biocompatible Sbp9Δ coating and genetically programmable LL37-fused coating exhibit outstanding antioxidant, antibacterial, and immune regulatory properties in vitro. Proof-of-concept applications demonstrate that the coating can reliably promote wound healing in animal models, including diabetic mice and rabbits, ex vivo human skins, and Staphylococcus aureus-infected diabetic mice. In-depth mechanism investigation indicates that improved wound microenvironments accelerated wound repair, including alleviated bacterial infection, lessened inflammation, appearance of abundant M2-type macrophages, removal of ROS, promoted angiogenesis, and re-epithelialization. Collectively, our investigation provides an in situ, convenient, and effective approach for diabetic wound repair.

Separable and Inseparable Silk Fibroin Microneedles for the Transdermal Delivery of Colchicine: Development, Characterization, and Comparisons

Colchicine is the first-line option for both the treatment and prophylaxis of gout flares. However, due to potentially severe side effects, the clinical use of colchicine is limited. A well-tolerated and safe delivery system for colchicine is widely desired. For this purpose, colchicine-loaded inseparable microneedles were fabricated using silk fibroin. Additionally, separable microneedles made of silk fibroin as the needle tips and PVP K30 as the base material were developed. Both types of microneedles were evaluated for their mechanical strength, swelling and dissolution characteristics, insertion abilities, degradation properties, in vitro penetration, skin irritation, and in vivo anti-gout effects. The results demonstrated that separable microneedles had greater mechanical strength and insertion ability. Moreover, the separable microneedles separated quickly and caused little skin irritation. In the pharmacodynamic test, mice with acute gouty arthritis responded significantly to treatment with separable microneedles. In conclusion, the separable silk fibroin-based microneedles provide a promising route for colchicine delivery.

Hydrogelation of Regenerated Silk Fibroin via Gamma Irradiation

Gamma irradiation, which is one of the more conventional sterilization methods, was used to induce the hydrogelation of silk fibroin in this study. The physical and chemical characteristics of the irradiation-induced silk fibroin hydrogels were investigated. Silk fibroin solution with a concentration greater than 1 wt% formed hydrogel when irradiated by gamma rays at a dose of 25 or 50 kGy. The hydrogel induced by 50 kGy of radiation was more thermally stable at 80 °C than those induced by 25 kGy of radiation. When compared to the spontaneously formed hydrogels, the irradiated hydrogels contained a greater fraction of random coils and a lower fraction of β-sheets. This finding implies that gelation via gamma irradiation occurs via other processes, in addition to crystalline β-sheet formation, which is a well-established mechanism. Our observation suggests that crosslinking and chain scission via gamma irradiation could occur in parallel with the β-sheet formation. The irradiation-induced hydrogels were obtained when the solution concentration was adequate to support the radiation crosslinking of the silk fibroin chains. This work has, therefore, demonstrated that gamma irradiation can be employed as an alternative method to produce chemical-free, random coil-rich, and sterilized silk fibroin hydrogels for biomedical applications.

Preparation and Characterization of Natural Silk Fibroin Hydrogel for Protein Drug Delivery

In recent years, hydrogels have been widely used as drug carriers, especially in the area of protein delivery. The natural silk fibroin produced from cocoons of the Bombyx mori silkworm possesses excellent biocompatibility, significant bioactivity, and biodegradability. Therefore, silk fibroin-based hydrogels are arousing widespread interest in biomedical research. In this study, a process for extracting natural silk fibroin from raw silk textile yarns was established, and three aqueous solutions of silk fibroin with different molecular weight distributions were successfully prepared by controlling the degumming time. Silk fibroin was dispersed in the aqueous solution as “spherical” aggregate particles, and the smaller particles continuously accumulated into large particles. Finally, a silk fibroin hydrogel network was formed. A rheological analysis showed that as the concentration of the silk fibroin hydrogel increased its storage modulus increased significantly. The degradation behavior of silk fibroin hydrogel in different media verified its excellent stability, and the prepared silk fibroin hydrogel had good biocompatibility and an excellent drug-loading capacity. After the protein model drug BSA was loaded, the cumulative drug release within 12 h reached 80%. We hope that these investigations will promote the potential utilities of silk fibroin hydrogels in clinical medicine.

Manufacturing of self-standing multi-layered 3D-bioprinted alginate-hyaluronate constructs by controlling the cross-linking mechanisms for tissue engineering applications

3D bioprinting of self-supporting stable tissue and organ structure is critically important in extrusion-based bioprinting system, especially for tissue engineering and regenerative medicine applications. However, the development of self-standing bioinks with desired crosslinking density, biocompatibility, tunable mechanical strength and other properties like self-healing, in situ gelation, drug or protein incorporation is still a challenge. In this study, we report a hydrogel bioink prepared from alginate (Alg) and hyaluronic acid (HA) crosslinked through multiple crosslinking mechanisms, i.e., acyl-hydrazone, hydrazide interactions and calcium ions. These Alg-HA gels were highly dynamic and shear-thinning with exceptional biocompatibility and tunable mechanical properties. The increased dynamic nature of the gels is mainly chemically attributed to the presence of acyl-hydrazone bonds formed between the amine groups of the acyl-hydrazide of alginate and the monoaldehyde of the hyaluronic acid. Among the different combinations of Alg-HA gel compositions prepared, the A5H5 (Alginate-acyl-hydrazide: HA-monoaldehyde, ratio 50:50) one showed a gelation time of ~60 s, viscosity of ~400 Pa.s (at zero shear rate), high stability in various pH solutions and increased degradation time (>50 days) than the other samples. The A5H5 gels showed high printability with increased post-printing stability as observed from the 3D printed structures (e.g., hollow tube (~100 layers), porous cube (~50 layers), star, heart-in, meniscus and lattice). The scanning electron microscopy analysis of the 3D constructs and hydrogels showed the interconnected pores (~181 µm) and crosslinked networks. Further, the gels showed sustained release of 5-amino salicylic acid and bovine serum albumin. Also, the mechanical properties were tuned by secondary crosslinking via different calcium concentrations. In vitro assays confirmed the cytocompatibility of these gels, where the 3D bioprinted lattice and tubular (~70 layers) constructs demonstrated high cell viability under fluorescence analysis. In in vivo studies, Alg-HA gel showed high biocompatibility (>90%) and increased angiogenesis (3 folds) and reduced macrophage infiltration (2-fold decrease), demonstrating the promising potential of these hydrogels in 3D bioprinting applications for tissue engineering and regenerative medicine with tunable properties.

Bio-inspired hydrogels with fibrous structure: A review on design and biomedical applications

Numerous tissues in the human body have fibrous structures, including the extracellular matrix, muscles, and heart, which perform critical biological functions and have exceptional mechanical strength. Due to their high-water content, softness, biocompatibility and elastic nature, hydrogels resemble biological tissues. Traditional hydrogels, on the other hand, have weak mechanical properties and lack tissue-like fibrous structures, limiting their potential applications. Thus, bio-inspired hydrogels with fibrous architectures have piqued the curiosity of biomedical researchers. Here, we review fabrication strategies for fibrous hydrogels and their recent progress in the biomedical fields of wound dressings, drug delivery, tissue engineering scaffolds and bioadhesives. Challenges and future perspectives are also discussed.

Highly stretchable, self-healing and conductive silk fibroin-based double network gels via a sonication-induced and self-emulsifying green procedure

Regenerated silk fibroin (RSF)-based hydrogels are promising biomedical materials due to their biocompatibility and biodegradability. However, the weak mechanical properties and lack of functionality limit their practical applications. Here, we developed a tough and conductive RSF-based double network (DN) gel, consisting of a sonication-induced β-sheet physically crosslinked RSF/S gel as the first network and a hydrophobically associated polyacrylamide/stearyl methacrylate (PAAm/C18) gel as the second network. In particular, the cross-linking points of the second network were micelles formed by emulsifying the hydrophobic monomer (C18M) with a natural SF- capryl glucoside co-surfactant. The reversible dynamic bonds in the DN provided good self-healing ability and an effective dissipative energy mechanism for the DN hydrogel, while the addition of calcium ions improved the self-healing ability and electrical conductivity of the hydrogel. Under optimal conditions, the RSF/S-PAAm/C18 DN gels exhibited large extensibility (1400%), high tensile strength (0.3 MPa), satisfactory self-healing capability (90%) and electrical conductivity (0.12 S·m-1). The full physically interacted DN hydrogels are expected to be applied in various fields such as tissue engineering, biosensors and artificial electronic skin.

Boron, nitrogen co-doped biomass-derived carbon aerogel embedded nickel-cobalt-iron nanoparticles as a promising electrocatalyst for oxygen evolution reaction

The electrocatalytic performance of oxygen evolution reaction (OER) electrocatalysts is highly reliant on the activity of its catalytic active site, which may be augmented by raising the number of active sites. In this study, nanoscaled nickel-cobalt-iron (NiCoFe) alloy was embedded on conductive boron(B), nitrogen(N) co-doped/biomass-derived carbon aerogel as an OER electrocatalyst. The synthesized electrocatalysts were calcined under different temperatures and with variable dopants. The optimal electrocatalyst (BN/CA-NiCoFe-600) demonstrated a low overpotential of 321 mV (at current density of 10 mA cm^-2) and a minute Tafel slope of 42 mV dec^-1, which was even smaller than that of IrO₂ and RuO₂. Its mass activity and specific activity were calculated to be 201.7 A g^-1, and 34.1 cm^-2_ECSA, respectively. Furthermore, the electrocatalyst showed excellent stability and durability. This work provides an easy and practical synthetic strategy for acquiring very active and durable electrocatalysts for OER.

Liquid-type nonthermal atmospheric plasma enhanced regenerative potential of silk-fibrin composite gel in radiation-induced wound failure

Delayed wound healing in heavily irradiated areas is a serious clinical complication that makes widespread therapeutic use of radiation difficult. Efficient treatment strategies are urgently required for addressing radiation-induced wound failure. Herein, we applied liquid-type nonthermal atmospheric plasma (LTP) to a silk-fibrin (SF) composite gel to investigate whether controlled release of LTP from SF hydrogel not only induced favorable cellular events in an irradiated wound bed but also modulated the SF hydrogel microstructure itself, eventually facilitating the development of a regenerative microenvironment. Scanning electron microscopy and Fourier-transform infrared spectroscopy revealed that LTP modulated the microstructures and chemical bindings of the SF gel. Improved cell viability, morphology, and extracellular matrix depositions by the LTP-treated SF hydrogel were identified with wound-healing assays and immunofluorescence staining. An irradiated random-pattern skin-flap animal model was established in six-week-old C57/BL6 mice. Full-thickness skin was flapped from the dorsum and SF hydrogel was placed underneath the raised skin flap. Postoperative histological analysis of the irradiated random-pattern skin-flap mice model suggested that LTP-treated SF hydrogel much improved wound regeneration and the inflammatory response compared to the SF hydrogel- and sham-treated groups. These results support that LTP-treated SF hydrogel significantly enhanced irradiated wound healing. Cellular and tissue reactions to released LTP from the SF hydrogel were favorable for the regenerative process of the wound; furthermore, mechanochemical properties of the SF gel were improved by LTP.

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together with a novel self-reinforced silk granular hydrogel composed of 10 wt% 20 kDa poly(ethylene glycol) dimethacrylate microgels and regenerated silk fibroin fibers. The principle is to use the swelling of microgels to concentrate the surrounding solution and regenerate silk fibroin in situ. Self-reinforcement is subsequently one of the added functions. We showed that silk fibroin in most compositions was homogeneously distributed and had successfully regenerated in situ around microgels, holding them together in a network-like structure. FTIR analysis revealed the presence of amorphous and crystalline silk fibroin, where 50% of the secondary structures could be assigned to strong β-sheets. Swelling ratios, i.e. 10-45 vol%, increased proportionally with the microgel content, suggesting that mainly microgels governed swelling. In contrast, the elastic modulus, i.e. 58-296 kPa, increased almost linearly with silk fibroin content. Moreover, we showed that the precursor could be injected and cast into a given shape. Viscous precursors of various compositions were also placed side by side to create mechanical gradients. Finally, it was demonstrated that silk granular hydrogel could successfully be synthesized with other microgels like gelatin methacryloyl. Silk granular hydrogels represent, therefore, a novel class of self-reinforced hydrogel structures with tunable swelling and elastic properties.

Processing, mechanical properties and bio-applications of silk fibroin-based high-strength hydrogels

Hydrogels are an attractive class of materials that possess similar structural and functional characteristics to wet biological tissues and demonstrate a diversity of applications in biomedical engineering. Silk fibroin (SF) is a unique natural polymer due to its fibrous protein nature, versatile formats, biocompatibility, tunable biodegradation and is thus a good hydrogel candidate for bio-applications. Compared to synthetic polymer hydrogels, poor mechanical performance is still a fatal drawback that hinders the application of SF hydrogels as structural materials. Researchers have attempted to develop strategies to construct silk fibroin-based high-strength hydrogels (SF-HSHs). Herein, we firstly provide an overview of the approaches of processing SF-HSHs with a focus on the physical/non-covalent crosslinking mechanisms. The examples of SF-HSHs are discussed in detail under four categories, including physical-crosslinked, dual-crosslinked, double network and composite hydrogels respectively. A brief section follows to elucidate on the gelation mechanisms of SF-HSHs before a description of the utility of SF-HSHs in biomedicine and devices is presented. Finally, the potential challenges and future development of SF-HSHs are briefly discussed. This review aims to enhance our understanding of the structure-mechanical property-function relationships of soft materials made from natural polymers and guide future research of silk fibroin-based hydrogels for biomedical applications. STATEMENT OF SIGNIFICANCE: Silk fibroin (SF) extracted from silk fibres is increasingly applied in the biomedical field, and SF hydrogel has been an emerging area for frontier bio-research. Since SF biopolymer has an intrinsic tendency to form regular β-sheet stacks, it can be processed into purely physically crosslinked hydrogels, thus avoiding the use of chemical crosslinkers. Nevertheless, akin to other natural polymers, lab-produced SF is variable (i.e. the molecular weight and distribution), and the gelation of SF hydrogel is challenging to control. In addition, hydrogels made from SF are usually weak and brittle, which hinders the wide use of this biofriendly and biodegradable hydrogel. Recently, there is a pressing need for high strength hydrogels from natural polymers for biomedical applications, and SF is proposed as a strong candidate. Therefore, we have studied the literature in the past 10 years and would like to focus on the gelation mechanism and mechanical strength of SF hydrogels for the review.

Preparation and Biocompatibility Characterization of Silk Fibroin 3D Scaffolds

In this paper, three different mass fractions of sodium carbonate were used for degumming to obtain different degrees of damaged silk fibroin fibers, which were then treated with formic acid to shrink and bond them into 3D scaffolds. The structure and performance of silk fibroin fibers and silk fibroin 3D scaffolds were characterized by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, a differential thermal scanner, a universal materials testing machine, and laser confocal microscopy, and the degradation performance was tested by protease degradation. The results showed that an excessive mass fraction of sodium carbonate would cause partial hydrolysis of fibroin fibers, decrease the mechanical properties of fibroin fiber, increase the surface roughness of fibroin fibers, and make mouse embryonic fibroblasts easier to adhere and grow. Silk fibroin fibers were slightly dissolved, shrunk, and dispersed in formic acid. The mass fraction of sodium carbonate can adjust the enzymatic degradation rate of the silk fibroin 3D scaffolds. With the extension of the degradation time, minerals will be deposited on the surface of the scaffolds. The results show that the silk fibroin 3D scaffolds have biocompatibility, mechanical properties, and degradability, which provides a good material for a barrier biofilm in the future.

Enzyme-Crosslinked Electrospun Fibrous Gelatin Hydrogel for Potential Soft Tissue Engineering

Soft tissue engineering has been seeking ways to mimic the natural extracellular microenvironment that allows cells to migrate and proliferate to regenerate new tissue. Therefore, the reconstruction of soft tissue requires a scaffold possessing the extracellular matrix (ECM)-mimicking fibrous structure and elastic property, which affect the cell functions and tissue regeneration. Herein, an effective method for fabricating nanofibrous hydrogel for soft tissue engineering is demonstrated using gelatin-hydroxyphenylpropionic acid (Gel-HPA) by electrospinning and enzymatic crosslinking. Gel-HPA fibrous hydrogel was prepared by crosslinking the electrospun fibers in ethanol-water solution with an optimized concentration of horseradish peroxidase (HRP) and H2O2. The prepared fibrous hydrogel held the soft and elastic mechanical property of hydrogels and the three-dimensional (3D) fibrous structure of electrospun fibers. It was proven that the hydrogel scaffolds were biocompatible, improving the cellular adhesion, spreading, and proliferation. Moreover, the fibrous hydrogel showed rapid biodegradability and promoted angiogenesis in vivo. Overall, this study represents a novel biomimetic approach to generate Gel-HPA fibrous hydrogel scaffolds which have excellent potential in soft tissue regeneration applications.

Tunable High-Molecular-Weight Silk Fibroin Polypeptide Materials: Fabrication and Self-Assembly Mechanism

Silk fibroin is a multisegment natural protein composed of a heavy (H) chain, a light (L) chain and a P25 glycoprotein chain. Herein, we developed a dialysis separation technique under reducing conditions to break the disulfide bond between the H-chain and L-chain and remove the low-molecular-weight portions of the protein. Thus, a high-molecular-weight silk fibroin polypeptide (HSF) material was obtained. SDS-PAGE electrophoresis showed that the molecular weight of HSF was over 80 kDa, similar to the size of the silk fibroin H-chain. Amino acid analysis result demonstrated that the amino acid composition of HSF was almost identical to that of H-chain composition. Importantly, the HSF material obtained has a high surface activity, which can reduce the surface tension of water to below 20 mN/m; at high temperature and high concentration, it can also form a unique nanofibrous network with a lamellar crystalline structure. HSF can further form a rod-shaped structure in a strong polar environment and become a star-shaped fibrous network in a weak polar environment. When the pH value of HSF solution was adjusted from 6 to 8, a structural transition from a folded crank sheet-like structure with micellar beads to a ring-like fibrous structure was observed. During the conversion of HSF from colloidal particles to nanofibers, its molecular conformation also transformed from random coils to β-sheets. These tunable properties indicate that HSF materials have a wide range of applications in biomedical and green chemistry fields.

Renal Clearable Gold Nanoparticle-Functionalized Silk Film for in vivo Fluorescent Temperature Mapping

Implantable optical sensing devices that can continuously monitor physiological temperature changes hold great potential toward applications in healthcare and medical field. Here, we present a conceptual foundation for the design of biocompatible temperature sensing device by integrating renal clearable luminescent gold nanoparticles (AuNPs) with silk film (AuNPs-SF). We found that the AuNPs display strong temperature dependence in both near-IR fluorescence intensity and lifetime over a large temperature range (10-60°C), with a fluorescence intensity sensitivity of 1.72%/°C and lifetime sensitivity of 0.09 μs/°C. When integrated, the AuNPs with biocompatible silk film are implanted in the dorsal region of mice. The fluorescence imaging of the AuNPs-SF in the body shows a linear relationship between the average fluorescence intensity and temperature. More importantly, <3.68% ID gold are left in the body, and no adverse effect is observed for 8 weeks. This AuNPs-SF can be potentially used as a flexible, biocompatible, and implantable sensing device for in vivo temperature mapping.

Fabrication of Silk Fibroin Fluorescent Nanofibers via Electrospinning

Fluorescent silk fibroin nanofibers were fabricated via electrospinning method with three kinds of fluorescent dyes. Electrospun fluorescent nanofibers showed smooth surfaces and average diameters of 873 ± 135 nm, 835 ± 195 nm, and 925 ± 205 nm, respectively, for silk fibroin-fluorescein sodium, silk fibroin-rhodamine B, and silk fibroin-acridine orange nanofibers containing 2.0 wt% fluorescent dyes. At the same time, the secondary structure of silk fibroin in fluorescent nanofibers was predominantly amorphous conformation without influence by adding different concentrations of fluorescent dyes, as characterized by Fourier transform infrared spectroscopy and X-ray diffraction. Thermal degradation behavior of fluorescent silk fibroin nanofibers with a dramatic decrease in weight residue was observed at around 250 °C. The fluorescence effect of fluorescent silk fibroin nanofibers was changed by changing the concentration of different fluorescent dyes. These fluorescent nanofibers may make promising textile materials for large scale application.

Highly elastomeric photocurable silk hydrogels

A photocurable silk fibroin hydrogel is prepared, for the first time, using natural silk protein fibroin and biophotosensitizer riboflavin. Riboflavin is excited by ultraviolet light to generate a triplet state which is transferred to produce active oxygen radicals with singlet oxygen as the main component. Active oxygen radicals can induce chemical cross-linking of amino-, phenol- and other groups in the silk fibroin macromolecules to form a photocurable hydrogel. The different biophysical characterizations of the gelation of this modified fibroin protein solution were studied by using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, microplate reader and texture analyzer. The aggregate structures, surface morphologies, mechanical properties, light transmission and degradation properties of the gel were studied. The investigations showed that the silk fibroin/riboflavin hydrogels predominantly have random coils or alpha helix structures. These gels show resilience up to 90% after 80% compression and a light transmission of up to 97%. The cell culture experiment exhibits that the hydrogel has a satisfactory cytocompatibility.

Silk fibroin hydrogels from the Colombian silkworm Bombyx mori L: Evaluation of physicochemical properties

Hydrogel scaffolds are important materials in tissue engineering, and their characterization is essential to determine potential biomedical applications according to their mechanical and structural behavior. In this work, silk fibroin hydrogels were synthesized by two different methods (vortex and sonication), and agarose hydrogels were also obtained for comparison purposes. Samples were characterized by scanning electron microscopy, infrared analysis, thermo-gravimetrical analysis, confined compression test, and rheological test. The results indicate that nanofibers can be obtained via both silk fibroin and agarose hydrogels. The mechanical tests showed that the Young's modulus is similar to those found in the literature, with the highest value for agarose hydrogels. All the hydrogels showed a shear-thinning behavior. Additionally, the MTT test revealed that silk fibroin hydrogels had low cytotoxicity in THP-1 and HEK-293 cells, whereas the agarose hydrogels showed high toxicity for the THP-1 cell line. The results indicate that silk fibroin hydrogels obtained from a Colombian silkworm hybrid are suitable for the development of scaffolds, with potential applications in tissue engineering.

Silk Fibroin/Polyvinyl Pyrrolidone Interpenetrating Polymer Network Hydrogels

Silk fibroin hydrogel is an ideal model as biomaterial matrix due to its excellent biocompatibility and used in the field of medical polymer materials. Nevertheless, native fibroin hydrogels show poor transparency and resilience. To settle these drawbacks, an interpenetrating network (IPN) of hydrogels are synthesized with changing ratios of silk fibroin/N-Vinyl-2-pyrrolidonemixtures that crosslink by H₂O₂ and horseradish peroxidase. Interpenetrating polymer network structure can shorten the gel time and the pure fibroin solution gel time for more than a week. This is mainly due to conformation from the random coil to the β-sheet structure changes of fibroin. Moreover, the light transmittance of IPN hydrogel can be as high as more than 97% and maintain a level of 90% within a week. The hydrogel, which mainly consists of random coil, the apertures inside can be up to 200 μm. Elastic modulus increases during the process of gelation. The gel has nearly 95% resilience under the compression of 70% eventually, which is much higher than native fibroin gel. The results suggest that the present IPN hydrogels have excellent mechanical properties and excellent transparency.

A silk fibroin hydrogel with reversible sol–gel transition

Herein, we prepare a novel silk fibroin hydrogel with a reversible thixotropic gel–sol transition triggered by a facile cycled shearing and resting procedure.