Lipoic acid functionalized SiO2@Ag nanoparticles. Synthesis, characterization and evaluation of biological activity

Oxo-Hydrazyl as a Substitute for the Stable Free Radicals Employed in Measuring Total Antioxidant Activity

Numerous standardized methods for evaluating antioxidant capacity are available, some of the most used methods in this regard employ stable free radicals, like 2,2-diphenyl-1-picrilhydrazyl free radical (DPPH·) or 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid cation radical (ABTS·+). However, some challenges can arise in taking correct and reproducible measurements due to the well-known unspecific reactivity of these free radicals. In pursuit of improving and expanding such methods, in this work is proposed a highly intense colored zwitterionic derivative of the DPPH· free radical, as a replacement for DPPH· and ABTS·+ derivatives. A discussion and comparison of the recognized methods are presented, demonstrating the very good potential of this non-radical compound.

Bioaccessibility of chlorogenic acid and curcumin co-encapsulated in double emulsions with the inner interface stabilized by functionalized silica nanoparticles

The aim of this study was to evaluate the bioaccessibility of chlorogenic acid (CA) and curcumin co-encapsulated in Pickering double emulsions (DEs) with the inner interface stabilized by hydrophobically modified silica nanoparticles with myristic acid (SNPs-C14) or tocopherol succinate (SNPs-TS). Both SNPs-C14 and SNPs-TS showed contact angles > 90°. Pickering W1/O emulsions were formulated with 4 % of both types of SNPs. Pickering DEs showed higher creaming stability (5-7 %, day 42) and higher CA encapsulation efficiency (EE; 80 %) than control DE. The EE of curcumin was > 98 % in all the DEs. CA was steadily released from Pickering DEs during digestion, achieving bioaccessibility values of 58-60 %. Curcumin was released during the intestinal phase (∼80 % bioaccessibility in all DEs). Co-loaded DEs showed similar bioaccessibility for CA and curcumin than single-loaded. SNPs-C14 and SNPs-TS were suitable to stabilize the W1:O interface of DEs as co-delivery systems of bioactive compounds with health-promoting properties.

Nanotechnological Approaches to Enhance the Potential of α-Lipoic Acid for Application in the Clinic

α-lipoic acid is a naturally occurring compound with potent antioxidant properties that helps protect cells and tissues from oxidative stress. Its incorporation into nanoplatforms can affect factors like bioavailability, stability, reactivity, and targeted delivery. Nanoformulations of α-lipoic acid can significantly enhance its solubility and absorption, making it more bioavailable. While α-lipoic acid can be prone to degradation in its free form, encapsulation within nanoparticles ensures its stability over time, and its release in a controlled and sustained manner to the targeted tissues and cells. In addition, α-lipoic acid can be combined with other compounds, such as other antioxidants, drugs, or nanomaterials, to create synergistic effects that enhance their overall therapeutic benefits or hinder their potential cytotoxicity. This review outlines the advantages and drawbacks associated with the use of α-lipoic acid, as well as various nanotechnological approaches employed to enhance its therapeutic effectiveness, whether alone or in combination with other bioactive agents. Furthermore, it describes the engineering of α-lipoic acid to produce poly(α-lipoic acid) nanoparticles, which hold promise as an effective drug delivery system.

Overexpression of Lias Gene Alleviates Cadmium-Induced Kidney Injury in Mice Involving Multiple Effects: Metabolism, Oxidative Stress, and Inflammation

Oxidative stress is an important mechanism underlying toxicity induced by cadmium (Cd) exposure. However, there are significant differences of the antioxidant baseline in different populations. This means that different human has different intensity of oxidative stress in vivo after exposure to toxicants. LiasH/H mouse is a specific model which is created by genetically modifying the Lias 3'-untranslated region (3'-UTR). LiasH/H mice express high levels of LA and have high endogenous antioxidant capacity which is approximately 150% higher than wild-type C57BL/6 J mice (WT, Lias+/+). But more importantly, they have dual roles of metal chelator and antioxidant. Here, we applied this mouse model to evaluate the effect of endogenous antioxidant levels in the body on alleviating Cd-induced renal injury including Cd metabolism, oxidative stress, and inflammation. In the experiment, mice drank water containing Cd (50 mg/L), for 12 weeks. Many biomarkers of Cd metabolism, oxidative stress, inflammation, and major pathological changes in the kidney were examined. The results showed overexpression of the Lias gene decreased Cd burden in the body of mice, mitigated oxidative stress, attenuated the inflammatory response, and subsequent alleviated cadmium-induced kidney injury in mice.

A silk-based hydrogel containing dexamethasone and lipoic acid microcrystals for local delivery to the inner ear

Local drug delivery has been exploited recently to treat hearing loss, as this method can both bypass the blood-labyrinth barrier and provide sustained drug release. Combined drug microcrystals (MCs) offer additional advantages for sensorineural hearing loss treatment via intratympanic (IT) injection due to their shape effect and combination strategy. In this study, to endow viscous effects of hydrogels, nonspherical dexamethasone (DEX) and lipoic acid (LA) MCs were incorporated into silk fibroin (SF) hydrogels, which were subsequently administered to the tympanic cavity to investigate their pharmaceutical properties. First, we prepared DEX and LA MCs by a traditional precipitation technique followed by SF hydrogel incorporation (SF+DEX+LA). After characterization of the physicochemical features, including morphology, rheology, and dissolution, both a suspension of combined DEX and LA MCs (DEX+LA) and SF+DEX+LA were administered to guinea pigs by IT injection, after which the pharmacokinetics, biodegradation and biocompatibility were evaluated. To our surprise, compared to the DEX+LA group, the pharmacokinetics of the SF+DEX+LA hydrogel group did not improve significantly, which may be ascribed to their nonspherical shape and deposition effects of the drugs MCs. The cochlear tissue in each group displayed good morphology, with no obvious inflammatory reactions. This combined MC suspension has the clear advantages of no vehicle, easy scale-up preparation, and good biocompatibility and outcomes, which paves the way for practical treatment of hearing loss via local drug delivery.

Green synthesis of aminated hyaluronic acid-based silver nanoparticles on modified titanium dioxide surface: Influence of size and chemical composition on their biological properties

This is the first report on an efficient, "environmentally friendly" chemical reduction method for the synthesis of aminated hyaluronic acid-based silver nanoparticles on the modified surface of titanium dioxide nanoparticles aimed for biological applications. Silver nanoparticles exhibit well-known physical-chemical and optical properties appropriate for different biological applications. Modifying the nanoparticles leads to a change in their expected bioactivity. This represents an important topic for the current research. We have developed a novel aminated hyaluronic acid (HA-EDA)-based protocol to obtain silver nanoparticles, in which HA-EDA was used for the first time as a reducing and stabilizing agent. The effect of the size of silver nanoparticles on the titanium dioxide surface and the chemical composition of the obtained materials were investigated by TEM, XRD, XPS, ATR-FTIR, Raman spectroscopy, NMR and H2-TPR analyses. The antioxidant, in vitro biocompatibility, and antimicrobial activity of the fabricated composites have been evaluated. The results prove that the prepared materials exhibit antimicrobial, antioxidant, and anti-inflammatory activity, thus providing protection against infection and supporting tissue regeneration, these two key effects being of paramount importance for promoting wound healing.

Controllable 3D Flower-Like Ag-CF Electrodes as Flexible Marine Electric Field Sensors with High Stability

Construction of three-dimensional (3D) flower-like nanostructures with controlled morphologies has emerged as an attractive tool by scientists in the marine electric field sensor research field due to their peculiar structural features. Herein, novel 3D flower-like Ag-CF capacitive composite electrodes have been created by an eco-friendly water-bath strategy via AgNO₃ as a sliver source and subsequently compounded with carbon fibers (CFs) pretreated by thermal oxidation. A series of electrode samples with various morphologies obtained by modulating different reaction times and temperatures bring about the dominant formation mechanism of these nanostructures and the influence behavior on the CF electrode in detail. Especially, the 3D flower-like Ag-CF electrode shows a large surface area acquired under the conditions of 80 °C and 15 min, which can provide more electroactive sites in electrochemical analysis and exhibit a maximum areal specific capacitance of 619.75 mF·cm^-2 at a scanning speed of 10 mV·s^-1. This is mainly due to the synergistic behavior of the unique 3D flower-like morphology and the large specific surface area of CFs. Furthermore, a cylinder-shaped Ag-CF sensor is designed, which delivers a superior potential difference of 33.08 μV, a potential difference drift of 18.62 μV/24 h for 30 days, and a self-noise of 0.92 nV/rt (Hz)@1 Hz. In this work, the intriguing synthesis strategy can be a promising facile approach to manufacture the controllable 3D flower-like Ag-CF electrode for electric field sensor applications.

Porous silicon surface modification via a microwave-induced in situ cyclic disulfide (S-S) cleavage and Si-S bond formation

Porous silicon (pSi) materials have gained a great deal of attention from various research fields, and their surface-functionalization is one of the critical points for their applications. In this study, a new surface modification method of Si-H-terminated pSi materials via microwave-induced Si-S bond formation is disclosed. The silicon hydride (Si-H) functionality on the pSi surface could react with the 5-membered cyclic disulfide (S-S) compound (DL-α-lipoic acid in this study) by microwave-induced in situ S-S bond cleavage and Si-S bond formation. This surface chemistry is fast responsive (<10 min) and more efficient than other methods such as vortexing, heating stirring, or ultrasonication. The reaction maintains the primary porous structure of pSi materials including pSi wafer, pSi rugate filer, and pSi nanoparticles. An additional functional group such as carboxylic acid is demonstrated to be readily introducible on the pSi surface for further applications. Overall, this study has successfully demonstrated the porous silicon surface modification via a microwave-induced in situ cyclic disulfide (S-S) cleavage and Si-S bond formation.

Novel Antitumor Agents Based on Fluorescent Benzofurazan Derivatives and Mesoporous Silica

Two novel fluorescent mesoporous silica-based hybrid materials were obtained through the covalent grafting of [4-hydrazinyl-7-nitrobenz-[2,1,3-d]-oxadiazole (NBDH) and N¹-(7-nitrobenzo[c][1,2,5]-oxadiazol-4-yl) benzene-1,2-diamine (NBD-PD), respectively, inside the channels of mesoporous silica SBA-15. The presence of fluorescent organic compounds (nitrobenzofurazan derivatives) was confirmed by infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), thermal analysis (TG), and fluorescence spectroscopy. The nitrogen physisorption analysis showed that the nitrobenzofurazan derivatives were distributed uniformly on the internal surface of SBA-15, the immobilization process having a negligible effect on the structure of the support. Their antioxidant activity was studied by measuring the ability to reduce free radicals DPPH (free radical scavenging activity), in order to formulate potential applications of the materials obtained. Cytotoxicity of the newly synthesized materials, SBA-NBDH and SBA-NBD-PD, was evaluated on human B16 melanoma cells. The morphology of these cells, internalization and localization of the investigated materials in melanoma and fibroblast cells were examined through fluorescence imaging. The viability of B16 (3D) spheroids after treatment with SBA-NBDH and SBA-NBD-PD was evaluated using MTS assay. The results showed that both materials induced a selective antiproliferative effect, reducing to various degrees the viability of melanoma cells. The observed effect was enhanced with increasing concentration. SBA-NBD-PD exhibited a higher antitumor effect compared to SBA-NBDH starting with a concentration of 125 µg/mL. In both cases, a significantly more pronounced antiproliferative effect on tumor cells compared to normal cells was observed. The viability of B16 spheroids dropped by 40% after treatment with SBA-NBDH and SBA-NBD-PD at 500 µg/mL concentration, indicating a clear cytotoxic effect of the tested compounds. These results suggest that both newly synthesized biomaterials could be promising antitumor agents for applications in cancer therapy.

Metabolomics analysis and membrane damage measurement reveal the antibacterial mechanism of lipoic acid against Yersinia enterocolitica

Yersinia enterocolitica is a pathogenic microorganism that can cause food-borne diseases. Lipoic acid (LA) has been used as an antioxidant against bacteria, but its antibacterial mechanism is rarely reported. This study aims to explore the antibacterial mechanism of LA and its effect on the metabolites of Y. enterocolitica through membrane damage and metabolomics analysis. The results showed that the minimum inhibitory concentration (MIC) of LA against Y. enterocolitica was 2.5 mg mL^-1. The membrane potential was depolarized, and intracellular pH (pH_in) and ATP were significantly reduced, indicating that LA destroys the cell membrane structure. Confocal laser scanning microscopy (CLSM) and field emission scanning electron microscopy (FESEM) further confirmed LA-induced cell membrane damage. The metabolic profile of Y. enterocolitica following LA treatment was analyzed by liquid chromatography-mass spectrometry (LC-MS). In the metabolome evaluation, 6209 differential metabolites were screened, including 3394 up-regulated and 2815 down-regulated metabolites. Fifteen metabolic pathways of Y. enterocolitica exhibited significant changes after LA treatment, including the pathways important for amino acid and nucleotide metabolism. The results show that LA is a bacteriostatic substance with potential application value in the food industry.

Novel fabrication of SiO2/Ag nanocomposite by gamma irradiated Fusarium oxysporum to combat Ralstonia solanacearum

The bacterial wilt is a global destructive plant disease that initiated by the phytopathogenic Ralstonia solanacearum. This study display a novel biofabrication of silica/silver nanocomposite using Fusarium oxysporum-fermented rice husk (RH) under solid state fermentation (SSF). The biofabricated nanocomposite was characterized by XRD, UV-Vis. spectroscopy, DLS, SEM, EDX elemental mapping, and TEM analyses as well as investigated for anti-R. solanacearum activity. Response surface methodology was also processed for optimizing the biofabrication process and improving the anti-bacterial activity of the fabricated nanocomposite. Maximum suppression zone of 29.5 mm against R. solanacearum was reached at optimum RH content of 6.0 g, AgNO3 concentration of 2.50 mM, reaction pH of 6.3, and reaction time of 2 days. The anti-R. solanacearum activity of the fabricated nanocomposite was further improved by exposing the F. oxysporum strain to a gamma irradiation dose of 200 Gy. In conclusion, RH recycling under SSF by F. oxysporum could provide an innovative, facile, non-expensive, and green approach for fabricating SiO2/Ag nanocomposite that could be applied efficiently as an eco-friendly antibacterial agent to combat R. solanacearum in agricultural applications. Moreover, the developed method could serve as a significant platform for the designing of new nanostructures for broad applications.