Risedronate/zinc-hydroxyapatite based nanomedicine for osteoporosis

Exploring the Biological Impact of β-TCP Surface Polarization on Osteoblast and Osteoclast Activity

β-tricalcium phosphate (β-TCP) is a widely utilized resorbable bone graft material, whose surface charge can be modified by electrical polarization. However, the specific effects of such a charge modification on osteoblast and osteoclast functions remain insufficiently studied. In this work, electrically polarized β-TCP with a high surface charge density was synthesized and evaluated in vitro in terms of its physicochemical properties and biological activity. Polarization was performed to achieve a high surface charge density, which was quantified using a thermally stimulated depolarization current. The proliferation and differentiation of MC3T3-E1 osteoblast-like cells were assessed via WST-8 and alkaline phosphatase assays. Tartrate-resistant acid phosphatase (TRAP) activity and a resorption pit assay were used to evaluate the impact of surface charge on RAW264.7 osteoclast-like cell activity. Polarized β-TCP exhibited a surface charge of 1.3 mC cm-2. Electrically polarized surfaces significantly enhanced osteoblast proliferation and differentiation. TRAP activity assays demonstrated effective osteoclast differentiation of RAW264.7 cells, with enhanced activity observed on charged surfaces. Resorption pit assays further revealed improved osteoclast resorption capacity on β-TCP surfaces with a polarized charge. These findings indicate that β-TCP with a highly dense surface charge promotes osteoblast proliferation and differentiation, as well as osteoclast activity and resorption capacity.

Transdermal delivery of bisphosphonates using dissolving and hydrogel-forming microarray patches: Potential for enhanced treatment of osteoporosis

As of 2023, more than 200 million people worldwide are living with osteoporosis. Oral bisphosphonates (BPs) are the primary treatment but can cause gastrointestinal (GI) side effects, reducing patient compliance. Microarray (MAP) technology has the potential to overcome GI irritation by facilitating the transdermal delivery of BPs. This study examines the delivery of alendronic acid (ALN) and risedronate sodium (RDN) using dissolving and hydrogel-forming MAPs for osteoporosis treatment. In vivo testing on osteoporotic female Sprague Dawley rats demonstrated the efficacy of MAPs, showing significant improvements in mean serum and bone alkaline phosphatase levels, bone volume, and porosity compared to untreated bilateral ovariectomy (OVX) controls. Specifically, MAP treatment increased mean bone volume to 55.04 ± 2.25 % versus 47.16 ± 1.71 % in OVX controls and reduced porosity to 44.30 ± 2.97 % versus 52.84 ± 1.70 % in the distal epiphysis of the femur. In the distal metaphysis, bone volume increased to 43.32 ± 3.24 % in MAP-treated rats compared to 24.31 ± 3.21 % in OVX controls, while porosity decreased to 55.39 ± 5.81 % versus 75.69 ± 3.21 % in OVX controls. This proof-of-concept study indicates that MAP technology has the potential to be a novel, patient-friendly alternative for weekly osteoporosis management.

Targeted delivery of anti-osteoporosis therapy: Bisphosphonate-modified nanosystems and composites

Osteoporosis (OP) constitutes a significant health concern that profoundly affects individuals' quality of life. Bisphosphonates, conventional pharmaceuticals widely employed in OP treatment, encounter limitations related to inadequate drug targeting and a short effective duration, thereby compromising their clinical efficacy. The burgeoning field of nanotechnology has witnessed the development and application of diverse functional nanosystems designed for OP treatment. Owing to the bone tissue affinity of bisphosphonates, these nanosystems are modified to address shortcomings associated with traditional drug delivery. In this review, we explore the potential of bisphosphonate-modified nanosystems as a promising strategy for addressing osteoporotic conditions. With functional modification, these nanosystems exhibit a targeted and reversible effect on osteoporotic remodeling, presenting a promising solution to enhance precision in drug delivery. The synthesis methods, physicochemical properties, and in vitro/in vivo performance of bisphosphonate-modified nanosystems are comprehensively examined in this review. Through a thorough analysis of recent advances and accomplishments in this field, we aim to provide insights into the potential applications and future directions of bisphosphonate-modified nanosystems for targeted and reversible osteoporotic remodeling.

Breaking Osteoclast-Acid Vicious Cycle to Rescue Osteoporosis via an Acid Responsive Organic Framework-Based Neutralizing and Gene Editing Platform

In the osteoporotic microenvironment, the acidic microenvironment generated by excessive osteoclasts not only causes irreversible bone mineral dissolution, but also promotes reactive oxygen species (ROS) production to induce osteoblast senescence and excessive receptor activator of nuclear factor kappa-B ligand (RANKL) production, which help to generate more osteoclasts. Hence, targeting the acidic microenvironment and RANKL production may break this vicious cycle to rescue osteoporosis. To achieve this, an acid-responsive and neutralizing system with high in vivo gene editing capacity is developed by loading sodium bicarbonate (NaHCO3) and RANKL-CRISPR/Cas9 (RC) plasmid in a metal-organic framework. This results showed ZIF8-NaHCO3@Cas9 (ZNC) effective neutralized acidic microenvironment and inhibited ROS production . Surprisingly, nanoparticles loaded with NaHCO3 and plasmids show higher transfection efficiency in the acidic environments as compared to the ones loaded with plasmid only. Finally, micro-CT proves complete reversal of bone volume in ovariectomized mice after ZNC injection into the bone remodeling site. Overall, the newly developed nanoparticles show strong effect in neutralizing the acidic microenvironment to achieve bone protection through promoting osteogenesis and inhibiting osteolysis in a bidirectional manner. This study provides new insights into the treatment of osteoporosis for biomedical and clinical therapies.

Osteoporosis therapy using nanoparticles: a review

Osteoporosis, characterized by low bone density and increased risk of fractures, represents a major healthcare challenge. Anti-resorptive and anabolic medications are now used to treat osteoporosis in an effort to reduce bone loss and increase bone mass. Innovative methods are required since current therapies have drawbacks. Promising options for improving bone health and medicine delivery are provided by nanotechnology. Bisphosphonates with tetracyclines and oligopeptides, among other compounds that target the bone, make it easier to provide a particular medication to bone tissue. Additionally, nanocarriers are essential for the administration of both organic and inorganic nanoparticles in the treatment of osteoporosis. Drug encapsulation and controlled release may be done in a variety of ways using organic nanoparticles. Inorganic nanoparticles have special qualities that help in medication transport and bone repair. This review explores the potential of nanoparticle-based strategies in the treatment of osteoporosis.

Enhancing Osteoporosis Treatment through Targeted Nanoparticle Delivery of Risedronate: In Vivo Evaluation and Bioavailability Enhancement

Risedronate-loaded mPEG-coated hydroxyapatite, thiolated chitosan-based (coated) and non-coated nanoparticles were tested for their potential effects in the treatment of osteoporosis. The prepared nanoparticles were evaluated for their bone-targeting potential by inducing osteoporosis in female Wistar rats via oral administration of Dexona (dexamethasone sodium phosphate). In vivo pharmacokinetic and pharmacodynamic studies were performed on osteoporotic rat models treated with different formulations. The osteoporotic model treated with the prepared nanoparticles indicated a significant effect on bone. The relative bioavailability was enhanced for RIS-HA-TCS-mPEG nanoparticles given orally compared to RIS-HA-TCS, marketed, and API suspension. Biochemical investigations also showed a significant change in biomarker levels, ultimately leading to bone formation/resorption. Micro-CT analysis of bone samples also demonstrated that the RIS-HA-TCS-mPEG-treated group showed the best results compared to other treatment groups. Moreover, the histology of bone treated with RIS-HA-TCS-mPEG showed a marked restoration of the architecture of trabecular bone along with a well-connected bone matrix and narrow inter-trabecular spaces compared to the toxic group. A stability analysis was also carried out according to ICH guidelines (Q1AR2), and it was found that RIS-HA-TCS-mPEG was more stable than RIS-HA-TCS at 25 °C. Thus, the results of present study indicated that mPEG-RIS-HA-TCS has excellent potential for sustained delivery of RIS for the treatment and prevention of osteoporosis, and for minimizing the adverse effects of RIS typically induced via oral administration.

Emerging nano-scale delivery systems for the treatment of osteoporosis

Osteoporosis is a pathological condition characterized by an accelerated bone resorption rate, resulting in decreased bone density and increased susceptibility to fractures, particularly among the elderly population. While conventional treatments for osteoporosis have shown efficacy, they are associated with certain limitations, including limited drug bioavailability, non-specific administration, and the occurrence of adverse effects. In recent years, nanoparticle-based drug delivery systems have emerged as a promising approach for managing osteoporosis. Nanoparticles possess unique physicochemical properties, such as a small size, large surface area-to-volume ratio, and tunable surface characteristics, which enable them to overcome the limitations of conventional therapies. These nanoparticles offer several advantages, including enhanced drug stability, controlled release kinetics, targeted bone tissue delivery, and improved drug bioavailability. This comprehensive review aims to provide insights into the recent advancements in nanoparticle-based therapy for osteoporosis. It elucidates the various types of nanoparticles employed in this context, including silica, polymeric, solid lipid, and metallic nanoparticles, along with their specific processing techniques and inherent properties that render them suitable as potential drug carriers for osteoporosis treatment. Furthermore, this review discusses the challenges and future suggestions associated with the development and translation of nanoparticle drug delivery systems for clinical use. These challenges encompass issues such as scalability, safety assessment, and regulatory considerations. However, despite these challenges, the utilization of nanoparticle-based drug delivery systems holds immense promise in revolutionizing the field of osteoporosis management by enabling more effective and targeted therapies, ultimately leading to improved patient outcomes.

Modulating osteoclasts with nanoparticles: A path for osteoporosis management?

Osteoclasts are the cells responsible for the bone resorption process during bone remodeling. In a healthy situation, this process results from an equilibrium between new matrix formation by osteoblast and matrix resorption by osteoclast. Osteoporosis (OP) is a systemic bone disease characterized by a decreased bone mass density and alterations in bone microarchitecture, increasing fracture predisposition. Despite the variety of available therapies for OP management there is a growing gap in its treatment associated to the low patients´ adherence owing to concerns related with long-term efficacy or safety. This makes the development of new and safe treatments necessary. Among the newly developed strategies, the use of synthetic and natural nanoparticles to modulate osteoclasts differentiation, activity, apoptosis or crosstalk with osteoblasts have arisen. Synthetic nanoparticles exert their therapeutic effect either by loading antiresorptive drugs or including molecules for osteoclasts gene regulation. Moreover, this control over osteoclasts can be improved by their targeting to bone extracellular matrix or osteoclast membranes. Furthermore, natural nanoparticles, also known as extracellular vesicles, have been identified to play a key role in bone homeostasis. Consequently, these systems have been widely studied to control osteoblasts and osteoclasts under variable environments. Additionally, the ability to bioengineer extracellular vesicles has allowed to obtain biomimetic systems with desirable characteristics as drug carriers for osteoclasts. The analyzed information reveals the possibility of modulating osteoclasts by different mechanisms through nanoparticles decreasing bone resorption. These findings suggest that controlling osteoclast activity using nanoparticles has the potential to improve osteoporosis management. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Precision engineering designed phospholipid-tagged pamidronate complex functionalized SNEDDS for the treatment of postmenopausal osteoporosis

Disodium pamidronate, a second-generation bisphosphonate is a potent drug for the treatment of osteoporosis, which has been very well established by previous literature. It has very low oral permeability, leading to its low oral bioavailability, which restrict this drug to being administered orally. Therefore, the present research work includes the development of an orally effective nanoformulation of pamidronate. In this work, disodium pamidronate was complexed with phospholipon 90G for the enhancement of permeability and to investigate the phospholipon 90G-tagged pamidronate complex-loaded SNEDDS for oral delivery with promises of enhanced bioavailability and anti-osteoporotic activity. The rational design and optimization was employed using Central Composite Design (Design Expert^® 12, software) to optimize nanoformulation parameters. In this work, a commercially potential self nano-emulsifying drug delivery system (SNEDDS) has been developed and evaluated for improved oral bioavailability and better clinical acceptance. The hot micro-emulsification and ultracentrifugation method with vortex mixing was utilized for effective tagging of phospholipon 90G with pamidronate and then loading into the SNEDDS nanocarrier. The optimized Pam-PLc SNEDDS formulation was characterized for particle size, PDI, and zeta potential and found to be 56.38 ± 1.37 nm, 0.218 ± 0.113, and 22.41 ± 1.14 respectively. Also, a 37.9% improved bioavailability of pamidronate compared to marketed tablet was observed. Similarly, in vivo pharmacokinetic studies suggest a 31.77% increased bone density and significant enhanced bone biomarkers compared to marketed tablets. The developed formulation is safe and effectively overcomes anti-osteoporosis promises with improved therapeutic potential. This work provides very significant achievements in postmenopausal osteoporosis treatment and may lead to possible use of nanotherapeutic-driven emerging biodegradable carriers-based drug delivery.

Estradiol and zinc-doped nano hydroxyapatite as therapeutic agents in the prevention of osteoporosis; oxidative stress status, inflammation, bone turnover, bone mineral density, and histological alterations in ovariectomized rats

Osteoporosis (OP) is a serious health problem, and the most popular therapeutic strategy for OP is hormone replacement (estrogen); however, it increases the risk of reproductive cancers. Hydroxyapatite (HA) nanoparticles have a similar chemical structure to the bone mineral component and can be used as a new remedy for OP. This study was designed to investigate the osteoporosis-protective potential of nano zinc hydroxyapatite (ZnHA-NPs) and/or estradiol (E2) combined therapy. A total of 35 adult female rats were assigned into five groups (n = 7): 1) control group; 2) ovariectomized group (OVX); 3) OVX received oral estradiol replacement therapy (OVX/E2); 4) OVX received ZnHA replacement therapy (OVX/ZnHA); and 5) OVX received both estradiol and ZnHA-NPs combined therapy (OVX/E2+ZnHA). After 3 months of treatment, serum bone markers and estrogen level, oxidative/antioxidant, and inflammatory cytokines were determined. Additionally, femoral expression of estrogen receptors alpha and beta (ESR1; ESR2), receptor activator of nuclear factor-kappa B (RANKL) ligand, osteoprotegerin (OPG), bone mineral density (BMD), histological alterations, and immunohistochemical expression of vascular endothelial growth factor (VEGF) and proliferating cell nuclear antigen (PCNA) were assessed. ALP, PINP, Ca, and P concentrations improved significantly (p < 0.05) in all treatment groups, especially in the OVX/E + ZnHA group. MDA and NO were higher in OVX rats, while SOD activity and GSH were lower (p < 0.05). E2 alone or with ZnHA-NPs restored the estimated antioxidant molecules and cytokines toward normal levels in OVX rats (p < 0.05). On the other hand, E2 and ZnHA increased OPG and OC expression in femurs while decreasing ESR1, ESR2, and NF-kB expression (p < 0.05). The combination treatment was superior in the restoration of normal femoral histoarchitecture and both cortical and trabecular BMD (p < 0.05). Overall, the combined therapy of OVX/E2+ZnHA was more effective than the individual treatments in attenuating excessive bone turnover and preventing osteoporosis.

Microgravity-Related Changes in Bone Density and Treatment Options: A Systematic Review

Space travelers are exposed to microgravity (µg), which induces enhanced bone loss compared to the age-related bone loss on Earth. Microgravity promotes an increased bone turnover, and this obstructs space exploration. This bone loss can be slowed down by exercise on treadmills or resistive apparatus. The objective of this systematic review is to provide a current overview of the state of the art of the field of bone loss in space and possible treatment options thereof. A total of 482 unique studies were searched through PubMed and Scopus, and 37 studies met the eligibility criteria. The studies showed that, despite increased bone formation during µg, the increase in bone resorption was greater. Different types of exercise and pharmacological treatments with bisphosphonates, RANKL antibody (receptor activator of nuclear factor κβ ligand antibody), proteasome inhibitor, pan-caspase inhibitor, and interleukin-6 monoclonal antibody decrease bone resorption and promote bone formation. Additionally, recombinant irisin, cell-free fat extract, cyclic mechanical stretch-treated bone mesenchymal stem cell-derived exosomes, and strontium-containing hydroxyapatite nanoparticles also show some positive effects on bone loss.

Aminopropyltriethoxysilane (APTES)-Modified Nanohydroxyapatite (nHAp) Incorporated with Iron Oxide (IO) Nanoparticles Promotes Early Osteogenesis, Reduces Inflammation and Inhibits Osteoclast Activity

Due to its increased prevalence, osteoporosis (OP) represents a great challenge to health care systems and brings an economic burden. To overcome these issues, treatment plans that suit the need of patients should be developed. One of the approaches focuses on the fabrication of personalized biomaterials, which can restore the balance and homeostasis of disease-affected bone. In the presented study, we fabricated nanometer crystalline hydroxyapatite (nHAp) and iron oxide (IO) nanoparticles stabilized with APTES and investigated whether they can modulate bone cell metabolism and be useful in the fabrication of personalized materials for OP patients. Using a wide range of molecular techniques, we have shown that obtained nHAp@APTES promotes viability and RUNX-2 expression in osteoblasts, as well as reducing activity of critical proinflammatory cytokines while inhibiting osteoclast activity. Materials with APTES modified with nHAp incorporated with IO nanoparticles can be applied to support the healing of osteoporotic bone fractures as they enhance metabolic activity of osteoblasts and diminish osteoclasts' metabolism and inflammation.

Applications of Calcium-Based Nanomaterials in Osteoporosis Treatment

With rapidly aging populations worldwide, osteoporosis has become a serious global public health problem. Caused by disordered systemic bone remodeling, osteoporosis manifests as progressive loss of bone mass and microarchitectural deterioration of bone tissue, increasing the risk of fractures and eventually leading to osteoporotic fragility fractures. As fracture risk increases, antiosteoporosis treatments transition from nonpharmacological management to pharmacological intervention, and finally to the treatment of fragility fractures. Calcium-based nanomaterials (CBNMs) have unique advantages in osteoporosis treatment because of several characteristics including similarity to natural bone, excellent biocompatibility, easy preparation and functionalization, low pH-responsive disaggregation, and inherent pro-osteogenic properties. By combining additional ingredients, CBNMs can play multiple roles to construct antiosteoporotic biomaterials with different forms. This review covers recent advances in CBNMs for osteoporosis treatment. For ease of understanding, CBNMs for antiosteoporosis treatment can be classified as locally applied CBNMs, such as implant coatings and filling materials for osteoporotic bone regeneration, and systemically administered CBNMs for antiosteoporosis treatment. Locally applied CBNMs for osteoporotic bone regeneration develop faster than the systemically administered CBNMs, an important consideration given the serious outcomes of fragility fractures. Nevertheless, many innovations in construction strategies and preparation methods have been applied to build systemically administered CBNMs. Furthermore, with increasing interest in delaying osteoporosis progression and avoiding fragility fracture occurrence, research into systemic administration of CBNMs for antiosteoporosis treatment will have more development prospects. Deep understanding of the CBNM preparation process and optimizing CBNM properties will allow for increased application of CBNMs in osteoporosis treatments in the future.

Investigation on Potential of Chitosan Nanoparticles for Oral Bioavailability Enhancement of Risedronate Sodium

Risedronate sodium (RS) is used in osteoporosis for bone reabsorption. It is a BCS class III drug having poor oral bioavailability (<0.63%) due to low permeability. In the present study, RS-loaded chitosan nanoparticles were developed to increase oral bioavailability and evaluated for various parameters. The DSC study indicated compatibility of RS with excipients in their physical mixture. The nanoparticles were prepared by ionotropic gelation technique and lyophilized. The optimized batch (RS-CNs) was found to have particles of size 268.7 nm and zeta potential of 24.9 mV. The TEM image of RS-CNs revealed discrete spherical particles. Angle of repose of 27.02 indicates good flow property of nanoparticles. FT-IR spectra of RS-CNs showed characteristic peaks of RS indicating compatibility of RS with the excipients. The mucin binding efficiency of RS-CNs was obtained as 63.42%. The in vitro release study of RS indicated controlled delivery from RS-CNs over 22 h. The release mechanism was found to be diffusion- and erosion-controlled release. Ex vivo study using rat intestine revealed faster permeation of 32.78% in 6 h from RS-CNs compared to plain drug solution. In vivo pharmacokinetic study in rats showed increased C_max (1.8 fold) from RS-CNs compared to marketed formulation. The relative bioavailability of 193% from RS-CNs indicated significant enhancement in bioavailability upon nanoparticle formulation. The RS-CNs were found to be stable at room and refrigerated conditions. In conclusion, developed RS-loaded chitosan nanoparticles seem to be a promising approach to increase oral bioavailability and can avoid upper GI tract side effects.

Osteoporosis and Its Nanotechnology-Based Advanced Treatment-An Overview

Human Immunodeficiency Virus (HIV) is a global pandemic that has contributed to the burden of disease, and the synergistic interaction between Herpes Simplex Virus (HSV) and HIV has assisted further in the spread of the HIV disease. Moreover, several chemotherapeutic treatment options from antiviral monotherapy to highly active antiretroviral therapy (HAART) have been adopted to manage the infection; however, HIV has developed new mechanisms against these active pharmaceutical agents (APAs), limiting the effect of the drugs. In this article, we reviewed different nanoparticles and their antiviral potency against HSV and HIV infection as well as the effect of drug encapsulated nanoparticles using different drug delivery systems as they palliate to some flaws or deficiencies that the stand-alone drugs present. Drug encapsulated nanoparticles show better treatment outcomes of HSV and HIV infection. The nanoparticles can transverse the anatomic privilege sites to exert their therapeutic effect, and a prolonged and higher dose of the encapsulated therapeutic agent can ease the dosage frequency, thus palliating low drug compliance which the stand-alone drugs fail to perform. Therefore, it is clear that nanoparticles prevent antiviral drug resistance by maintaining sustained drug release over an extended period, improving the therapeutic effect of the entrapped drug.

Radiosensitization induced by zinc‐doped hydroxyapatite nanoparticles in breast cancer cells

Zinc‐doped hydroxyapatite (HA) nanoparticles were synthesized by microwave assisted method and used with ionizing radiation for inhibition of proliferation of breast cancer cells. Zinc‐doped HAs were produced in four different compositions in order to determine the best doping rate in terms of physical and biological properties. Nanoparticle characterizations were performed with X‐ray diffractometer, Fourier transform infrared spectroscopy, scanning electron microscopy, and inductively coupled plasma‐mass spectrometry. Viability of MDA‐MB‐231(isolated at M D Anderson from a pleural effusion of a patient with invasive ductal carcinoma) cells treated with nano‐HA particles and radiation were assessed by MTT assay. Caspase‐7 and Poly (ADP‐ribose) polymerase protein expressions in samples were examined by the Western blot. X‐ray diffraction patterns of our samples were found to be in good correlation with the reference HA peaks. Notably, increasing zinc amount resulted in elevated percentage of β‐tricalcium phosphate, phases. All formulations including pure HA particles were non‐cytotoxic in MDA MB 231 cells. On the other hand, low rate Zn‐doped HA particles showed significant anti‐proliferation effect during irradiation. The combination of irradiation with Zn‐doped HA particles also induced apoptosis, demonstrated as cleavage of caspase‐7 and PARP proteins. In conclusion, low rate Zn‐doped HA enhanced the radiation effect on breast cancer cells.

Nano-Based Biomaterials as Drug Delivery Systems Against Osteoporosis: A Systematic Review of Preclinical and Clinical Evidence

Osteoporosis (OP) is one of the most significant causes of morbidity, particularly in post-menopausal women and older men. Despite its remarkable occurrence, the search for an effective treatment is still an open challenge. Here, we systematically reviewed the preclinical and clinical progress in the development of nano-based materials as drug delivery systems against OP, considering the effects on bone healing and regeneration, the more promising composition and manufacturing methods, and the more hopeful drugs and delivery methods. The results showed that almost all the innovative nano-based delivery systems developed in the last ten years have been assessed by preclinical investigations and are still in the preliminary/early research stages. Our search strategy retrieved only one non-randomized controlled trial (RCT) on oligosaccharide nanomedicine of alginate sodium used for degenerative lumbar diseases in OP patients. Further investigations are mandatory for assessing the clinical translation and commercial purposes of these materials. To date, the main limits for the clinical translation of nano-based materials as drug delivery systems against OP are probably due to the low reproducibility of the manufacturing processes, whose specificity and complexity relies on an adequate chemical, structural, and biomechanical characterization, as the necessary prerequisite before assessing the efficacy of a given treatment or process. Finally, an unsatisfactory drug-loading capacity, an uncontrollable release kinetic, and a low delivery efficiency also limit the clinical application.

Water/pH dual responsive in situ calcium supplement collaborates simvastatin for osteoblast promotion mediated osteoporosis therapy via oral medication

Calcium supplement is the most commonly adopted treatment for osteoporosis but usually requires high dose and frequency. The modality of calcium supplement is therefore overlooked by current nanomedicine-based osteoporosis therapies without proper oral formulations. Herein, we proposed a tetracycline (Tc) modified and monostearin (MS) coated amorphous calcium carbonate (ACC) platform (TMA) as oral bone targeted and osteoporosis microenvironment (water/pH) responsive carrier for in situ calcium supplement. Moreover, current osteoporosis therapies also fall short of finding suitable molecular target and effective therapeutic regimen to further increase the therapeutic efficacy over available treatment means. As a result, the simvastatin (Sim) was loaded into TMA to construct drug delivery system (TMA/Sim) capable of synergistically activating the bone morphogenetic proteins (BMPs)-Smad pathway to provide a novel therapeutic regimen for osteoblast promotion mediated osteoporosis therapy. Our results revealed that optimized TMA showed high accessibility and oral availability with targeted drug delivery to bone tissue. Most importantly, benefit from the effective in situ calcium supplement and targeted Sim delivery, this therapeutic regime (TMA/Sim) achieved better synergetic effects than conventional combination strategies with promising osteoporosis reversion performance under low calcium dosage (1/10 of commercial calcium carbonate tablet) and significantly attenuated side effects.

Targeting nanoparticles for diagnosis and therapy of bone tumors: Opportunities and challenges

A variety of targeted nanoparticles were developed for the diagnosis and therapy of orthotopic and metastatic bone tumors during the past decade. This critical review will focus on principles and methods in the design of these bone-targeted nanoparticles. Ligands including bisphosphonates, aspartic acid-rich peptides and synthetic polymers were grafted on nanoparticles such as PLGA nanoparticles, liposomes, dendrimers and inorganic nanoparticles for bone targeting. Besides, other ligands such as monoclonal antibodies, peptides and aptamers targeting biomarkers on tumor/bone cells were identified for targeted diagnosis and therapy. Examples of targeted nanoparticles for the early detection of bone metastatic tumors and the ablation of cancer via chemotherapy, photothermal therapy, gene therapy and combination therapy will be intensively reviewed. The development of multifunctional nanoparticles to break down the "vicious" cycle between tumor cell proliferation and bone resorption, and the challenges and perspectives in this area will be discussed.

Bioactive injectable triple acting thermosensitive hydrogel enriched with nano-hydroxyapatite for bone regeneration: in-vitro characterization, Saos-2 cell line cell viability and osteogenic markers evaluation

Hydrogels forming in-situ have gained great attention in the area of bone tissue engineering recently, they were also showed to be a good and less invasive alternative to surgically applied ones. The primal focus of this study was to prepare chitosan-glycerol phosphate thermosensitive hydrogel formed in-situ and loaded with risedronate (bone resorption inhibitor) in an easy way with no requirement of complicated processes or large number of equipment. Then we investigated its effectiveness for bone regeneration. In-situ forming hydrogels were prepared using chitosan cross-linked with glycerol phosphate and loaded with risedronate and nano-hydroxyapatite as bone cement. The prepared hydrogels were characterized by analyzing their gelation time at 37 °C, % porosity, swelling index, in-vitro degradation, rheological properties, and in-vitro drug release. Results showed that the in-situ hydrogels prepared using 2.5% (w/v) chitosan cross-linked with 50% (w/v) glycerol phosphate in the ratio (9:1, v/v) reinforced with 20 mg/mL and nano-hydroxyapatite possessed the most sustained drug release profile. This optimized formulation was further evaluated using DSC and FTIR studies, in addition to their morphological properties using scanning electron microscopy. The effect on Saos-2 cell line viability was evaluated also using MTT assay on the optimized hydrogel formulation in addition to their action on cell proliferation using fluorescence microscope. Moreover, calcium deposition on the hydrogel and alkaline phosphatase activity were evaluated. Risedronate-nano-hydroxyapatite loaded hydrogels significantly enhanced the Saos-2 cell proliferation in addition to enhanced alkaline phosphatase activity and calcium deposition. Such results suggest that risedronate-nano-hydroxyapatite loaded hydrogels present great biocompatibility for bone regeneration. Proliferation of cells, as well as deposition of mineral on the hydrogel, was an evidence of the biocompatible nature of the hydrogel. This hydrogel formed in-situ present a good less invasive alternative for bone tissue engineering.

Anionic versus cationic bilosomes as oral nanocarriers for enhanced delivery of the hydrophilic drug risedronate

Albeit its well known potency as a postmenopausal osteoporosis treatment, Risedronate suffers from poor oral bioavailability and high oral toxicity. This is the first work to assess the potential of bilosomes to address challenges of RS oral delivery. Furthermore, impact of integrating cationic moiety into bilosomes on intestinal digestability and toxicity of RS nanovesicles was first investigated in this article. Prepared formulations were optimized based on physicochemical properties, digestibility, intestinal permeation and local toxicity studies. Optimized preparations were prepared by reversed phase evaporation technique with three extrusion cycles and loaded by 10 mg/ml RS. Molar lipid to bile salt to cholesterol ratio was adjusted to 4:1:1 at pH 5. Addition of cholesterol had significantly improved bilosomes stability to digestive media. Results also revealed that permeation of anionic vesicles increased permeation by 1.5 times more than RS solution and reduced drug toxicity by 2 folds. On the other hand, Cationic bilosomes showed good stability in GIT fluids but their induced oral toxicity could limit their use. In conclusion, bilosomes are superior over liposomes regarding protection of delivery system from the damaging effect of external in digestive bile salts. In addition, it decreases toxicity issues of orally administered drugs.

Risedronate-Loaded Macroporous Gel Foam Enriched with Nanohydroxyapatite: Preparation, Characterization, and Osteogenic Activity Evaluation Using Saos-2 Cells

The application of minimally invasive surgical techniques in the field of orthopedic surgery has created a growing need for new injectable synthetic materials that can be used for bone grafting. In this work, novel injectable thermosensitive foam was developed by mixing nHAP powder with a thermosensitive polymer with foaming power (Pluronic F-127) and loaded with a water-soluble bisphosphonate drug (risedronate) to promote osteogenesis. The foam was able to retain the porous structure after injection and set through temperature change of PF-127 solution to form gel inside the body. The effect of different formulation parameters on the gelation time, porosity, foamability, injectability, and in vitro degradation in addition to drug release from the prepared foams were analyzed using a full factorial design. The addition of a co-polymer like methylcellulose or sodium alginate into the foam was also studied. Results showed that the prepared optimized thermosensitive foam was able to gel within 1 min at 37°C, and sustain the release of drug for 72 h. The optimized formulation was further tested for any interactions using DSC and IR, and revealed no interactions between the drug and the used excipients in the prepared foam. Furthermore, the ability of the pre-set foam to support osteoblastic-like Saos-2-cell proliferation and differentiation was assessed, and revealed superior function on promoting cellular proliferation as confirmed by fluorescence microscope compared to the plain drug solution. The activity of the foam treated cells was also assessed by measuring the alkaline phosphatase activity and calcium deposition, and confirmed that the cellular activity was greatly enhanced in foam treated cells compared to those treated with the plain drug solution only. The obtained results show that the prepared risedronate-loaded thermosensitive foam would represent a step forward in the design of new materials for minimally invasive bone regeneration.

A review of using green chemistry methods for biomaterials in tissue engineering

Although environmentally safe, or green, technologies have revolutionized other fields (such as consumables, automobiles, etc.), its use in biomaterials is still at its infancy. However, in the few cases in which safe manufacturing technology and materials have been implemented to prevent postpollution and reduce the consumption of synthesized scaffold (such as bone, cartilage, blood cell, nerve, skin, and muscle) has had a significant impact on different applications of tissue engineering. In the present research, we report the use of biological materials as templates for preparing different kinds of tissues and the application of safe green methods in tissue engineering technology. These include green methods for bone and tissue engineering-based biomaterials, which have received the greatest amount of citations in recent years. Thoughts on what is needed for this field to grow are also critically included. In this paper, the impending applications of safe, ecofriendly materials and green methods in tissue engineering have been detailed.

Surface grafting of rare-earth ions doped hydroxyapatite nanorods (HAp:Ln(Eu/Tb)) with hydrophilic copolymers based on ligand exchange reaction: Biological imaging and cancer treatment

Rare-earth ions doped hydroxyapatite nanoparticles (HAp:Ln NPs) have demonstrated to be very promising candidates for biological imaging applications owing to their small size and chemical compositions similar to bone. However, these HAp:Ln NPs with controllable size and morphology should be prepared under hydrothermal treatment with hydrophobic molecules as the protective layers. The hydrophobic nature of these luminescent HAp:Ln NPs largely impeded their applications in biomedical fields. In this study, a novel and effective strategy has been developed for the surface modification of HAp:Ln nanorods through the combination of surface ligand exchange reaction and reversible-addition fragmentation chain transfer (RAFT) polymerization using 2-methacryloyloxyethyl phosphorylcholine (MPC) and itaconic acid (IA) as the monomers. Herein, a small molecule adenosine 5'-monophosphate disodium salt (AMP) that contains a phosphate group and two hydroxyl groups was used to displace the hydrophobic oleic acid on pristine HAp NPs through surface ligand exchange reaction owing to its stronger interaction with HAp NPs. On the other hand, the MPC and IA were introduced on HAp NPs through RAFT polymerization after the chain transfer agent was immobilized on the HAp NPs through the esterification reaction. The poly(IA-MPC) could not only endow the high water dispersibility but also be used for loading anticancer agent cisplatin (CDDP) through coordination interaction. To evaluate their potential biomedical applications, the cell uptake behavior, drug loading capacity and release behavior as well as cell viability of HAp:Ln-AMP-poly(IA-MPC) polymeric composites were examined. We demonstrated that the method developed in this work is very effective for introduction of functional polymers onto HAp:Ln nanorods. The HAp:Ln-AMP-poly(IA-MPC) composites are promising for cell imaging and controlled delivery of CDDP.

Nanomedicine applications in women's health: state of the art

State-of-the-art applications of nanomedicine have the potential to revolutionize the diagnosis, prevention, and treatment of a range of conditions and diseases affecting women’s health. In this review, we provide a synopsis of potential applications of nanomedicine in some of the most dominant fields of women’s health: mental health, sexual health, reproductive medicine, oncology, menopause-related conditions and dementia. We explore published studies arising from in vitro and in vivo experiments, and clinical trials where available, to reveal novel and highly promising therapeutic applications of nanomedicine in these fields. For the first time, we summarize the growing body of evidence relating to the use of nanomaterials as experimental tools for the detection, prevention, and treatment of significant diseases and conditions across the life course of a cisgender woman, from puberty to menopause; revealing the far-reaching and desirable theoretical impact of nanomedicine across different medical disciplines. We also present an overview of potential concerns regarding the therapeutic applications of nanomedicine and the factors currently restricting the growth of applied nanomedicine.

An efficient and sensitive chemosensor based on salicylhydrazide for naked-eye and fluorescent detection of Zn2

We reported here the synthesis of a diarylethene with a 2,4-dihydroxybenzoyl hydrazine moiety (1O) for Zn2+ recognition. The compound is easy to prepare with a high yield up to 85%. Compound 1O can act as a highly selective and specific fluorescent sensor for Zn2+ without interference by other common metal ions. The LOD for Zn2+ detection was determined to be 1.28 × 10-6 mol L-1. Meanwhile, 1O can be used as a naked-eye detector for the Zn2+ ion with an obvious color change from colorless to olive. Based on the fluorescent properties of 1O, we constructed a logic circuit with four inputs of the combinational stimuli of UV/vis light and Zn2+/EDTA, and one output of fluorescence intensity.

Effect of locally administered novel biodegradable chitosan based risedronate/zinc-hydroxyapatite intra-pocket dental film on alveolar bone density in rat model of periodontitis

The aim of this study was to develop a chitosan-based risedronate/zinc-hydroxyapatite intrapocket dental film (CRZHDF) for applications in the treatment of alveolar bone loss in an animal model of periodontitis. The physical characteristics (folding endurance, pH, mucoadhesive strength, risedronate content and release) of CRZHDF, exhibited results within the limit. X-ray diffraction analysis indicates reduced or disappeared crystallinity of risedronate and zinc-hydroxyapatite in presence of chitosan. Further, FTIR studies revealed stability of CRZHDF and compatibility between risedronate, zinc-hydroxyapatite and chitosan. Periodontitis was induced by Porphyromonas gingivalis-lipopolysaccharide injections around the mandibular first molar. We divided rats into 5 groups (12 rats/group): healthy, untreated periodontitis; periodontitis plus CRZHDF-A, periodontitis plus CRZHDF-B, and periodontitis plus chitosan film. After four weeks, blood samples and mandibles were obtained for biochemical, radiographic and histological analysis. Bone specific alkaline phosphatise activity and tartrate resistant acid phosphatase 5b was statistically lower in CRZHDF-A and CRZHDF-B groups as compared to the untreated periodontitis group (p < 0.0001). The expression of osteocalcin was statistically higher in CRZHDF-A and CRZHDF-B groups as compared to the untreated periodontitis group (p < 0.0001). Alveolar bone was intact in the healthy group. Local administration of CRZHDF resulted in significant improvements in the mesial and distal periodontal bone support (MPBS and DPBS, respectively) proportions (%), bone mineral density, and also reversed alveolar bone resorption when compared to the untreated periodontitis group (p < 0.001). The study reported here reveals that novel CRZHDF treatment effectively reduced alveolar bone destruction and contributes to periodontal healing in a rat model of experimental periodontitis.

Synthesis of hydroxyapatite for biomedical applications

The current need for long lasting implants and bone substitutes characterized by biocompatibility, bioactivity and mechanical properties, without the immune rejection is a great challenge for scientists. These bone substitute structures should be prepared for individual patients with all details controlled on the micrometer level. Similarly, nontoxic, biocompatible targeted drug delivery systems which allow controlling the rate and time period of the drug delivery and simultaneously eliminating toxic and side effects on the healthy tissues, are of great interest. Extensive attempts have been made to develop a simple, efficient, and green method to form biofunctional scaffolds and implant coatings possessing the above mentioned significant biocompatibility, bioactivity and mechanical strength. Moreover, that could also serve as drug delivery systems. Hydroxyapatite (HA) which is a major mineral component of vertebrate bones and teeth is an excellent material for these purposes. In this literature review the biologically inspired scaffolds, bone substitutes, implants characterized by mechanical strength and biocompatibility, as well the drug delivery systems, based on hydroxyapatite are discussed.

A bone-resorption surface-targeting nanoparticle to deliver anti-miR214 for osteoporosis therapy

With increasing fracture risks due to fragility, osteoporosis is a global health problem threatening postmenopausal women. In these patients, osteoclasts play leading roles in bone loss and fracture. How to inhibit osteoclast activity is the key issue for osteoporosis treatment. In recent years, miRNA-based gene therapy through gene regulation has been considered a potential therapeutic method. However, in light of the side effects, the use of therapeutic miRNAs in osteoporosis treatment is still limited by the lack of tissue/cell-specific delivery systems. Here, we developed polyurethane (PU) nanomicelles modified by the acidic peptide Asp⁸. Our data showed that without overt toxicity or eliciting an immune response, this delivery system encapsulated and selectively deliver miRNAs to OSCAR⁺ osteoclasts at bone-resorption surface in vivo. With the Asp⁸-PU delivery system, anti-miR214 was delivered to osteoclasts, and bone microarchitecture and bone mass were improved in ovariectomized osteoporosis mice. Therefore, Asp⁸-PU could be a useful bone-resorption surface-targeting delivery system for treatment of osteoclast-induced bone diseases and aging-related osteoporosis.

Development of a coumarin-furan conjugate as Zn2+ ratiometric fluorescent probe in ethanol-water system

In this study, a novel coumarin-derived compound bearing the furan moiety called 7-diethylamino-3-formylcoumarin (2'-furan formyl) hydrazone (1) has been designed, synthesized and evaluated as a Zn²⁺ ratiometric fluorescent probe in ethanol-water system. This probe 1 showed good selectivity and high sensitivity towards Zn²⁺ over other metal ions investigated, and a decrease in fluorescence emission intensity at 511nm accompanied by an enhancement in fluorescence emission intensity at 520nm of this probe 1 was observed in the presence of Zn²⁺ in ethanol-water (V : V=9 : 1) solution, which provided ratiometric fluorescence detection of Zn²⁺. Additionally, the ratiometric fluorescence response of 1 to Zn²⁺ was nearly completed within 0.5min, which suggested that this probe 1 could be utilized for sensing and monitoring Zn²⁺ in environmental and biological systems for real-time detection.