Dose dependent enhanced antibacterial effects and reduced biofilm activity against Bacillus subtilis in presence of ZnO nanoparticles

Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type

Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.

6-Aza-2-Thiothymine-Capped Gold Nanoclusters as Robust Antimicrobial Nanoagents for Eradicating Multidrug-Resistant Escherichia coli Infection

Multidrug-resistant bacterial infections, especially those caused by multidrug-resistant Escherichia coli (E. coli) bacteria, are an ever-growing threat because of the shrinking arsenal of efficacious antibiotics. Therefore, it is urgently needed to develop a kind of novel, long-term antibacterial agent effectively overcome resistant bacteria. Herein, we present a novel designed antibacterial agent-6-Aza-2-thiothymine-capped gold nanoclusters (ATT-AuNCs), which show excellent antibacterial activity against multidrug-resistant E. coli bacteria. The prepared AuNCs could permeabilize into the bacterial cell membrane via binding with a bivalent cation (e.g., Ca2+), followed by the generation of reactive oxygen species (e.g., •OH and •O2-), ultimately resulting in protein leakage from compromised cell membranes, inducing DNA damage and upregulating pro-oxidative genes intracellular. The AuNCs also speed up the wound healing process without noticeable hemolytic activity or cytotoxicity to erythrocytes and mammalian tissue. Altogether, the results indicate the great promise of ATT-AuNCs for treating multidrug-resistant E. coli bacterial infection.

Antibacterial and antibiofilm efficacy of green synthesized ZnO nanoparticles using Saraca asoca leaves

Biofilms are made up of bacterial colonies and their extracellular polymeric substances (EPS) matrix, which protects the bacteria from adverse environmental conditions. The increasing drug resistivity of pathogenic bacteria is becoming an emergency for developing new antibacterial agents. In this study, we have synthesized the zinc oxide nanoparticles (ZnO NPs) using the leaf extract of Saraca asoca plant, and the antibacterial and antibiofilm activity of green synthesized ZnO NPs was measured against the biofilm-producing bacteria Bacillus subtilis. The disk diffusion data reveals that the zone of inhibition (ZOI) starts at a concentration of 0.5 mg/mL and minimum inhibition concentration (100 µg/mL) and minimum bactericidal concentration (150 µg/mL) values were also evaluated for green synthesized ZnO nanomaterials. Crystal violet test and microscopic examination were used to assess the impact of produced nanoparticles on biofilm development. The findings indicated a nearly 45%, 64%, and 83% suppression of biofilm development at 0.5 × MIC, 0.75 × MIC, and 1 × MIC value, respectively. The biofilm biomass of the preformed or matured biofilms by the ZnO NPs was evaluated to be 68%, 50%, and 33% at concentrations of 0.5 × MIC, 0.75 × MIC, and 1 × MIC which was concentration-dependent. Moreover, flow cytometry results suggest damage to the bacterial cell membrane. The data indicated that the proportion of dead cells increased with NP concentration in comparison to the control. Therefore, it can be concluded that the green synthetic ZnO nanoparticles showed excellent antibacterial and antibiofilm activity against the Bacillus subtilis bacteria that produce biofilms and that they could be a promising substitute agent for the treatment of biofilms and drug-resistant bacteria.

Effect of Sublethal Concentrations of Zinc Oxide Nanoparticles on Bacillus cereus

Zinc oxide nanoparticles (ZnONPs), which are produced on a large scale, pose a potential threat to various environments because they can interact with the microbial populations found in them. Bacteria that are widespread in soil, water, and plant material include the Bacillus cereus group, which plays an important role in biodegradation and the nutrient cycle and is a major factor determining ecological balance. This group includes, among others, the foodborne pathogen B. cereus sensu stricto (herein referred to as B. cereus). The aim of this study was a comprehensive assessment of the effects of commercially available ZnONPs on B. cereus. The MIC (minimum inhibitory concentration) for B. cereus was 1.6 mg/mL, and the MBC (minimum bactericidal concentration) was 1.8 mg/mL. Growth of B. cereus was inhibited by a concentration of ZnONPs lower than or equal to MIC50. Concentrations from 0.2 to 0.8 mg/mL inhibited the growth of these bacteria in liquid media, induced symptoms of oxidative stress, and stimulated an environmental stress response in the form of biofilm and endospore formation. In addition, ZnONPs negatively affected the ability of the bacteria to break down the azo dye Evans Blue but enhanced the antimicrobial properties of phenolic compounds. Sublethal concentrations of ZnONPs generally decreased the activity of B. cereus cells, especially in the presence of phenolics, which indicates their potential toxicological impact, but at the same time they induced universal defence responses in these cells, which in the case of potential pathogens can hinder their removal.

Nanotechnology: the Alternative and Efficient Solution to Biofouling in the Aquaculture Industry

Biofouling is a global issue in aquaculture industries. It adversely affects marine infrastructure (ship's hulls, mariculture cages and nets, underwater pipes and filters, building materials, probes, and sensor devices). The estimated cost of managing marine biofouling accounts for 5-10% of production cost. Non-toxic foul-release coating and biocide-based coating are the two current approaches. Recent innovation and development of a surface coating with nanoparticles such as photocatalytic zinc oxide nanocoating on fishing nets, copper oxide nanocoating on the water-cooling system, and silver nanoparticle coating to inhibit microalgal adhesion on submerged surfaces under natural light (photoperiod) could present meaningful anti-biofouling application. Nanocoating of zinc, copper, and silver oxide is an environmentally friendly surface coating strategy that avoid surface adhesion of bacteria, diatoms, algal, protozoans, and fungal species. Such nanocoating could also provide a solution to strains tolerant to Cu, Zn, and Ag. This draft of the special issue demonstrates the anti-biofouling potential of various metal and metal oxide nanoparticle coating to combat aquaculture industry biofouling problems.

Synthetic Antibacterial Quaternary Phosphorus Salts Promote Methicillin-Resistant Staphylococcus aureus-Infected Wound Healing

Background

Drug-resistant microbes pose a global health concern, requiring the urgent development of effective antibacterial agents and strategies in clinical practice. Therefore, there is an urgent need to explore novel antibacterial materials to effectively eliminate bacteria. The synthesis of quaternary phosphonium salt in haloargentate systems, wherein the phosphorus atom is represented in a cationic form, is a possible strategy for the development of antibacterial materials.

Methods

Using (triphenyl)phosphonium-based quaternary phosphorus salts with different spacer lengths (n=2, 4, 6) as a template, we designed three kinds of quaternary phosphorus salts as effective antibacterial agents against drug-resistant bacteria.

Results

The synthesized quaternary phosphorus salt of (1,4-DBTPP)Br₂ effectively prevented the formation of the bacterial biofilms, and degraded bacterial membranes and cell walls by promoting the production of reactive oxygen species, which exhibited effective therapeutic effects in a rat model of a superficial wound infected with methicillin-resistant Staphylococcus aureus.

Conclusion

The quaternary phosphorus salt (1,4-DBTPP)Br₂ demonstrated hemocompatibility and low toxicity, revealing its potential in the treatment of clinical infections.

Model Study for Interaction of Sublethal Doses of Zinc Oxide Nanoparticles with Environmentally Beneficial Bacteria Bacillus thuringiensis and Bacillus megaterium

Zinc oxide nanoparticles (ZnO NPs), due to their antibacterial effects, are commonly used in various branches of the economy and can affect rhizobacteria that promote plant growth. We describe the effect of ZnO NPs on two model bacteria strains, B. thuringiensis and B. megaterium, that play an important role in the environment. The MIC (minimum inhibitory concentration) value determined after 48 h of incubation with ZnO NPs was more than 1.6 mg/mL for both strains tested, while the MBC (minimum bactericidal concentration) was above 1.8 mg/mL. We tested the effect of ZnO NPs at concentrations below the MIC (0.8 mg/mL, 0.4 mg/mL and 0.2 mg/mL (equal to 50%, 25% and 12,5% MIC, respectively) in order to identify the mechanisms activated by Bacillus species in the presence of these nanoparticles. ZnO NPs in sublethal concentrations inhibited planktonic cell growth, stimulated endospore formation and reduced decolorization of Evans blue. The addition of ZnO NPs caused oxidative stress, measured using nitroblue tetrazolium (NBT), and reduced the activity of catalase. It was confirmed that zinc oxide nanoparticles in sublethal concentrations change metabolic processes in Bacillus bacteria that are important for their effects on the environment. B. thuringiensis after treatment with ZnO NPs decreased indole acetic acid (IAA) production and increased biofilm formation, whereas B. megaterium decreased IAA production but, inversely, increased biofilm formation. Comparison of different Bacillus species in a single experiment made it possible to better understand the mechanisms of toxicity of zinc oxide nanoparticles and the individual reactions of closely related bacterial species.

Sustainable Amelioration of Heavy Metals in Soil Ecosystem: Existing Developments to Emerging Trends

The consequences of heavy metal contamination are progressively degrading soil quality in this modern period of industry. Due to this reason, improvement of the soil quality is necessary. Remediation is a method of removing pollutants from the root zone of plants in order to minimize stress and increase yield of plants grown in it. The use of plants to remove toxins from the soil, such as heavy metals, trace elements, organic chemicals, and radioactive substances, is referred to as bioremediation. Biochar and fly ash techniques are also studied for effectiveness in improving the quality of contaminated soil. This review compiles amelioration technologies and how they are used in the field. It also explains how nanoparticles are becoming a popular method of desalination, as well as how they can be employed in heavy metal phytoremediation.

A Machine Learning Tool to Predict the Antibacterial Capacity of Nanoparticles

The emergence and rapid spread of multidrug-resistant bacteria strains are a public health concern. This emergence is caused by the overuse and misuse of antibiotics leading to the evolution of antibiotic-resistant strains. Nanoparticles (NPs) are objects with all three external dimensions in the nanoscale that varies from 1 to 100 nm. Research on NPs with enhanced antimicrobial activity as alternatives to antibiotics has grown due to the increased incidence of nosocomial and community acquired infections caused by pathogens. Machine learning (ML) tools have been used in the field of nanoinformatics with promising results. As a consequence of evident achievements on a wide range of predictive tasks, ML techniques are attracting significant interest across a variety of stakeholders. In this article, we present an ML tool that successfully predicts the antibacterial capacity of NPs while the model's validation demonstrates encouraging results (R2 = 0.78). The data were compiled after a literature review of 60 articles and consist of key physico-chemical (p-chem) properties and experimental conditions (exposure variables and bacterial clustering) from in vitro studies. Following data homogenization and pre-processing, we trained various regression algorithms and we validated them using diverse performance metrics. Finally, an important attribute evaluation, which ranks the attributes that are most important in predicting the outcome, was performed. The attribute importance revealed that NP core size, the exposure dose, and the species of bacterium are key variables in predicting the antibacterial effect of NPs. This tool assists various stakeholders and scientists in predicting the antibacterial effects of NPs based on their p-chem properties and diverse exposure settings. This concept also aids the safe-by-design paradigm by incorporating functionality tools.

Exploration of the antibacterial and wound healing potential of a PLGA/silk fibroin based electrospun membrane loaded with zinc oxide nanoparticles

Zinc oxide nanoparticles (ZnO NPs) are known for their antibacterial, antioxidant, and anti-inflammatory activities. Moreover, ZnO NPs can stimulate cell migration, re-epithelialization, and angiogenesis. All these attributes are highly relevant to wound healing. Local administration of ZnO NPs to the wound can be achieved through electrospun nanofibers. We hypothesized that the use of poly(lactide-co-glycolic acid) (PLGA)/silk fibroin (SF) nanofiber-based delivery of ZnO would maintain the bioavailability of NPs on the wound area and synchronization with the unique structural features of electrospun nanofibers, could stimulate wound closure, re-epithelialization, collagen deposition, cellular migration, and angiogenesis. In this study, we fabricated PLGA/SF (PS) nanofibrous (NF) membranes with and without ZnO NPs and extensively characterized them for various physicochemical and biological attributes. Scanning electron microscopy (SEM) revealed smooth fibers and ZnO concentration-dependent increase in the fiber diameter. Transmission electron microscopy (TEM) also confirmed the encapsulation of ZnO NPs in the polymer matrix. The successful loading of ZnO was further confirmed by X-ray diffraction. Furthermore, mechanical testing revealed a ZnO concentration-dependent increase in the tensile strength. Moreover, biocompatibility was evaluated through in vitro cell culture. A mild anti-oxidant activity was also noted mainly due to the presence of silk fibroin. In vitro antibacterial tests revealed a ZnO concentration-dependent increase in antibacterial activity and PLGA/SF/3% ZnO (PSZ3) remained completely active against E. coli and S. aureus. More importantly, NF membranes were evaluated for their in vivo wound healing potential. The PSZ3 NF membrane not only facilitated the early wound closure but also remarkably enhanced the quality of wound healing confirmed through histopathological analysis. Re-epithelialization, granulation tissue formation, collagen deposition, and angiogenesis are some of the key parameters significantly boosted by ZnO loaded composite NF membranes. Based on extensive characterization and biological evaluation, the PSZ3 NF membrane has turned out to be a potential candidate for wound healing applications.

ZnO nanoparticles as photodegradation agent controlled by morphology and boron doping

ZnO nanoparticles with different morphology and doping possess different atomic planes at their interfaces. This changed their catalytic efficiency during degradation experiments with dyes, significantly dependent also on used dopant concentrations.