Cyclic voltammetry deposition of copper nanostructure on MWCNTs modified pencil graphite electrode: An ultra-sensitive hydrazine sensor

Application of recycled battery graphite decorated with poly hippuric acid/ multiwalled carbon nanotubes as an ecofriendly sensor for serotonin

A novel modified sensor based on electropolymerization of hippuric acid (HA) using cyclic voltammetry within the potential window - 1 to 1.5 V for 10 cycles at a scan rate 100 mV s-1 over multiwalled carbon nanotubes (MWCNTs) on battery graphite electrode (BGE). Poly (HA)/MWCNTs/BGE sensor exhibited two linearity ranges 3.00 × 10-3 to 1.00 µM (5.29 × 10-4 - 0.18 µg/ml) and 5.00 to 1.00 × 103 µM (0.88- 176.22 µg/ml) with limit of detection (LOD) of 0.06 × 10-2 µM (1.06 × 10-4 µg/ml) and limit of quantification (LOQ) of 2.00 × 10-3 µM (3.52 × 10-4 µg/ml). The poly (HA)/MWCNTs/BGE sensor was successfully applied to the determination of SER in the presence of tryptophan and in human blood serum with recovery ranges 98.31-105.47% with RSD values 3.02- 4.77%. Green chemistry metrics : national environmental index (NEMI), analytical greenness metric (AGREE), Raynie and Driver, green analytical procedure index (GAPI), and the analytical eco-scale were employed and indicated that the proposed sensor can be classified as an excellent green method, achieving an analytical eco-scale score of 84.

Novel biosynthesis of gold nanoparticles for multifunctional applications: Electrochemical detection of hydrazine and treatment of gastric cancer

In this work, an environmentally friendly strategy was used to synthesize gold nanoparticles (Au NPs) using Olea europaea (olive) fruit. Transmission electron microscopy (TEM), UV-Vis spectroscopy, X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) were used to characterize the physicochemical properties of the synthesized NPs. An Au NPs modified glassy carbon electrode was used to investigate the direct electrochemical oxidation of hydrazine. The suggested hydrazine sensor has good performance, such as a wide linear range (2.5-275 μM), low limit of detection (0.09 μM), notable selectivity and excellent reproducibility (RSD = 2.2%). The in-vitro cytotoxicity of three human cancer cell lines (KATOIII, NCI-N87, and SNU-16) was also explored with various concentrations of Au NPs prepared from olive fruit extract. Bio-synthesized Au NPs were found to have cytotoxic properties against gastric cancer in humans based on MTT assay protocol. The obtained results show that green synthesized Au NPs can be successfully employed in electrochemical sensing and cancer treatment applications.

The application of multi-walled carbon nanotubes modified pencil graphite electrode for voltammetric determination of favipiravir used in COVID-19 treatment

This study describes the first application of an improved procedure on a pencil graphite electrode decorated with functionalized multi-walled carbon nanotubes (f-MWCNTs/PGE) for the determination of the COVID-19 antiviral drug, favipiravir (FVP). The electrochemical behavior of FVP at f-MWCNTs/PGE was examined by cyclic voltammetry and differential pulse voltammetry (DPV) methods, and it was noted that the voltammetric response significantly increased with the modification of f -MWCNTs to the surface. The linear range and limit of detection from DPV studies were determined as 1-1500 µM and 0.27 µM, respectively. In addition, the selectivity of the method was tested toward potential interferences, which can be present in pharmaceutical and biological samples, and it was found that f-MWCNTs/PGE showed high selectivity for the determination of FVP in the presence of probable interferences. The results with high accuracies and precisions from the obtained feasibility studies also revealed that the designed procedure can be used for accurate and selective voltammetric determination of FVP in real samples.

Graphical abstract

Electrochemical sensors based on metal nanoparticles with biocatalytic activity

Biosensors have attracted a great deal of attention, as they allow for the translation of the standard laboratory-based methods into small, portable devices. The field of biosensors has been growing, introducing innovations into their design to improve their sensing characteristics and reduce sample volume and user intervention. Enzymes are commonly used for determination purposes providing a high selectivity and sensitivity; however, their poor shelf-life is a limiting factor. Researchers have been studying the possibility of substituting enzymes with other materials with an enzyme-like activity and improved long-term stability and suitability for point-of-care biosensors. Extra attention is paid to metal and metal oxide nanoparticles, which are essential components of numerous enzyme-less catalytic sensors. The bottleneck of utilising metal-containing nanoparticles in sensing devices is achieving high selectivity and sensitivity. This review demonstrates similarities and differences between numerous metal nanoparticle-based sensors described in the literature to pinpoint the crucial factors determining their catalytic performance. Unlike other reviews, sensors are categorised by the type of metal to study their catalytic activity dependency on the environmental conditions. The results are based on studies on nanoparticle properties to narrow the gap between fundamental and applied research. The analysis shows that the catalytic activity of nanozymes is strongly dependent on their intrinsic properties (e.g. composition, size, shape) and external conditions (e.g. pH, type of electrolyte, and its chemical composition). Understanding the mechanisms behind the metal catalytic activity and how it can be improved helps designing a nanozyme-based sensor with the performance matching those of an enzyme-based device.

Recent developments in electrochemical sensors for detecting hydrazine with different modified electrodes

The detection of hydrazine (HZ) is an important application in analytical chemistry. There have been recent advancements in using electrochemical detection for HZ. Electrochemical detection for HZ offers many advantages, e.g., high sensitivity, selectivity, speed, low investment and running cost, and low laboriousness. In addition, these methods are robust, reproducible, user-friendly, and compatible with the concept of green analytical chemistry. This review is devoted to the critical comparison of electrochemical sensors and measuring protocols used for the voltammetric and amperometric detection of the most frequently used HZ in water resources with desirable recovery. Attention is focused on the working electrode and its possible modification which is crucial for further development.

The Role of Mineral Sea Water Bonding Process with Graphite-Aluminum Electrodes as Electric Generator

The development of alternative ecofriendly electric energy production technology is very essential. The development of electric generator by using sea water element to boost electron jump in electrode has been studied. The aim of this research is to develop an electrode material composite that can collaborate with sea water to produce electricity. The electrodes tested are copper, aluminum, activated carbon, wood powder, and graphite electrode powder. The result shows that each electrode produces different voltage when interacting with sea water. It is caused by the patterns of the electron movement disrupted by the electron of sea water in producing a new compound. The composite of graphite-aluminum generates high electricity of about 580 mV compared to other materials. The electrical conductivity of graphite material depends on the particle size which is larger at smaller particle size. This research elucidates the role of sea water elements in boosting kinetic energy of delocalized electron on graphite resulting in an electron jump.

Disulphide linkage: To get cleaved or not? Bulk and nano copper based SERS of cystine

Different nano-structures of noble metals have been the conventional substrates for carrying out Surface Enhanced Raman Spectroscopy (SERS). In this paper we examine electrodeposited copper (Cu) nano-structures on pencil graphite as novel substrate to carry out SERS measurements by considering l-cystine (Cys-Cys) (dimer of the amino acid cysteine) as the probe. The formation of monolayer of the probe molecule on the substrates was confirmed using cyclic voltammetric measurements. Mode of adsorption of Cys-Cys was observed to be different on bulk Cu (taken in the wire form) and nano-structured Cu on pencil graphite. Whereas in the former the disulphide bond of Cys-Cys remained intact, it got cleaved when Cys-Cys was adsorbed on electrodeposited copper indicating the activated nature of the nano-structure compared to bulk copper. CS stretching mode of vibration underwent blue shift in Cys-Cys adsorbed on Cu on pencil graphite vis-à-vis Cys-Cys adsorbed on Cu wire. Further evidence on the cleavage of the CS bond on an activated substrate was obtained by considering a bimetallic substrate comprising of silver on copper which was electrodeposited on pencil graphite. Our studies have demonstrated that nano‑copper surface is an excellent substrate for SERS giving 200 μM as lower detection limit for Cys-Cys.

The photocatalytic role of electrodeposited copper on pencil graphite

We report on the ability of template-electrodeposited copper on pencil graphite as a novel and cost effective photocatalyst by considering the photodimerization of p-aminothiophenol (p-ATP) to 4,4'-dimercaptoazobenzene.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

One-pot electrochemical preparation of copper species immobilized poly(o-aminophenol)/MWCNT composite with excellent electrocatalytic activity for use as an H2O2 sensor

Redox activity of copper species immobilized poly(o-aminophenol)/multi-walled carbon nanotube for direct electrocatalysis towards detection of H₂O₂.