Sonochemical in situ immobilization of Pd nanoparticles on green tea extract coated Fe3O4 nanoparticles: An efficient and magnetically recyclable nanocatalyst for synthesis of biphenyl compounds under ultrasound irradiations

Novel nickel-immobilized-SiO2-TiO2 fine particles in the presence of cetyltrimethylammonium bromide as a catalyst for ultrasound-assisted-Kumada cross-coupling reaction

Kumada cross-coupling reaction is useful for producing biphenyls, where nickel and copper have been widely investigated as catalysts but mainly homogeneous ones. In this study, we investigated ultrasound-assisted-Kumada cross-coupling reaction over the heterogeneous catalysts in which Ni2+, Cu2+, or both was immobilized on aminopropylsilane-functionalized-SiO2-TiO2 prepared in the presence of cetyltrimethylammonium bromide (CTAB). The presence of CTAB effectively prevented the particle growth and therefore SiO2-TiO2 fine particles with high surface area (502 m2 g-1) were formed. The Ni2+-immobilized catalyst showed high catalytic activity for the ultrasound-assisted-Kumada cross-coupling reaction of a wide variety of substrates and was reusable three times. Performing the reaction under ultrasound irradiation was very effective in significantly accelerating the reaction rate compared with the conventional mechanical method. In contrast to Ni2+, Cu2+ was deposited on the support as crystalline Cu(OH)2 and the resulting catalysts with Cu2+ and Ni2+-Cu2+ were less active and less stable under the reaction conditions.

Chemical characterization and effect of Ziziphora clinopodioides green-synthesized silver nanoparticles on cytotoxicity, antioxidant, and antidiabetic activities in streptozotocin-induced hepatotoxicity in Wistar diabetic male rats

The present research studied the cytotoxicity, antioxidant, and antidiabetic activities of biogenically synthesized silver nanoparticles (AgNPs) using Ziziphora clinopodioides (Z. clinopodioides) as a green mediator. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) were employed to determine AgNPs. In the in vivo experiment, the model rats were categorized into different groups receiving 50, 100, 200, and 400 μg/kg of AgNPs and diabetic, positive, and normal groups (n = 10) using a random division. A single dose of streptozotocin (STZ) at 60 mg/kg was administered to induce diabetes and hepatotoxicity in rats. The administration of AgNPs was performed via intragastric administration for 25 days. On the final day, the levels of glucose and biochemical enzymes, namely aspartate aminotransferase (AST), alkaline phosphatase (ALP), alanine transaminase (ALT), and gamma-glutamyltransferase (GGT), were assessed in the serum. Following tissue processing, liver sections with a thickness of 5 μm were prepared. Later, the total volume of different liver components, such as hepatocytes, sinusoids, portal vein, central vein, hepatic arteries, and bile ducts, was measured. The portal vein and bile duct volumes did not vary significantly in groups treated by AgNPs. However, the volume of the central vein and hepatic arteries exhibited noticeable variations in groups treated by AgNPs. After administration of streptozotocin, the volume of hepatocytes and sinusoids increased significantly. However, treatment with a high dose of AgNPs significantly decreased the volume of hepatocytes and sinusoids. In diabetic rats, administering AgNPs reduced the fasting blood glucose levels compared to the model group. In addition, AgNPs decreased the elevated levels of AST and ALP enzymes in a manner that depended on the dosage of AgNPs used. This research demonstrates the hepatoprotective and antidiabetic properties of AgNPs, suggesting their potential implications as hepatoprotective and antidiabetic supplements to prevent diabetes.

One-pot green bio-assisted synthesis of highly active catalytic palladium nanoparticles in porcine gastric mucin for environmental applications

In this work, palladium nanoparticles were synthesized using one-pot synthesis utilizing porcine gastric mucin glycoproteins as reducing and capping agents. It is shown that the particles exhibited noticeable catalytic activity through both nitrophenol reduction and Suzuki-Miyaura coupling reactions. The catalytic performance was demonstrated with exceptionally high product yield, a fast reaction rate, and low catalyst use. The palladium-mucin composites obtained could be used in particle solution and as hydrogel catalysts to increase their reusability for at least ten reaction cycles with minimum loss in their catalytic effectiveness.

Green Synthesis of Silver Oxide Microparticles Using Green Tea Leaves Extract for an Efficient Removal of Malachite Green from Water: Synergistic Effect of Persulfate

The removal of water pollutants by photocatalysis is a promising technique, mainly due to its environmentally friendly and sustainable nature. In this study, the degradation of a recalcitrant organic pollutant, malachite green (MG), was investigated in water by a microstructured silver oxide photocatalyst. The silver oxide (Ag2O) microparticles (MPs) were synthesized by a low-cost, green method, mediated by green tea leaves extract. The surface, morphological and optical properties of the synthesized Ag2O MPs were determined by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, and ultraviolet-visible (UV-visible) spectrophotometry. The synthesized Ag2O MPs showed good photoactivity, represented by 83% degradation of malachite green (MG) ([C]0 = 0.4 mM, Ag2O loading = 0.1 g L−1) at neutral pH, in 3 h. Persulfate ions (PS) showed a strong synergistic effect on the efficiency of solar/Ag2O photocatalysis, represented by complete MG removal in 15 min, in the presence of 1.6 mM PS. The results revealed that solar/Ag2O, particularly solar/Ag2O/PS photocatalysis is a promising method for the elimination of toxic organic pollutants, such as malachite green, from the water environment.

Systematic and Bibliometric Analysis of Magnetite Nanoparticles and Their Applications in (Biomedical) Research

Recent reports show air pollutant magnetite nanoparticles (MNPs) in the brains of people with Alzheimer's disease (AD). Considering various field applications of MNPs because of developments in nanotechnology, the aim of this study is to identify major trends and data gaps in research on magnetite to allow for relevant environmental and health risk assessment. Herein, a bibliometric and systematic analysis of the published magnetite literature (n = 31 567) between 1990 to 2020 is completed. Following appraisal, publications (n = 244) are grouped into four time periods with the main research theme identified for each as 1990-1997 "oxides," 1998-2005 "ferric oxide," 2006-2013 "pathology," and 2014-2020 "animal model." Magnetite formation and catalytic activity dominate the first two time periods, with the last two focusing on the exploitation of nanoparticle engineering. Japan and China have the highest number of citations for articles published. Longitudinal analysis indicates that magnetite research for the past 30 years shifted from environmental and industrial applications, to biomedical and its potential toxic effects. Therefore, whilst this study presents the research profile of different countries, the development in research on MNPs, it also reveals that further studies on the effects of MNPs on human health is much needed.

Advances in Matrix-Supported Palladium Nanocatalysts for Water Treatment

Advanced catalysts are crucial for a wide range of chemical, pharmaceutical, energy, and environmental applications. They can reduce energy barriers and increase reaction rates for desirable transformations, making many critical large-scale processes feasible, eco-friendly, energy-efficient, and affordable. Advances in nanotechnology have ushered in a new era for heterogeneous catalysis. Nanoscale catalytic materials are known to surpass their conventional macro-sized counterparts in performance and precision, owing it to their ultra-high surface activities and unique size-dependent quantum properties. In water treatment, nanocatalysts can offer significant promise for novel and ecofriendly pollutant degradation technologies that can be tailored for customer-specific needs. In particular, nano-palladium catalysts have shown promise in degrading larger molecules, making them attractive for mitigating emerging contaminants. However, the applicability of nanomaterials, including nanocatalysts, in practical deployable and ecofriendly devices, is severely limited due to their easy proliferation into the service environment, which raises concerns of toxicity, material retrieval, reusability, and related cost and safety issues. To overcome this limitation, matrix-supported hybrid nanostructures, where nanocatalysts are integrated with other solids for stability and durability, can be employed. The interaction between the support and nanocatalysts becomes important in these materials and needs to be well investigated to better understand their physical, chemical, and catalytic behavior. This review paper presents an overview of recent studies on matrix-supported Pd-nanocatalysts and highlights some of the novel emerging concepts. The focus is on suitable approaches to integrate nanocatalysts in water treatment applications to mitigate emerging contaminants including halogenated molecules. The state-of-the-art supports for palladium nanocatalysts that can be deployed in water treatment systems are reviewed. In addition, research opportunities are emphasized to design robust, reusable, and ecofriendly nanocatalyst architecture.

Ag NPs supported chitosan-agarose modified Fe3O4 nanocomposite catalyzed synthesis of indazolo[2,1-b]phthalazines and anticancer studies against liver and lung cancer cells

In this article we report a novel Ag NPs fabricated chitosan-agarose composite functionalized core-shell type Fe₃O₄ nanoparticle (Ag/CS-Agar@Fe₃O₄). The biogenic material was analyzed over a number of physicochemical methods like, FT-IR, FE-SEM, TEM, EDX, XRD, VSM and ICP-OES. In catalytic exploration we aimed the synthesis of diverse 2H-indazolo0-b]phthalazine-trione derivatives via one-pot three component coupling of phathalalhydrazide, dimedone and different aldehydes. It afforded good to excellent yields under solvent-less conditions. Robustness of the catalyst was justified by catalyst recyclability for consecutive 10 times, hot filtration and leaching tests. Again, biological activity of the material was evaluated by studying the antioxidant and cytotoxicity properties over lung and liver cancer cell lines. Antioxidant potential of Ag/CS-Agar@Fe₃O₄ was assessed by DPPH radical scavenging studies and the corresponding IC50 was found to be 96.57 μg/mL. Liver and lung cancer studies over Ag/CS-Agar@Fe₃O₄ was carried out by MTT assay against HepG2 and A549 cell lines. The corresponding IC50 values were found as 192.35 and 365.28 μg/mL respectively. % Cell viability of the nanomaterial decreased dose dependently over both the cell lines without any cytotoxicity on normal cell line. The results demonstrates Ag/CS-Agar@Fe₃O₄ nanocomposite to be an efficient chemotherapeutic drug against the lung and hepatocellular carcinoma cells.

A convenient green protocol for oxidative esterification of arylaldehydes over Pd NPs decorated polyplex encapsulated Fe3O4 microspheres

A mild, competent and eco-friendly protocol has been developed for oxidative esterification of various aldehydes over a post-synthetically modified and Pd fabricated chitosan-starch dual functionalized Fe3O4 microspheres as a magnetically isolable heterogeneous and biocompatible nanocatalyst. Molecular O2 was used as an oxidant in the reaction. A series of aldehydes was directly esterified with MeOH in excellent yields without any pre-activation and involvement of harsh chemicals/conditions. Structural features of the catalyst were assessed through FT-IR, FE-SEM, TEM, EDX, molecular mapping, XRD, VSM and ICP-OES techniques. Due to magnetic core, the catalyst was easily isolated using an external magnet and reused for 8 times in succession, retaining its morphology and catalytic activity.

Naproxen release from carbon dot coated magnetite nanohybrid as versatile theranostics for HeLa cancer cells

Nanohybrid magnetite carbon dots (Fe₃O₄@CDs) were successfully synthesized to improve their applicability in multi-response bioimaging. The nanohybrid was prepared via pyrolysis and further loaded with naproxen (NAP) to promote drug delivery features. The characterization of the synthesized Fe₃O₄@CDs demonstrated the existence of Fe₃O₄ crystals by matching with JCPDS 75-0033 and its narrow size distribution at 11.30 nm; further, FTIR spectra confirmed the presence of Fe–O groups, C–O stretching, C–H sp², and C–O bending, along with dual-active fluorescence and magnetic responses. The nanohybrids also exhibit particular properties such as a maximum wavelength of 230.5 nm, maximum emission in the 320–420 nm range, and slight superparamagnetic reduction (Fe₃O₄: 0.93620 emu per g; Fe₃O₄@CDs: 0.64784 emu per g). The cytotoxicity assessment of the nanohybrid revealed an excellent half-maximal inhibitory concentration (IC₅₀) of 17 671.5 ± 1742.6 μg mL⁻¹. Then, the incorporation of NAP decreased the cell viability to below 10%. The kinetic release properties of NAP are also confirmed as pH-dependent, and they follow the Korsmeyer–Peppas kinetics model. These results indicated that the proposed Fe₃O₄@CDs can be used as a new model for theranostic treatment.

Nanohybrid magnetite carbon dots (Fe₃O₄@CDs) were successfully synthesized to improve their applicability in multi-response bioimaging.

Chitosan-starch biopolymer modified kaolin supported Pd nanoparticles for the oxidative esterification of aryl aldehydes

A mild and efficient green protocol has been disclosed for selective oxidative esterification of various aldehydes over a novel Pd fabricated chitosan-starch polyplex encapsulated Kaolin (Kaolin@CS-starch-Pd) as a heterogeneous and reusable biocompatible nanocatalyst. Molecular oxygen was used as an oxidizing agent to generate water as the sole by-product. A wide variety of aldehydes was converted to their methyl esters in high yields. The process involved gentle reaction conditions to avoid any type of pre-activation. Structural features of the catalyst were determined through FT-IR, FE-SEM, TEM, EDX, elemental mapping, XRD and ICP-OES analyses. The material was found to be stable enough toward Pd leaching. Durability of Kaolin@CS-starch-Pd was further justified by retaining its catalytic activity through successful reusability for several times.

Preparation and Application of a Hydrochar-Based Palladium Nanocatalyst for the Reduction of Nitroarenes

In the present study, a novel heterogeneous catalyst was successfully fabricated through the decoration of palladium nanoparticles on the surface of designed Fe3O4-coffee waste composite (Pd-Fe3O4-CWH) for the catalytic reduction of nitroarenes. Various characterization techniques such as XRD, FE-SEM and EDS were used to establish its nano-sized chemical structure. It was determined that Pd-Fe3O4-CWH is a useful nanocatalyst, which can efficiently reduce various nitroarenes, including 4-nitrobenzoic acid (4-NBA), 4-nitroaniline (4-NA), 4-nitro-o-phenylenediamine (4-NPD), 2-nitroaniline (2-NA) and 3-nitroanisole (3-NAS), using NaBH4 in aqueous media and ambient conditions. Catalytic reactions were monitored with the help of high-performance liquid chromatography. Additionally, Pd-Fe3O4-CWH was proved to be a reusable catalyst by maintaining its catalytic activity through six successive runs. Moreover, the nanocatalyst displayed a superior catalytic performance compared to other catalysts by providing a shorter reaction time to complete the reduction in nitroarenes.

In Situ Preparation of Composite Redox-Active Micelles Bearing Pd Nanoparticles for the Reduction of 4-Nitrophenol

Owing to the redox activity of the poly(ferrocenylsilane)-based polymer, several noble metal nanoparticles can be successfully prepared. As reported herein, the in situ preparation of Pd nanoparticles was performed using a redox-active platform of poly(ferrocenylmethylethylthiocarboxylpropylsilane) (PFC) micelles. PFC/Pd nanocomposites (NCs) with Pd nanoparticles uniformly dispersed at the surface of PFC nanospheres were obtained. The morphology of PFC/Pd NCs was further confirmed via high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. Taking advantage of Pd nanoparticles, the PFC/Pd NCs showed significant catalytic activity during the reduction process of 4-nitrophenol by sodium borohydride. Although PFC micelles themselves showed no catalytic activity, they promoted the catalytic behavior of Pd nanoparticles obviously by anchoring the Pd nanoparticles at their surface to avoid the aggregation and leaching of Pd nanoparticles. In all, PFC/Pd NCs exhibited great potential as a composite nanocatalyst. Moreover, the PFC micelle was found to be a desired platform for nanocatalysts.

Nanostructured materials via green sonochemical routes - Sustainability aspects

The production of environmentally friendly nanostructured materials with well-defined properties is a major challenge. Characteristics of the nanomaterials such as dimensionality, size and morphology strongly affect their performance in various applications. Additionally, sustainability considerations require an acceptable level of efficiency while being economically feasible and environmentally benign. The use of ultrasonic irradiation (UI) is a green and powerful technology, which can be applied for the synthesis of a variety of nanostructured materials. This review critically discusses the progress made in the fabrication of environmentally benign engineered nanomaterials with various dimensionalities (i.e., zero, one, two, or three dimensions) assisted by UI. The evolution and current status in this area are further illustrated using a scientometric approach. Application of UI for the synthesis of nanostructured materials has been also assessed according to the main sustainability pillars including the performance and environmental compatibility, as well as the relevant economic and social considerations. The outlook as well as recommendations for future research has been also provided and discussed towards the promotion of sustainable nanomaterials synthesis and application in various fields.

In situ decoration of Au NPs over polydopamine encapsulated GO/Fe3O4 nanoparticles as a recyclable nanocatalyst for the reduction of nitroarenes

A new and efficient catalyst has been designed and prepared via in situ immobilization of Au NPs fabricated polydopamine (PDA)-shelled Fe3O4 nanoparticle anchored over graphene oxide (GO) (GO/Fe3O4@PDA/Au). This novel, architecturally interesting magnetic nanocomposite was fully characterized using different analytical techniques such as Field Emission Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy, elemental mapping, Transmission Electron Microscopy, Fourier Transformed Infrared Spectroscopy, X-ray Diffraction and Inductively Coupled Plasma-Atomic Electron Spectroscopy. Catalytic activity of this material was successfully explored in the reduction of nitroarenes to their corresponding substituted anilines, using NaBH4 as reducing agent at ambient conditions. The most significant merits for this protocol were smooth and clean catalysis at room temperature with excellent productivity, sustainable conditions, ease of separation of catalyst from the reaction mixture by using a magnetic bar and most importantly reusability of the catalyst at least 8 times without any pre-activation, minimum loss of activity and considerable leaching.

Surface engineered iron oxide nanoparticles as efficient materials for antibiofilm application

Overuse of antibiotics has led to the development of multi drug resistant strains. Antibiotic resistance is a major drawback in the biomedical field since medical implants are prone to infection by biofilms of antibiotic resistant strains of bacteria. With increasing prevalence of antibiotic resistant pathogenic bacteria, the search for alternative method is utmost importance. In this regard, magnetic nanoparticles are commonly used as a substitute for antibiotics that can circumvent the problem of biofilms growth on the surface of biomedical implants. Iron oxide nanoparticles (IONPs) have unique magnetic properties that can be exploited in various ways in the biomedical applications. IONPs are engineered employing different methods to induce surface functionalization that include the use of polyethyleneimine and oleic acid. IONPs have a mechanical effect on biofilms when in presence of an external magnet. In this review, a detailed description of surface engineered magnetic nanoparticles as ideal antibacterial agents is provided, accompanied by various methods of literature review. This article is protected by copyright. All rights reserved.

Bio-inspired synthesis of palladium nanoparticles fabricated magnetic Fe3O4 nanocomposite over Fritillaria imperialis flower extract as an efficient recyclable catalyst for the reduction of nitroarenes

This current research is based on a bio-inspired procedure for the synthesis of biomolecule functionalized hybrid magnetic nanocomposite with the Fe3O4 NPs at core and Pd NPs at outer shell. The central idea was the initial modification of magnetic NP by the phytochemicals from Fritillaria imperialis flower extract, which was further exploited in the green reduction of Pd2+ ions into Pd NPs, in situ. The flower extract also acted as a capping agent for the obtained Pd/Fe3O4 composite without the need of additional toxic reagents. The as-synthesized Fe3O4@Fritillaria/Pd nanocomposite was methodically characterized over different physicochemical measures like FT-IR, ICP-AES, FESEM, EDX, TEM, XPS and VSM analysis. Thereafter, its catalytic potential was evaluated in the reduction of various nitrobenzenes to arylamines applying hydrazine hydrate as reductant in ethanol/water (1:2) medium under mild conditions. Furthermore, the nanocatalyst was retrieved using a bar magnet and recycled several times without considerable leaching or loss of activity. This green, bio-inspired ligand-free protocol has remarkable advantages like environmental friendliness, high yields, easy workup and reusability of the catalyst.

Gold nanoparticles decorated biguanidine modified mesoporous silica KIT-5 as recoverable heterogeneous catalyst for the reductive degradation of environmental contaminants

This current study involves the novel synthesis of Au nanoparticles (Au NPs) decorated biguanidine modified mesoporous silica KIT-5 following post-functionalization approach. The tiny Au NPs were being stabilized over the in situ prepared biguanidine ligand. The high surface area material was characterized using analytical techniques like Fourier Transformed infrared (FT-IR) spectroscopy, N2-adsorption-desorption isotherm, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray Diffraction study (XRD). Our material was found to be an efficient catalyst in the reductive degradation of harmful water contaminating organic dyes like Methylene blue (MB), Methyl Orange (MO) and Rhodamin B (RhB) in presence of NaBH4 at room temperature. The whole procedure was followed up with the help of time dependant UV-Vis spectroscopy. All the reactions followed pseudo-unimolecular kinetics and corresponding rate constant were determined. The reduction rate becomes high in presence of higher load of catalysts.

Biosynthesis of CuO nanoparticles using aqueous extract of herbal tea (Stachys Lavandulifolia) flowers and evaluation of its catalytic activity

Plant derived biogenic synthesis of nanoparticles (NP) has been the recent trend in material science as featured sustainable catalysts. A great deal of the current nanocatalytic research has been oriented on the bio-inspired green catalysts based on their wide applicability. In this context, CuO NPs are synthesized following a green approach using an herbal tea (Stachys Lavandulifolia) flower extract. The phytochemicals contained in it were used asthe internal reductant without applying harsh chemicals or strong heat. The derived nanoparticles also got stabilized by the biomolecular capping. The as-synthesized CuO NPs was characterized over FT-IR, FE-SEM, EDS, TEM, XRD, TGA and UV–Vis spectroscopy. These NPs were exploited as a competent catalyst in the aryl and heteroaryl C–heteroatom (N, O, S) cross coupling reactions affording outstanding yields. The nanocatalyst was isolated and recycled in 8 consecutive runs with reproducible catalytic activity. Rigidity of the CuO/S. Lavandulifolia nanocomposite was further justified by leaching test and heterogeneity test.

Ultrasound assisted synthesis of Pd NPs decorated chitosan-starch functionalized Fe3O4 nanocomposite catalyst towards Suzuki-Miyaura coupling and reduction of 4-nitrophenol

In recent days the nanomagnetic biocomposites have been evolved as sustainable green catalysts. In that context, we are prompted to design and synthesize a novel Pd NP adorned chitosan-starch dual biopolymer encapsulated core-shell type magnetic nanocomposite (Fe₃O₄@CS-Starch/Pd) in an eco-friendly pathway applying ultrasound irradiations. The morphological and physicochemical features of the material were determined using several advanced techniques like FT-IR, FESEM, HRTEM, EDX, atomic mapping, VSM, XRD and ICP-OES. Catalytic efficiency of the material was investigated in the ultrasound assisted classical Suzuki-Miyaura coupling towards the synthesis of diverse range of biaryl derivatives and in the catalytic reduction of 4-Nitrophenol.In both the protocols the catalyst exhibited excellent performances. Sonication had a significant role in enhancing the catalytic performances in both the reactions as compared to conventional heating. Due to super-paramagnetism, the catalyst was easily magnetically isolable and reused in 11 cycles without considerable leaching and change in reactivity.

An easily fabricated palladium nanocatalyst on magnetic biochar for Suzuki–Miyaura and aryl halide cyanation reactions

A sustainable biochar material for the synthesis of a novel heterogeneous catalyst for organic reactions is reported.

Immobilized Ag NPs on chitosan-biguanidine coated magnetic nanoparticles for synthesis of propargylamines and treatment of human lung cancer

The magnetically isolable nanobiocomposites have significant impact as the modified new generation catalysts in recent days. This has persuaded us to design and synthesis of a novel Ag NPs decorated biguanidine-chitosan (Bigua-CS) dual biomolecular functionalized core-shell type magnetic nanocomposite (Ag/Bigua-CS@Fe₃O₄). Bigua-CS could be introducing polysaccharide materials as potential coating agent to immobilizing and stabilizing metal nanoparticles. The material was characterized using several advanced techniques like fourier transformed infrared spectroscopy (FT-IR), inductively coupled plasma (ICP), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), atomic mapping, high resolution transmission electron microscopy (HR-TEM), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). Towards the chemical applications of the material, we headed the multicomponent synthesis of diverse propargylamines by A³ coupling in water, which ended up with excellent yields. Due to strong paramagnetism, the catalyst was easily isolable and reused in 9cycles without any leaching and considerable change in reactivity. In addition, the catalyst was engaged in biological assays like study of anti-oxidant properties by DPPH mediated free radical scavenging test using BHT as a reference molecule. Thereafter, on having a significant IC₅₀ value in radical scavenging assay, we extended the bio-application of the catalyst in anticancer study of adenocarcinoma cells of human lungs. The three different cancer cell lines, PC-14, LC-2/ad and HLC-1 were used in this regard. The best result was achieved in the case of PC-14 cell line with strong IC₅₀ values.

Decorated Au NPs on agar modified Fe3O4 NPs: Investigation of its catalytic performance in the degradation of methylene orange, and anti-human breast carcinoma properties

This work describes an eco-friendly approach for in situ immobilization of Au nanoparticles on the surface of Fe₃O₄ nanoparticles, with help of Agar and ultrasound irradiations, without using any toxic reducing and capping agents. The structure, morphology, and physicochemical properties were characterized by various analytical techniques such as Fourier transformed infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), inductively coupled plasma (ICP) and vibrating sample magnetometer (VSM). The desired catalyst showed great efficiency in the reductive degradation of methylene orange (MO) dye over NaBH₄ at room temperature. The MO was fully reduced in only 70 s and achieved rate constant of 9.6 × 10^-2 s^-1. The catalyst was reused for 10 runs without significant loss in catalytic activity. Cell viability of Fe₃O₄/agar/Au NPs was very low against breast adenocarcinoma (MCF7), breast carcinoma (Hs 578Bst), infiltrating ductal cell carcinoma (Hs 319.T), and metastatic carcinoma (MDA-MB-453) cell lines without any cytotoxicity on the normal cell line. According to the above findings, the Fe₃O₄/agar/Au NPs may be administrated for the treatment of several types of human breast carcinoma in humans.

In situ decorated Au NPs on pectin-modified Fe3O4 NPs as a novel magnetic nanocomposite (Fe3O4/Pectin/Au) for catalytic reduction of nitroarenes and investigation of its anti-human lung cancer activities

In recent days, the green synthesized nanomagnetic biocomposites have been evolved with tremendous potential as the future catalysts. This has encouraged us to design and synthesis of a novel Au NPs immobilized pectin modified magnetic nanoparticles (Fe₃O₄/Pectin/Au). It was meticulously characterized using advanced analytical techniques like FT-IR, FESEM, TEM, EDX, XPS, VSM, XRD and ICP-OES. We investigated the chemical applications of the material in the catalytic reduction of nitroarenes using N₂H₄.H₂O as the reducing agent in the EtOH/H₂O solvent without any promoters or ligands. Due to strong paramagnetism, the catalyst was easily recovered and reused in 11 cycles without considerable leaching or loss in reactivity. The green protocol involves several advantages like mild conditions, easy workup, high yields, and reusability of the catalyst. Furthermore, the desired nanocomposite was employed in biological studies like anti-oxidant assay by DPPH radical scavenging test. Subsequently, on exhibiting a good IC₅₀ value in the DPPH assay, we extended the bio-application of the Fe₃O₄/Pectin/Au in the anticancer study of adenocarcinoma cells of human lungs using three cancer cell lines, PC-14, LC-2/ad and HLC-1 and a normal cell line HUVEC. The best result was accomplished in PC-14 cell lines with the lowest IC₅₀ values.

Ag NPs on chitosan-alginate coated magnetite for synthesis of indazolo[2,1-b]phthalazines and human lung protective effects against α-Guttiferin

Biocomposite nanomaterials have been evolved as the new generation catalysts and therapeutic supplement in these days. Magnetically isolation has added new features to this category. This has encouraged us to synthesize a novel Ag NP adorned chitosan-alginate dual bio-polysaccharide (two of the more versatile polysaccharides) modified core-shell magnetic nanocomposite (Fe₃O₄/CS-Alg/Ag NPs). The material was meticulously characterized following different physicochemical techniques, such as, FT-IR, ICP-OES, FESEM, EDX, atomic mapping, TEM, VSM, XRD and XPS studies. The as synthesized material was catalytically explored in the one-pot multicomponent synthesis of biologically potent 2H-indazolo[2,1-b]phthalazine-trione derivatives involving a wide range of substrates. The reactions were ended up with excellent yields under solvent-free heating conditions. The catalyst recyclability, heterogeneity and leaching tests were performed to ensure its high stability and robustness. It could be reused as much as 10 times in succession with almost unchanged catalytic performances. In the lung protective part of the present research, the human lung toxicity was induced by α-Guttiferin. The cell viability of lung MRC-5, CCD19Lu, WI-38, and BEAS-2B cell lines was measured by trypan blue assay. Caspase-3 activity was assessed by the caspase activity colorimetric assay kit and mitochondrial membrane potential of lung cells was studied by Rhodamine123 fluorescence dye. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) test was used to show DNA fragmentation and apoptosis of lung cells. Also, the Rat inflammatory cytokine assay kit was used to measure the concentrations of inflammatory cytokines. The catalyst-treated cell cutlers significantly (p ≤ 0.01) reduced the DNA fragmentation, caspase-3 activity, and inflammatory cytokines concentrations, and raised the mitochondrial membrane potential and cell viability in the high concentration of α-Guttiferin-treated lung MRC-5, CCD19Lu, WI-38, and BEAS-2B cells. The best result of lung protective properties of catalyst against α-Guttiferin was seen in the high dose of catalyst i.e., 4 μg. DPPH test revealed similar antioxidant potentials for catalyst and butylated hydroxytoluene. The catalyst inhibited half of the DPPH molecules in the concentration of 171 μg/mL. According to the above results, catalyst can be administrated as a lung protective drug for the treatment of lung diseases after approving in the clinical trial studies in humans.