Photosensitive semiconducting polymer-incorporated nanofibers for promoting the regeneration of skin wound

Fiber/hydrogel hybrid wound dressing based on eggshell membrane containing postbiotic ingredients

Skin is the largest organ in body which has important functions. Therefore, to have a healthy skin is very essential, and wound dressings are specifically designed to promote the wound healing process. The aim of this study is to prepare and characterize a fiber-hydrogel wound dressing based on eggshell membrane (ESM) enriched with postbiotic compounds extracted from Lactobacillus plantarum NIMBB003 bacteria. For this purpose, ESM was effectively separated from eggshells through acidic treatment. Then, ultrasound was used for an optimal duration of 1.89 min at 95 % of device's power to expand the pore size of ESM from 6.89 to 10.84 μm to enhance hydrogel infiltration into ESM. The hydrogel (alginate and oxidized alginate) was then infiltrated into the ESM. ATR, SEM, and weight measurement of samples showed the proper infiltration of the hydrogel within the ESM structure. However, biostability analysis revealed that alginate hydrogel was more stable in the hybrid structure compared to oxidase alginate hydrogel. Alginate infiltration into ESM, improved the ultimate strength of the ESM to 1.89 ± 0.17 MPa and water uptake degree to 368.05 % ± 24.34 %. The water vapor transmission rate of the designed dressing was 34.14 ± 1.05 mg/cm2 after 72 h, which means the proper moist management in wound bed. Finally, addition of postbiotics at a concentration of 10 mg/ml into the hydrogel improved cell proliferation in five days. Furthermore, human dermal fibroblast cells adhered to the wound dressings properly and spread along the fibers of the ESM. In general, the developed wound dressing composed of natural biomaterials with extracellular matrix-like structure, can be used effectively to assist the wound healing process.

Electrospun Conducting Polymers: Approaches and Applications

Inherently conductive polymers (CPs) can generally be switched between two or more stable oxidation states, giving rise to changes in properties including conductivity, color, and volume. The ability to prepare CP nanofibers could lead to applications including water purification, sensors, separations, nerve regeneration, wound healing, wearable electronic devices, and flexible energy storage. Electrospinning is a relatively inexpensive, simple process that is used to produce polymer nanofibers from solution. The nanofibers have many desirable qualities including high surface area per unit mass, high porosity, and low weight. Unfortunately, the low molecular weight and rigid rod nature of most CPs cannot yield enough chain entanglement for electrospinning, instead yielding polymer nanoparticles via an electrospraying process. Common workarounds include co-extruding with an insulating carrier polymer, coaxial electrospinning, and coating insulating electrospun polymer nanofibers with CPs. This review explores the benefits and drawbacks of these methods, as well as the use of these materials in sensing, biomedical, electronic, separation, purification, and energy conversion and storage applications.

Accelerated Skin Wound Healing by Electrical Stimulation

When the integrity of the skin got damaged, an endogenous electric field will be generated in the wound and a series of physiological reactions will be initiated to close the wound. The existence of the endogenous electric field of the wound has a promoting effect on all stages of wound healing. For wounds that cannot heal on their own, the exogenous electric field can assist the treatment. In this review, the effects of exogenous electrical stimulation on wound healing, such as the inflammation phase, blood flow, cell proliferation and migration, and the wound scarring is overviewed. This article also reviews the new electrical stimulation methods that have emerged in recent years, such as small power supplies, nanogenerators (NGs), and other physical, chemical or biological strategies. These new electrical stimulation methods and devices are safe, low-cost, stable, and small in size. The challenge and perspective are discussed for the future trends of the electrical stimulation treatment in accelerating skin wound healing.

3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices

The ability to seamlessly integrate functional materials into three-dimensional (3D) constructs has been of significant interest, as it can enable the creation of multifunctional devices. Such integration can be achieved with a multiscale, multi-material 3D printing strategy. This technology has enabled the creation of unique devices such as personalized tissue regenerative scaffolds, biomedical implants, 3D electronic devices, and bionic constructs which are challenging to realize with conventional manufacturing processes. In particular, the incorporation of nanomaterials into 3D printed devices can endow a wide range of constructs with tailorable mechanical, chemical, and electrical functionalities. This review highlights the advances and unique possibilities in the fabrication of novel electronic, biomedical, and bioelectronic devices that are realized by the synergistic integration of nanomaterials with 3D printing technologies.

Nanoparticle-based Cell Trackers for Biomedical Applications

The continuous or real-time tracking of biological processes using biocompatible contrast agents over a certain period of time is vital for precise diagnosis and treatment, such as monitoring tissue regeneration after stem cell transplantation, understanding the genesis, development, invasion and metastasis of cancer and so on. The rationally designed nanoparticles, including aggregation-induced emission (AIE) dots, inorganic quantum dots (QDs), nanodiamonds, superparamagnetic iron oxide nanoparticles (SPIONs), and semiconducting polymer nanoparticles (SPNs), have been explored to meet this urgent need. In this review, the development and application of these nanoparticle-based cell trackers for a variety of imaging technologies, including fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, magnetic particle imaging, positron emission tomography and single photon emission computing tomography are discussed in detail. Moreover, the further therapeutic treatments using multi-functional trackers endowed with photodynamic and photothermal modalities are also introduced to provide a comprehensive perspective in this promising research field.

Collagen-tussah silk fibroin hybrid scaffolds loaded with bone mesenchymal stem cells promote skin wound repair in rats

This study demonstrates the efficacy of collagen/tussah silk fibroin (Col/TSF) hybrid scaffolds loaded with bone mesenchymal stem cells (BMSCs) in skin repair. Collagen (Col) and tussah silk fibroin (TSF) were extracted from bovine tendons and tussah cocoons, respectively. Col/TSF scaffolds were obtained using a freeze-drying method and were characterised using fourier transform infrared spectroscopy, scanning electron microscopy, porosity, water retention, thermal stability, and biocompatibility. The results revealed that addition of TSF to scaffolds could enhance their moisturising ability and cell infiltration. The antibacterial properties of Col/TSF scaffolds loaded with antibiotics were also excellent. BMSCs cultured in contact with developed Col/TSF scaffolds showed increased cell adhesion, viability, and differentiation. An in vivo study on rats showed that the Col/TSF scaffold seeded with BMSCs was more conducive to wound healing compared to the Col/TSF scaffold alone. The present study suggests that Col/TSF scaffold seeded with BMSCs could be a promising candidate for skin tissue engineering, due to its excellent skin affinity, good air and water permeability, and improved wound healing potential.

Preparation and Properties of Carboxymethyl Chitosan/Alginate/Tranexamic Acid Composite Films

In this study, the porous composite films of carboxymethyl chitosan/alginate/tranexamic acid were fabricated, with calcium chloride as the crosslinking agent and glycerin as a plasticizer. The composite films were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The properties of the composite films, including water absorption, air permeability, and cumulative release rate, were tested. In addition, their hemostatic performance was evaluated. The results showed that the appearance of the films with good adhesion was smooth and porous. FTIR showed that chemical crosslinking between carboxymethyl chitosan and sodium alginate was successful. The excellent cumulative release of tranexamic acid in the composite films (60–80%) gives the films a significant procoagulant effect. This has good prospects for the development of medical hemostasis materials.

Photogenerated Electrical Fields for Biomedical Applications

The application of electrical engineering principles to biology represents the main issue of bioelectronics, focusing on interfacing of electronics with biological systems. In particular, it includes many applications that take advantage of the peculiar optoelectronic and mechanical properties of organic or inorganic semiconductors, from sensing of biomolecules to functional substrates for cellular growth. Among these, technologies for interacting with bioelectrical signals in living systems exploiting the electrical field of biomedical devices have attracted considerable attention. In this review, we present an overview of principal applications of phototransduction for the stimulation of electrogenic and non-electrogenic cells focusing on photovoltaic-based platforms.

Can regenerative medicine and nanotechnology combine to heal wounds? The search for the ideal wound dressing

Skin is the outermost covering of the human body and at the same time the largest organ comprising 15% of body weight and 2 m2 surface area. Skin plays a key role as a barrier against the outer environment depending on its thickness, color and structure, which differ from one site to another. The four major types of problematic wounds include ulcers (diabetic, venous, pressure) and burn wounds. Developing novel dressings helps us to improve the wound healing process in difficult patients. Recent advances in regenerative medicine and nanotechnology are revolutionizing the field of wound healing. Antimicrobial activity, exogenous cell therapy, growth factor delivery, biodegradable and biocompatible matrix construction, all play a role in hi-tech dressing design. In the present review, we discuss how the principles of regenerative medicine and nanotechnology can be combined in innovative wound dressings.

LED Phototherapy with Gelatin Sponge Promotes Wound Healing in Mice

Tiny but highly efficient, a light-emitting diode (LED) can power a therapy device, such as a phototherapy device, and, at the same time, decrease the device's size requirements. In this study, a LED phototherapy device was designed to investigate the possible impact on wound healing using a mouse model and a cell line exposed to red and blue light. To enhance wound phototherapy, a gelatin sponge was fabricated. Results showed that the red and blue lights promoted cell growth and wound healing, while the blue light with a gelatin sponge protected the wound from infection in the early stages of wound healing. The LED phototherapy device combined with the gelatin sponge, therefore, has potential significance in clinical application for wound healing.

Nanostructured lipid systems modified with waste material of propolis for wound healing: Design, in vitro and in vivo evaluation

Propolis, a natural compound that can accelerate the wound healing process, is mainly used as ethanolic extract. The extractive solution may also be obtained from the propolis by-product (BP), transforming this waste material into a pharmaceutical active ingredient. Even if propolis does not show toxicity, when used as an extract over harmed skin or mucosa, the present ethanol content may be harmful to the tissue recovering, besides hindering the drug release. This study describes the development of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) as topical propolis delivery systems and the investigation of their in vitro and in vivo activities. The extracts were evaluated to guarantee their quality, and the lipid dispersions were characterized with respect to morphology (cryo-TEM), size and diffractometry (X-ray) properties. The occlusive capacity of formulations was also evaluated by an in vitro technique, which determines the occlusion factor. The drug entrapment efficiency (EE), as well as the in vitro drug release profile from the nanoparticulate systems was investigated as well. The size analysis performed through 90days was favorable to a topical administration and the polydispersity index, though not ideal in all cases due to the high content of resins and gums from the extracts, were relatively stable for the SLN. The propolis extract contributes to the occlusive potential of the formulations. The human immortalized keratinocytes presented good cell viability when tested with both extracts (propolis and BP) freely or entrapped in the systems. SLN modified with propolis material provided an acceleration of the in vivo wound healing process.