Synthesis and characterization of size-controlled nano-Cu2O deposited on alpha-zirconium phosphate with excellent antibacterial property

Covalently surface-grafting α‑zirconium phosphate nanoplatelets enables collagen fiber matrix with ultraviolet barrier, antibacterial, and flame-retardant properties

Manipulating the dispersibility and reactivity of two-dimensional nanomaterials in collagen fibers (CFs) matrix has aroused attention in the fabrication of multifunctional collagen-based nanocomposites. Here, α‑zirconium phosphate nanoplatelets (ZrP NPs) were surface-functionalized with gallic acid (GA) to afford ZrP-GA NPs for engineering CFs matrix. The influence of ZrP-GA NPs on the ultraviolet barrier, antibacterial, and flame-retardant properties of resultant CFs matrix were investigated. Microstructural analysis revealed that ZrP-GA NPs were dispersed and bound within the collagen fibrils and onto the collagen strands in the CFs matrix. The resultant CFs matrix also maintained typical D-periodic structures of collagen fibrils and native branching and interwoven structures of CFs networks with increased porosity and enhanced ultraviolet barrier properties. Inhibition zone testing presented excellent antibacterial activities of the CFs matrix owing to surface grafting of antibacterial GA. Thanks to enhanced dispersion and binding of ZrP NPs with the CFs matrix by surface-functionalization with GA, the resultant CFs matrix reduced the peak heat release rate and the total heat release by 42.9 % and 39.0 %, respectively, highlighting improved flame-retardant properties. We envision that two-dimensional nanomaterials possess great potential in developing reasonable collagen-based nanocomposites towards the manufacture of emergent multifunctional collagen fibers-based wearable electronics.

Biogenic zinc oxide nanoparticles: A viable agricultural tool to control plant pathogenic fungi and its potential effects on soil and plants

Fungal and bacterial pathogens represent some of the greatest challenges facing crop production globally and account for about 20-40 % crop losses annually. This review highlights the use of ZnO NPs as antimicrobial agents and explores their mechanisms of actions against disease causing plant fungal pathogens. The behavior of ZnO NPs in soil and their interactions with the soil components were also highlighted. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. In addition, the reduction of ZnO NPs toxicity through surface modification and coating with silica is also addressed. Soil properties play a significant role in the dispersal, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transport of ZnO NPs into the soil might influence soil components and, as a result, plant physiology. The harmful effects of ZnO NPs on plants and fungi are caused by a variety of processes, the most important of which is the formation of reactive oxygen species, lysosomal instability, DNA damage, and the reduction of oxidative stress by direct penetration/liberation of Zn2+ ions in plant/fungal cells. Based on these highlighted areas, this review concludes that ZnO NPs exhibit its antifungal activity via generations of reactive oxygen species, coupled with the inhibition of various metabolic pathways. Despite the numerous advantages of ZnO NPs, there is need to regulate its uses to minimize the harmful effects that may arise from its applications in the soil and plants.

Research progress in preparation, properties, and applications of medical protective fiber materials

A variety of public health events seriously threaten human life and health, especially the outbreak of COVID-19 at the end of 2019 has caused a serious impact on human production and life. Wearing personal protective equipment (PPE) is one of the most effective ways to prevent infection and stop the spread of the virus. Medical protective fiber materials have become the first choice for PPE because of their excellent barrier properties and breathability. In this article, we systematically review the latest progress in preparation technologies, properties, and applications of medical protective fiber materials. We first summarize the technological characteristics of different fiber preparation methods and compare their advantages and disadvantages. Then the barrier properties, comfort, and mechanical properties of the medical protective fiber materials used in PPE are discussed. After that, the applications of medical protective fibers in PPE are introduced, and protective clothing and masks are discussed in detail. Finally, the current status, future development trend, and existing challenges of medical protective fiber materials are summarized.

Antimicrobial Nanomaterials as Advanced Coatings for Self-Sanitizing of Textile Clothing and Personal Protective Equipment

Controlling bioaerosols has become increasingly critical in affecting human health. Natural product treatment in the nano form is a potential method since it has lower toxicity than inorganic nanomaterials like silver nanoparticles. This research is important for the creation of a bioaerosol control system that is effective. Nanoparticles (NPs) are gradually being employed to use bacteria as a nonantibiotic substitute for treating bacterial infections. The present study looks at nanoparticles' antimicrobial properties, their method of action, their impact on drug-opposing bacteria, and the hazards connected with their operation as antimicrobial agents. The aspects that influence nanoparticle conduct in clinical settings, as well as their distinctive features and mode of action as antibacterial assistants, are thoroughly examined. Nanoparticles' action on bacterial cells is presently accepted by way of the introduction of oxidative stress induction, metal-ion release, and nonoxidative methods. Because many concurrent mechanisms of action against germs would necessitate multiple simultaneous gene modifications in the same bacterial cell for antibacterial protection to evolve, bacterial cells developing resistance to NPs is difficult. This review discusses the antimicrobial function of NPs against microbes and presents a comprehensive discussion of the bioaerosols: their origin, hazards, and their prevention. This state of the art method is dependent upon the use of personal protective gear against these bioaerosols. The benefit of the utmost significant categories of metal nanoparticles as antibacterial agents is given important consideration. The novelty of this review depends upon the antimicrobial properties of (a) silver (Ag), (b) zinc oxide (ZnO), and (c) copper oxide (CuO) nanoparticles. The value-added features of these nanoparticles are discussed, as well as their physicochemical characterization and pharmacokinetics, including the toxicological danger they pose to people. Lastly, the effective role of nanomaterials and their future in human wellness is discussed.

Design and Study of Mountaineering Wear Based on Nano Antibacterial Technology and Prediction Model

In order to improve function of mountaineering wear to promote the development of outer mountaineering wear industry, nano antibacterial technology is applied to make mountaineering wear. Firstly, the antibacterial properties of nano materials are discussed. Secondly, the antibacterial performance experiment of nano Ag ion is design, and experimental results show that the antibacterial performance of nano Ag ion, and nano Ag ion has better antibacterial effect on staphylococcus aureus, Escherichia coli, and candida albicans. Thirdly, the antibacterial performance prediction model of nano materials is constructed based on wavelet neural network, and then the training algorithm is designed. Finally, the prediction simulation analysis of antibacterial performance of nano Ag ion in moutaineering wear is carried out, results show that the wavelet neural network has good prediction effect, prediction results from wavelet neural network are agreed with real values, therefore the wavelet neural network has higher prediction precision.

Bioinspired Spiky Peroxidase-Mimics for Localized Bacterial Capture and Synergistic Catalytic Sterilization

Besides the pandemic caused by the coronavirus outbreak, many other pathogenic microbes also pose a devastating threat to human health, for instance, pathogenic bacteria. Due to the lack of broad-spectrum antibiotics, it is urgent to develop nonantibiotic strategies to fight bacteria. Herein, inspired by the localized "capture and killing" action of bacteriophages, a virus-like peroxidase-mimic (V-POD-M) is synthesized for efficient bacterial capture (mesoporous spiky structures) and synergistic catalytic sterilization (metal-organic-framework-derived catalytic core). Experimental and theoretical calculations show that the active compound, MoO₃ , can serve as a peroxo-complex-intermediate to reduce the free energy for catalyzing H₂ O₂ , which mainly benefits the generation of •OH radicals. The unique virus-like spikes endow the V-POD-M with fast bacterial capture and killing abilities (nearly 100% at 16 µg mL^-1 ). Furthermore, the in vivo experiments show that V-POD-M possesses similar disinfection treatment and wound skin recovery efficiencies to vancomycin. It is suggested that this inexpensive, durable, and highly reactive oxygen species (ROS) catalytic active V-POD-M provides a promising broad-spectrum therapy for nonantibiotic disinfection.

Jelly-Inspired Injectable Guided Tissue Regeneration Strategy with Shape Auto-Matched and Dual-Light-Defined Antibacterial/Osteogenic Pattern Switch Properties

Periodontitis is a bacterial infectious disease leading to the loss of periodontal supporting tissues and teeth. The current guided tissue regeneration (GTR) membranes for periodontitis treatments cannot effectively promote tissue regeneration for the limited antibacterial properties and the excessively fast degradation rate. Besides, they need extra tailoring according to variform defects before implantation, leading to imprecise match. This study proposed an injectable sodium alginate hydrogel composite (CTP-SA) doped with cubic cuprous oxide (Cu₂O) and polydopamine-coated titanium dioxide (TiO₂@PDA) nanoparticles for GTR. Inspired by the gelation process of the jelly, the phase change (liquid to solid) of CTP-SA after injection could automatch variform bone defects. Meanwhile, CTP-SA exhibited broad-spectrum antibacterial capabilities under blue light (BL) irradiation, including Streptococcus mutans (one of the most abundant bacteria in oral biofilms). Moreover, the reactive oxygen species released under BL excitation could accelerate the oxidation of Cu⁺ to Cu²⁺. Afterward, osteogenesis could be enhanced through two factors simultaneously: the stimulation of newly formed Cu²⁺ and the photothermal effect of CTP-SA under near-infrared (NIR) irradiation. Collectively, through this dual-light (blue and NIR) noninvasive regulation, CTP-SA could switch antibacterial and osteogenic modes to address requirements of patients at different healing stages, thereby realizing the customized GTR procedures.

Progress and Perspective of Antiviral Protective Material

Public health events caused by viruses pose a significant risk to humans worldwide. From December 2019 till now, the rampant novel 2019 coronavirus (SAR-CoV-2) has hugely impacted China and over world. Regarding a commendable means of protection, mask technology is relatively mature, though most of the masks cannot effectively resist the viral infections. The key material of the mask is a non-woven material, which makes the barrier of virus through filtration. Due to the lack of the ability to kill the viruses, masks are prone to cross-infection and become an additional source of infection after being discarded. If the filteration and antiviral effects can be simultaneously integrated into the mask, it will be more effcient, work for a longer time and create less difficulty in post-treatment. This mini-review presents the advances in antiviral materials, different  mechanisms of their activity, and their potential applications in personal protective fabrics. Furthermore, the article addresses the future challenges and directions of mask technology.

Cellulose acetate/multi-wall carbon nanotube/Ag nanofiber composite for antibacterial applications

Herein we propose cellulose acetate/carbon nanotube/silver nanoparticles (CA/CNT/Ag) nanofiber composite for antibacterial applications. The nanofiber composite are expected to avoid harmful effects of silver (i.e. argyria and argyrosis) owing to anchoring of silver nanoparticles on carbon nanotubes (CNTs) and embedding of the composite inside cellulose acetate (CA) matrix. The carbon nanotubes/silver nanoparticles (CNT/Ag) nanocomposite localized inside the CA polymer matrix allow minimal/no direct contact of silver nanoparticles with human cells and are expected to show reduced silver leaching. The cellulose acetate (CA) nanofibers loaded with silver nanoparticles anchored multiwall carbon nanotubes (CNT/Ag) were fabricated by electrospinning. The samples were studied with scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), Fourier transform infra-red spectroscopy (FTIR), tensile strength tests and antibacterial assays. Synthesis of the CNT/Ag nanocomposite was confirmed with XPS, XRD, EDS and TEM analysis. SEM images showed regular morphology of the CA/CNT/Ag nanofiber composites. TEM images depicted anchoring of silver nanoparticles on CNTs and embedding of CNT/Ag in the CA nanofiber matrix. The antibacterial test results demonstrated excellent antibacterial performance of the CA/CNT/Ag. The CA/CNT/Ag samples ensured effective bacterial growth inhibition on agar plates, in liquid medium (optical density, OD_590nm) (for 48 h) and in bactericidal assay (relative cell viability, %). Our results suggested CA/CNT/Ag composite nanofibers as potential candidate for safer antibacterial applications.