Antibacterial polyvinyl alcohol/bacterial cellulose/nano-silver hydrogels that effectively promote wound healing

In situ synthesis of silver nanoparticles on silk: producing antibacterial fabrics

Herein, we explored an effective method for preparing silver nanoparticles (Ag NPs)-coated antibacterial silk fabrics. In particular, using amino acids and cellulose from silk as reducing agents and silver nitrate as a precursor, Ag NPs were synthesised in situ on the surface of silk without requiring additional reducing agents and catalysts. The surface morphology and chemical composition of the involved samples were characterised using techniques such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Notably, silk and silk precursors (silkworm cocoons, silk fibers and sericin) could be used for in situ Ag NPs synthesis. Furthermore, the antibacterial properties of the samples were evaluated against Escherichia coli-a Gram-negative bacterium-as a model, demonstrating an impressive antibacterial rate of up to 99.91%. In addition, we investigated the water absorption behaviour of the samples at 25 °C by assessing their moisture regain, water retention value and vertical wick height. The results indicated that the Ag NPs coating did not damage the water absorption performance of the involved silk. Finally, we compared the fabric performance before and after treatment using a universal testing machine and colorimeter. The results showed that the mechanical properties of the fabrics with the Ag NPs coating did not substantially change with treatment, but the fabrics became more yellowish. Overall, this research has notable application potential in the field of antibacterial fabrics.

Carboxyethyl chitosan/oxidized sodium alginate composite hydrogel loaded with AgNPs and Zn2+: dye adsorption and antibacterial function

This research investigates the crosslinking of carboxyethyl chitosan (CEC) with oxidized sodium alginate (OSA), subsequently facilitating the rapid reduction of silver ions to form silver nanoparticles (AgNPs) through a silver mirror reaction, employing varying concentrations of silver ammonia solution. The resulting hydrogels were then immersed in zinc chloride solutions at different concentrations to further improve their properties. Structural analysis revealed the formation of stable imine bonds between the amino and aldehyde groups, alongside the coordination of the carboxyl group with zinc ions. Scanning electron microscopy, texture profile analysis, and rheological tests revealed that the introduction of AgNPs contributed to a denser hydrogel network and increased hardness. Moreover, the incorporation of zinc ions significantly enhanced the mechanical properties, resulting in a 7.44-fold increase in the hydrogel's hardness relative to its original form. The hydrogel's antibacterial performance was evaluated against Escherichia coli and Staphylococcus aureus, showing notable inhibitory effects. The inhibition zone diameters for both bacterial strains exhibited an approximate 2.5-fold increase, indicating enhanced antimicrobial activity. Additionally, the adsorption capacity of the CEC/OSA/Ag1/Zn3 hydrogels for dyes was examined, with methylene blue and Congo red uptakes recorded at 157.23 mg/g and 79.15 mg/g, respectively. This study offers a promising and sustainable approach to tackle the challenges of dye wastewater treatment.

Physicochemical properties of bacterial cellulose/phototherapeutic polypyrrole/antibacterial chitosan composite membranes and their evaluation as chronic wound dressings

Bacterial cellulose (BC) is a natural fiber membrane and has been applied in many biomedical applications. Herein, it was used as the main scaffold to prepare wound dressings for treating diabetic skin wounds. Polypyrrole (PPy) was first synthesized by in situ oxidative polymerization within BC membrane and applied as a photothermal agent, followed by coating with chitosan (CS) to improve the biocompatibility and antibacterial properties. SEM pictures revealed sub-micron PPy particles ranging from 100 to 200 nm were formed and attached to the BC fibrils, whereas CS formed a thin, porous layer on the surface. FTIR analysis showed that there was hydrogen bonding between BC, PPy and CS components. The crystalline structure of BC was maintained yet with decreased crystallinity by addition of PPy and CS. The water absorption capability and water vapor transmission rate decreased by PPy incorporation owing to its hydrophobic nature, but they were regained by addition of hydrophilic CS. The prepared BC/PPy/CS membrane was biocompatible toward L929 cells and maintained hemocompatibility. Additionally, both PPy and CS contributed to the antibacterial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, while they demonstrated a potential for synergistic antibacterial effects when combined. Finally, the near-infrared (NIR)-driven photothermal-hyperthermic effects by PPy on lesions upregulated heat-shock protein (HSP) expression and anti-inflammatory properties by CS boosted restoration of diabetic wounds in vivo without the addition of any antibiotics or anti-inflammatory drugs. The results thus support using the BC/PPy/CS membrane for diabetic wound regeneration.

Advances in biomedical applications of bacterial cellulose: from synthesis mechanisms to commercial innovations

Bacterial cellulose (BC) has various unique properties, such as sustainability and biocompatibility, which make it a "rising star" in biomedical applications. This comprehensive review delves into the intricacies of BC production and elucidates the pivotal role of rosette terminal complexes in the synthesis of BC. Moreover, it explores the diverse range of in-situ and ex-situ modifications, such as coating, genetic modification, and esterification, that can enhance its performance in biomedical applications, notably in tissue engineering, drug delivery and wound healing applications Beginning with an in-depth examination of BC synthesis mechanisms, this review sheds light on the fundamental processes underlying its unique structure and properties and subsequently delves into the vast landscape of modification strategies, encompassing techniques such as chemical functionalization, surface patterning, and composite formation. Of particular significance are the insights provided into commercial products derived from BC, which offers a comprehensive overview of their features and applications, followed by several recent case studies. By consolidating knowledge from the basic principles of BC synthesis to cutting-edge advancements in the field, this review illuminates the transformative impact of BC on the landscape of health and medical breakthroughs, paving the way for future advancements in biomedicine.

Hydrogels and Nanogels: Pioneering the Future of Advanced Drug Delivery Systems

Conventional drug delivery approaches, including tablets and capsules, often suffer from reduced therapeutic effectiveness, largely attributed to inadequate bioavailability and difficulties in ensuring patient adherence. These challenges have driven the development of advanced drug delivery systems (DDS), with hydrogels and especially nanogels emerging as promising materials to overcome these limitations. Hydrogels, with their biocompatibility, high water content, and stimuli-responsive properties, provide controlled and targeted drug release. This review explores the evolution, properties, and classifications of hydrogels versus nanogels and their applications in drug delivery, detailing synthesis methods, including chemical crosslinking, physical self-assembly, and advanced techniques such as microfluidics and 3D printing. It also examines drug-loading mechanisms (e.g., physical encapsulation and electrostatic interactions) and release strategies (e.g., diffusion, stimuli-responsive, and enzyme-triggered). These gels demonstrate significant advantages in addressing the limitations of traditional DDS, offering improved drug stability, sustained release, and high specificity. Their adaptability extends to various routes of administration, including topical, oral, and injectable forms, while emerging nanogels further enhance therapeutic targeting through nanoscale precision and stimuli responsiveness. Although hydrogels and nanogels have transformative potential in personalized medicine, challenges remain in scalable manufacturing, regulatory approval, and targeted delivery. Future strategies include integrating biosensors for real-time monitoring, developing dual-stimuli-responsive systems, and optimizing surface functionalization for specificity. These advancements aim to establish hydrogels and nanogels as cornerstones of next-generation therapeutic solutions, revolutionizing drug delivery, and paving the way for innovative, patient-centered treatments.

Bacterial Cellulose-Based Superabsorbent Hydrogel for Wet Wound Dressing

Absorption of exudates is crucial for moist wound treatment, particularly in chronic wound care applications. However, controlling wound exudates with current gel-based wound dressings has challenges, such as the risk of bacterial infection during long-term transportation and use. In this study, a bacterial cellulose (BC)/polyvinyl alcohol (PVA) composite hydrogel (PBC) was prepared by a simple method using citric acid (CA) as the crosslinking agent. Fourier-transform infrared spectroscopy showed that the reaction between the carboxyl group of CA and the hydroxyl group of the BC-PVA hydrogel enhanced its hydrophilicity. Sol-gel analysis confirmed that an increase in the PVA content led to stronger crosslinking of the polymer network in the hydrogel. Wide-angle X-ray diffraction results showed that at low PVA concentrations, the tendency to connect with cellulose chains and crystallinity increased. In addition, the hydrogel dressing demonstrated excellent water absorption capacity; the swelling rate reached 3485.3% within one hour, and no cytotoxic effect was observed on the L929 fibroblast line in vitro. The designed hydrogel exhibited the ability to resist bacteria. Therefore, the new PBC biomaterial has certain potential for various applications, particularly as a highly absorbent dressing.

Characterization of nanosilver antibacterial bacterial cellulose composite membranes coated with montmorillonite and their potential application in food packaging

Bacterial cellulose (BC) is a natural, renewable polymer material with an ultrafine nanonetwork structure. However, BC has limited applications in food packaging and medical materials because of its lack of antibacterial properties. To expand the applications of BC, a new BC composite membrane was synthesized via an ex situ method. The BC membrane was first immersed in 100 mL of deionized water containing 3 mg of AgNO₃ for 24 h to incorporate silver nanoparticles (AgNPs). The BC-Ag composite was immersed in a 2 wt% montmorillonite (MMT) solution for 24 h to prepare the BC-Ag-MMT composite membrane. The structure and antibacterial properties of the composite were then examined. Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the successful synthesis of the BC-Ag-MMT composite membrane. The results revealed that the addition of AgNPs and MMT resulted in a significant decrease in porosity (13.23 ± 1.12 %), water vapor transmission rate (735.12 ± 12.55 g/(m2·day)), and oxygen permeability (2.28 ± 0.29 g/(s·m2Pa)) while increasing the membrane thickness (0.89 ± 0.08 mm). The incorporation of MMT into BC notably improved the thermal stability of the membrane and further influenced its porosity. The antibacterial activity was evaluated via the inhibition zone method. The BC-Ag-MMT composite membrane exhibited antibacterial activity against Salmonella paratyphi A, Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Salmonella enterica. These findings demonstrated that the BC-Ag-MMT composite membrane possesses exceptional physical and chemical properties, mechanical strength, and antibacterial efficacy. The composite membrane holds significant potential for applications in food packaging.

Hybrid Hydrogel Supplemented with Algal Polysaccharide for Potential Use in Biomedical Applications

Hydrogels are a viable option for biomedical applications due to their biocompatibility, biodegradability, and ability to incorporate various healing agents while maintaining their biological efficacy. This study focused on the preparation and characterization of novel hybrid hydrogels enriched with the natural algae compound Ulvan for potential use in wound dressings. The characterization of the hydrogel membranes involved multiple methods to assess their structural, mechanical, and chemical properties, such as pH measurements, swelling, moisture content and uptake, gel fraction, hydrolytic degradation, protein adsorption and denaturation tests, rheological measurements, SEM, biocompatibility testing, and scratch wound assay. The hydrogel obtained with a higher concentration of Ulvan (1 mg/mL) exhibited superior mechanical properties, a swelling index of 264%, a water content of 55%, and a lower degradation percentage. In terms of rheological properties, the inclusion of ULV in the hydrogel composition enhanced gel strength, and the Alginate + PVA + 1.0ULV sample demonstrated the greatest resistance to deformation. All hydrogels exhibited good biocompatibility, with cell viability above 70% and no obvious morphological modifications. The addition of Ulvan potentiates the regenerative effect of hydrogel membranes. Subsequent studies will focus on encapsulating bioactive compounds, investigating their release behavior, and evaluating their active biological effects.

Bacterial nanocelluloses as sustainable biomaterials for advanced wound healing and dressings

Wound healing remains a significant clinical challenge, calling for innovative approaches to expedite the recovery process and improve patient outcomes. Bacterial nanocelluloses (BNCs) have emerged as a promising solution in the field of wound healing and dressings due to their unique properties such as high crystallinity, mechanical strength, high purity, porosity, high water absorption capacity, biodegradability, biocompatibility, sustainability, and flexibility. BNC-based materials can be applied for the treatment of different types of wounds, from second-degree burns to skin tears, biopsy sites, and diabetic and ischemic wounds. BNC-based dressings have exceptional mechanical properties such as flexibility and strength, which ensure proper wound coverage and protection. The renewable nature, eco-friendly production process, longer lifespan, and potential for biodegradability of BNCs make them a more sustainable alternative to conventional wound care materials. This review aims to provide a detailed overview on the application of BNC-based composites for wound healing and dressings via highlighting their ability as a carrier for delivery of different types of antimicrobial compounds as well as their direct effect on the healing process. Besides, it mentions some of the in vivo and clinical studies using BNC-based dressings and describes challenges related to the application of these materials as well as their future directions.

Polysaccharides and Peptides With Wound Healing Activity From Bacteria and Fungi

Bacteria and fungi are natural sources of metabolites exhibiting diverse bioactive properties such as wound healing, antioxidative, antibacterial, antifungal, anti-inflammatory, antidiabetic, and anticancer activities. Two important groups of bacteria or fungi-derived metabolites with wound-healing potential are polysaccharides and peptides. In addition to bacteria-derived cellulose and hyaluronic acid and fungi-derived chitin and chitosan, these organisms also produce different polysaccharides (e.g., exopolysaccharides) with wound-healing potential. The most commonly used bacterial peptides in wound healing studies are bacteriocins and lipopeptides. Bacteria or fungi-derived polysaccharides and peptides exhibit both the in vitro and the in vivo wound healing potency. In the in vivo models, including animals and humans, these metabolites positively affect wound healing by inhibiting pathogens, exhibiting antioxidant activity, modulating inflammatory response, moisturizing the wound environment, promoting the proliferation and migration of fibroblasts and keratinocytes, increasing collagen synthesis, re-epithelialization, and angiogenesis. Therefore, peptides and polysaccharides derived from bacteria and fungi have medicinal importance. This study aims to overview current literature knowledge (especially within the past 5 years) on the in vitro and in vivo wound repair potentials of polysaccharides and peptides obtained from bacteria (Actinobacteria, Bacteroidetes, Cyanobacteria, Firmicutes, and Proteobacteria) and fungi (yeasts, filamentous microfungi, and mushrooms).

Preparation and characterization of Pistacia atlantica oleo-gum-resin-loaded electrospun nanofibers and evaluating its wound healing activity in two rat models of skin scar and burn wound

Background

A growing body of research is dedicated to developing new therapeutic agents for wound healing with fewer adverse effects. One of the proceedings being taken today in wound healing research is to identify promising biological materials that not only heal wounds but also vanish scarring. The effectiveness of nanofibers like polyvinyl alcohol (PVA), in improving wound healing can be related to their unique properties. Pistacia atlantica Desf. subsp. kurdica (Zohary) Rech. f. (PAK) [Anacardiaceae], also known as "Baneh" in traditional Iranian medicine, is one of the most effective herbal remedies for the treatment of different diseases like skin injuries due to its numerous pharmacological and biological properties, including anti-inflammatory, antioxidant, and anti-bacterial effects.

Purpose

Our study aimed to evaluate the wound-healing activity of nanofibers containing PVA/PAK oleo-gum-resin in two rat models of burn and excision wound repair.

Material and Methods

PVA/PKA nanofibers were prepared using the electrospinning method. Scanning electron microscope (SEM) images and mechanical properties of nanofibers were explored. Diffusion and releasing experiments of nanofibers were performed by the UV visible method at different time intervals and up to 72 h. The animal models were induced by excision and burn in Wistar rat's skin and the wound surface area was measured during the experiment for 10 and 21 days, respectively. On the last day, the wound tissue was removed for histological studies, and serum oxidative factors were measured to evaluate the antioxidant properties of the PVA/PKA. Data analysis was performed using ImageJ, Expert Design, and statistical analysis methods.

Results and discussion

PVA/PKA nanofibers were electrospun at different voltages (15, 18, and 20 kV). The most suitable fibers were obtained when the nozzle was positioned 15 cm away from the collector, with a working voltage of 15 kV, and an injection rate of 0.5 mm per hour, using the 30:70 w/v PKA gum. In the SEM images, it was found that the surface tension of the polymer solution decreased by adding the gum and yield thinner and longer fibers at a voltage of 15 kV with an average diameter of 96 ± 24 nm. The mechanical properties of PVA/PKA nanofibers showed that the presence of gum increased the tensile strength and decreased the tensile strength of the fibers simultaneously. In vivo results showed that PVA/PKA nanofibers led to a significant reduction in wound size and tissue damage (regeneration of the epidermal layer, higher density of dermal collagen fibers, and lower presence of inflammatory cells) compared to the positive (phenytoin and silver sulfadiazine) and negative control (untreated) groups. Wound contraction was higher in rats treated with PVA/PKA nanofibers. Additionally, antioxidative serum levels of catalase and glutathione were higher in the PVA/PKA nanofiber groups even in comparison to positive control groups.

Conclusion

Pistacia atlantica oleo-gum-resin-loaded electrospun nanofibers potentially improve excision and burn models of skin scars in rats through antioxidative and tissue regeneration mechanisms.

Multifunctional Ag-Poly(N-isopropylacrylamide/itaconic Acid) Hydrogel Nanocomposites Prepared by Gamma Irradiation for Potential Application as Topical Treatment Dressings

Today, hydrogel dressings that can protect injury sites and effectively promote healing have become highly desirable in wound management. Therefore, multifunctional silver-poli(N-isopropylacrylamide/itaconic acid) (Ag-P(NiPAAm/IA)) hydrogel nanocomposites were developed for potential application as topical treatment dressings. The radiolytic method, used for the crosslinking of the polymer matrix as well as for the in situ incorporation of silver nanoparticles (AgNPs) into the polymer matrix, enables the preparation of hydrogel nanocomposites without introducing harmful and toxic agents. Moreover, materials produced using γ-irradiation are simultaneously sterilized, thus fulfilling one of the basic requirements regarding their potential biomedical applications. The NiPAAm/IA ratio and the presence of AgNPs influenced the microstructural parameters of the investigated systems. Increasing the IA content leads to the formation of a more porous polymer matrix with larger pores, while the incorporated AgNPs act as additional junction points, decreasing the porosity and pore size of the resulting nanocomposite hydrogels. Swelling studies showed that most investigated systems uptake the fluids from their surroundings by non-Fick diffusion. Further, the Ag+ ion release, antibacterial activity, and cytotoxicity of Ag-P(NiPAAm/IA) hydrogel nanocomposites were examined to evaluate their biomedical potential. All hydrogel nanocomposites showed an initial burst release of Ag+ ions (useful in preventing bacteria adherence and biofilm formation), followed by a slower release of the same (ensuring sterility for longer use). An antibacterial activity test against Escherichia coli and Staphylococcus aureus showed that Ag-P(NiPAAm/IA) hydrogel nanocomposites, with silver concentrations around 10 ± 1 ppm, successfully prevent bacterial growth. Finally, it was shown that the investigated hydrogel nanocomposites do not exhibit a cytotoxic effect on human keratinocyte HaCaT cells. Therefore, these multifunctional hydrogel nanocomposites may promote wound repair and show promising potential for application as functional wound dressing.

Enhancing refrigerated chicken breasts preservation: Novel composite hydrogels incorporated with antimicrobial peptides, bacterial cellulose, and polyvinyl alcohol

Microbial contamination annually leads to substantial food resource loss. Effective food packaging can mitigate food contamination and waste, yet conventional materials such as plastics often lack bacteriostatic activity. This study aimed to synthesise FengycinA-M3@bacterial cellulose@polyvinyl alcohol composite hydrogels via dual cross-linking with hydrogen and borate bonding, with the goal of enhancing antibacterial properties and prolonging the preservation period of refrigerated chicken breast. The composite hydrogel was subjected to comprehensive characterisation for structural, mechanical, water absorption, slow peptide release, antimicrobial capacity, biocompatibility, and chicken breast freshness preservation. The results showed that the composite hydrogel had a porous network structure and excellent gel elasticity and biocompatibility. It was effective in inhibiting Staphylococcus aureus and Escherichia coli, and prolonged the storage time of frozen chicken breast for up to 12 days. These findings emphasise the potential of hydrogel food packaging to prolong storage periods and its suitability for food industry applications due to ease of manufacture.

Advances of biomacromolecule-based antibacterial hydrogels and their performance evaluation for wound healing: A review

Biomacromolecule hydrogels possess excellent mechanical properties and biocompatibility, but their inability to combat bacteria restricts their application in the biomedical field. With the increasing requirements and demands for hydrogel dressings, wound dressings with antibacterial properties of biomacromolecule hydrogels reinforced by adding antibacterial agents have attracted much attention, and related reviews are emerging. In this paper, the advances of biomacromolecule antibacterial hydrogels (including chitosan, sodium alginate, Hyaluronic acid, cellulose and gelatin) were first overviewed, and the antibacterial agents incorporated into hydrogels were classified (including metals and their derivatives, carbon-based materials, and native compounds). A series of performance evaluations of antibacterial hydrogels in the process of promoting wound healing were then reviewed, including basic properties (mechanical, rheological, injectable and self-healing, etc.), in vitro experiments (hemostasis, antibacterial, anti-inflammatory, anti-oxidation, biocompatibility) and in vivo experiments (in vivo model, histomorphology analysis, cytokines). Finally, the future development of biomacromolecule-based antibacterial hydrogels for wound healing is prospected. This work can provide a useful reference for researchers to prepare practical new wound hydrogel dressings.

Development of Polyvinyl Alcohol Hydrogels for Controlled Glucose Release in Biomedical Applications

Polyvinyl alcohol (PVA) hydrogels have a wide range of applications in the pharmaceutical and biomedicine fields due to their exceptional biophysical properties. The study focuses on preparing and characterizing capsule-shaped PVA hydrogels to enhance their biocompatibility and porosity for controlled glucose release and cell proliferation. The hydrogels were prepared using different concentrations (Cs) and molecular weights (MWs) of PVA, with two different lengths, A (10 mm) and B (20 mm), to control glucose release over 60 min. The preparation process involved PVA gel preparation and PVA hydrogel formation. A total of 500 µL of glucose was injected into all dehydrated hydrogels in groups A and B. Glucose release was studied by immersing the hydrogels in saline at 37 °C with stirring at 500 rpm. The SUP-B15 cell line was grown in six A1 hydrogels for biocompatibility testing. The results indicate that all hydrogels remained stable at 37 °C without degrading. Those with a higher C and MW exhibited a denser and less porous structure, lower glucose storage capacity, and higher elongation at break. Significant differences in glucose release, diffusion speed, and flux were observed, which were more evident in A1 > A4, B1 > B4, and B1 > A1 over 60 min. A1 and B1 had higher values because their higher porosity distribution allowed glucose to diffuse more easily. B1, being larger, has more glucose due to its increased length. The cell growth response and viability at 48 h in contact with the hydrogels was similar to that of the control (4.5 × 105 cells/mL, 98.5% vs. 4.8 × 105 cells/mL, 99.7% viability), thus demonstrating biocompatibility. The hydrogels effectively released glucose over 60 min, with variations based on porosity, C, MW, and length, and demonstrated good biocompatibility with the cell line.

Composite antibacterial hydrogels based on two natural products pullulan and ε-poly-l-lysine for burn wound healing

Antibacterial hydrogels as burn wound dressings are capable of efficaciously defending against bacterial infection and accelerating burn wound healing. Thus far, a large plethora of antibacterial hydrogels have adopted numerous components and intricate preparation processes, yet restricting their practical industrialization applications. Simple and effective preparation methods of antibacterial hydrogels are hence urgently needed. Herein, an easy but efficacious strategy with the employment of two natural products pullulan and ε-poly-l-lysine (ε-PL) was designed to fabricate composite antibacterial hydrogels for burn wound healing for the first time. The hydrogel crosslinking networks were formed through amidation reactions between carboxylated pullulan derivative (CP) and ε-poly-l-lysine hydrochloride (ε-PL·HCl). The resulting hydrogels possessed high transparency, porous structures, tunable gelation time and gel content, relatively low swelling ratios, appropriate self-degradability, proper mechanical properties, strong in vitro bacteriostatic activities, non-cytotoxicity, capacities of facilitating cell migration and excellent hemocompatibility. In the infected burn model of mice, the hydrogels were observed to display prominent in vivo antibacterial activities and enable the acceleration of burn wound healing. We opine the simply and effectively prepared antibacterial hydrogels as promising dressings for burn wound recovery have broad industrialization prospects.

Silver/tannic acid nanoparticles/ poly-L-lysine decorated polyvinyl alcohol-hydrogel as a hybrid wound dressing

Hydrogels containing antimicrobial materials have emerged as attractive platforms for wound treatment in the past decade due to their favorable bio-mimicking properties, excellent modulation of bacterial infection, and ability to minimize bacterial resistance. Herein, a hybrid combination of polyvinyl alcohol (PVA), hyperbranched poly L-lysine (L), tannic acid decorated AgNPs (AgTA NPs), loaded with Allantoin (Alla) is used to fabricate PLAg-Alla hydrogel dressing via the freeze-thaw method without use of any chemical cross-linker. The PLAg-Alla hydrogel possesses a great structure, is biodegradable, and safe, and exhibits high antibacterial potential, all required for efficient wound healing. The incorporation of AgTA and poly L-lysine (L) within the hydrogel contributes to the enhancement of antibacterial ability, as well as effectively promoting the wound healing. This hybrid hydrogel possessed favorable physicochemical features, robust antibacterial properties, and accelerated wound healing in vivo as promising dressing for the clinical application.

A bacterial cellulose/polyvinyl alcohol/nitro graphene oxide double layer network hydrogel efficiency antibacterial and promotes wound healing

In this study, graphene oxide (GO) was chemically modified utilizing concentrated nitric acid to produce a nitrated graphene oxide derivative (NGO) with enhanced oxidation level, improved dispersibility, and increased antibacterial activity. A double-layer composite hydrogel material (BC/PVA/NGO) with a core-shell structure was fabricated by utilizing bacterial cellulose (BC) and polyvinyl alcohol (PVA) binary composite hydrogel scaffold as the inner network template, and hydrophilic polymer (PVA) loaded with antibacterial material (NGO) as the outer network. The fabrication process involved physical crosslinking based on repeated freezing and thawing. The resulting BC/PVA/NGO hydrogel exhibited a porous structure, favorable mechanical properties, antibacterial efficacy, and biocompatibility. Subsequently, the performance of BC/PVA/NGO hydrogel in promoting wound healing was evaluated using a mouse skin injury model. The findings demonstrated that the BC/PVA/NGO hydrogel treatment group facilitated improved wound healing in the mouse skin injury model compared to the control group and the BC/PVA group. This enhanced wound healing capability was attributed primarily to the excellent antibacterial and tissue repair properties of the BC/PVA/NGO hydrogel.

Bifunctional lignocellulose nanofiber hydrogel possessing intriguing pH-responsiveness and self-healing capability towards wound healing applications

Lignocellulose nanofibers (LCNF) obtained from agricultural waste are potential candidates for enhancing composite materials because of their excellent mechanical properties, abundant groups and high biocompatibility. However, the application of LCNF has received limited attention to date from researchers in the healthcare field. Herein, based on the bifunctional group (carboxyl and aldehyde groups) modified LCNF (DCLCNF) and chitosan (CS), we developed a multifunctional bio-based hydrogel (CS-DCLCNF). The addition of lignin-containing DCLCNF strengthened the internal crosslinking and the intermolecular interaction of hydrogels, and the presence of lignin and carboxyl groups increased the mechanical strength of the hydrogel and the adsorption of aromatic drugs. Results revealed that the hydrogels exhibited self-healing, injectable, and high swelling rates. The hydrogels had favorable mechanical strength (G'max of ~16.60 kPa), and the maximum compressive stress was 24 kPa. Moreover, the entire tetracycline hydrochloride (TH) release process was slow and pH-responsive, because of the rich noncovalent and π-π interactions between DCLCNF and TH. The hydrogels also exhibited excellent biocompatibility and antibacterial properties. Notably, the wound healing experiment showed that the hydrogels were beneficial in accelerating wounds healing, which could heal completely in 13 days. Therefore, CS-DCLCNF hydrogels may have promising applications in drug delivery for wound healing.

Bilirubin/morin self-assembled nanoparticle-engulfed collagen/polyvinyl alcohol hydrogel accelerates chronic diabetic wound healing by modulating inflammation and ameliorating oxidative stress

Chronic diabetic wounds pose a serious threat to human health and safety because of their refractory nature and high recurrence rates. The formation of refractory wounds is associated with wound microenvironmental factors such as increased expression of proinflammatory factors and oxidative stress. Bilirubin is a potent endogenous antioxidant, and morin is a naturally active substance that possesses anti-inflammatory and antioxidant effects. Both hold the potential for diabetic wound treatment by intervening in pathological processes. In this study, we developed bilirubin/morin-based carrier-free nanoparticles (BMn) to treat chronic diabetic wounds. In vitro studies showed that BMn could effectively scavenge overproduced reactive oxygen species and suppress elevated inflammation, thereby exerting a protective effect. BMn was then loaded into a collagen/polyvinyl alcohol gel (BMn@G) for an in vivo study to maintain a moist environment for the skin and convenient biomedical applications. BMn@G exhibits excellent mechanical properties, water retention capabilities, and in vivo safety. In type I diabetic mice, BMn@G elevated the expression of the anti-inflammatory factor IL-10 and concurrently diminished the expression of the proinflammatory factor TNF-α in the tissues surrounding the wounds. Furthermore, BMn@G efficiently mediated macrophage polarization from the M1-type to the M2-type, thereby fostering anti-inflammatory effects. Additionally, BMn@G facilitated the conversion of type III collagen fiber bundles to type I collagen fiber bundles, resulting in a more mature collagen fiber structure. This study provides a promising therapeutic alternative for diabetic wound healing.

Biodegradable Polymers in Veterinary Medicine-A Review

During the past two decades, tremendous progress has been made in the development of biodegradable polymeric materials for various industrial applications, including human and veterinary medicine. They are promising alternatives to commonly used non-degradable polymers to combat the global plastic waste crisis. Among biodegradable polymers used, or potentially applicable to, veterinary medicine are natural polysaccharides, such as chitin, chitosan, and cellulose as well as various polyesters, including poly(ε-caprolactone), polylactic acid, poly(lactic-co-glycolic acid), and polyhydroxyalkanoates produced by bacteria. They can be used as implants, drug carriers, or biomaterials in tissue engineering and wound management. Their use in veterinary practice depends on their biocompatibility, inertness to living tissue, mechanical resistance, and sorption characteristics. They must be designed specifically to fit their purpose, whether it be: (1) facilitating new tissue growth and allowing for controlled interactions with living cells or cell-growth factors, (2) having mechanical properties that address functionality when applied as implants, or (3) having controlled degradability to deliver drugs to their targeted location when applied as drug-delivery vehicles. This paper aims to present recent developments in the research on biodegradable polymers in veterinary medicine and highlight the challenges and future perspectives in this area.

Construction methods and biomedical applications of PVA-based hydrogels

Polyvinyl alcohol (PVA) hydrogel is favored by researchers due to its good biocompatibility, high mechanical strength, low friction coefficient, and suitable water content. The widely distributed hydroxyl side chains on the PVA molecule allow the hydrogels to be branched with various functional groups. By improving the synthesis method and changing the hydrogel structure, PVA-based hydrogels can obtain excellent cytocompatibility, flexibility, electrical conductivity, viscoelasticity, and antimicrobial properties, representing a good candidate for articular cartilage restoration, electronic skin, wound dressing, and other fields. This review introduces various preparation methods of PVA-based hydrogels and their wide applications in the biomedical field.

The evaluation of four nano-formulations loaded-Elsinochrome A on characteristics and in vitro cytotoxicity effect

Elsinochrome A (EA) is a naturally occurring photosensitizer with potential applications in photodynamic therapy (PDT) for various malignancies. Despite its promising therapeutic properties, the poor solubility of EA hampers its effective utilization in clinical settings. To circumvent this limitation, we engineered four distinct nano-formulations: PLGA/EA nanoparticles (NPs), CMC-PLGA/EA NPs, mPEG-PCL/EA nanomicelles (NMs), and LHP-CHOL/EA nanoliposomes (NLs), all designed to enhance the solubility of EA. A comparative evaluation of these formulations, based on metrics such as particle size, Zeta potential, drug loading efficiency, and encapsulation efficiency, identified PLGA/EA NPs and mPEG-PCL/EA NMs as the most efficacious candidates. Subsequent in vitro investigations into the drug release kinetics under varying pH conditions and the impact on cell viability and apoptosis in A549 and MCF-7 cell lines were conducted. Remarkably, the maximum drug release for PLGA/EA NPs and mPEG-PCL/EA NMs was recorded at 62.5% and 70.8% in an acidic environment (pH 5.7), respectively. Upon exposure to 460 nm light, PLGA/EA NPs induced a significant reduction in A549 cell viability to 13.8% and an apoptosis rate of 93.8%, whereas mPEG-PCL/EA NMs elicited a decrease in MCF-7 cell viability to 12.8% and an apoptosis rate of 73.0%.

Biogenic Vaterite Calcium Carbonate-Silver/Poly(Vinyl Alcohol) Film for Wound Dressing

Vaterite, a spherical polymorph of CaCO3, shows potential as a carrier for the stable and controlled release of silver nanoparticles (AgNPs), preventing their aggregation or loss of efficacy during application. Furthermore, the embedding of CaCO3-Ag in a poly(vinyl alcohol) (PVA) matrix helps effectively encapsulate and protect the CaCO3-Ag microspheres and provides mechanical stability for better contact with the wound surface. This article focuses on the fabrication of an antimicrobial and biocompatible absorbent film embedded with precipitated biogenic vaterite CaCO3-Ag microspheres. The impact of vaterite CaCO3-Ag on the physical, chemical, nanomechanical, biocompatibility, and antimicrobial properties of the PVA films was investigated. The morphology study revealed a bilayer film structure with an inactive and active surface containing homogeneously distributed vaterite CaCO3-Ag. The X-ray photoelectron spectroscopy (XPS) analysis of the spin-orbit splitting in the Ag 3d5/2 and Ag 3d3/2 peaks indicated the presence of both metallic and ionic states of silver in vaterite CaCO3-Ag prior to its incorporation into the PVA polymer matrix. However, upon embedding in the PVA matrix, a subsequent transformation to solely ionic states was observed. The nanomechanical properties of PVA improved, and the reduced modulus and hardness increased to 14.62 ± 5.23 and 0.64 ± 0.29 GPa, respectively. The films demonstrate a significant activity toward Gram-negative Escherichia coli bacteria. The release of AgNPs was studied in both open and closed systems at pH 6, mimicking the pH environment of the wound, and it demonstrated a dependency on the type of capping agent used for synthesis and loading of AgNPs. The results further revealed the biocompatibility of the prepared films with human dermal fibroblast cells at a concentration of ≤5 mg/mL, making them applicable and functional for wound dressing applications.

Multifunctional and theranostic hydrogels for wound healing acceleration: An emphasis on diabetic-related chronic wounds

Hydrogels represent intricate three-dimensional polymeric structures, renowned for their compatibility with living systems and their ability to naturally degrade. These networks stand as promising and viable foundations for a range of biomedical uses. The practical feasibility of employing hydrogels in clinical trials has been well-demonstrated. Among the prevalent biomedical uses of hydrogels, a significant application arises in the context of wound healing. This intricate progression involves distinct phases of inflammation, proliferation, and remodeling, often triggered by trauma, skin injuries, and various diseases. Metabolic conditions like diabetes have the potential to give rise to persistent wounds, leading to delayed healing processes. This current review consolidates a collection of experiments focused on the utilization of hydrogels to expedite the recovery of wounds. Hydrogels have the capacity to improve the inflammatory conditions at the wound site, and they achieve this by diminishing levels of reactive oxygen species (ROS), thereby exhibiting antioxidant effects. Hydrogels have the potential to enhance the growth of fibroblasts and keratinocytes at the wound site. They also possess the capability to inhibit both Gram-positive and Gram-negative bacteria, effectively managing wounds infected by drug-resistant bacteria. Hydrogels can trigger angiogenesis and neovascularization processes, while also promoting the M2 polarization of macrophages, which in turn mitigates inflammation at the wound site. Intelligent and versatile hydrogels, encompassing features such as pH sensitivity, reactivity to reactive oxygen species (ROS), and responsiveness to light and temperature, have proven advantageous in expediting wound healing. Furthermore, hydrogels synthesized using environmentally friendly methods, characterized by high levels of biocompatibility and biodegradability, hold the potential for enhancing the wound healing process. Hydrogels can facilitate the controlled discharge of bioactive substances. More recently, there has been progress in the creation of conductive hydrogels, which, when subjected to electrical stimulation, contribute to the enhancement of wound healing. Diabetes mellitus, a metabolic disorder, leads to a slowdown in the wound healing process, often resulting in the formation of persistent wounds. Hydrogels have the capability to expedite the healing of diabetic wounds, facilitating the transition from the inflammatory phase to the proliferative stage. The current review sheds light on the biological functionalities of hydrogels, encompassing their role in modulating diverse mechanisms and cell types, including inflammation, oxidative stress, macrophages, and bacteriology. Additionally, this review emphasizes the significance of smart hydrogels with responsiveness to external stimuli, as well as conductive hydrogels for promoting wound healing. Lastly, the discussion delves into the advancement of environmentally friendly hydrogels with high biocompatibility, aimed at accelerating the wound healing process.

Formulation and Comprehensive Evaluation of Biohybrid Hydrogel Membranes Containing Doxycycline or Silver Nanoparticles

Complicated wounds often require specialized medical treatments, and hydrogels have emerged as a popular choice for wound dressings in such cases due to their unique properties and the ability to incorporate and release therapeutic agents. Our focus was to develop and characterize a new optimized formula for biohybrid hydrogel membranes, which combine natural and synthetic polymers, bioactive natural compounds, like collagen and hyaluronic acid, and pharmacologically active substances (doxycycline or npAg). Dynamic (oscillatory) rheometry confirmed the strong gel-like properties of the obtained hydrogel membranes. Samples containing low-dose DOXY showed a swelling index of 285.68 ± 6.99%, a degradation rate of 71.6 ± 0.91% at 20 h, and achieved a cumulative drug release of approximately 90% at pH 7.4 and 80% at pH 8.3 within 12 h. The addition of npAg influenced the physical properties of the hydrogel membranes. Furthermore, the samples containing DOXY demonstrated exceptional antimicrobial efficacy against seven selected bacterial strains commonly associated with wound infections and complications. Biocompatibility assessments revealed that the samples exhibited over 80% cell viability. However, the addition of smaller-sized nanoparticles led to decreased cellular viability. The obtained biohybrid hydrogel membranes show favorable properties that render them suitable for application as wound dressings.

Nanosilver-Functionalized Hybrid Hydrogels of Carboxymethyl Cellulose/Poly(Vinyl Alcohol) with Antibacterial Activity for Prevention and Therapy of Infections of Diabetic Chronic Wounds

Diabetic foot ulcers (DFUs) are considered one of the most severe chronic complications of diabetes and can lead to amputation in severe cases. In addition, bacterial infections in diabetic chronic wounds aggravate this scenario by threatening human health. Wound dressings made of polymer matrices with embedded metal nanoparticles can inhibit microorganism growth and promote wound healing, although the current clinical treatments for diabetic chronic wounds remain unsatisfactory. In this view, this research reports the synthesis and characterization of innovative hybrid hydrogels made of carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) chemically crosslinked by citric acid (CA) functionalized with silver nanoparticles (AgNPs) generated in situ using an eco-friendly aqueous process. The results assessed through comprehensive in vitro and in vivo assays demonstrated that these hybrid polymer hydrogels functionalized with AgNPs possess physicochemical properties, cytocompatibility, hemocompatibility, bioadhesion, antibacterial activity, and biocompatibility suitable for wound dressings to support chronic wound healing process as well as preventing and treating bacterial infections. Hence, it can be envisioned that, with further research and development, these polymer-based hybrid nanoplatforms hold great potential as an important tool for creating a new generation of smart dressings for treating chronic diabetic wounds and opportunistic bacterial infections.

Injectable and photothermal antibacterial bacterial cellulose cryogel for rapid hemostasis and repair of irregular and deep skin wounds

For irregular and deep skin wounds, it's difficult for wound dressing to reach the injured site to achieve rapid hemostasis and provide wound protection. Bacterial cellulose (BC) has high strength and natural three-dimensional pore structure, which endows it shape recovery ability after absorbing blood when injected to the wound. Therefore, in the study, an injectable aldehyde bacterial cellulose/polydopamine (DBC/PDA) photothermal cryogel was prepared by oxidation polymerization method for hemostasis and repair of irregular and deep skin wounds. BC was oxidized by NaIO4 to form DBC and dopamine (DA) was introduced into DBC by reacting with the aldehyde group in DBC through Schiff base reaction. Under oxidation effect of NaIO4 and with freezing condition, water crystallization led to local aggregation of DA and DBC, and at the same time DA was oxidized to PDA and polymerized with DA on DBC. After the melting process, the porous cryogel was obtained. The introduction of PDA enhances the photothermal properties of DBC/PDA cryogel. DBC/PDA cryogel can kill most bacteria and provide wound protection under near-infrared light. In vitro and in vivo hemostatic tests show that the DBC/PDA cryogel can quickly absorb blood and stop bleeding. Combined with its good injectable, DBC/PDA cryogel can provide rapid hemostatic and protection in the face of irregular and deep skin wounds.

Cellulose-Based Metallogels-Part 3: Multifunctional Materials

The incorporation of the metal phase into cellulose hydrogels, resulting in the formation of metallogels, greatly expands their application potential by introducing new functionalities and improving their performance in various fields. The unique antiviral, antibacterial, antifungal, and anticancer properties of metal and metal oxide nanoparticles (Ag, Au, Cu, CuxOy, ZnO, Al2O3, TiO2, etc.), coupled with the biocompatibility of cellulose, allow the development of composite hydrogels with multifunctional therapeutic potential. These materials can serve as efficient carriers for controlled drug delivery, targeting specific cells or pathogens, as well as for the design of artificial tissues or wound and burn dressings. Cellulose-based metallogels can be used in the food packaging industry to provide biodegradable and biocidal materials to extend the shelf life of the goods. Metal and bimetallic nanoparticles (Au, Cu, Ni, AuAg, and AuPt) can catalyze chemical reactions, enabling composite cellulose hydrogels to be used as efficient catalysts in organic synthesis. In addition, metal-loaded hydrogels (with ZnO, TiO2, Ag, and Fe3O4 nanoparticles) can exhibit enhanced adsorption capacities for pollutants, such as dyes, heavy metal ions, and pharmaceuticals, making them valuable materials for water purification and environmental remediation. Magnetic properties imparted to metallogels by iron oxides (Fe2O3 and Fe3O4) simplify the wastewater treatment process, making it more cost-effective and environmentally friendly. The conductivity of metallogels due to Ag, TiO2, ZnO, and Al2O3 is useful for the design of various sensors. The integration of metal nanoparticles also allows the development of responsive materials, where changes in metal properties can be exploited for stimuli-responsive applications, such as controlled release systems. Overall, the introduction of metal phases augments the functionality of cellulose hydrogels, expanding their versatility for diverse applications across a broad spectrum of industries not envisaged during the initial research stages.

Nanotechnology-based techniques for hair follicle regeneration

The hair follicle (HF) is a multicellular complex structure of the skin that contains a reservoir of multipotent stem cells. Traditional hair repair methods such as drug therapies, hair transplantation, and stem cell therapy have limitations. Advances in nanotechnology offer new approaches for HF regeneration, including controlled drug release and HF-specific targeting. Until recently, embryogenesis was thought to be the only mechanism for forming hair follicles. However, in recent years, the phenomenon of wound-induced hair neogenesis (WIHN) or de novo HF regeneration has gained attention as it can occur under certain conditions in wound beds. This review covers HF-specific targeting strategies, with particular emphasis on currently used nanotechnology-based strategies for both hair loss-related diseases and HF regeneration. HF regeneration is discussed in several modalities: modulation of the hair cycle, stimulation of progenitor cells and signaling pathways, tissue engineering, WIHN, and gene therapy. The HF has been identified as an ideal target for nanotechnology-based strategies for hair regeneration. However, some regulatory challenges may delay the development of HF regeneration nanotechnology based-strategies, which will be lastly discussed.

Nano Ag/PPy Biocomposites Based on Graphene Oxide Modified Bacterial Cellulose from the Juice of Xinhui Citrus and Its Antibacterial Activity

Bacterial cellulose (BC) is a green, natural biopolymer with excellent biocompatibility and a film-forming ability. However, its lack of inherent antibacterial activity restricts its application in medical materials and food preservation. In this study, BC derived from the juice of discarded Xinhui citrus was obtained through fermentation and further modified in situ with graphene oxide (GO) to obtain BC(GO). Subsequently, BC(GO) was loaded with cell-compatible polypyrrole (PPy) and antibacterial agent silver nanoparticles (AgNPs) to prepare Ag-PPy/BC(GO) composite films. Composite films were characterized using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS) to evaluate their chemical structure and morphology. The results demonstrate effective adsorption of PPy and AgNPs onto the surface of BC nanofibers modified with GO. Antibacterial experiments reveal synergistic antibacterial effects of PPy and AgNPs. The Ag-PPy/BC(GO) membranes exhibit strong antibacterial activity against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with 48-h growth inhibition rates of 75-84% and 82-84%, respectively.

Recent advances in bacterial cellulose-based antibacterial composites for infected wound therapy

Wound infection arising from pathogenic bacteria brought serious trouble to the patient and medical system. Among various wound dressings that are effective in killing pathogenic bacteria, antimicrobial composites based on bacterial cellulose (BC) are becoming the most popular materials due to their success in eliminating pathogenic bacteria, preventing wound infection, and promoting wound healing. However, as an extracellular natural polymer, BC is not inherently antimicrobial, which means that it must be combined with other antimicrobials to be effective against pathogens. BC has many advantages over other polymers, including nano-structure, significant moisture retention, non-adhesion to the wound surface, which has made it superior to other biopolymers. This review introduces the recent advances in BC-based composites for the treatment of wound infection, including the classification and preparation methods of composites, the mechanism of wound treatment, and commercial application. Moreover, their wound therapy applications include hydrogel dressing, surgical sutures, wound healing bandages, and patches are summarized in detail. Finally, the challenges and future prospects of BC-based antibacterial composites for the treatment of infected wounds are discussed.

Electrospun Nanofiber Membranes with Various Structures for Wound Dressing

Electrospun nanofiber membranes (NFMs) have high porosity and a large specific surface area, which provide a suitable environment for the complex and dynamic wound healing process and a large number of sites for carrying wound healing factors. Further, the design of the nanofiber structure can imitate the structure of the human dermis, similar to the natural extracellular matrix, which better promotes the hemostasis, anti-inflammatory and healing of wounds. Therefore, it has been widely studied in the field of wound dressing. This review article overviews the development of electrospinning technology and the application of electrospun nanofibers in wound dressings. It begins with an introduction to the history, working principles, and transformation of electrospinning, with a focus on the selection of electrospun nanofiber materials, incorporation of functional therapeutic factors, and structural design of nanofibers and nanofiber membranes. Moreover, the wide application of electrospun NFMs containing therapeutic factors in wound healing is classified based on their special functions, such as hemostasis, antibacterial and cell proliferation promotion. This article also highlights the structural design of electrospun nanofibers in wound dressing, including porous structures, bead structures, core-shell structures, ordered structures, and multilayer nanofiber membrane structures. Finally, their advantages and limitations are discussed, and the challenges faced in their application for wound dressings are analyzed to promote further research in this field.

Animal tissue-derived biomaterials for promoting wound healing

The skin serves as the primary barrier between the human body and external environment, and is therefore susceptible to damage from various factors. In response to this challenge, animal tissue-derived biomaterials have emerged as promising candidates for wound healing due to their abundant sources, low side-effect profiles, exceptional bioactivity, biocompatibility, and unique extracellular matrix (ECM) mimicry. The evolution of modern engineering technology and therapies has allowed these animal tissue-derived biomaterials to be transformed into various forms and modified to possess the necessary properties for wound repair. This review provides an overview of the wound healing process and the factors that influence it. We then describe the extraction methods, important properties, and recent practical applications of various animal tissue-derived biomaterials. Our focus then shifts to the critical properties of these biomaterials in skin wound healing and their latest research developments. Finally, we critically examine the limitations and future prospects of biomaterials generated from animal tissues in this field.

Cellulose-Based Metallogels-Part 2: Physico-Chemical Properties and Biological Stability

Metallogels represent a class of composite materials in which a metal can be a part of the gel network as a coordinated ion, act as a cross-linker, or be incorporated as metal nanoparticles in the gel matrix. Cellulose is a natural polymer that has a set of beneficial ecological, economic, and other properties that make it sustainable: wide availability, renewability of raw materials, low-cost, biocompatibility, and biodegradability. That is why metallogels based on cellulose hydrogels and additionally enriched with new properties delivered by metals offer exciting opportunities for advanced biomaterials. Cellulosic metallogels can be either transparent or opaque, which is determined by the nature of the raw materials for the hydrogel and the metal content in the metallogel. They also exhibit a variety of colors depending on the type of metal or its compounds. Due to the introduction of metals, the mechanical strength, thermal stability, and swelling ability of cellulosic materials are improved; however, in certain conditions, metal nanoparticles can deteriorate these characteristics. The embedding of metal into the hydrogel generally does not alter the supramolecular structure of the cellulose matrix, but the crystallinity index changes after decoration with metal particles. Metallogels containing silver (0), gold (0), and Zn(II) reveal antimicrobial and antiviral properties; in some cases, promotion of cell activity and proliferation are reported. The pore system of cellulose-based metallogels allows for a prolonged biocidal effect. Thus, the incorporation of metals into cellulose-based gels introduces unique properties and functionalities of this material.

Antibacterial actions of Ag nanoparticles synthesized from Cimicifuga dahurica (Turcz.) Maxim. and their application in constructing a hydrogel spray for healing skin wounds

Cimicifuga dahurica (Turcz.) Maxim. is an edible natural food and a type of traditional herbal medicine with antipyretic and analgesic properties. In this study, we found that Cimicifuga dahurica (Turcz.) Maxim. extract (CME) has good skin wound healing qualities due to its antibacterial effects on both wound inflammation-related Gram positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram negative (Escherichia coli and Klebsiella pneumoniae) strains. Using CME as a reducing agent, CME-based Ag nanoparticles (CME-AgNPs) with an average particle size of 7 nm were synthesized. The minimum bactericidal concentration (MBC) of CME-AgNPs against the investigated bacterial species varied from 0.08 to 1.25 mg/mL, indicating much higher antibacterial activity than the pure CME. Additionally, a novel network-like thermosensitive hydrogel spray (CME-AgNPs-F127/F68) was developed and shown a skin wound healing rate of 98.40% in 14 days, demonstrating the spray's potential as a novel wound dressing that accelerates wound healing.

A Review of Metal Nanoparticles Embedded in Hydrogel Scaffolds for Wound Healing In Vivo

An evolving field, nanotechnology has made its mark in the fields of nanoscience, nanoparticles, nanomaterials, and nanomedicine. Specifically, metal nanoparticles have garnered attention for their diverse use and applicability to dressings for wound healing due to their antimicrobial properties. Given their convenient integration into wound dressings, there has been increasing focus dedicated to investigating the physical, mechanical, and biological characteristics of these nanoparticles as well as their incorporation into biocomposite materials, such as hydrogel scaffolds for use in lieu of antibiotics as well as to accelerate and ameliorate healing. Though rigorously tested and applied in both medical and non-medical applications, further investigations have not been carried out to bring metal nanoparticle-hydrogel composites into clinical practice. In this review, we provide an up-to-date, comprehensive review of advancements in the field, with emphasis on implications on wound healing in in vivo experiments.

Effect of Reduction Methods on the Properties of Composite Films of Bacterial Cellulose-Silver Nanoparticles

Composite films of bacterial cellulose-silver nanoparticles (BC-Ag) were prepared by different methods of in situ reduction of silver ions, using sodium hydroxide, ascorbic acid, chitosan, and UV irradiation. The effects of the reduction methods on their properties were investigated. The chitosan-reduced composite exhibited dispersed silver nanoparticles (AgNPs) within the nanocellulose matrix with the smallest size, while the ascorbic-reduced composite displayed the largest size. The incorporation of AgNPs tended to reduce the crystallinity of the composites, except for the ascorbic-reduced composite, which exhibited an increase in crystallinity. Mechanical testing revealed that the ascorbic-reduced composite had the highest Young's modulus of 8960 MPa, whereas the UV-reduced composite had the highest tensile strength and elongation at break. Thermal analysis of BC-Ag composites indicated similar glass transition temperature and decomposition profiles to BC, with additional weight-loss steps at high temperatures. The sodium hydroxide-reduced composite demonstrated the highest electrical conductivity of 1.1 × 10^-7 S/cm. Water absorption capacity was reduced by the incorporation of AgNPs, except for the chitosan-reduced composite, which showed an enhanced water absorption capacity of 344%. All BC-Ag composites displayed very strong antibacterial activities against Staphylococcus aureus and Escherichia coli. These results also highlight the potential uses of BC-Ag composites for various applications.

Development and Application of nanoPCR Method for Detection of Feline Panleukopenia Virus

Feline panleukopenia (FP) is a severe viral illness caused by the feline panleukopenia virus (FPV), putting sectors like companion cat breeding and endangered feline conservation at risk. The virus has a high morbidity and fatality rate and is found all over the world. We created a novel FPV assay using nanoPCR technology and assessed the method's specificity and sensitivity. The approach amplified a 345 bp nucleic acid fragment with a minimum detection limit of 7.97 × 10² copies/μL, which is about 100 times greater than traditional PCR. We collected anal swabs from 83 cats suspected of FPV infection for practical application, and the FPV-positive rate determined by the nanoPCR approach was 77.1%. In conclusion, the approach is more sensitive than conventional PCR and more convenient and cost-effective than qPCR methodology and may be utilized for the clinical detection of FPV.

Protein Adsorption, Calcium-Binding Ability, and Biocompatibility of Silver Nanoparticle-Loaded Polyvinyl Alcohol (PVA) Hydrogels Using Bone Marrow-Derived Mesenchymal Stem Cells

Several approaches have evolved to facilitate the exploration of hydrogel systems in biomedical research. In this sense, poly(vinyl alcohol) (PVA) has been widely used in hydrogel (HG) fabrication for several therapeutic applications. The biological properties of PVA hydrogels (PVA-HGs) are highly dependent on their interaction with protein receptors and extracellular matrix (mainly calcium) deposition, for which there is not enough evidence from existing research yet. Thus, for the first time, the functional properties, like protein and mineral interactions, related to the proliferation of mesenchymal stem cells (MSCs) by silver nanoparticle (AgNP)-loaded PVA hydrogels (AgNPs-PVA-HGs) were investigated in the present study. The UV absorption spectrum and TEM microscopic results showed a maximum absorbance of synthesized AgNPs at 409 nm, with an average particle size of 14.5 ± 2.5 nm, respectively. The functional properties, such as the calcium-binding and the protein adsorption of PVA-HG, were accelerated by incorporating AgNPs; however, the swelling properties of the HGs were reduced by AgNPs, which might be due to the masking of the free functional groups (hydroxyl groups of PVA) by AgNPs. SEM images showed the presence of AgNPs with a more porous structure in the HGs. The proliferative effect of MSCs increased over culture time from day 1 to day 7, and the cell proliferative effect was upregulated by HGs with more pronounced AgNPs-PVA-HG. In addition, both HGs did not produce any significant cytotoxicity in the MSCs. The histological (bright light and H&E staining) and fluorescence microscopic images showed the presence of a cytoskeleton and the fibrillar structure of the MSCs, and the cells adhered more firmly to all HGs. More fibrillar bipolar and dense fibrillar structures were seen in the day 1 and day 7 cultures, respectively. Interestingly, the MSCs cultured on AgNPs-PVA-HG produced extracellular matrix deposition on day 7. Accordingly, the present results proved the biocompatibility of AgNPs-PVA-HG as a suitable system for culturing mammalian stem cells for regenerative tissue applications.

Antibacterial, injectable, and adhesive hydrogel promotes skin healing

With the development of material science, hydrogels with antibacterial and wound healing properties are becoming common. However, injectable hydrogels with simple synthetic methods, low cost, inherent antibacterial properties, and inherent promoting fibroblast growth are rare. In this paper, a novel injectable hydrogel wound dressing based on carboxymethyl chitosan (CMCS) and polyethylenimine (PEI) was discovered and constructed. Since CMCS is rich in -OH and -COOH and PEI is rich in -NH₂, the two can interact through strong hydrogen bonds, and it is theoretically feasible to form a gel. By changing their ratio, a series of hydrogels can be obtained by stirring and mixing with 5 wt% CMCS aqueous solution and 5 wt% PEI aqueous solution at volume ratios of 7:3, 5:5, and 3:7. Characterized by morphology, swelling rate, adhesion, rheological properties, antibacterial properties, in vitro biocompatibility, and in vivo animal experiments, the hydrogel has good injectability, biocompatibility, antibacterial (Staphylococcus aureus: 56.7 × 10⁷ CFU/mL in the blank group and 2.5 × 10⁷ CFU/mL in the 5/5 CPH group; Escherichia coli: 66.0 × 10⁷ CFU/mL in the blank group and 8.5 × 10⁷ CFU/mL in the 5/5 CPH group), and certain adhesion (0.71 kPa in the 5/5 CPH group) properties which can promote wound healing (wound healing reached 98.02% within 14 days in the 5/5 CPH group) and repair of cells with broad application prospects.

Cellulose-Based Metallogels-Part 1: Raw Materials and Preparation

Metallogels are a class of materials produced by the complexation of polymer gels with metal ions that can form coordination bonds with the functional groups of the gel. Hydrogels with metal phases attract special attention due to the numerous possibilities for functionalization. Cellulose is preferable for the production of hydrogels from economic, ecological, physical, chemical, and biological points of view since it is inexpensive, renewable, versatile, non-toxic, reveals high mechanical and thermal stability, has a porous structure, an imposing number of reactive OH groups, and good biocompatibility. Due to the poor solubility of natural cellulose, the hydrogels are commonly produced from cellulose derivatives that require multiple chemical manipulations. However, there is a number of techniques of hydrogel preparation via dissolution and regeneration of non-derivatized cellulose of various origins. Thus, hydrogels can be produced from plant-derived cellulose, lignocellulose and cellulose wastes, including agricultural, food and paper wastes. The advantages and limitations of using solvents are discussed in this review with regard to the possibility of industrial scaling up. Metallogels are often formed on the basis of ready-made hydrogels, which is why the choice of an adequate solvent is important for obtaining desirable results. The methods of the preparation of cellulose metallogels with d-transition metals in the present state of the art are reviewed.

Advances in Functional Hydrogel Wound Dressings: A Review

One of the most advanced, promising, and commercially viable research issues in the world of hydrogel dressing is gaining functionality to achieve improved therapeutic impact or even intelligent wound repair. In addition to the merits of ordinary hydrogel dressings, functional hydrogel dressings can adjust their chemical/physical properties to satisfy different wound types, carry out the corresponding reactions to actively create a healing environment conducive to wound repair, and can also control drug release to provide a long-lasting benefit. Although a lot of in-depth research has been conducted over the last few decades, very few studies have been properly summarized. In order to give researchers a basic blueprint for designing functional hydrogel dressings and to motivate them to develop ever-more intelligent wound dressings, we summarized the development of functional hydrogel dressings in recent years, as well as the current situation and future trends, in light of their preparation mechanisms and functional effects.

Production of novel elastic bacterial nanocellulose/polyvinyl alcohol conduits via mercerization and phase separation for small-caliber vascular grafts application

Size and properties of tubular bacterial nanocellulose (BNC) can be regulated by controllable mercerization with thinner tube walls, better mechanical properties, and improved biocompatibility. Although mercerized BNC (MBNC) conduits have considerable potential as small-caliber vascular grafts (<6 mm), poor suture retention and lack of compliance that cannot match natural blood vessels increase the difficulty of surgery and limit potential clinical application. Polyvinyl alcohol (PVA) is a kind of hydrophilic polymer with good biocompatibility and elasticity, which can precipitate in alkaline solutions. In this study, novel elastic mercerized BNC/PVA conduits (MBP) are manufactured combining mercerization of BNC tubes with precipitation and phase separation of PVA with thinner tube wall, improved suture retention, better elasticity, good hemocompatibility and great cytocompatibility. The MBP obtained with 12.5 % PVA is selected for transplantation in a rat abdominal aorta model. For 32 weeks, normal blood flow is observed using Doppler sonographic inspection, which demonstrates long-term patency. Immunofluorescence staining results also indicate the formation of endothelium and smooth muscle layers. The results indicate the introduction of PVA, and its phase separation into mercerization of tubular BNC can endow MBP conduits with better compliance and suture retention, making it a promising candidate for blood vessel replacement.

Injectable Carrier-Free Hydrogel Dressing with Anti-Multidrug-Resistant Staphylococcus aureus and Anti-Inflammatory Capabilities for Accelerated Wound Healing

Antibacterial hydrogels have gradually become a powerful weapon to treat bacterially infected wounds and accelerate healing. In this paper, we designed a small-molecule self-healing antibacterial hydrogel containing 100% drug-loaded benzyl 3β-amino-11-oxo-olean-12-en-30-oate (GN-Bn), which was governed by π-π stacking, hydrogen bonding, and van der Waals forces. Due to the carrier-free design concept, the problems of interbatch variability during sample preparation and carrier-related toxicity can be effectively avoided. Moreover, the GN-Bn hydrogel exhibited promising antibacterial activities against multidrug-resistant Staphylococcus aureus (MRSA). The minimum inhibitory concentration (MIC) of the GN-Bn hydrogel was 1.5625 nmol/mL, which was lower than those against clinical agents such as norfloxacin, penicillin, and tetracycline. This is attributed to its unique antibacterial mechanism that aims at killing bacteria or preventing their growth by regulating arginine biosynthesis and metabolism through both transcriptomic (RNA-seq) analysis and quantitative polymerase chain reaction (qPCR) analysis. In addition, the GN-Bn hydrogel can also inhibit proinflammatory cytokines (TNF-α, IL-1β, and IL-6) to promote wound healing. Collectively, the GN-Bn hydrogel elicited dual therapeutic effects on an MRSA-infected full-thickness skin wound model through its antibacterial and anti-inflammatory activities, which is attributed to the fact that the GN-Bn hydrogel has multiple advantages including sufficient mechanical stability, biocompatibility, and unique antibacterial mechanisms, making it significantly accelerate MRSA-infected full-thickness skin wound healing as a wound dressing. In a word, the GN-Bn antibacterial hydrogel dressing with an anti-inflammatory and antibacterial bifunctional material holds great potential in clinical application.

Multifunctional dual cross-linked poly (vinyl alcohol)/methacrylate hyaluronic acid/chitooligosaccharide-sinapic acid wound dressing hydrogel

Wound dressing hydrogel with multifunctional properties, including antioxidant and antimicrobial properties and appropriate mechanical, biological, and physical properties is of great interest in wound healing application and it is still a challenge. In the present study, chitooligosaccharides (COS)/ sinapic acid (SA) conjugate (COS-SA) was synthesized using H₂O₂-induced grafting polymerization, and photo cross-linkable hyaluronic acid was synthesized using methacrilation (HAMA). The synthesis of COS-SA and HAMA was confirmed by Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, ultraviolet spectroscopy, and polyphenol assay. Subsequently, we developed duel cross-linked polyvinyl alcohol (PVA)/HAMA composite hydrogel encapsulated with COS-SA as an antioxidant and antimicrobial dressing for full-thickness wound healing application. The chemical, physical, mechanical, antioxidant, antimicrobial, in vitro biocompatibility, and in vivo wound healing properties of hydrogels were subsequently investigated. The results showed that the fabricated composite hydrogel had a uniform porous architecture, excellent fluid absorbability, and appropriate mechanical stability. The introduction of COSs-SA conjugate remarkably enhanced the in vitro biocompatibility, antioxidant, and antimicrobial properties of the hydrogel, leading to the significant promotion of in vivo full-thickness wound closure, re-epithelization, granulation tissue formation, and collagen deposition indicating that COSs-SA incorporated PVA/HAMA hydrogel wound dressing has significant potential for chronic wound healing application.

Synthesis of silver/Fe3O4@chitosan@polyvinyl alcohol magnetic nanoparticles as an antibacterial agent for accelerating wound healing

Bacterial infection causes wound inflammation and slows wound healing, posing a great threat to human health, which needs to explore more antibacterial nanobiomaterials to promote wound healing. Therefore, this study was conducted to develop low-cost silver/Fe₃O₄@Chitosan@polyvinyl alcohol (Ag/Fe₃O₄@CS@PVA) via a one-pot method to promote healing in bacteria-infected wounds. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) confirmed that Ag/Fe₃O₄@CS@PVA was successfully prepared. In vitro antibacterial experiments demonstrated strong antibacterial activity of Ag/Fe₃O₄@CS@PVA against Escherichia coli and Staphylococcus aureus. The Ag/Fe₃O₄@CS@PVA destroyed the bacterial cell membrane or internal structure, thus resulting in cell death for antibacterial effects. Cytotoxicity and hemolysis rate tests showed that Ag/Fe₃O₄@CS@PVA posed fine biocompatibility. In addition, in vivo assays confirmed that Ag/Fe₃O₄@CS@PVA not only promoted the healing of wound infection caused by bacteria, but also had no toxic effect on mouse organs. Therefore, the low-cost Ag/Fe₃O₄@CS@PVA nanocomposites have great potential in controlling 'bacterial' pathogen.