MC3T3-E1 cell response to microporous tantalum oxide surfaces enriched with Ca, P and Mg

Genetic Profiling of MC3T3-E1 Cells in Different Media: Implications for In Vitro Screening Development

Background/Objectives: The translation of in vitro biomaterial evaluations into successful clinical applications often fails due to discrepancies with in vivo results. Previously, we demonstrated that differences in culture medium conditions influence the bone formation process. This study aimed to investigate the influence of culture media on gene expression during calcification induction in osteoblasts. Methods: Using MC3T3-E1 cells cultured in α Minimum Essential Medium without L-ascorbic acid (αMEM(-)) and Dulbecco's Modified Eagle Medium (DMEM), we screened gene expression profiles through microarray analysis and validated key findings with quantitative PCR. Additionally, we compared these gene expression patterns with those in primary osteoblasts (POBs) cultured under the same medium conditions. Results: The results revealed distinct gene expression profiles in MC3T3-E1 cells depending on the culture medium, while POBs exhibited minimal differences between media, except for the gene Alpl. In αMEM(-), Alpl expression in POBs was significantly increased approximately 4-fold via calcification stimulation (p < 0.0001). POBs cultured in DMEM showed calcification appearance differing from the αMEM(-) condition, even though no significant increase in Alpl expression via calcification stimulation was observed. Conclusions: Differences in media appear to remarkably impact osteoblast gene expression and mineralization. These findings may help improve biomaterial evaluation when transitioning from in vitro assessments to in vivo evaluations. Moreover, our results suggest the possibility that gene expression differences observed in MC3T3-E1 cells reflect the diverse bone formation processes in vivo. Focusing on these genes could facilitate the development of screening methods for bone formation, supporting future clinical applications in orthopedics.

Effects of Zn-ZnO Core-Shell Nanoparticles on Antimicrobial Mechanisms and Immune Cell Activation

The deposition of zinc-zinc oxide nanoparticles (Zn-ZnO NPs) onto porous Ta2O5 surfaces enriched with calcium phosphate by DC magnetron sputtering was investigated to improve the surface antimicrobial activity without triggering an inflammatory response. Different sizes and amounts of Zn NPs obtained by two optimized different depositions and an additional thin carbon (C) layer deposited over the NPs were explored. The deposition of the Zn NPs and the C layer mitigates the surface porosity, increasing the surface hydrophobicity and decreasing the surface roughness. The possible antimicrobial effect and immune system activation of Zn-ZnO NPs were investigated in Candida albicans and macrophage cells, respectively. It was found that the developed surfaces displayed a fungistatic behavior, as they impair the growth of C. albicans between 5 and 24 h of culture. This behavior was more evident on the surfaces with bigger NPs and the highest amounts of Zn. The same trend was observed in both reactive oxygen species (ROS) generation and loss of C. albicans' membrane integrity. After 24 h of culture, cell toxicity was also dependent on the amount of the NPs. Cell toxicity was observed in surfaces with the highest amount of Zn NPs and with the C layer, while cells were able to grow without any signs of cytotoxicity in the porous surfaces with the lowest amount of NPs. The same Zn-dose-dependent behavior was noticed in the TNF-α production. The Zn-containing surfaces show a vastly inferior cytokine secretion than the lipopolysaccharide (LPS)-stimulated cells, indicating that the modified surfaces do not induce an inflammatory response from macrophage cells. This study provides insights for understanding the Zn amount threshold that allows a simultaneous inhibition of the fungi growth with no toxic effect and the main antimicrobial mechanisms of Zn-ZnO NPs, contributing to future clinical applications.

Polyetheretherketone development in bone tissue engineering and orthopedic surgery

Polyetheretherketone (PEEK) has been widely used in the medical field as an implant material, especially in bone tissue engineering and orthopedic surgery, in recent years. This material exhibits superior stability at high temperatures and is biosecured without harmful reactions. However, the chemical and biological inertness of PEEK still limits its applications. Recently, many approaches have been applied to improve its performance, including the modulation of physical morphology, chemical composition and antimicrobial agents, which advanced the osteointegration as well as antibacterial properties of PEEK materials. Based on the evolution of PEEK biomedical devices, many studies on the use of PEEK implants in spine surgery, joint surgery and trauma repair have been performed in the past few years, in most of which PEEK implants show better outcomes than traditional metal implants. This paper summarizes recent studies on the modification and application of biomedical PEEK materials, which provides further research directions for PEEK implants.

Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers

Patients suffering bone fractures in different parts of the body require implants that will enable similar function to that of the natural bone that they are replacing. Joint diseases (rheumatoid arthritis and osteoarthritis) also require surgical intervention with implants such as hip and knee joint replacement. Biomaterial implants are utilized to fix fractures or replace parts of the body. For the majority of these implant cases, either metal or polymer biomaterials are chosen in order to have a similar functional capacity to the original bone material. The biomaterials that are employed most often for implants of bone fracture are metals such as stainless steel and titanium, and polymers such as polyethene and polyetheretherketone (PEEK). This review compared metallic and synthetic polymer implant biomaterials that can be employed to secure load-bearing bone fractures due to their ability to withstand the mechanical stresses and strains of the body, with a focus on their classification, properties, and application.

Evaluation of the Biocompatibility and Osteogenic Properties of Metal Oxide Coatings Applied by Magnetron Sputtering as Potential Biofunctional Surface Modifications for Orthopedic Implants

Biomaterials with adequate properties to direct a biological response are essential for orthopedic and dental implants. The surface properties are responsible for the biological response; thus, coatings with biologically relevant properties such as osteoinduction are exciting options to tailor the surface of different bulk materials. Metal oxide coatings such as TiO₂, ZrO₂, Nb₂O₅ and Ta₂O₅ have been suggested as promising for orthopedic and dental implants. However, a comparative study among them is still missing to select the most promising for bone-growth-related applications. In this work, using magnetron sputtering, TiO₂, ZrO₂, Ta₂O₅, and Nb₂O₅ thin films were deposited on Si (100) substrates. The coatings were characterized by Optical Profilometry, Scanning Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, X-ray Photoelectron Spectroscopy, X-ray Diffraction, Water Contact Angle measurements, and Surface Free Energy calculations. The cell adhesion, viability, proliferation, and differentiation toward the osteoblastic phenotype of mesenchymal stem cells plated on the coatings were measured to define the biological response. Results confirmed that all coatings were biocompatible. However, a more significant number of cells and proliferative cells were observed on Nb₂O₅ and Ta₂O₅ compared to TiO₂ and ZrO_2. Nevertheless, Nb₂O₅ and Ta₂O₅ seemed to induce cell differentiation toward the osteoblastic phenotype in a longer cell culture time than TiO₂ and ZrO₂.

A Decade of Progress on MAO-Treated Tantalum Surfaces: Advances and Contributions for Biomedical Applications

Micro-structured coatings with functional properties have been investigated due to a wide range of applications. It is known that micro-structures can play an important role in surface interactions determining the materials’ performance. Amongst the other materials, there has been an increasing interest in tantalum oxide (Ta₂O₅). This attention is mainly due to its variety of properties: biocompatibility and bioactivity; high dielectric constant; good thermal and chemical stability; excellent corrosion and mechanical resistance. Moreover, there is a wide range of applications in which the properties can be fitted. Furthermore, according to the final application, these properties can be enhanced or tailored through surface micro-structures manipulation. Due to this purpose, over the past decade, Ta surface modification by micro-arc oxidation (MAO) has been investigated mostly for biomedical applications. Therefore, this review focuses on Ta surface functionalization using the MAO technique. A clear understanding of the micro-discharge phenomena and the formation mechanism of a Ta₂O₅ anodic coating by MAO is supplied. The Ta₂O₅ coating morphology, topography, chemistry, and structure are explored, establishing their correlation with the MAO parameters. Additionally, an understanding of Ta₂O₅’s biological, mechanical, and electrochemical properties is provided and reviewed.

Comparison of surface properties, cell behaviors, bone regeneration and osseointegration between nano tantalum/PEEK composite and nano silicon nitride/PEEK composite

Both tantalum (Ta) and silicon nitride (SN) exhibit osteogenic bioactivity and antibacterial property. In addition, as a biomaterial for bone repair, polyetheretherketone (PEEK) has outstanding biocompatibility and mechanical performances while it is biologically inert. In this study, by blending PEEK with Ta and SN nanoparticles, respectively, Ta/PEEK composite (TPC) and SN/PEEK composite (SPC) were fabricated for load-bearing bone repair. The surface roughness, hydrophilicity and surface energy of TPC containing Ta nanoparticles were higher than SPC containing SN nanoparticles and PEEK. In addition, TPC with Ta nanoparticles exhibited low antibacterial property while SPC with SN nanoparticles showed high bacterial property. Moreover, the MC3T3-E1 cells responses (e.g. proliferation and differentiation) to TPC was the highest while PEEK was the lowest in vitro. Furthermore, new bone formation and osseointegration for TPC was the highest while PEEK was the lowest in vivo. In conclusion, compared with PEEK, addition of Ta and SN nanoparticles into PEEK fabricated bioactive composites of TPC and SPC with optimized surface property, which played crucial roles in inducing cellular response/bone regeneration. Although the osteogenic activity of SPC was lower than TPC, SPC exhibited osteogenic activity and good antibacterial property, which could prevent infection from bacterial. Therefore, SPC would have better potential for bone substitute.