The potential of photo-deposited silver coatings on Foley catheters to prevent urinary tract infections

Silver-Treated Sutures for the Prevention of Biofilm-Associated Surgical Site Infections

BACKGROUND/OBJECTIVES

The huge concerns associated with biofilm-related infections in surgical procedures, along with the antibiotic resistance demonstrated by an increasing number of bacteria, have highlighted the need for alternative and effective prevention approaches. The aim of this research was to develop novel antimicrobial coatings on surgical sutures for the prevention of surgical site infections through nanotechnology-based methods.

RESULTS

The results demonstrated that although very low amounts of silver precursor were adopted for the treatments, the silver coating was effective against Staphylococcus aureus and antibiotic-resistant Pseudomonas aeruginosa in reducing the potential risk of infection.

METHODS

Nanostructured silver coatings were deposited onto the surface of polyglactin 910 absorbable braided sutures through a technology based on a photo-assisted chemical reaction. The materials were characterized in order to verify the efficacy of the coating in preventing biofilm formation and in reducing the bacterial colonization of the device.

CONCLUSIONS

As a broad-spectrum antimicrobial agent, silver represents an important option for the prevention and management of surgical site infections. The silver deposition technology adopted in this work provides an interesting strategy for preventing biofilm formation on medical devices such as surgical sutures.

Ag quantum dots-doped poly (vinyl alcohol)/chitosan hydrogel coatings to prevent catheter-associated urinary tract infections

The prevention of catheter-associated urinary tract infections (CAUTIs) significantly impacts the reduction of morbidity and mortality associated with the use of indwelling urinary catheters. This study focused on developing an antibacterial double network hydrogel coating for latex urinary catheters, which incorporated Ag quantum dots (Ag QDs) in a polyvinyl alcohol (PVA)-chitosan (CS) double network hydrogel matrix. The PVA-CS-Ag QDs, referred to as the PCA hydrogel coating exhibited excellent mechanical and physiochemical properties with controlled release of Ag QDs. The antibacterial properties of the PCA hydrogel-coated urinary catheters were studied against both gram-negative Escherichia coli (E. coli, ATCC25922) and gram-positive Staphylococcus aureus (S. aureus, ATCC29213). The continuous release of CS oligomers and Ag QDs from the hydrogel coating contributed to the synergistic antibacterial and antiadhesion effects. Measurements of the Ag release rate revealed that even after 30 days, the concentration of Ag QDs from the PCA hydrogel-coated urinary catheters remained significantly higher than the effective antibacterial concentration of the total Ag (0.1 μg·L-1). These results indicated that the PCA hydrogel coating not only efficiently prevented bacteria attachment, but also exhibited long-term antibacterial activity, thereby inhibiting biofilm formation. Furthermore, the PCA hydrogel-coated urinary catheter demonstrated excellent biocompatibility and hemocompatibility. Overall, this novel PCA hydrogel-coated urinary catheter, with its exceptional antibacterial properties, holds great potential in reducing the incidence of CAUTIs.

Silver-Treated Silk Fibroin Scaffolds for Prevention of Critical Wound Infections

The risk of infections in chronic wounds represents a serious issue, particularly in aged people and in patients affected by diseases such as diabetes and obesity. Moreover, the growing resistance demonstrated by many bacterial strains has significantly reduced the therapeutic options for clinicians and has become a great challenge for the researchers in the definition of novel approaches that promote the wound healing process and reduce the healing time. Tissue engineering approaches based on biomaterials and three-dimensional scaffolds have demonstrated huge potential in supporting cell proliferation; among them, Bombyx mori-derived silk fibroin is a very appealing possibility for the development of devices with regenerative properties for wound healing applications. However, due to the high risk of infections in chronic wounds, an antibacterial treatment is also strongly encouraged for preventing bacterial proliferation at the wound site. In this work, to develop a device with regenerative and antibacterial properties, antibacterial silver coatings were deposited onto silk fibroin scaffolds, and the effect of the treatment in terms of chemical-physical and microbiological properties was investigated. The results demonstrated that the silver treatment improved the mechanical properties of the protein scaffold and provided good antibacterial efficacy against representative bacterial strains in wound infection, namely Escherichia coli and antibiotic-resistant Pseudomonas aeruginosa.

Biomaterials assisted reconstructive urology: The pursuit of an implantable bioengineered neo-urinary bladder

Urinary bladder is a dynamic organ performing complex physiological activities. Together with ureters and urethra, it forms the lower urinary tract that facilitates urine collection, low-pressure storage, and volitional voiding. However, pathological disorders are often liable to cause irreversible damage and compromise the normal functionality of the bladder, necessitating surgical intervention for a reconstructive procedure. Non-urinary autologous grafts, primarily derived from gastrointestinal tract, have long been the gold standard in clinics to augment or to replace the diseased bladder tissue. Unfortunately, such treatment strategy is commonly associated with several clinical complications. In absence of an optimal autologous therapy, a biomaterial based bioengineered platform is an attractive prospect revolutionizing the modern urology. Predictably, extensive investigative research has been carried out in pursuit of better urological biomaterials, that overcome the limitations of conventional gastrointestinal graft. Against the above backdrop, this review aims to provide a comprehensive and one-stop update on different biomaterial-based strategies that have been proposed and explored over the past 60 years to restore the dynamic function of the otherwise dysfunctional bladder tissue. Broadly, two unique perspectives of bladder tissue engineering and total alloplastic bladder replacement are critically discussed in terms of their status and progress. While the former is pivoted on scaffold mediated regenerative medicine; in contrast, the latter is directed towards the development of a biostable bladder prosthesis. Together, these routes share a common aspiration of designing and creating a functional equivalent of the bladder wall, albeit, using fundamentally different aspects of biocompatibility and clinical needs. Therefore, an attempt has been made to systematically analyze and summarize the evolution of various classes as well as generations of polymeric biomaterials in urology. Considerable emphasis has been laid on explaining the bioengineering methodologies, pre-clinical and clinical outcomes. Some of the unaddressed challenges, including vascularization, innervation, hollow 3D prototype fabrication and urinary encrustation, have been highlighted that currently delay the successful commercial translation. More importantly, the rapidly evolving and expanding concepts of bioelectronic medicine are discussed to inspire future research efforts towards the further advancement of the field. At the closure, crucial insights are provided to forge the biomaterial assisted reconstruction as a long-term therapeutic strategy in urological practice for patients' care.

The urobiome, urinary tract infections, and the need for alternative therapeutics

Improvements in bacterial culturing and DNA sequencing techniques have revealed a diverse, and hitherto unknown, urinary tract microbiome (urobiome). The potential role of this microbial community in contributing to health and disease, particularly in the context of urinary tract infections (UTIs) is of significant clinical importance. However, while several studies have confirmed the existence of a core urobiome, the role of its constituent microbes is not yet fully understood, particularly in the context of health and disease. Herein, we review the current state of the art, concluding that the urobiome represents an important component of the body's innate immune defences, and a potentially rich resource for the development of alternative treatment and control strategies for UTIs.

Bioinspired Materials for Wound Healing Application: The Potential of Silk Fibroin

Nature is an incredible source of inspiration for scientific research due to the multiple examples of sophisticated structures and architectures which have evolved for billions of years in different environments. Numerous biomaterials have evolved toward high level functions and performances, which can be exploited for designing novel biomedical devices. Naturally derived biopolymers, in particular, offer a wide range of chances to design appropriate substrates for tissue regeneration and wound healing applications. Wound management still represents a challenging field which requires continuous efforts in scientific research for definition of novel approaches to facilitate and promote wound healing and tissue regeneration, particularly where the conventional therapies fail. Moreover, big concerns associated to the risk of wound infections and antibiotic resistance have stimulated the scientific research toward the definition of products with simultaneous regenerative and antimicrobial properties. Among the bioinspired materials for wound healing, this review focuses attention on a protein derived from the silkworm cocoon, namely silk fibroin, which is characterized by incredible biological features and wound healing capability. As demonstrated by the increasing number of publications, today fibroin has received great attention for providing valuable options for fabrication of biomedical devices and products for tissue engineering. In combination with antimicrobial agents, particularly with silver nanoparticles, fibroin also allows the development of products with improved wound healing and antibacterial properties. This review aims at providing the reader with a comprehensive analysis of the most recent findings on silk fibroin, presenting studies and results demonstrating its effective role in wound healing and its great potential for wound healing applications.

Implantable Medical Devices and Tissue Engineering: An Overview of Manufacturing Processes and the Use of Polymeric Matrices for Manufacturing and Coating their Surfaces

Medical devices are important diagnosis and therapy tools for several diseases which include a wide range of products. Technological advances in this area have been proposed to reduce adverse complication incidences. New technologies and manufacturing processes, as well as the development of new materials or medical devices with modified surface and the use of biodegradable polymeric devices such as a substrate for cell culture in the field of tissue engineering, have attracted considerable attention in recent years by the scientific community intended to produce medical devices with superior properties and morphology. This review article focused on implantable devices, addresses the major advances in the biomedical field related to the devices manufacture processes such as 3D printing and hot melting extrusion, and the use of polymer matrices composed of copolymers, blends, nanocomposites or grafted with antiproliferative drugs for manufacturing and/or coating the devices surface.

Does antimicrobial coating and impregnation of urinary catheters prevent catheter-associated urinary tract infection? A review of clinical and preclinical studies

Introduction: Catheter-associated urinary tract infection (CAUTI) is one of the most common nosocomial infections in hospitals, accounting for 36% of all health care-associated infections. Areas covered: We aimed to address the potential impact of antimicrobial coating of catheter materials for the prevention of CAUTI and to analyze the progress made in this field. We conducted literature searches in the PubMed, Embase, and Cochrane Library databases, and found 578 articles. Data from 60 articles in either the preclinical or clinical stage were analyzed in this expert review. Expert opinion: The literature review revealed many promising methods for preventing CAUTI. Recent studies have suggested the combination of silver-based products and antibiotics, owing to their synergistic effect, to help address the problem of antibiotic resistance. Other coating materials that have been tested include nitric oxide, chlorhexidine, antimicrobial peptides, enzymes, and bacteriophages. Because of heterogeneity among studies, it is difficult to reliably comment on the clinical efficacy of different coating materials. Future research should focus on double-blind randomized clinical trials for evaluating the role of these potential coating agents.

Design of an Antifungal Surface Embedding Liposomal Amphotericin B Through a Mussel Adhesive-Inspired Coating Strategy

Microbial colonization of urinary catheters remains a serious problem for medicine as it often leads to biofilm formation and infection. Among the approaches reported to deal with this problem, surfaces functionalization to render them with antimicrobial characteristics, comprises the most promising one. Most of these strategies, however, are designed to target bacterial biofilms, while fungal biofilms are much less taken into account. In real-life settings, fungi will be inevitably found in consortium with bacteria, especially in the field of biomaterials. The development of antifungal coating strategies to be combined with antibacterial approaches will be pivotal for the fight of biomaterial-associated infections. The main goal of the present study was, therefore, to engineer an effective strategy for the immobilization of liposomal amphotericin B (LAmB) on polydimethylsiloxane (PDMS) surfaces to prevent Candida albicans colonization. Immobilization was performed using a two-step mussel-inspired coating strategy, in which PDMS is first immersed in dopamine solution. Its polymerization results in the deposition of a thin adherent film, called polydopamine (pDA), which allowed the incorporation of LAmB, afterwards. Different concentrations of LAmB were screened in order to obtain a contact-killing surface with no release of LAmB. Surface characterization confirmed the polymerization of dopamine and further functionalization with LAmB yielded surfaces with less roughness and more hydrophilic features. The proposed coating strategy rendered the surfaces of PDMS with the ability to prevent the attachment of C. albicans and kill the adherent cells, without toxicity toward mammalian cells. Overall results showed that LAmB immobilization on a surface retained its antifungal activity and reduced toxicity, holding therefore a great potential to be applied for the design of urinary catheters. Since the sessile communities commonly found associated to these devices exhibit a polymicrobial nature, the next challenge will be to co-immobilize LAmB with antibacterial agents to prevent the establishment of catheter-associated urinary tract infections (CAUTI).

Offensive waste valorisation in the UK: Assessment of the potentials for absorbent hygiene product (AHP) recycling

Offensive human waste refers to non-hazardous waste that contains body fluids from non-infectious humans, comprised of post-consumer Absorbent Hygiene Products (AHPs), swabs, dressings, bedding, gloves, and other materials. While this waste category requires more stringent handling, storage and disposal measures than general waste, its non-hazardous nature suggests that there are opportunities for waste valorisation. An inventory of 200 offensive human waste bags collected from various healthcare institutions in South-Eastern England show that about 76% of the waste is comprised of AHPs, most of which are adult incontinence pads and child nappies. Mixed plastics comprised of predominantly HDPE represent 9% of the waste. To evaluate the potentials for offensive human waste valorisation, small-scale separation tests involving artificially-soiled nappies and associated mixed plastic packaging wastes have been performed. Findings suggest that about 50% of the total superabsorbent polymer is recoverable from fluff pulp fractions, recoveries of which are unaffected by the presence of ionic species typically present in human waste. On the other hand, recovery of mixed plastic packaging is more challenging. Overall, however, findings suggest that viable AHP recycling is possible if recyclate materials are targeted towards non-food related markets outlets such as the construction and land remediation sectors.

Comparative activity of silver-based antimicrobial composites for urinary catheters

Biomedical polymers are an integral component in a wide range of medical devices because of their many desirable properties. However, extensive use of polymer materials in medical devices has been associated with an increasing incidence of patient infections. Efforts to address this issue have included incorporating antimicrobial additives to develop novel antimicrobial polymeric materials. Silver, with its high toxicity towards bacteria, oligodynamic effect and good thermal stability, has been employed as an additive for polymeric medical devices. In the present study, commercially available elemental (Biogate) and ionic (Ultrafresh 16) silver additives were incorporated into a Polyamide 11 (PA 11) matrix using a compression press. These polymer composites were evaluated for their antimicrobial and ion-release properties. Elemental silver composites were shown to retain their antimicrobial properties for extended periods and actively released silver ions for 84 days; whereas ionic silver composites lost their ion-release activity and, therefore, their antibacterial activity after 56 days. Bacterial log reduction units of 3.87 for ionic silver and 2.41 for elemental silver were identified within 24 h, when tested in accordance with the ISO 22196 test standard; this indicates that ionic silver is more efficient for short-term applications than elemental silver.

Emerging nanotechnology based strategies for diagnosis and therapeutics of urinary tract infections: A review

At present, various diagnostic and therapeutic approaches are available for urinary tract infections. But, still the quest for development of more rapid, accurate and reliable approach is an unending process. The pathogens, especially uropathogens are adapting to new environments and antibiotics day by day rapidly. Therefore, urinary tract infections are evolving as hectic and difficult to eradicate, increasing the economic burden to the society. The technological advances should be able to compete the adaptability characteristics of microorganisms to combat their growth in new environments and thereby preventing their infections. Nanotechnology is at present an extensively developing area of immense scientific interest since it has diverse potential applications in biomedical field. Nanotechnology may be combined with cellular therapy approaches to overcome the limitations caused by conventional therapeutics. Nanoantibiotics and drug delivery using nanotechnology are currently growing areas of research in biomedical field. Recently, various categories of antibacterial nanoparticles and nanocarriers for drug delivery have shown their potential in the treatment of infectious diseases. Nanoparticles, compared to conventional antibiotics, are more beneficial in terms of decreasing toxicity, prevailing over resistance and lessening costs. Nanoparticles present long term therapeutic effects since they are retained in body for relatively longer periods. This review focuses on recent advances in the field of nanotechnology, principally emphasizing diagnostics and therapeutics of urinary tract infections.

Characterisation of polyamide 11/copper antimicrobial composites for medical device applications

Direct incorporation of antimicrobial additive into the polymer matrix is a cost effective approach for the development of polymer/metal antimicrobial composites. Application of these antimicrobial composite systems for manufacturing medical devices addresses the issue of device related infections. In the present study, commercially available inorganic copper based additive, Plasticopper, was incorporated into a Polyamide 11(PA 11) matrix during the polymer processing stage. These polymer composites were evaluated for their morphological, mechanical, antimicrobial and ion release properties. Isothermal crystallisation studies showed that the copper additive acted as a nucleating agent and promoted faster crystallisation. Short term mechanical studies confirmed that the incorporation of copper has reinforcing effect on the composites with 5 and 10% copper loadings and did not adversely affect the short-term mechanical performance of the polymer composites. These composite systems were shown to be active against Escherichia coli ATCC 8739 with >99.99% reduction in bacterial population. Corresponding ion release profiles for these composites indicated long term antimicrobial activity.