Viruses adsorbed on musculoskeletal allografts are inactivated by terminal ethylene oxide disinfection

Strategies for Development of Synthetic Heart Valve Tissue Engineering Scaffolds

The current clinical solutions, including mechanical and bioprosthetic valves for valvular heart diseases, are plagued by coagulation, calcification, nondurability, and the inability to grow with patients. The tissue engineering approach attempts to resolve these shortcomings by producing heart valve scaffolds that may deliver patients a life-long solution. Heart valve scaffolds serve as a three-dimensional support structure made of biocompatible materials that provide adequate porosity for cell infiltration, and nutrient and waste transport, sponsor cell adhesion, proliferation, and differentiation, and allow for extracellular matrix production that together contributes to the generation of functional neotissue. The foundation of successful heart valve tissue engineering is replicating native heart valve architecture, mechanics, and cellular attributes through appropriate biomaterials and scaffold designs. This article reviews biomaterials, the fabrication of heart valve scaffolds, and their in-vitro and in-vivo evaluations applied for heart valve tissue engineering.

Reuse of Filtering Facepiece Respirators in the COVID-19 Era

The current COVID-19 pandemic has resulted in an immense and unforeseen increase in demand for personal protective equipment (PPE) for healthcare workers worldwide. Amongst other products, respirator masks are crucial to protect the users against transmission of the virus. Decontamination and reuse of the existing stock could be a solution to the shortage of new respirators. Based upon existing studies, it was found that (I) a solid quality control method is essential to test product reuse, (II) in-depth evaluation of the different parts of the filtering facepiece respirator (FFR) should be considered, and (III) communication of the reuse cycle is essential to take track of the amount of reuse, as this is limited to ensure quality. The goal of this paper is two-fold. First, we identify the impact of decontamination on the different parts of the FFRs and how the quality control should be performed. Two different types of FFRs are analysed within this paper, resulting in the recommendation of combining quantitative respirator mask fit testing with a thorough sensory evaluation of decontaminated FFRs to qualify them for reuse. Secondly, the possibilities of communication of this reuse to the eventual user are mapped through in-depth reasoning.

Tissue-derived decellularized extracellular matrices toward cartilage repair and regeneration

The inability of cartilage tissue to self-heal due to its avascular nature often leads to conditions such as osteoarthritis, traumatic rupture of cartilage, and osteochondrosis. The cartilage provides cushioning effects between the joints and avoids bone frictions. The extracellular matrix (ECM) of cartilage consists predominantly of collagens, elastin, proteoglycans and glycoproteins. A number of tissue engineered ECM derived biological scaffolds and matrices are available for cartilage regeneration. The decellularized tissues provide appropriate bioactive cues in the absence of cellular components, hence avoiding immunological issue. However, the decellularization process involves several cellular disruption techniques that may alter the ECM architecture affecting bioactivity. Therefore, development of cell-free cartilage biomaterials with unaltered ECM integrity and bioactivity is of paramount necessity by smart selection of modified techniques and agents. Herein, we described about various decellularization methods, agents, techniques, and their applications in tissue/cartilage decellularization. It also contemplates various difficulties and future perspectives to troubleshoot the existing obstructions in tissue-derived cartilage matrices and their applications.

A porcine xenograft-derived bone scaffold is a biocompatible bone graft substitute: An assessment of cytocompatibility and the alpha-Gal epitope

BACKGROUND

Xenografts are an attractive alternative to traditional bone grafts because of the large supply from donors with predictable morphology and biology as well as minimal risk of human disease transmission. Clinical series involving xenograft bone transplantation, most commonly from bovine sources, have reported poor results with frequent graft rejection and failure to integrate with host tissue. Failures have been attributed to residual alpha-Gal epitope in the xenograft which humans produce natural antibody against. To the authors' knowledge, there is currently no xenograft-derived bone graft substitute that has been adopted by orthopedic surgeons for routine clinical use.

METHODS

In the current study, a bone scaffold intended to serve as a bone graft substitute was derived from porcine cancellous bone using a tissue decellularization and chemical oxidation protocol. In vitro cytocompatibility, pathogen clearance, and alpha-Gal quantification tests were used to assess the safety of the bone scaffold intended for human use.

RESULTS

In vitro studies showed the scaffold was free of processing chemicals and biocompatible with mouse and human cell lines. When bacterial and viral pathogens were purposefully added to porcine donor tissue, processing successfully removed these pathogens to comply with sterility assurance levels established by allograft tissue providers. Critically, 98.5% of the alpha-Gal epitope was removed from donor tissue after decellularization as shown by ELISA inhibition assay and immunohistochemical staining.

CONCLUSIONS

The current investigation supports the biologic safety of bone scaffolds derived from porcine donors using a decellularization protocol that meets current sterility assurance standards. The majority of the highly immunogenic xenograft carbohydrate was removed from donor tissue, and these findings support further in vivo investigation of xenograft-derived bone tissue for orthopedic clinical application.

Effects of EDC-PEI heparinization on allogeneic vascular antigens and inflammation levels via a rat abdominal aorta transplantation model

The objective of this study was to investigate the possibility of increasing the remote patency rate of allogeneic vessel transplantation through studying the effects of N-ethyl-N-(3-dimethylaminopropyl)-carbodiimide and polyethyleneimine (EDC-PEI) heparinization on allogeneic vascular antigens and inflammation levels. Forty rats were randomly divided into the control group, the EDC group, the PEI group and the EDC-PEI group. The rat abdominal aorta was used as the object of study, and the transplanted blood vessels were pretreated with EDC as the water-soluble cross-linking agent and PEI as the heparin-coated carrier. A rat abdominal aorta allogeneic transplantation model was established. Ultrasonic examination was used for observation of patency of proximal and distal anastomosis in each group. The tissue repair after abdominal aorta transplantation in each group was examined by H&E staining. The biomechanics, denaturation temperature and blasting strength of each group were compared. The levels of IL-1, IL-6 and TNF-α in serum of rats were measured by ELISA method, and the expression of MHC-II and α-GAL antigens in blood vessels were detected by immunohistochemistry. There were different degrees of thickening and inflammatory cell aggregation in the abdominal aorta of rats in the control, EDC and PEI groups, but there was no obvious lesion in the EDC-PEI group. Compared with the four groups, the mechanical characteristics of the EDC group decreased significantly, and the stenosis rate of anastomotic stoma in the EDC group was higher than that in the EDC-PEI and PEI groups (P<0.05). The denaturation temperature of the PEI group was lower than that of the EDC and EDC-PEI groups (P<0.05). The mechanical property and vascular bursting strength in the EDC-PEI group were similar to those in the control group. At the same time, it has more significant advantages than the other three groups in removing the vascular antigens MHC-II and α-GAL and reducing the level of inflammatory reaction, thus increasing the remote patency rate of allogeneic vascular transplantation. The inflammatory response and vascular antigenicity after transplantation are effectively reduced via the rat abdominal aorta transplantation model treated with allogeneic EDC-PEI heparinization, which has a higher remote patency rate.

Disinfection of human musculoskeletal allografts in tissue banking: a systematic review

Musculoskeletal allografts are typically disinfected using antibiotics, irradiation or chemical methods but protocols vary significantly between tissue banks. It is likely that different disinfection protocols will not have the same level of microorganism kill; they may also have varying effects on the structural integrity of the tissue, which could lead to significant differences in terms of clinical outcome in recipients. Ideally, a disinfection protocol should achieve the greatest bioburden reduction with the lowest possible impact on tissue integrity. A systematic review of three databases found 68 laboratory and clinical studies that analyzed the microbial bioburden or contamination rates of musculoskeletal allografts. The use of peracetic acid–ethanol or ionizing radiation was found to be most effective for disinfection of tissues. The use of irradiation is the most frequently published method for the terminal sterilization of musculoskeletal allografts; it is widely used and its efficacy is well documented in the literature. However, effective disinfection results were still observed using the BioCleanse™ Tissue Sterilization process, pulsatile lavage with antibiotics, ethylene oxide, and chlorhexidine. The variety of effective methods to reduce contamination rate or bioburden, in conjunction with limited high quality evidence provides little support for the recommendation of a single bioburden reduction method.

Sterilization techniques for biodegradable scaffolds in tissue engineering applications

Biodegradable scaffolds have been extensively studied due to their wide applications in biomaterials and tissue engineering. However, infections associated with in vivo use of these scaffolds by different microbiological contaminants remain to be a significant challenge. This review focuses on different sterilization techniques including heat, chemical, irradiation, and other novel sterilization techniques for various biodegradable scaffolds. Comparisons of these techniques, including their sterilization mechanisms, post-sterilization effects, and sterilization efficiencies, are discussed.

Allograft pretreatment for the repair of sciatic nerve defects: green tea polyphenols versus radiation

Pretreatment of nerve allografts by exposure to irradiation or green tea polyphenols can eliminate neuroimmunogenicity, inhibit early immunological rejection, encourage nerve regeneration and functional recovery, improve tissue preservation, and minimize postoperative infection. In the present study, we investigate which intervention achieves better results. We produced a 1.0 cm sciatic nerve defect in rats, and divided the rats into four treatment groups: autograft, fresh nerve allograft, green tea polyphenol-pretreated (1 mg/mL, 4°C) nerve allograft, and irradiation-pretreated nerve allograft (26.39 Gy/min for 12 hours; total 19 kGy). The animals were observed, and sciatic nerve electrophysiology, histology, and transmission electron microscopy were carried out at 6 and 12 weeks after grafting. The circumference and structure of the transplanted nerve in rats that received autografts or green tea polyphenol-pretreated nerve allografts were similar to those of the host sciatic nerve. Compared with the groups that received fresh or irradiation-pretreated nerve allografts, motor nerve conduction velocity in the autograft and fresh nerve allograft groups was greater, more neurites grew into the allografts, Schwann cell proliferation was evident, and a large number of new blood vessels was observed; in addition, massive myelinated nerve fibers formed, and abundant microfilaments and microtubules were present in the axoplasm. Our findings indicate that nerve allografts pretreated by green tea polyphenols are equivalent to transplanting autologous nerves in the repair of sciatic nerve defects, and promote nerve regeneration. Pretreatment using green tea polyphenols is better than pretreatment with irradiation.

Allografts in soft tissue reconstructive procedures: important considerations

CONTEXT

Allografts offer several important advantages over autografts in musculoskeletal reconstructive procedures, such as anterior cruciate ligament reconstruction. Despite growing widespread use of allograft tissue, serious concerns regarding safety and functionality remain. We discuss the latest knowledge of the potential benefits and risks of allograft use and offer a critical review of allograft tissue regulation, management, and sterilization to enable the surgeon to better inform athletes considering reconstructive surgery options.

EVIDENCE ACQUISITION

A review of sources published in the past 10 years is the primary basis of this research.

STUDY DESIGN

Observational analysis (cohort study).

LEVEL OF EVIDENCE

Level 3.

RESULTS

Comparable outcome data for autografts and allografts do not support universal standards for anterior cruciate ligament reconstruction, and physician recommendation and bias appear to significantly influence patient preference and satisfaction. Sterilization by gamma and electron-beam irradiation diminishes the biomechanical integrity of allograft tissue, but radioprotective agents such as collagen cross-linking and free radical scavengers appear to have potential in mitigating the deleterious effects of irradiation and preserving tissue strength and stability.

CONCLUSION

Allografts offer greater graft availability and reduced morbidity in orthopaedic reconstructive procedures, but greater expansion of their use by surgeons is challenged by the need to maintain tissue sterility and biomechanical functionality. Advances in the radioprotection of irradiated tissue may lessen concerns regarding allograft safety and structural stability.

Mycobacteria inactivation using Engineered Water Nanostructures (EWNS)

Airborne transmitted pathogens such as Mycobacterium tuberculosis (Mtb) cause serious, often fatal infectious disease with enormous global health implications. Due to their unique cell wall and slow growth, mycobacteria are among the most resilient microbial forms. Herein we evaluate the ability of an emerging, chemical-free, nanotechnology-based method to inactivate M. parafortuitum (Mtb surrogate). This method is based on the transformation of atmospheric water vapor into engineered water nano-structures (EWNS) via electrospray. We demonstrate that the EWNS can interact with and inactivate airborne mycobacteria, reducing their concentration levels significantly. Additionally, EWNS can inactivate M. parafortuitum on surfaces eight times faster than the control. The mechanism of mycobacteria inactivation was also investigated in this study. It was demonstrated that the EWNS effectively deliver the reactive oxygen species, encapsulated during the electrospray process, to the bacteria oxidizing their cell membrane resulting into inactivation. Overall, this is a method with the potential to become an effective intervention technology in the battle against airborne infections.

FROM THE CLINICAL EDITOR

This study demonstrates the feasibility of mycobacterium inactivation in airborne form or on contact surfaces using electrospray activated water nano-structures. Given that the method is free of toxic chemicals, this might become an important tool in the prevention of mycobacterial infections, which are notoriously hard to treat.

Is hepatitis B-virucidal validation of biocides possible with the use of surrogates?

The hepatitis B virus (HBV) is considered to be a major public health problem worldwide, and a significant number of reports on nosocomial outbreaks of HBV infections have been reported. Prevention of indirect HBV transmission by contaminated objects is only possible through the use of infection-control principles, including the use of chemical biocides, which are proven to render the virus non-infectious. The virucidal activity of biocides against HBV cannot be predicted; therefore, validation of the virucidal action of disinfectants against HBV is essential. However, feasible HBV infectivity assays have not yet been established. Thus, surrogate models have been proposed for testing the efficacy of biocides against HBV. Most of these assays do not correlate with HBV infectivity. Currently, the most promising and feasible assay is the use of the taxonomically related duck hepatitis B virus (DHBV), which belongs to the same Hepadnaviridae virus family. This paper reviews the application of DHBV, which can be propagated in vitro in primary duck embryonic hepatocytes, for the testing of biocides and describes why this model can be used as reliable method to evaluate disinfectants for efficacy against HBV. The susceptibility levels of important biocides, which are often used as ingredients for commercially available disinfectants, are also described.

Viral Inactivation of Human Osteochondral Grafts with Methylene Blue and Light

OBJECTIVE

Cartilage injury is one of the most common disorders of synovial joints. Fresh osteochondral allografts are becoming a standard treatment; however, they are supply constrained with a potential risk of disease transmission. There are no known virucidal processes available for osteochondral allografts and most methods presently available are detrimental to cartilage. Methylene blue light treatment has been shown to be successful in the literature for viral inactivation of fresh frozen plasma. The purpose of this study was to determine the capacity of methylene blue light treatment to inactivate a panel of clinically relevant viruses inoculated onto osteochondral allografts.

DESIGN

Osteochondral grafts recovered from human cadaveric knees were inoculated with one of the following viruses: bovine viral diarrhea virus (BVDV), hepatitis A virus (HAV), human immunodeficiency virus type 1 (HIV-1), porcine parvovirus (PPV), and pseudorabies virus (PrV). The samples were processed through a methylene blue light treatment, which consisted of an initial soak in nonilluminated circulating methylene blue at ambient temperature, followed by light exposure with circulating methylene blue at cool temperatures. The final titer was compared with the recovery control for the viral log reduction.

RESULTS

HIV-1, BVDV, and PrV were reduced to nondetectable levels while HAV and PPV were reduced by 3.1 and 5.6 logs, respectively.

CONCLUSIONS

The methylene blue light treatment was effective in reducing (a) enveloped DNA and RNA viruses to nondetectable levels and (b) nonenveloped DNA and RNA viruses of inoculated human osteochondral grafts by 3.1 to 5.6 logs. This study demonstrates the first practical method for significantly reducing viral load in osteochondral implants.

A chemical free, nanotechnology-based method for airborne bacterial inactivation using engineered water nanostructures

Airborne pathogens are associated with the spread of infectious diseases and increased morbidity and mortality. Herein we present an emerging chemical free, nanotechnology-based method for airborne pathogen inactivation. This technique is based on transforming atmospheric water vapor into Engineered Water Nano-Structures (EWNS) via electrospray. The generated EWNS possess a unique set of physical, chemical, morphological and biological properties. Their average size is 25 nm and they contain reactive oxygen species (ROS) such as hydroxyl and superoxide radicals. In addition, EWNS are highly electrically charged (10 electrons per particle on average). A link between their electric charge and the reduction of their evaporation rate was illustrated resulting in an extended lifetime (over an hour) at room conditions. Furthermore, it was clearly demonstrated that the EWNS have the ability to interact with and inactivate airborne bacteria. Finally, inhaled EWNS were found to have minimal toxicological effects, as illustrated in an acute in-vivo inhalation study using a mouse model. In conclusion, this novel, chemical free, nanotechnology-based method has the potential to be used in the battle against airborne infectious diseases.

Demineralized bone matrix in bone repair: history and use

Demineralized bone matrix (DBM) is an osteoconductive and osteoinductive commercial biomaterial and approved medical device used in bone defects with a long track record of clinical use in diverse forms. True to its name and as an acid-extracted organic matrix from human bone sources, DBM retains much of the proteinaceous components native to bone, with small amounts of calcium-based solids, inorganic phosphates and some trace cell debris. Many of DBM's proteinaceous components (e.g., growth factors) are known to be potent osteogenic agents. Commercially sourced as putty, paste, sheets and flexible pieces, DBM provides a degradable matrix facilitating endogenous release of these compounds to the bone wound sites where it is surgically placed to fill bone defects, inducing new bone formation and accelerating healing. Given DBM's long clinical track record and commercial accessibility in standard forms and sources, opportunities to further develop and validate DBM as a versatile bone biomaterial in orthopedic repair and regenerative medicine contexts are attractive.

Inactivation of influenza A virus H1N1 by disinfection process

BACKGROUND

Because any patient, health care worker, or visitor is capable of transmitting influenza to susceptible persons within hospitals, hospital-acquired influenza has been a clinical concern. Disinfection and cleaning of medical equipment, surgical instruments, and hospital environment are important measures to prevent transmission of influenza virus from hospitals to individuals. This study was conducted to evaluate the efficacy of disinfection processes, which can be easily operated at hospitals, in inactivating influenza A virus H1N1 (H1N1).

METHODS

The effects of 0.1 mol/L NaOH, 70% ethanol, 70% 1-propanol, solvent/detergent (S/D) using 0.3% tri (n-butyl)-phosphate and 1.0% Triton X-100, heat, and ethylene oxide (EO) treatments in inactivating H1N1 were determined. Inactivation of H1N1 was kinetically determined by the treatment of disinfectants to virus solution. Also, a surface test method, which involved drying an amount of virus on a surface and then applying the inactivation methods for 1 minute of contact time, was used to determine the virucidal activity.

RESULTS

H1N1 was completely inactivated to undetectable levels in 1 minute of 70% ethanol, 70% 1-propanol, and solvent/detergent treatments in the surface tests as well as in the suspension tests. H1N1 was completely inactivated in 1 minute of 0.1 mol/L NaOH treatment in the suspension tests and also effectively inactivated in the surface tests with the log reduction factor of 3.7. H1N1 was inactivated to undetectable levels within 5 minutes, 2.5 minutes, and 1 minute of heat treatment at 70, 80, and 90 degrees C, respectively in the suspension tests. Also, H1N1 was completely inactivated by EO treatment in the surface tests.

CONCLUSION

Common disinfectants, heat, and EO tested in this study were effective at inactivating H1N1. These results would be helpful in implementing effective disinfecting measures to prevent hospital-acquired infections.

Overview of safety issues concerning the preparation and processing of soft-tissue allografts

With the increasing use of allograft tissue and the recent infections found in patients undergoing surgical procedures, the current practices that prepare grafts for implantation must be examined. Initially, most tissue banks harvest allografts aseptically. There are many steps in the different techniques of preparation and processing of allograft tissue. Before allograft tissue is ready for clinical use, it undergoes specific disinfection methods, according to the individual tissue bank's specific process. Tissue banks use in-process bactericidal and virucidal steps via physical cleaning, chemical treatments, or application of irradiation to the allografts (or some combination thereof). Gamma irradiation may also be used as a terminal processing method to reach an assurance of sterility after the allograft has been packaged. Because of the allograft toxicity potential, the use of ethylene oxide as a final tissue sterilization measure is really nonexistent. The role of the Food and Drug Administration and American Association of Tissue Banks in allograft tissue handling is presented, as well as the new rules that regulate tissue banks and affect their processing methods.

Development of a bacteriophage model system to investigate virus inactivation methods used in the treatment of bone allografts

Bone allografts are commonly used in a variety of surgical procedures, to reconstruct lost bone stock and to provide mechanical support during the healing process. Due to concerns regarding the possibility of disease transmission from donor to recipient, and of contamination of grafts during retrieval and processing procedures, it is common practice to sterilise bone allografts prior to issue for clinical use. It is vital that the sterilisation processes applied to allografts are validated to demonstrate that they achieve the required level of bioburden reduction, and by extension that validated models are used for these studies. Two common sterilisation protocols applied to bone allografts are gamma irradiation and ethylene oxide gas sterilisation, and there are currently no validated models available for measuring the anti-viral efficacy of ethylene oxide treatment with regard to bone allografts or readily useable models for assessing the anti-viral efficiency of gamma irradiation treatment. We have developed and validated models for both these sterilisation processes, using the bacteriophage varphix174, and utilised the models to measure the antiviral activity of the standard ethylene oxide and gamma irradiation sterilisation processes applied to bone allografts by the National Blood Service. For the irradiation model, we also utilised bacterial spores (Bacillus pumilus). Our results show that ethylene oxide sterilisation (which can only be applied to lyophilised grafts) inactivated > 6.1 log(10) of the model virus, and gamma irradiation (at 25 -40 kGy and applied to frozen allografts) inactivated 3.6 - 4.0 log(10) of the model virus and > 4 log(10) of the bacterial spores. Gamma irradiation at this dosage is therefore not in itself a sterilisation process with respect to viruses.